* lt/rename:
Do the fuzzy rename detection limits with the exact renames removed
Fix ugly magic special case in exact rename detection
Do exact rename detection regardless of rename limits
Do linear-time/space rename logic for exact renames
copy vs rename detection: avoid unnecessary O(n*m) loops
Ref-count the filespecs used by diffcore
Split out "exact content match" phase of rename detection
Add 'diffcore.h' to LIB_H
This has been proposed for a few times without much reaction
from the list. Actually remove it to see who screams.
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option parser takes argc, argv, an array of struct option
and a usage string. Each of the struct option elements in the array
describes a valid option, its type and a pointer to the location where the
value is written. The entry point is parse_options(), which scans through
the given argv, and matches each option there against the list of valid
options. During the scan, argv is rewritten to only contain the
non-option command line arguments and the number of these is returned.
Aggregation of single switches is allowed:
-rC0 is the same as -r -C 0 (supposing that -C wants an arg).
Every long option automatically support the option with the same name,
prefixed with 'no-' to unset the switch. It assumes that initial value for
strings are "NULL" and for integers is "0".
Long options are supported either with '=' or without:
--some-option=foo is the same as --some-option foo
Acked-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This implements a smarter rename detector for exact renames, which
rather than doing a pairwise comparison (time O(m*n)) will just hash the
files into a hash-table (size O(n+m)), and only do pairwise comparisons
to renames that have the same hash (time O(n+m) except for unrealistic
hash collissions, which we just cull aggressively).
Admittedly the exact rename case is not nearly as interesting as the
generic case, but it's an important case none-the-less. A similar general
approach should work for the generic case too, but even then you do need
to handle the exact renames/copies separately (to avoid the inevitable
added cost factor that comes from the _size_ of the file), so this is
worth doing.
In the expectation that we will indeed do the same hashing trick for the
general rename case, this code uses a generic hash-table implementation
that can be used for other things too. In fact, we might be able to
consolidate some of our existing hash tables with the new generic code
in hash.[ch].
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The diffcore.h header file is included by more than just the internal
diff generation files, and needs to be part of the proper dependencies.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code generating perl/Makefile from Makefile.PL was causing trouble
because it didn't considered NO_PERL_MAKEMAKER and ran makemaker
unconditionally, rewriting perl.mak. Makemaker is FUBAR in ActiveState Perl,
and perl/Makefile has a replacement for it.
Besides, a changed Git.pm is *NOT* a reason to rebuild all the perl scripts,
so remove the dependency too.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* db/fetch-pack: (60 commits)
Define compat version of mkdtemp for systems lacking it
Avoid scary errors about tagged trees/blobs during git-fetch
fetch: if not fetching from default remote, ignore default merge
Support 'push --dry-run' for http transport
Support 'push --dry-run' for rsync transport
Fix 'push --all branch...' error handling
Fix compilation when NO_CURL is defined
Added a test for fetching remote tags when there is not tags.
Fix a crash in ls-remote when refspec expands into nothing
Remove duplicate ref matches in fetch
Restore default verbosity for http fetches.
fetch/push: readd rsync support
Introduce remove_dir_recursively()
bundle transport: fix an alloc_ref() call
Allow abbreviations in the first refspec to be merged
Prevent send-pack from segfaulting when a branch doesn't match
Cleanup unnecessary break in remote.c
Cleanup style nit of 'x == NULL' in remote.c
Fix memory leaks when disconnecting transport instances
Ensure builtin-fetch honors {fetch,transfer}.unpackLimit
...
Solaris 9 doesn't have mkdtemp() so we need to emulate it for the
rsync transport implementation. Since Solaris 9 is lacking this
function we can also reasonably assume it is not available on
Solaris 8 either. The new Makfile definition NO_MKDTEMP can be
set to enable the git compat version.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
There's a number of tricky conflicts between master and
this topic right now due to the rewrite of builtin-push.
Junio must have handled these via rerere; I'd rather not
deal with them again so I'm pre-merging master into the
topic. Besides this topic somehow started to depend on
the strbuf series that was in next, but is now in master.
It no longer compiles on its own without the strbuf API.
* master: (184 commits)
Whip post 1.5.3.4 maintenance series into shape.
Minor usage update in setgitperms.perl
manual: use 'URL' instead of 'url'.
manual: add some markup.
manual: Fix example finding commits referencing given content.
Fix wording in push definition.
Fix some typos, punctuation, missing words, minor markup.
manual: Fix or remove em dashes.
Add a --dry-run option to git-push.
Add a --dry-run option to git-send-pack.
Fix in-place editing functions in convert.c
instaweb: support for Ruby's WEBrick server
instaweb: allow for use of auto-generated scripts
Add 'git-p4 commit' as an alias for 'git-p4 submit'
hg-to-git speedup through selectable repack intervals
git-svn: respect Subversion's [auth] section configuration values
gtksourceview2 support for gitview
fix contrib/hooks/post-receive-email hooks.recipients error message
Support cvs via git-shell
rebase -i: use diff plumbing instead of porcelain
...
Conflicts:
Makefile
builtin-push.c
rsh.c
There were a few places which did not cope well without curl. This
fixes all of them. We still need to link against the walker.o part
of the library as some parts of transport.o still call into there
even though we don't have HTTP support enabled.
If compiled with NO_CURL=1 we now get the following useful error
message:
$ git-fetch http://www.example.com/git
error: git was compiled without libcurl support.
fatal: Don't know how to fetch from http://www.example.com/git
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Before this patch the clean target has removed the
configure script that comes with Git tar file.
That made compiling Git for different architectures
inconvenient.
This patch excludes configure from the files to be
deleted by 'make clean' and adds new target 'distclean'
to preserve old functionality.
Signed-off-by: Mathias Megyei <mathias@mnet-mail.de>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The current makefile supports ctags but not cscope. Some people prefer
cscope (I do), so this patch adds a cscope target.
