Prior to 1.5.0 the git-lost-found utility was useful to locate
commits that were not referenced by any ref. These were often
amends, or resets, or tips of branches that had been deleted.
Being able to locate a 'lost' commit and recover it by creating a
new branch was a useful feature in those days.
Unfortunately 1.5.0 added the reflogs to the reachability analysis
performed by git-fsck, which means that most commits users would
consider to be lost are still reachable through a reflog. So most
(or all!) commits are reachable, and nothing gets output from
git-lost-found.
Now git-fsck can be told to ignore reflogs during its reachability
analysis, making git-lost-found useful again to locate commits
that are no longer referenced by a ref itself, but may still be
referenced by a reflog.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/bisect:
make the previous optimization work also on path-limited rev-list --bisect
rev-list --bisect: Fix "halfway" optimization.
t6004: add a bit more path optimization test.
git-rev-list --bisect: optimization
git-rev-list: add --bisect-vars option.
t6002: minor spelling fix.
* fl/doc:
Documentation: unbreak user-manual.
Documentation: Add version information to man pages
Documentation: Replace @@GIT_VERSION@@ in documentation
This corrects the interface mistake of the previous one, and
gives a command line parameter to the only plumbing command that
currently needs it: "git-read-tree".
We can add the calls to set_alternate_index_output() to other
plumbing commands that update the index if/when needed.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When defined, this allows plumbing commands that update the
index (add, apply, checkout-index, merge-recursive, mv,
read-tree, rm, update-index, and write-tree) to write their
resulting index to an alternative index file while holding a
lock to the original index file. With this, git-commit that
jumps the index does not have to make an extra copy of the index
file, and more importantly, it can do the update while holding
the lock on the index.
However, I think the interface to let an environment variable
specify the output is a mistake, as shown in the documentation.
If a curious user has the environment variable set to something
other than the file GIT_INDEX_FILE points at, almost everything
will break. This should instead be a command line parameter to
tell these plumbing commands to write the result in the named
file, to prevent stupid mistakes.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Not that this release really matters, as we will be doing
1.5.1 tomorrow. This commit is to tie the loose ends and
merge all of "maint" branch into "master" in preparation.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Mainly consistent usage of "git command" and not "git-command" syntax
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The git-cvsserver documentation claims that the server will set
-k modes if appropriate which is not really the case. On the other
hand the available gitcvs.allbinary variable is not documented at
all. Fix both these issues by rewording the related paragraph.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
git-upload-pack: make sure we close unused pipe ends
Documentation/git-rev-parse.txt: fix example in SPECIFYING RANGES.
Documentation/git-svnimport.txt: fix typo.
* 'master' of git://repo.or.cz/git/mergetool.git:
mergetool: Clean up description of files and prompts for merge resolutions
mergetool: Make git-rm quiet when resolving a deleted file conflict
mergetool: Add support for Apple Mac OS X's opendiff command
mergetool: Fix abort command when resolving symlinks and deleted files
mergetool: Remove spurious error message if merge.tool config option not set
mergetool: factor out common code
mergetool: portability fix: don't use reserved word function
mergetool: portability fix: don't assume true is in /bin
mergetool: Don't error out in the merge case where the local file is deleted
mergetool: Replace use of "echo -n" with printf(1) to be more portable
Fix minor formatting issue in man page for git-mergetool
Please see http://bugs.debian.org/404795:
In git-rev-parse(1), there is an example commit tree, which is used twice.
The explanation for this tree is very clear: B and C are commit *parents* to
A.
However, when the tree is reused as an example in the SPECIFYING RANGES, the
manpage author screws up and uses A as a commit *parent* to B and C! I.e.,
he inverts the tree.
And the fact that for this example you need to read the tree backwards is
not explained anywhere (and it would be confusing even if it was).
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This was noticed by Frederik Schwarzer. SVN's repository by default has
trunk, tags/, and branch_es_/.
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The previous one broke generated xml files for anything but manpages,
as it took the header for manpage unconditionally. This fixes it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Override the [header] macro of asciidoc's docbook
backend to add version information to the generated
man pages.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Include GIT-VERSION-FILE and replace @@GIT_VERSION@@ in
the HTML and XML asciidoc output. The documentation
doesn't depend on GIT-VERSION-FILE so it will not be
automatically rebuild if nothing else changed.