I've also added cscope* to the .gitignore file. For some reason tags
and TAGS weren't in there either so I've added them too.
Signed-off-by: Kristof Provost <Kristof@provost-engineering.be>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
convert-objects was needed to convert from an old-style repository,
which hashed the compressed contents and used a different date format.
Such repositories are presumably no longer common and, if such
conversions are necessary, should be done by writing a frontend for
git-fast-import.
Linus, the original author, is OK with moving it to contrib.
Signed-off-by: Matt Kraai <kraai@ftbfs.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Do not over-quote the -f envelopesender value.
unexpected Make output (e.g. from --debug) causes build failure
Fixed minor typo in t/t9001-send-email.sh test command line.
Without this, the extra output produced e.g., by "make --debug"
would go into $INSTLIBDIR and then cause the sed command to fail.
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Any changes to transport.h probably will require rebuilding a
number of object files so we should make sure it is included
in our set of headers.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thanks to Johannes Schindelin for review and fixes, and Julian
Phillips for the original C translation.
This changes a few small bits of behavior:
branch.<name>.merge is parsed as if it were the lhs of a fetch
refspec, and does not have to exactly match the actual lhs of a
refspec, so long as it is a valid abbreviation for the same ref.
branch.<name>.merge is no longer ignored if the remote is configured
with a branches/* file. Neither behavior is useful, because there can
only be one ref that gets fetched, but this is more consistant.
Also, fetch prints different information to standard out.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The transport specific stuff was moved into libgit.a, and the
bundle specific stuff will not be left behind.
This is a big code move, with one exception: the function
unbundle() no longer outputs the list of refs. You have to call
list_bundle_refs() yourself for that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This moves the code to call push backends into a library that can be
extended to make matching fetch and push decisions based on the URL it
gets, and which could be changed to have built-in implementations
instead of calling external programs.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This turns the extern functions to be provided by the backend into a
struct of pointers, renames the functions to be more
namespace-friendly, and updates http-fetch to this interface. It
removes the unused include from http-push.c. It makes git-http-fetch a
builtin (with the implementation a separate file, accessible
directly).
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Removes the commit-walkers that are no longer useful, as well as
library code that was only used by ssh-fetch/push.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cr/reset:
Simplify cache API
An additional test for "git-reset -- path"
Make "git reset" a builtin.
Move make_cache_entry() from merge-recursive.c into read-cache.c
Add tests for documented features of "git reset".
This replaces the script "git-reset.sh" with "builtin-reset.c".
A few git commands used in the script are called from the builtin also:
"ls-files" to check for unmerged files, "read-tree" for resetting
the index file in "mixed" and "hard" resets, and "update-index" to
refresh at the end in the "mixed" reset and also for the option that
gets selected paths into the index.
The reset option with paths was implemented by Johannes Schindelin.
Since the option that gets selected paths into the index is not
a "reset" like the others because it does not change the HEAD at all,
now the command is showing a warning when the "--mixed" option
is supplied for that purpose.
The following table shows the behaviour of "git reset" for
the different supported options, where X means "changing"
the HEAD, index or working tree:
reset: --soft --mixed --hard -- <paths>
HEAD X X X -
index - X X X
files - - X -
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rs/archive:
archive - leakfix for format_subst()
Define NO_MEMMEM on Darwin as it lacks the function
archive: rename attribute specfile to export-subst
archive: specfile syntax change: "$Format:%PLCHLDR$" instead of just "%PLCHLDR" (take 2)
add memmem()
Remove unused function convert_sha1_file()
archive: specfile support (--pretty=format: in archive files)
Export format_commit_message()
memmem() is a nice GNU extension for searching a length limited string
in another one.
This compat version is based on the version found in glibc 2.2 (GPL 2);
I only removed the optimization of checking the first char by hand, and
generally tried to keep the code simple. We can add it back if memcmp
shows up high in a profile, but for now I prefer to keep it (almost
trivially) simple.
Since I don't really know which platforms beside those with a glibc
have their own memmem(), I used a heuristic: if NO_STRCASESTR is set,
then NO_MEMMEM is set, too.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
this is still rough, hence it is disabled by default. You need to compile
with "make THREADED_DELTA_SEARCH=1 ..." at the moment.
Threading is done on different portions of the object list to be
deltified. This is currently done by spliting the list into n parts and
then a thread is spawned for each of them. A better method would consist
of spliting the list into more smaller parts and have the n threads
pick the next part available.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cr/tag:
Teach "git stripspace" the --strip-comments option
Make verify-tag a builtin.
builtin-tag.c: Fix two memory leaks and minor notation changes.
launch_editor(): Heed GIT_EDITOR and core.editor settings
Make git tag a builtin.
These patches use docbook2x in order to create an info version of the
git user manual. No existing Makefile targets (including "all") are
touched, so you need to explicitly say
make info
sudo make install-info
to get git.info created and installed. If the info target directory
does not already contain a "dir" file, no directory entry is created.
This facilitates $(DESTDIR)-based installations. The same could be
achieved with
sudo make INSTALL_INFO=: install-info
explicitly.
perl is used for patching up sub-par file and directory information in
the Texinfo file. It would be cleaner to place the respective info
straight into user-manual.txt or the conversion configurations, but I
find myself unable to find out how to do this with Asciidoc/Texinfo.
Signed-off-by: David Kastrup <dak@gnu.org>
This patch adds convenience functions to work with absolute paths.
The function is_absolute_path() should help the efforts to integrate
the MinGW fork.
Note that make_absolute_path() returns a pointer to a static buffer.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce new makefile variable lib to hold the name of the lib
directory ("lib" by default). Also introduce a switch for configure
to specify this name with --with-lib=ARG. This is useful for systems
that use a different name than "lib" (like "lib64" on some 64 bit
Linux architectures).