[jc: fixing the case for interrupted build]
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
user-manual: introduce "branch" and "branch head" differently
glossary: clean up cross-references
glossary: stop generating automatically
user-manual: Use def_ instead of ref_ for glossary references.
user-manual.txt: fix a tiny typo.
user-manual: run xsltproc without --nonet option
* 'maint' of git://linux-nfs.org/~bfields/git:
user-manual: introduce "branch" and "branch head" differently
glossary: clean up cross-references
glossary: stop generating automatically
user-manual: Use def_ instead of ref_ for glossary references.
user-manual.txt: fix a tiny typo.
user-manual: run xsltproc without --nonet option
This idea was suggested by Bill Lear
(Message-ID: <17920.38942.364466.642979@lisa.zopyra.com>)
and I think it is a very good one.
This patch adds a new test file for "git bisect run", but there
is currently only one basic test.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds --bisect-vars option to rev-list. The output is suitable
for `eval` in shell and defines five variables:
- bisect_rev is the next revision to test.
- bisect_nr is the expected number of commits to test after
bisect_rev is tested.
- bisect_good is the expected number of commits to test
if bisect_rev turns out to be good.
- bisect_bad is the expected number of commits to test
if bisect_rev turns out to be bad.
- bisect_all is the number of commits we are bisecting right now.
The documentation text was partly stolen from Johannes
Schindelin's patch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Allow to override the gitcvs.enabled and gitcvs.logfile configuration
variables for each access method (i.e. "ext" or "pserver") in the
form gitcvs.<method>.<var>
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
There has not been any work on the shallow stuff lately, so it is hard
to find out what it does, and how. This document describes the ideas
as well as the current problems, and can serve as a starting point for
shallow people.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Setting up a git-daemon came up the other day on IRC, and it is slightly
non trivial for the uninitiated.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I think we can start to slow down, as we now have covered
everything I listed earlier in the short-term release plan.
The last release 1.5.0 took painfully too long.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The new configuration variable core.deltaBaseCacheLimit allows the
user to control how much memory they are willing to give to Git for
caching base objects of deltas. This is not normally meant to be
a user tweakable knob; the "out of the box" settings are meant to
be suitable for almost all workloads.
We default to 16 MiB under the assumption that the cache is not
meant to consume all of the user's available memory, and that the
cache's main purpose was to cache trees, for faster path limiters
during revision traversal. Since trees tend to be relatively small
objects, this relatively small limit should still allow a large
number of objects.
On the other hand we don't want the cache to start storing 200
different versions of a 200 MiB blob, as this could easily blow
the entire address space of a 32 bit process.
We evict OBJ_BLOB from the cache first (credit goes to Junio) as
we want to favor OBJ_TREE within the cache. These are the objects
that have the highest inflate() startup penalty, as they tend to
be small and thus don't have that much of a chance to ammortize
that penalty over the entire data.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In the Linux kernel, for example, it's common to include Cc: lines
for cases when you want to remember to cc someone on a patch without
necessarily claiming they signed off on it. Make git-send-email
aware of these.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I was using "branch" to mean "head", but that's perhaps a little
sloppy; so instead start by using the terms "branch head" and "head",
while still quickly falling back on "branch", since that's what
people actually say more frequently.
Also include glossary references on the first uses of "head" and "tag".
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
The sort_glossary.pl script sorts the glossary, checks for duplicates,
and automatically adds cross-references.
But it's not so hard to do all that by hand, and sometimes the automatic
cross-references are a little wrong; so let's run the script one last
time and check in its output.
Note: to make the output fit better into the user manual I also deleted
the acknowledgements at the end, which was maybe a little rude; feel
free to object and I can find a different solution.
Cc: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
I'd like to start using references to the glossary in the user manual.
The "ref_" prefix for these references seems a little generic; so
replace with "def_".
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
"file patch" was doubtless intended to be "file path",
but "directory name" is clearer.
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
The --nonet option prevents xsltproc from going to the network to find
anything. But it always tries to find them locally first, so for a
user with the necessary docbook stylesheets installed the build will
work just fine without xsltproc attempting to use the network; all
--nonet does is make it fail rather than falling back on that. That
doesn't seem particularly helpful.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
* ar/diff:
Add tests for --quiet option of diff programs
try-to-simplify-commit: use diff-tree --quiet machinery.
revision.c: explain what tree_difference does
Teach --quiet to diff backends.
diff --quiet
Remove unused diffcore_std_no_resolve
Allow git-diff exit with codes similar to diff(1)
This patch adds support for a dummy remote '.' to avoid having
to declare a fake remote like
[remote "local"]
url = .
fetch = refs/heads/*:refs/heads/*
Such a builtin remote simplifies the operation of "git-fetch",
which will populate FETCH_HEAD but will not pretend that two
repositories are in use, will not create a thin pack, and will
not perform any useless remapping of names. The speed
improvement is around 20%, and it should improve more if
"git-fetch" is converted to a builtin.