Signed-off-by: Robert Schiele <rschiele@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some systems do not provide zlib development headers and libraries in
default search path of the compiler. For these systems we should allow
specifying the location by --with-zlib=PATH or by setting ZLIB_PATH in
the makefile.
Signed-off-by: Robert Schiele <rschiele@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some people might prefer to be able to specify the find utility to
use.
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This replaces "git-verify-tag.sh" with "builtin-verify-tag.c".
Testing relies on the "git tag -v" tests calling this command.
A temporary file is needed when calling to gpg, because git is
already creating detached signatures (gpg option -b) to sign tags
(instead of leaving gpg to add the signature to the file by itself),
and those signatures need to be supplied in a separate file to be
verified by gpg.
The program uses git_mkstemp to create that temporary file needed by
gpg, instead of the previously used "$GIT_DIR/.tmp-vtag", in order to
allow the command to be used in read-only repositories, and also
prevent other instances of git to read or remove the same file.
Signal SIGPIPE is ignored because the program sometimes was
terminated because that signal when writing the input for gpg.
The command now can receive many tag names to be verified.
Documentation is also updated here to reflect this new behaviour.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This replaces the script "git-tag.sh" with "builtin-tag.c".
The existing test suite for "git tag" guarantees the compatibility
with the features provided by the script version.
There are some minor changes in the behaviour of "git tag" here:
"git tag -v" now can get more than one tag to verify, like "git tag -d" does,
"git tag" with no arguments prints all tags, more like "git branch" does,
and "git tag -n" also prints all tags with annotations (without needing -l).
Tests and documentation were also updated to reflect these changes.
The program is currently calling the script "git verify-tag" for verify.
This can be changed porting it to C and calling its functions directly
from builtin-tag.c.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 334d28ae factored out git.o as an intermediate stage between
git.c and git$X. However:
- It left some no-longer-relevant flags in the rule for git$X.
- It failed to replace git$X with git.o in the list of files that
record GIT_VERSION. This broke incorporation of a changed
GIT_VERSION into git$X because, when GIT_VERSION changes, git.o isn't
remade and git$X is relinked from the git.o that still contains the
old GIT_VERSION.
This patch removes the irrelevant flags and fixes incorporation of a
changed GIT_VERSION into git$X.
Signed-off-by: Matt McCutchen <hashproduct@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I realize that a lot of people use the "git-xyzzy" format, and we have
various historical reasons for it, but I also think that most people have
long since started thinking of the git command as a single command with
various subcommands, and we've long had the documentation talk about it
that way.
Slowly migrating away from the git-xyzzy format would allow us to
eventually no longer install hundreds of binaries (even if most of them
are symlinks or hardlinks) in users $PATH, and the _original_ reasons for
it (implementation issues and bash completion) are really long long gone.
Using "git xyzzy" also has some fundamental advantages, like the ability
to specify things like paging ("git -p xyzzy") and making the whole notion
of aliases act like other git commands (which they already do, but they do
*not* have a "git-xyzzy" form!)
Anyway, while actually removing the "git-xyzzy" things is not practical
right now, we can certainly start slowly to deprecate it internally inside
git itself - in the shell scripts we use, and the test vectors.
This patch adds a "remove-dashes" makefile target, which does that. It
isn't particularly efficient or smart, but it *does* successfully rewrite
a lot of our shell scripts to use the "git xyzzy" form for all built-in
commands.
(For non-builtins, the "git xyzzy" format implies an extra execve(), so
this script leaves those alone).
So apply this patch, and then run
make remove-dashes
make test
git commit -a
to generate a much larger patch that actually starts this transformation.
(The only half-way subtle thing about this is that it also fixes up
git-filter-branch.sh for the new world order by adding quoting around
the use of "git-commit-tree" as an argument. It doesn't need it in that
format, but when changed into "git commit-tree" it is no longer a single
word, and the quoting maintains the old behaviour).
NOTE! This does not yet mean that you can actually stop installing the
"git-xyzzy" binaries for the builtins. There are some remaining places
that want to use the old form, this just removes the most obvious ones
that can easily be done automatically.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ns/stash:
Documentation: quote {non-attributes} for asciidoc
git-stash: don't complain when listing in a repo with no stash
git-stash: fix "can't shift that many" with no arguments
git-stash: fix "no arguments" case in documentation
git-stash: require "save" to be explicit and update documentation
Document git-stash
Add git-stash script
* js/rebase:
Teach rebase -i about --preserve-merges
rebase -i: provide reasonable reflog for the rebased branch
rebase -i: several cleanups
ignore git-rebase--interactive
Teach rebase an interactive mode
Move the pick_author code to git-sh-setup
When my boss has something to show me and I have to update, for some
reason I am always in the middle of doing something else, and git pull
command refuses to work in such a case.
I wrote this little script to save the changes I made, perform the
update, and then come back to where I was, but on top of the updated
commit.
This is how you would use the script:
$ git stash
$ git pull
$ git stash apply
[jc: with a few fixlets from the list]
Signed-off-by: Nanako Shiraishi <nanako3@bluebottle.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't you just hate the fact sometimes, that git-rebase just applies
the patches, without any possibility to edit them, or rearrange them?
With "--interactive", git-rebase now lets you edit the list of patches,
so that you can reorder, edit and delete patches.
Such a list will typically look like this:
pick deadbee The oneline of this commit
pick fa1afe1 The oneline of the next commit
...
By replacing the command "pick" with the command "edit", you can amend
that patch and/or its commit message, and by replacing it with "squash"
you can tell rebase to fold that patch into the patch before that.
It is derived from the script sent to the list in
<Pine.LNX.4.63.0702252156190.22628@wbgn013.biozentrum.uni-wuerzburg.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/filter:
filter-branch: subdirectory filter needs --full-history
filter-branch: Simplify parent computation.