To this end, git-parse-remote is grown with a new kind of
remote, 'builtin'. In git-fetch.sh, we treat the builtin remote
specially in that it needs no pack/store operations. In fact,
doing git-fetch on a builtin remote will simply populate
FETCH_HEAD appropriately.
The patch also improves of the --track/--no-track support,
extending it so that branch.<name>.remote items referring '.'
can be created. Finally, it fixes a typo in git-checkout.sh.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This introduces a new command-line option: --exit-code. The diff
programs will return 1 for differences, return 0 for equality, and
something else for errors.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Previous formulation could make it appear as removing all lines
matching a regexp (at least, I was looking for such a flag, and
confused this flag for what I was looking for).
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This avoids fetching new revisions remotely, and is usefuly
versus plain "git rebase" because the user does not have to
specify which remote head to rebase against.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Format some lists really as lists. Improves both html and man
output.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The git-mergetool program can be used to automatically run an appropriate
merge resolution program to resolve merge conflicts. It will automatically
run one of kdiff3, tkdiff, meld, xxdiff, or emacs emerge programs.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Chain-reply-to is a personal perference, and is unlikely to change from
patchset to patchset. Similarly, bcc is likely to have the same values
every invocation is one likes to bcc oneself.
So, allow both to be set via configuration variables.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Wishing to implement an email aliases file, I found that they were already
implmented. Document them for the next user.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Sergey Vlasov, Andy Parkins and Alex Riesen all pointed out that it
is possible for a single invocation of receive-pack to be given more
refs than the OS might allow us to pass as command line parameters
to a single hook invocation.
We don't want to break these up into multiple invocations (like
xargs might do) as that makes it impossible for the pre-receive
hook to verify multiple related ref updates occur at the same time,
and it makes it harder for post-receive to send out a single batch
notification.
Instead we pass the reference data on a pipe connected to the
hook's stdin, supplying one ref per line to the hook. This way a
single hook invocation can obtain an infinite amount of ref data,
without bumping into any operating system limits.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In order to track and build on top of a branch 'topic' you track from
your upstream repository, you often would end up doing this sequence:
git checkout -b mytopic origin/topic
git config --add branch.mytopic.remote origin
git config --add branch.mytopic.merge refs/heads/topic
This would first fork your own 'mytopic' branch from the 'topic'
branch you track from the 'origin' repository; then it would set up two
configuration variables so that 'git pull' without parameters does the
right thing while you are on your own 'mytopic' branch.
This commit adds a --track option to git-branch, so that "git
branch --track mytopic origin/topic" performs the latter two actions
when creating your 'mytopic' branch.
If the configuration variable branch.autosetupmerge is set to true, you
do not have to pass the --track option explicitly; further patches in
this series allow setting the variable with a "git remote add" option.
The configuration variable is off by default, and there is a --no-track
option to countermand it even if the variable is set.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
git.el: Retrieve commit log information from .dotest directory.
git.el: Avoid appending a signoff line that is already present.
setup_git_directory_gently: fix off-by-one error
user-manual: install user manual stylesheet with other web documents
user-manual: fix rendering of history diagrams
user-manual: fix missing colon in git-show example
user-manual: fix inconsistent use of pull and merge
user-manual: fix inconsistent example
glossary: fix overoptimistic automatic linking of defined terms
Documentation: s/seperator/separator/
Adjust reflog filemode in shared repository
* 'maint' of git://linux-nfs.org/~bfields/git:
user-manual: install user manual stylesheet with other web documents
user-manual: fix rendering of history diagrams
user-manual: fix missing colon in git-show example
user-manual: fix inconsistent use of pull and merge
user-manual: fix inconsistent example
glossary: fix overoptimistic automatic linking of defined terms
Asciidoc appears to interpret a backslash at the end of a line as
escaping the end-of-line character, which screws up the display of
history diagrams like
o--o--o
\
o--...
The obvious fix (replacing "\" by "\\") doesn't work. The only
workaround I've found is to include all such diagrams in a LiteralBlock.
Asciidoc claims that should be equivalent to a literal paragraph, so I
don't understand why the difference--perhaps it's an asciidoc bug.
Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
There should be a colon in this git-show example.
Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
I used "git pull ." instead of "git merge" here without any explanation.
Stick instead to "git merge" for now (the equivalent pull syntax is
still covered in a later chapter).
Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
The configuration file fragment here is inconsistent with the text
above. Thanks to Ramsay Jones for the correction.
Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
The script sort_glossary.pl turns each use of "term" into a link to the
definition of "term". To avoid mangling links like
gitlink:git-term[1]
it doesn't replace any occurence of "term" preceded by "link:git-".
This fails for gitlink:git-symbolic-ref[1] when substituting for "ref".
So instead just refuse to replace anything preceded by a "-".
That could result in missing some opportunities, but that's a less
annoying error.
Actually I find the automatic substitution a little distracting; some
day maybe we should just run it once and commit the result, so it can
be hand-tuned.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
The --interactive option behaves like "git commit", except that
"git add --interactive" is executed before committing. It is
incompatible with -a and -i.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* 'master' of git://repo.or.cz/git/fastimport:
Allow fast-import frontends to reload the marks table
Use atomic updates to the fast-import mark file
Preallocate memory earlier in fast-import
I'm giving fast-import a lesson on how to reload the marks table
using the same format it outputs with --export-marks. This way
a frontend can reload the marks table from a prior import, making
incremental imports less painful.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Bill Lear pointed out that it is easy to send out notifications of
changes with the update hook, but successful execution of the update
hook does not necessarily mean that the ref was actually updated.
Lock contention on the ref or being unable to append to the reflog
may prevent the ref from being changed. Sending out notifications
prior to the ref actually changing is very misleading.
To help this situation I am introducing two new hooks to the
receive-pack flow: pre-receive and post-receive. These new hooks
are invoked only once per receive-pack execution and are passed
three arguments per ref (refname, old-sha1, new-sha1).
The new post-receive hook is ideal for sending out notifications,
as it has the complete list of all refnames that were successfully
updated as well as the old and new SHA-1 values. This allows more
interesting notifications to be sent. Multiple ref updates could
be easily summarized into one email, for example.
The new pre-receive hook is ideal for logging update attempts, as it
is run only once for the entire receive-pack operation. It can also
be used to verify multiple updates happen at once, e.g. an update
to the `maint` head must also be accompained by a new annotated tag.
Lots of documentation improvements for receive-pack are included
in this change, as we want to make sure the new hooks are clearly
explained.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch adds support to archimport for remapping the branch
names to match those used in git more closely. This is useful
for projects that migrate to git (as opposed to users that want
to use git on Arch-based projects). For example, one can choose
an Arch branch name and call it "master".
The new command-line syntax works even if there is a colon in
a branch name, since only the part after the last colon is taken
to be the git name (git does not allow colons in branch names).
The new feature is implemented so that archives rotated every
year can also be remapped into a single git archive.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* 'master-for-junio' of git://repo.or.cz/git/fastimport:
fast-import: Fail if a non-existant commit is used for merge
fast-import: Avoid infinite loop after reset
* maint:
Fix diff-options references in git-diff and git-format-patch
Add definition of <commit-ish> to the main git man page.
Begin SubmittingPatches with a check list
fast-import: Fail if a non-existant commit is used for merge
fast-import: Avoid infinite loop after reset
Most of the git-diff-* documentation used [<common diff options>]
instead of [--diff-options], so make that change in git-diff and
git-format-patch.
In addition, git-format-patch didn't include the meanings of the diff
options.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It seems that some people prefer a short list to a long text. But even for
the latter group, a quick reminder list is useful. So, add a check list to
Documentation/SubmittingPatches of what to do to get your patch accepted.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Update the main git.html page to point at 1.5.0.3 documentation.
Update draft 1.5.1 release notes with what we have so far.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The existing --attach option did not create a true "attachment"
but multipart/mixed with Content-Disposition: inline. It should
have been with Content-Disposition: attachment.
Introduce --inline to add multipart/mixed that is inlined, and
make --attach to create an attachement.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* 'js/fetch-progress' (early part):
Fixup no-progress for fetch & clone
fetch & clone: do not output progress when not on a tty
Conflicts:
git-fetch.sh
* js/symlink:
Tell multi-parent diff about core.symlinks.
Handle core.symlinks=false case in merge-recursive.
Add core.symlinks to mark filesystems that do not support symbolic links.