Teach filter-branch about subdirectory filtering
filter-branch: also don't fail in map() if a commit cannot be mapped
filter-branch: Use rev-list arguments to specify revision ranges.
filter-branch: fix behaviour of '-k'
filter-branch: use $(($i+1)) instead of $((i+1))
chmod +x git-filter-branch.sh
filter-branch: prevent filters from reading from stdin
t7003: make test repeatable
Add git-filter-branch
It turns out that the attribute definition we have had for a
long time to hide "^" character from AsciiDoc 7 was not honored
by AsciiDoc 8 even under "-a asciidoc7compatible" mode. There is
a similar breakage with the "compatible" mode with + characters.
The double colon at the end of definition list term needs
to be attached to the term, without a whitespace. After this
minimum fixups, AsciiDoc 8 (I used 8.2.1 on Debian) with
compatibility mode seems to produce reasonably good results.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function converts the value of h_errno (last error of name
resolver library, see netdb.h).
One of systems which supposedly do not have the function is SunOS.
POSIX does not mandate its presence.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All the other directory location variables do not have the trailing
slash.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent git-gui has the ability to determine the location of its library
files relative to the --exec-dir. Its Makefile enables this capability
depending on the install paths that are specified. However, without this
fix there is an extra slash in a path specification, so that the Makefile
does not recognize the equivalence of two paths that it compares.
A side-effect is that all "standard" builds (which do not set $(sharedir)
explicitly) now exploit above mentioned gut-gui feature.
Another side-effect is that an ugly compiled-in double-slash in
$(template_dir) is avoided.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the kernel we have a rule for *.c -> *.s files exactly because
it's nice to be able to easily say "ok, what does that generate".
Here's a patch to add such a rule to git too, in case anybody is
interested. It makes it much simpler to just do
make sha1_file.s
and look at the compiler-generated output that way, rather than having to
fire up gdb on the resulting binary.
(Add -fverbose-asm or something if you want to, it can make the result
even more readable)
[jc: add *.s to .gitignore]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This script is derived from Pasky's cg-admin-rewritehist.
In fact, it _is_ the same script, minimally adapted to work without cogito.
It _should_ be able to perform the same tasks, even if only relying on
core-git programs.
All the work is Pasky's, just the adaption is mine.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Hopefully-signed-off-by: Petr "cogito master" Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Use a generic make rule to build all the test programs, rather than
specifically mentioning each one.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* db/remote:
Move refspec pattern matching to match_refs().
Update local tracking refs when pushing
Add handlers for fetch-side configuration of remotes.
Move refspec parser from connect.c and cache.h to remote.{c,h}
Move remote parsing into a library file out of builtin-push.
Those are builtins. Remove them from PROGRAMS variable
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This command can be used to initialize, update and inspect submodules. It
uses a .gitmodules file, readable by git-config, in the top level directory
of the 'superproject' to specify a mapping between submodule paths and
repository url.
Example .gitmodules layout:
[module "git"]
url = git://git.kernel.org/pub/scm/git/git.git
With this entry in .gitmodules (and a commit reference in the index entry for
the path "git"), the command 'git submodule init' will clone the repository
at kernel.org into the directory "git".
Known issues
============
There is currently no way to override the url found in the .gitmodules file,
except by manually creating the subproject repository. The place to fix this
in the script has a rather long comment about a possible plan.
Funny paths will be quoted in the output from git-ls-files, but git-submodule
does not attempt to unquote (or even detect the presence of) such paths.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I believe noone uses git-applymbox, and noone definitely should, since it
is supposed to be completely superseded and everything by its younger
cousin git-am. The only known person in the universe to use it was Linus
and he declared some time ago that he will try to use git-am instead in his
famous dotest script.
The trouble is that git-applymbox existence creates confusing UI. I'm a bit
like a recycled newbie to the git porcelain and *I* was confused by
git-applymbox primitiveness until I've realized a while later that I'm of
course using the wrong command.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The new parser is different from the one in builtin-push in two ways:
the default is to use the current branch's remote, if there is one,
before "origin"; and config is used in preference to remotes.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
HPA noticed that git-rebase fails when changes involve symlinks
in the middle of the hierarchy. Consider:
* The tree state before the patch is applied has arch/x86_64/boot
as a symlink pointing at ../i386/boot/
* The patch tries to remove arch/x86_64/boot symlink, and
create bunch of files there: .gitignore, Makefile, etc.
git-apply tries to be careful while applying patches; it never
touches the working tree until it is convinced that the patch
would apply cleanly. One of the check it does is that when it
knows a path is going to be created by the patch, it runs
lstat() on the path to make sure it does not exist.
This leads to a false alarm. Because we do not touch the
working tree before all the check passes, when we try to make
sure that arch/x86_64/boot/.gitignore does not exist yet, we
haven't removed the arch/x86_64/boot symlink. The lstat() check
ends up seeing arch/i386/boot/.gitignore through the
yet-to-be-removed symlink, and says "Hey, you already have a
file there, but what you fed me is a patch to create a new
file. I am not going to clobber what you have in the working
tree."
We have similar checks to see a file we are going to modify does
exist and match the preimage of the diff, which is done by
directly opening and reading the file.
For a file we are going to delete, we make sure that it does
exist and matches what is going to be removed (a removal patch
records the full preimage, so we check what you have in your
working tree matches it in full -- otherwise we would risk
losing your local changes), which again is done by directly
opening and reading the file.
These checks need to be adjusted so that they are not fooled by
symlinks in the middle.
- To make sure something does not exist, first lstat(). If it
does not exist, it does not, so be happy. If it _does_, we
might be getting fooled by a symlink in the middle, so break
leading paths and see if there are symlinks involved. When
we are checking for a path a/b/c/d, if any of a, a/b, a/b/c
is a symlink, then a/b/c/d does _NOT_ exist, for the purpose
of our test.
This would fix this particular case you saw, and would not
add extra overhead in the usual case.