* maint:
GIT 1.5.0.3
glossary: Add definitions for dangling and unreachable objects
user-manual: more detailed merge discussion
user-manual: how to replace commits older than most recent
user-manual: insert earlier of mention content-addressable architecture
user-manual: ensure generated manual references stylesheet
user-manual: reset to ORIG_HEAD not HEAD to undo merge
Documentation: mention module option to git-cvsimport
Define "dangling" and "unreachable" objects. Modified from original
text proposed by Yasushi Shoji.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add more details on conflict, including brief discussion of file stages.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
"Modifying" an old commit by checking it out, --amend'ing it, then
rebasing on top of it, is a slightly cumbersome technique, but I've
found it useful frequently enough to make it seem worth documenting.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The content-addressable design is too important not to be worth at least
a brief mention a little earlier on.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The generated user manual is rather hard to read thanks to the lack of
the css that's supposed to be included from docbook-xsl.css.
I'm totally ignorant of the toolchain; grubbing through xmlto and
related scripts, the easiest way I could find to ensure that the
generated html links to the stylesheet is by calling xsltproc directly.
Maybe there's some better way.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
As Linus pointed out recently on the mailing list,
git reset --hard HEAD^
doesn't undo a merge in the case where the merge did a fast-forward. So
the rcommendation here is a little dangerous.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The git-cvsimport argument that specifies a cvs module to import should
probably be included in the default example.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch documents the previously undocumented option --rename-section
and adds a new option to zap an entire section.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Unset NO_C99_FORMAT on Cygwin.
Fix a "pointer type missmatch" warning.
Fix some "comparison is always true/false" warnings.
Fix an "implicit function definition" warning.
Fix a "label defined but unreferenced" warning.
Document the config variable format.suffix
git-merge: fail correctly when we cannot fast forward.
builtin-archive: use RUN_SETUP
Fix git-gc usage note
Some file systems that can host git repositories and their working copies
do not support symbolic links. But then if the repository contains a symbolic
link, it is impossible to check out the working copy.
This patch enables partial support of symbolic links so that it is possible
to check out a working copy on such a file system. A new flag
core.symlinks (which is true by default) can be set to false to indicate
that the filesystem does not support symbolic links. In this case, symbolic
links that exist in the trees are checked out as small plain files, and
checking in modifications of these files preserve the symlink property in
the database (as long as an entry exists in the index).
Of course, this does not magically make symbolic links work on such defective
file systems; hence, this solution does not help if the working copy relies
on that an entry is a real symbolic link.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add the new --no-abbrev option to the man page for the git-branch command.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Another memory overrun in http-push.c
fetch.o depends on the headers, too.
Documentation: Correct minor typo in git-add documentation.
Documentation/git-send-email.txt: Fix labeled list formatting
Documentation/git-quiltimport.txt: Fix labeled list formatting
Documentation/build-docdep.perl: Fix dependencies for included asciidoc files
Fix some formatting problems:
- Some list labels were missing their "::" characters.
- Some of continuation paragraphs in labeled lists were incorrectly
formatted as literal paragraphs.
- In one case "[verse]" was missing before the config key list.
- The "Basic Examples" section was incorrectly nested inside the
"Config File-Only Options" section.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Mark continuation paragraphs of list entries as such to avoid
getting literal paragraphs instead.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Mark the continuation paragraph of a list entry as such to avoid
getting a literal paragraph instead.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Adding dependencies on included files to the generated man pages is
wrong - includes are processed by asciidoc, therefore the intermediate
Docbook XML files really depend on included files. Because of these
wrong dependencies the man pages were not rebuilt properly if the
intermediate XML files were left in the tree.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Start preparing Release Notes for 1.5.0.3
Documentation: git-remote add [-t <branch>] [-m <branch>] [-f] name url
Include config.mak in doc/Makefile
git.el: Set the default commit coding system from the repository config.
git-archimport: support empty summaries, put summary on a single line.
http-push.c::lock_remote(): validate all remote refs.
git-cvsexportcommit: don't cleanup .msg if not yet committed to cvs.
config.mak.autogen is already there. Without this change it is not
possible to override mandir in config.mak.
Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* 'js/diff-ni' (early part):
diff --no-index: also imitate the exit status of diff(1)
Fix typo: do not show name1 when name2 fails
Teach git-diff-files the new option `--no-index`
run_diff_{files,index}(): update calling convention.
update-index: do not die too early in a read-only repository.
git-status: do not be totally useless in a read-only repository.