- To make sure something already exists, first lstat(). If it
does not exist, barf (up to this, we already do). Even if it
does seem to exist, we might be getting fooled by a symlink
in the middle, so make sure leading paths are not symlinks.
This would make the normal codepath much more expensive for
deep trees, which is a bit worrisome.
This patch implements the first side of the check "making sure
it does not exist". The latter "making sure it exists" check is
not done yet, so applying the patch in reverse would still
fail, but we have to start from somewhere.
Signed-off-by: Junio C Hamano <junkio@cox.net>
We already export these variables earlier in the Makefile, right
after they were 'declared'. There is no point in doing so again.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* 'master' of git://repo.or.cz/git-gui:
git-gui: Use vi-like keys in merge dialog
git-gui: Include commit id/subject in merge choices
git-gui: Show all possible branches for merge
git-gui: Move merge support into a namespace
git-gui: Allow vi keys to scroll the diff/blame regions
git-gui: Move console procs into their own namespace
git-gui: Refactor into multiple files to save my sanity
git-gui: Track our own embedded values and rebuild when they change
git-gui: Refactor to use our git proc more often
git-gui: Use option database defaults to set the font
git-gui: Cleanup common font handling for font_ui
git-gui: Correct line wrapping for too many branch message
git-gui: Warn users before making an octopus merge
git-gui: Include the subject in the status bar after commit
Also perform an evil merge change to update Git's main Makefile to
pass the proper options down into git-gui now that it depends on
reasonable values for 'sharedir' and 'TCL_PATH'.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I'm finding it difficult to work with a 6,000+ line Tcl script
and not go insane while looking for a particular block of code.
Since most of the program is organized into different units of
functionality and not all users will need all units immediately
on startup we can improve things by splitting procs out into
multiple files and let auto_load handle things for us.
This should help not only to better organize the source, but
it may also improve startup times for some users as the Tcl
parser does not need to read as much script before it can show
the UI. In many cases the user can avoid reading at least half
of git-gui now.
Unfortunately we now need a library directory in our runtime
location. This is currently assumed to be $(sharedir)/git-gui/lib
and its expected that the Makefile invoker will setup some sort of
reasonable sharedir value for us, or let us assume its going to be
$(gitexecdir)/../share.
We now also require a tclsh (in TCL_PATH) to just run the Makefile,
as we use tclsh to generate the tclIndex for our lib directory. I'm
hoping this is not an unncessary burden on end-users who are building
from source.
I haven't really made any functionality changes here, this is just a
huge migration of code from one file to many smaller files. All of
the new changes are to setup the library path and install the library
files.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Include a generalized fixup_pack_header_footer() in this new file.
Needed by git-repack --max-pack-size feature in a later patchset.
[sp: Moved close(pack_fd) to callers, to support index-pack, and
changed name to better indicate it is for packfiles.]
Signed-off-by: Dana L. How <danahow@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Like core-Git we now track the values that we embed into our shell
script wrapper, and we "recompile" that wrapper if they are changed.
This concept was lifted from git.git's Makefile, where a similar
thing was done by Eygene Ryabinkin. Too bad it wasn't just done
here in git-gui from the beginning, as the git.git Makefile support
for GIT-GUI-VARS was really just because git-gui doesn't do it on
its own.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This splits out a few functions to deal with mailmap from
shortlog and makes it a bit more usable from other programs.
Most notably, it does not clobber input e-mail address anymore.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Remove usernames from all commit messages, not just when using svmprops
applymbox & quiltimport: typofix.
Create a sysconfdir variable, and use it for ETC_GITCONFIG
ETC_GITCONFIG defaults to $(prefix)/etc/gitconfig, so if you just set
prefix=/usr, you end up with a git that looks in /usr/etc/gitconfig, rather
than /etc/gitconfig as specified by the FHS. Furthermore, setting
ETC_GITCONFIG does not fix the paths to any future system-wide configuration
files.
Factor out the path to the system-wide configuration directory into a variable
sysconfdir, normally set to $(prefix)/etc, but set to /etc when prefix=/usr .
This fixes the prefix=/usr problem for ETC_GITCONFIG, and allows centralized
configuration of any future system-wide configuration files without requiring
further action from package maintainers or other people building and
installing git.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Instead of having this code duplicated in multiple places, let's have
a common interface for progress display. If someday someone wishes to
display a cheezy progress bar instead then only one file will have to
be changed.
Note: I left merge-recursive.c out since it has a strange notion of
progress as it apparently increase the expected total number as it goes.
Someone with more intimate knowledge of what that is supposed to mean
might look at converting it to the common progress interface.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* 'jc/attr': (28 commits)
lockfile: record the primary process.
convert.c: restructure the attribute checking part.
Fix bogus linked-list management for user defined merge drivers.
Simplify calling of CR/LF conversion routines
Document gitattributes(5)
Update 'crlf' attribute semantics.
Documentation: support manual section (5) - file formats.
Simplify code to find recursive merge driver.
Counto-fix in merge-recursive
Fix funny types used in attribute value representation
Allow low-level driver to specify different behaviour during internal merge.
Custom low-level merge driver: change the configuration scheme.
Allow the default low-level merge driver to be configured.
Custom low-level merge driver support.
Add a demonstration/test of customized merge.
Allow specifying specialized merge-backend per path.
merge-recursive: separate out xdl_merge() interface.
Allow more than true/false to attributes.
Document git-check-attr
Change attribute negation marker from '!' to '-'.
...
* np/pack: (27 commits)
document --index-version for index-pack and pack-objects
pack-objects: remove obsolete comments
pack-objects: better check_object() performances
add get_size_from_delta()
pack-objects: make in_pack_header_size a variable of its own
pack-objects: get rid of create_final_object_list()
pack-objects: get rid of reuse_cached_pack
pack-objects: clean up list sorting
pack-objects: rework check_delta_limit usage
pack-objects: equal objects in size should delta against newer objects
pack-objects: optimize preferred base handling a bit
clean up add_object_entry()
tests for various pack index features
use test-genrandom in tests instead of /dev/urandom
simple random data generator for tests
validate reused pack data with CRC when possible
allow forcing index v2 and 64-bit offset treshold
pack-redundant.c: learn about index v2
show-index.c: learn about index v2
sha1_file.c: learn about index version 2
...
Mimick what we do for gitk. Since you do have a source file,
git-gui.sh, which is separate from the target, it should be much
easier in git-gui's Makefile.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This reverts commit e2a1bc67d3.
Junio rightly pointed out this patch doesn't handle the
`make install` target very well:
Junio C Hamano <junkio@cox.net> writes:
> You should never generate new files in the source tree from
> 'install' target. Otherwise, the usual pattern of "make" as
> yourself and then "make install" as root would not work from a
> "root-to-nobody-squashing" NFS mounted source tree to local
> filesystem. You should know better than accepting such a patch.
This allows you to add an arbitrary "decoration" of your choice to any
object. It's a space- and time-efficient way to add information to
arbitrary objects, especially if most objects probably do not have the
decoration.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I lost it by mistake while shuffling the gitattributes series which
originally was on top of the subproject topic onto the master branch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds the basic infrastructure to assign attributes to
paths, in a way similar to what the exclusion mechanism does
based on $GIT_DIR/info/exclude and .gitignore files.
An attribute is just a simple string that does not contain any
whitespace. They can be specified in $GIT_DIR/info/attributes
file, and .gitattributes file in each directory.
Each line in these files defines a pattern matching rule.
Similar to the exclusion mechanism, a later match overrides an
earlier match in the same file, and entries from .gitattributes
file in the same directory takes precedence over the ones from
parent directories. Lines in $GIT_DIR/info/attributes file are
used as the lowest precedence default rules.
A line is either a comment (an empty line, or a line that begins
with a '#'), or a rule, which is a whitespace separated list of
tokens. The first token on the line is a shell glob pattern.
The rest are names of attributes, each of which can optionally
be prefixed with '!'. Such a line means "if a path matches this
glob, this attribute is set (or unset -- if the attribute name
is prefixed with '!'). For glob matching, the same "if the
pattern does not have a slash in it, the basename of the path is
matched with fnmatch(3) against the pattern, otherwise, the path
is matched with the pattern with FNM_PATHNAME" rule as the
exclusion mechanism is used.
This does not define what an attribute means. Tying an
attribute to various effects it has on git operation for paths
that have it will be specified separately.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/cherry:
Documentation: --cherry-pick
git-log --cherry-pick A...B
Refactor patch-id filtering out of git-cherry and git-format-patch.
Add %m to '--pretty=format:'
By default we are pretty quiet about the actual commands that
we are running. So we should continue to be quiet about the new
merge-subtree hardlink to merge-recursive. Technically this is not
a builtin, but it is close because subtree is actually builtin to
a non-builtin. So lets just make things easy and call it a builtin.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This implements the patch-id computation and recording library,
patch-ids.c, and rewrites the get_patch_ids() function used in
cherry and format-patch to use it, so that they do not pollute
the object namespace. Earlier code threw non-objects into the
in-core object database, and hoped for not getting bitten by
SHA-1 collisions. While it may be practically Ok, it still was
an ugly hack.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Reliance on /dev/urandom produces test vectors that are, well, random.
This can cause problems impossible to track down when the data is
different from one test invokation to another.
The goal is not to have random data to test, but rather to have a
convenient way to create sets of large files with non compressible and
non deltifiable data in a reproducible way.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This merge strategy largely piggy-backs on git-merge-recursive.
When merging trees A and B, if B corresponds to a subtree of A,
B is first adjusted to match the tree structure of A, instead of
reading the trees at the same level. This adjustment is also
done to the common ancestor tree.
If you are pulling updates from git-gui repository into git.git
repository, the root level of the former corresponds to git-gui/
subdirectory of the latter. The tree object of git-gui's toplevel
is wrapped in a fake tree object, whose sole entry has name 'git-gui'
and records object name of the true tree, before being used by
the 3-way merge code.
If you are merging the other way, only the git-gui/ subtree of
git.git is extracted and merged into git-gui's toplevel.
The detection of corresponding subtree is done by comparing the
pathnames and types in the toplevel of the tree.
Heuristics galore! That's the git way ;-).
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Documentation: tighten dependency for git.{html,txt}
Makefile: iconv() on Darwin has the old interface
t5300-pack-object.sh: portability issue using /usr/bin/stat
t3200-branch.sh: small language nit
usermanual.txt: some capitalization nits
Make builtin-branch.c handle the git config file
rename_ref(): only print a warning when config-file update fails
Distinguish branches by more than case in tests.
Avoid composing too long "References" header.
cvsimport: Improve formating consistency
cvsimport: Reorder options in documentation for better understanding
cvsimport: Improve usage error reporting
cvsimport: Improve documentation of CVSROOT and CVS module determination
cvsimport: sync usage lines with existing options
Conflicts:
Documentation/Makefile
The libiconv on Darwin uses the old iconv() interface (2nd argument is a
const char **, instead of a char **). Add OLD_ICONV to the Darwin
variable definitions to handle this.
Signed-off-by: Arjen Laarhoven <arjen@yaph.org>
Acked-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Fix lseek(2) calls with args 2 and 3 swapped
Honor -p<n> when applying git diffs
Fix dependency of common-cmds.h
Fix renaming branch without config file
DESTDIR support for git/contrib/emacs
gitweb: Fix bug in "blobdiff" view for split (e.g. file to symlink) patches
Document --left-right option to rev-list.
Revert "builtin-archive: use RUN_SETUP"
rename contrib/hooks/post-receieve-email to contrib/hooks/post-receive-email.
rerere: make sorting really stable.