* maint:
builtin-fmt-merge-msg: fix bugs in --file option
index-pack: Loop over pread until data loading is complete.
blameview: Fix the browse behavior in blameview
Fix minor typos/grammar in user-manual.txt
Correct ordering in git-cvsimport's option documentation
git-show: Reject native ref
Fix git-show man page formatting in the EXAMPLES section
A pair of commits on January 8th added option documentation (for -a,
-S and -L) in the middle of the documentation for the -A option. This
makes -A's documentation contiguous again.
Signed-off-by: Michael Poole <mdpoole@troilus.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix asciidoc markup so that the man page is properly formatted in the
EXAMPLES section.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* master: (201 commits)
Documentation: link in 1.5.0.2 material to the top documentation page.
Documentation: document remote.<name>.tagopt
GIT 1.5.0.2
git-remote: support remotes with a dot in the name
Documentation: describe "-f/-t/-m" options to "git-remote add"
diff --cc: fix display of symlink conflicts during a merge.
merge-recursive: fix longstanding bug in merging symlinks
merge-index: fix longstanding bug in merging symlinks
diff --cached: give more sensible error message when HEAD is yet to be created.
Update tests to use test-chmtime
Add test-chmtime: a utility to change mtime on files
Add Release Notes to prepare for 1.5.0.2
Allow arbitrary number of arguments to git-pack-objects
rerere: do not deal with symlinks.
rerere: do not skip two conflicted paths next to each other.
Don't modify CREDITS-FILE if it hasn't changed.
diff-patch: Avoid emitting double-slashes in textual patch.
Reword git-am 3-way fallback failure message.
Limit filename for format-patch
core.legacyheaders: Use the description used in RelNotes-1.5.0
...
Update config.txt with info regarding tagopt option
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
GIT 1.5.0.2
git-remote: support remotes with a dot in the name
Documentation: describe "-f/-t/-m" options to "git-remote add"
diff --cc: fix display of symlink conflicts during a merge.
* maint:
Add Release Notes to prepare for 1.5.0.2
Allow arbitrary number of arguments to git-pack-objects
rerere: do not deal with symlinks.
rerere: do not skip two conflicted paths next to each other.
Don't modify CREDITS-FILE if it hasn't changed.
To name a commit, you can now say
$ git rev-parse ':/Initial revision of "git"'
and it will return the hash of the youngest commit whose
commit message (the oneline) begins with the given prefix.
For future extension, a leading exclamation mark is treated
specially: if you want to match a commit message starting with
a '!', just repeat the exclamation mark. So, to match a commit
which starts with '!Hello World', use
$ git show ':/!!Hello World'
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
diff-patch: Avoid emitting double-slashes in textual patch.
Reword git-am 3-way fallback failure message.
Limit filename for format-patch
core.legacyheaders: Use the description used in RelNotes-1.5.0
git-show-ref --verify: Fail if called without a reference
Conflicts:
builtin-show-ref.c
diff.c
The intent of the commit 'fetch & clone: do not output progress when
not on a tty' was to make fetching and cloning less chatty when
output was not redirected (such as in a cron job).
However, there was a serious thinko in that commit. It assumed that
the client _and_ the server got this update at the same time. But
this is obviously not the case, and therefore upload-pack died on
seeing the option "--no-progress".
This patch fixes that issue by making it a protocol option. So, until
your server is updated, you still see the progress, but once the
server has this patch, it will be quiet.
A minor issue was also fixed: when cloning, the checkout did not
heed no_progress.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It explains what it does and why, and says how to use the new format.
Signed-off-by: Santi Béjar <sbejar@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Also, it turns out that SVN::Ra doesn't attempt to deal with
authentication or pass the username to ssh when doing svn+ssh://
URLs
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Since the options that affect the way metadata is handled in
git-svn, should be consistently set/unset throughout history
imported by git-svn; it makes sense to allow the user to set
certain options from the command-line that will write to the
config file when initially creating the repository.
Also, fix some formatting issues while we're updating
documentation.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This documents the 'clone' and 'rebase' commands
of git-svn. Additionaly, examples are updated
to use them instead of the lower-level 'init' and
'fetch' commands.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Force the showing of the --minimize flag as an option in the
'migrate' help.
Also, fix the usage function to correctly filter out
the deprecated aliases.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Make sure we flush our userspace buffers and and fsync(2)
.rev_db information to disk if we use these options because
we really don't want to lose this information.