Fix t4200-rerere for white-space from "wc -l"
GNU make does not include environment variables by default
in its namespace. Just pass them in make command line.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Makefile got one external option:
- TCLTK_PATH: the path to the Tcl/Tk interpreter.
Users (or build wrappers) may set this variable to the
location of the wish executable.
Signed-off-by: Eygene Ryabinkin <rea-git@codelabs.ru>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
--with-tcltk=/path/to/wish sets the TCLTK_PATH variable that is
used to substitute the location of the wish interpreter in the
Tcl/Tk programs.
New tracking file, GIT-GUI-VARS, was introduced: it tracks the
location of the Tcl/Tk interpreter and activates the GUI tools
rebuild if the interpreter path was changed. The separate tracker
is better than the GIT-CFLAGS: there is no need to rebuild the whole
git if the interpreter path was changed.
Signed-off-by: Eygene Ryabinkin <rea-git@codelabs.ru>
--with-tcltk enables the search of the Tcl/Tk interpreter. If no
interpreter is found then Tcl/Tk dependend parts are disabled.
--without-tcltk unconditionally disables Tcl/Tk dependent parts.
The original behaviour is not changed: bare './configure' just
installs the Tcl/Tk part doing no checks for the interpreter.
Signed-off-by: Eygene Ryabinkin <rea-git@codelabs.ru>
Makefile knob named NO_TCLTK was introduced. It prevents the build
and installation of the Tcl/Tk dependent parts.
Signed-off-by: Eygene Ryabinkin <rea-git@codelabs.ru>
WITH_P4IMPORT: enables the installation of the Perforce import
script.
Signed-off-by: Eygene Ryabinkin <rea-git@codelabs.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
While running 'make test', the test-chmtime program is created, and should
be cleaned up on 'make clean'.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/fetch:
.gitignore: add git-fetch--tool
builtin-fetch--tool: fix reflog notes.
git-fetch: retire update-local-ref which is not used anymore.
builtin-fetch--tool: make sure not to overstep ls-remote-result buffer.
fetch--tool: fix uninitialized buffer when reading from stdin
builtin-fetch--tool: adjust to updated sha1_object_info().
git-fetch--tool takes flags before the subcommand.
Use stdin reflist passing in git-fetch.sh
Use stdin reflist passing in parse-remote
Allow fetch--tool to read from stdin
git-fetch: rewrite expand_ref_wildcard in C
git-fetch: rewrite another shell loop in C
git-fetch: move more code into C.
git-fetch--tool: start rewriting parts of git-fetch in C.
git-fetch: split fetch_main into fetch_dumb and fetch_native
The git-mergetool program can be used to automatically run an appropriate
merge resolution program to resolve merge conflicts. It will automatically
run one of kdiff3, tkdiff, meld, xxdiff, or emacs emerge programs.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Since git-gui 0.6.4 the credits file is no longer produced.
This file was removed from git-gui due to build issues that
a lot of users and Git developers have reported running into.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This reverts commit 871f4c97ad.
Too many users have complained about the credits generator in
git-gui, so I'm backing the entire thing out. This revert will
finish that series.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
- print output file name for .c files
- suppress output of the names of subdirectories when make changes into them
- use GEN prefix for makefile generation in perl/
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Per Junio's suggestion we are setting 'make' to be quiet by default,
with `make V=1` available to force GNU make back to its default
behavior of showing each command it is running.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I find it difficult to see compiler warnings amongst the massive
spewing produced by GNU make as it works through our productions.
This is especially true if CFLAGS winds up being rather long, due
to a large number of -W options being enabled and due to a number
of -D options being configured/required by my platform.
By defining QUIET_MAKE (e.g. make QUIET_MAKE=YesPlease) during
compilation users will get a less verbose output, such as:
...
CC builtin-grep.c
builtin-grep.c:187: warning: 'external_grep' defined but not used
CC builtin-init-db.c
CC builtin-log.c
CC builtin-ls-files.c
CC builtin-ls-tree.c
...
The verbose (normal make) output is still the default.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
To fit nicely into the output of the git.git project's own quieter
Makefile, we want to make the git-gui Makefile nice and quiet too.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint:
Unset NO_C99_FORMAT on Cygwin.
Fix a "pointer type missmatch" warning.
Fix some "comparison is always true/false" warnings.
Fix an "implicit function definition" warning.
Fix a "label defined but unreferenced" warning.
Document the config variable format.suffix
git-merge: fail correctly when we cannot fast forward.
builtin-archive: use RUN_SETUP
Fix git-gc usage note
This should only be set based on the capability of your
compiler/library to support c99 format specifiers. In this
case the version of gcc/newlib and indirectly the version
of Cygwin. It should probably only be set in your config.mak
file.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In particular, the second parameter in the call to iconv() will
cause this warning if your library declares iconv() with the
second (input buffer pointer) parameter of type const char **.
This is the old prototype, which is none-the-less used by the
current version of newlib on Cygwin. (It appears in old versions
of glibc too).
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Another memory overrun in http-push.c
fetch.o depends on the headers, too.
Documentation: Correct minor typo in git-add documentation.
Documentation/git-send-email.txt: Fix labeled list formatting
Documentation/git-quiltimport.txt: Fix labeled list formatting
Documentation/build-docdep.perl: Fix dependencies for included asciidoc files
* np/types: (253 commits)
get rid of lookup_object_type()
convert object type handling from a string to a number
formalize typename(), and add its reverse type_from_string()
sha1_file.c: don't ignore an error condition in sha1_loose_object_info()
sha1_file.c: cleanup "offset" usage
sha1_file.c: cleanup hdr usage
git-apply: do not fix whitespaces on context lines.
diff --cc: integer overflow given a 2GB-or-larger file
mailinfo: do not get confused with logical lines that are too long.
Documentation: link in 1.5.0.2 material to the top documentation page.