Also, disallow --use-svm-props and --no-metadata from the
command-line because history will be inconsistent if they're
only used occasionally. If a user wants to use these options,
they must be set in the config so they're always on.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
--no-follow-parent disables and reverts it back to the old
default behavior of not following parents (if you don't care for
full history).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
--svn-remote allows the default remote name to be overridden (useful
for tracking multiple SVN repositories).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Since refs/remotes/* are not automatically cloned, we expect the
user to be capable of copying those references themselves
anyways.
Also removed the documentation for --ignore-nodate while we're
at it; it has also been made automatic.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
It's not really useful anymore now that we have a better
--follow-parent for the valid cases. Any other use
of it is not valid.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Some workflows require use of repositories on machines that cannot be
connected, preventing use of git-fetch / git-push to transport objects and
references between the repositories.
git-bundle provides an alternate transport mechanism, effectively allowing
git-fetch and git-pull to operate using sneakernet transport. `git-bundle
create` allows the user to create a bundle containing one or more branches
or tags, but with specified basis assumed to exist on the target
repository. At the receiving end, git-bundle acts like git-fetch-pack,
allowing the user to invoke git-fetch or git-pull using the bundle file as
the URL. git-fetch and git-ls-remote determine they have a bundle URL by
checking that the URL points to a file, but are otherwise unchanged in
operation with bundles.
The original patch was done by Mark Levedahl <mdl123@verizon.net>.
It was updated to make git-bundle a builtin, and get rid of the tar
format: now, the first line is supposed to say "# v2 git bundle", the next
lines either contain a prerequisite ("-" followed by the hash of the
needed commit), or a ref (the hash of a commit, followed by the name of
the ref), and finally the pack. As a result, the bundle argument can be
"-" now.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
git-diff: fix combined diff
Fix 'git commit -a' in a newly initialized repository
Include git-gui credits file in dist.
Document the new core.bare configuration option.
With this patch,
$ git show -s \
--pretty=format:' Ze komit %h woss%n dunn buy ze great %an'
shows something like
Ze komit 04c5c88 woss
dunn buy ze great Junio C Hamano
The supported placeholders are:
'%H': commit hash
'%h': abbreviated commit hash
'%T': tree hash
'%t': abbreviated tree hash
'%P': parent hashes
'%p': abbreviated parent hashes
'%an': author name
'%ae': author email
'%ad': author date
'%aD': author date, RFC2822 style
'%ar': author date, relative
'%at': author date, UNIX timestamp
'%cn': committer name
'%ce': committer email
'%cd': committer date
'%cD': committer date, RFC2822 style
'%cr': committer date, relative
'%ct': committer date, UNIX timestamp
'%e': encoding
'%s': subject
'%b': body
'%Cred': switch color to red
'%Cgreen': switch color to green
'%Cblue': switch color to blue
'%Creset': reset color
'%n': newline
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With this flag and given two paths, git-diff-files behaves as a GNU diff
lookalike (plus the git goodies like --check, colour, etc.). This flag
is also available in git-diff. It also works outside of a git repository.
In addition, if git-diff{,-files} is called without revision or stage
parameter, and with exactly two paths at least one of which is not tracked,
the default is --no-index.
So, you can now say
git diff /etc/inittab /etc/fstab
and it actually works!
This also unifies the duplicated argument parsing between cmd_diff_files()
and builtin_diff_files().
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In response to a feature request from Shawn Pearce, this patch allows
a user to update a named group of remotes by using "git remote update
<group>", where the group is defined in the config file by
remotes.<group>. The default if the named group is not specified is
now fetched group remotes.default, instead of remote.fetch, which is
what had been previously used.
In addition, if remotes.default is not defined, all remotes defined in
the config file will be used, as before, but there is now also
possible to request that a particular repository to be skipped by
default by using the boolean configuration parameter
remote.<name>.skipDefaultUpdate.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is necessary if using CVS in an asymmetric fashion, i.e. when the
CVSROOT you are checking out from differs from the CVSROOT you have to
commit to.
Signed-off-by: Simon 'corecode' Schubert <corecode@fs.ei.tum.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The settings in /etc/gitconfig can be overridden in ~/.gitconfig,
which in turn can be overridden in .git/config.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds the option "--no-progress" to fetch-pack and upload-pack,
and makes fetch and clone pass this option when stdout is not a tty.