Documentation: document remote.<name>.tagopt
GIT 1.5.0.2
git-remote: support remotes with a dot in the name
Documentation: describe "-f/-t/-m" options to "git-remote add"
diff --cc: fix display of symlink conflicts during a merge.
merge-recursive: fix longstanding bug in merging symlinks
merge-index: fix longstanding bug in merging symlinks
diff --cached: give more sensible error message when HEAD is yet to be created.
Update tests to use test-chmtime
Add test-chmtime: a utility to change mtime on files
...
This is intended to be a portable replacement for our usage
of date(1), touch(1), and Perl one-liners in tests.
Usage: test-chtime (+|=|-|=+|=-)<seconds> <file>..."
'+' increments the mtime on the files by <seconds>
'-' decrements the mtime on the files by <seconds>
'=' sets the mtime on the file to exactly <seconds>
'=+' and '=-' sets the mtime on the file to <seconds> after or
before the current time.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some workflows require use of repositories on machines that cannot be
connected, preventing use of git-fetch / git-push to transport objects and
references between the repositories.
git-bundle provides an alternate transport mechanism, effectively allowing
git-fetch and git-pull to operate using sneakernet transport. `git-bundle
create` allows the user to create a bundle containing one or more branches
or tags, but with specified basis assumed to exist on the target
repository. At the receiving end, git-bundle acts like git-fetch-pack,
allowing the user to invoke git-fetch or git-pull using the bundle file as
the URL. git-fetch and git-ls-remote determine they have a bundle URL by
checking that the URL points to a file, but are otherwise unchanged in
operation with bundles.
The original patch was done by Mark Levedahl <mdl123@verizon.net>.
It was updated to make git-bundle a builtin, and get rid of the tar
format: now, the first line is supposed to say "# v2 git bundle", the next
lines either contain a prerequisite ("-" followed by the hash of the
needed commit), or a ref (the hash of a commit, followed by the name of
the ref), and finally the pack. As a result, the bundle argument can be
"-" now.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* lt/crlf:
Teach core.autocrlf to 'git apply'
t0020: add test for auto-crlf
Make AutoCRLF ternary variable.
Lazy man's auto-CRLF
* jc/apply-config:
t4119: test autocomputing -p<n> for traditional diff input.
git-apply: guess correct -p<n> value for non-git patches.
git-apply: notice "diff --git" patch again
Fix botched "leak fix"
t4119: add test for traditional patch and different p_value
apply: fix memory leak in prefix_one()
git-apply: require -p<n> when working in a subdirectory.
git-apply: do not lose cwd when run from a subdirectory.
Teach 'git apply' to look at $HOME/.gitconfig even outside of a repository
Teach 'git apply' to look at $GIT_DIR/config
* maint:
git-diff: fix combined diff
Fix 'git commit -a' in a newly initialized repository
Include git-gui credits file in dist.
Document the new core.bare configuration option.
The Makefile for the git-gui subproject will fail to execute if run
outside of a git.git directory, such as when building from a .tar.gz
or .tar.bz2. This is because it is looking for the credits file,
which was created but omitted from the tarball by the toplevel
Makefile.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now that git-gui has been released to the public as part of Git 1.5.0
I am starting to see some work from other people beyond myself and
Paul. Consequently the copyright for git-gui is not strictly the
two of us anymore, and these others deserve to have some credit
given to them.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The settings in /etc/gitconfig can be overridden in ~/.gitconfig,
which in turn can be overridden in .git/config.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Solaris 8 was pre-c99, and they weren't willing to commit to
the strtoumax definition according to /usr/include/inttypes.h.
This adds NO_STRTOUMAX and NO_STRTOULL for ancient systems.
If NO_STRTOUMAX is defined, the routine in compat/strtoumax.c
will be used instead. That routine passes its arguments to
strtoull unless NO_STRTOULL is defined. If NO_STRTOULL, then
the routine uses strtoul (unsigned long).
Signed-off-by: Jason Riedy <ejr@cs.berkeley.edu>
Acked-by: Shawn O Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It currently does NOT know about file attributes, so it does its
conversion purely based on content. Maybe that is more in the "git
philosophy" anyway, since content is king, but I think we should try to do
the file attributes to turn it off on demand.
Anyway, BY DEFAULT it is off regardless, because it requires a
[core]
AutoCRLF = true
in your config file to be enabled. We could make that the default for
Windows, of course, the same way we do some other things (filemode etc).
But you can actually enable it on UNIX, and it will cause:
- "git update-index" will write blobs without CRLF
- "git diff" will diff working tree files without CRLF
- "git checkout" will write files to the working tree _with_ CRLF
and things work fine.
Funnily, it actually shows an odd file in git itself:
git clone -n git test-crlf
cd test-crlf
git config core.autocrlf true
git checkout
git diff
shows a diff for "Documentation/docbook-xsl.css". Why? Because we have
actually checked in that file *with* CRLF! So when "core.autocrlf" is
true, we'll always generate a *different* hash for it in the index,
because the index hash will be for the content _without_ CRLF.
Is this complete? I dunno. It seems to work for me. It doesn't use the
filename at all right now, and that's probably a deficiency (we could
certainly make the "is_binary()" heuristics also take standard filename
heuristics into account).
I don't pass in the filename at all for the "index_fd()" case
(git-update-index), so that would need to be passed around, but this
actually works fine.
NOTE NOTE NOTE! The "is_binary()" heuristics are totally made-up by yours
truly. I will not guarantee that they work at all reasonable. Caveat
emptor. But it _is_ simple, and it _is_ safe, since it's all off by
default.
The patch is pretty simple - the biggest part is the new "convert.c" file,
but even that is really just basic stuff that anybody can write in
"Teaching C 101" as a final project for their first class in programming.
Not to say that it's bug-free, of course - but at least we're not talking
about rocket surgery here.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Makefile: update check-docs target
cmd-list: add git-remote
Documentation: Drop full-stop from git-fast-import title.
Minor corrections to release notes