While at documenting that option, also document --strict and --timeout
options for upload-pack.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This allows users to use the command "git remote update" to update all
remotes that are being tracked in the repository.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation advertises the new `--depth <n>' parameter with an equal
sign, while the usage notes (shown after `git-clone --help') do not. If I
understood git-clone's source code correctly, the version without the
equal sign is correct, which is why this patch syncs documentation to the
usage note.
Signed-off-by: Christian Schlotter <schlotter@users.sourceforge.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Update draft release notes for 1.5.0.1
Convert update-index references in docs to add.
Attempt to improve git-rebase lead-in description.
Do not take mode bits from index after type change.
git-blame: prevent argument parsing segfault
Make gitk save and restore window pane position on Linux and Cygwin.
Make gitk save and restore the user set window position.
[PATCH] gitk: Use show-ref instead of ls-remote
[PATCH] Make gitk work reasonably well on Cygwin.
[PATCH] gitk - remove trailing whitespace from a few lines.
Change git repo-config to git config
Instead of (or, in addition to) --tags, to use only tags for naming,
you can now use --refs=<pattern> to specify a shell glob pattern
which the refs must match to be used for naming.
Example:
$ git name-rev --refs=*v1* 33db5f4d33db5f4d tags/v1.0rc1^0~1593
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since `git add` is the approved porcelain for an end-user to invoke
when they want to manipulate the index, porcelain documentation
should steer the user to this command rather than the pure plumbing
update-index.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It was mentioned on #git this morning that the lead-in description
of git-rebase is very confusing. Too many branch this and branch
that in a very short run of text.
This new description attempts to walk the user through the command
syntax, while also describing exactly what git-rebase is doing to
their repository.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
GIT-VERSION-FILE: check ./version first.
sha1_file.c: Round the mmap offset to half the window size.
Make sure packedgitwindowsize is multiple of (pagesize * 2)
Add RelNotes 1.5.0.1
Still updating 1.5.0 release notes.
git-daemon: Avoid leaking the listening sockets into child processes.
Clarify two backward incompatible repository options.
It was unclear if the backward compatible features were disabled
or the configuration variables that controls them were set to
false by default from the description. Obviously we meant the
former, but the problem was made worse by the fact that one
configuration variable breaks compatibility when set to true and
the other one breaks it when set to false.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Instead of running around listing the changes near the release,
let's keep things nicely organized by summarizing the changes as
we merge things to the 'master' branch.
I haven't decided how well this will go with people's patch
submission procedure yet --- we'll play it by the ear and see
what happens.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Makefile: update check-docs target
cmd-list: add git-remote
Documentation: Drop full-stop from git-fast-import title.
Minor corrections to release notes
Update section about warning when leaving a detached head.
Also fix a few indentations that weren't like the rest of the file.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This also adds a hook in the Makefile I can use to automatically
include pointers to documentation for older releases when updating
the pages at http://kernel.org/pub/software/scm/git/docs/.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The documentation still talked about the unnecessary 'safety'
in git-checkout.
Pointed out by Matthias Lederhofer.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The config variable gc.packrefs is tristate now: "true", "false"
and "notbare", where "notbare" is the default.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The old text suggested that git-update-server-info only needs to be run
if new tags or branches are created, but not for new commits.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It was suggested on the mailing list that being able to use `from`
in any commit to reset the current branch is useful in some types of
importers, such as a darcs importer.
We originally did not permit resetting an existing branch with a
new `from` command during a `commit` command, but this restriction
was only to help debug the hacked up cvs2svn that Jon Smirl was
developing in parallel with git-fast-import. It is probably more
of a problem to disallow it than to allow it. So now we permit a
`from` during any `commit`.
While making the changes required to permit multiple `from`
commands on the same branch, I discovered we no longer needed the
last_commit field to be set to 0 during a reset, so that was removed.
(Reset was originally setting the field to 0 to signal cmd_from()
that it was OK to execute on the branch.)
While poking around in this section of fast-import I also realized
the `reset` command was not working as intended if the corresponding
`from` command was omitted (as allowed by the BNF grammar and the
code). If `from` was omitted we cleared out the tree but we left
the tree SHA-1 and parent commit SHA-1 intact. This is not what
the user intended in this case. Instead they would be trying to
reset the branch to have no parent and to have no tree, making the
branch look new-born during the next commit. We now clear these
SHA-1 values during `reset`, ensuring the branch looks new-born if
`from` does not get supplied.
New test cases for these were also added.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
