Since git-remote always uses remote tracking branches, it
should be safe to always force updates of those branches.
I.e., we should generate
fetch = +refs/heads/*:refs/remotes/$remote/*
instead of
fetch = refs/heads/*:refs/remotes/$remote/*
This was the behavior of the perl version, which seems to
have been lost in the C rewrite.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, a push like:
git push remote src:dst
would go through the following steps:
1. check for an unambiguous 'dst' on the remote; if it
exists, then push to that ref
2. otherwise, check if 'dst' begins with 'refs/'; if it
does, create a new ref
3. otherwise, complain because we don't know where in the
refs hierarchy to put 'dst'
However, in some cases, we can guess about the ref type of
'dst' based on the ref type of 'src'. Specifically, before
complaining we now check:
2.5. if 'src' resolves to a ref starting with refs/heads
or refs/tags, then prepend that to 'dst'
So now this creates a new branch on the remote, whereas it
previously failed with an error message:
git push master:newbranch
Note that, by design, we limit this DWIM behavior only to
source refs which resolve exactly (including symrefs which
resolve to existing refs). We still complain on a partial
destination refspec if the source is a raw sha1, or a ref
expression such as 'master~10'.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test tried to push into a remote with ambiguous refs in
remotes/$x/master and remotes/$y/master. However, the remote
never actually tells us about the refs/remotes hierarchy, so
we don't even see this ambiguity.
The test happened to pass because we were simply looking for
failure, and the test fails for another reason: the dst
refspec does not exist and does not begin with refs/, making
it invalid.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tomasz Fortuna reported that "git commit" does not error out properly when
it cannot write tree objects out. "git write-tree" shares the same issue,
as the failure to notice the error is deep in the logic to write tree
objects out recursively.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Amend git-push refspec documentation
git-gc --prune is deprecated
svn-git: Use binmode for reading/writing binary rev maps
diff options documentation: refer to --diff-filter in --name-status
Don't force imap.host to be set when imap.tunnel is set
git-clone.txt: Adjust note to --shared for new pruning behavior of git-gc
git-svn bug with blank commits and author file
archive.c: format_subst - fixed bogus argument to memchr
copy.c: copy_fd - correctly report write errors
gitattributes: Fix subdirectory attributes specified from root directory
This patch adds a remote.*.mirror configuration option that,
when set, automatically puts git-push in --mirror mode for that
remote.
Furthermore, the option is set automatically by `git remote
add --mirror'.
The code in remote.c to parse remote.*.skipdefaultupdate
had a subtle problem: a comment in the code indicated that
special care was needed for boolean options, but this care was
not used in parsing the option. Since I was touching related
code, I did this fix too.
[jc: and I further fixed up the "ignore boolean" code.]
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
gitweb: Fix 'history' view for deleted files with history
Document that WebDAV doesn't need git on the server, and works over SSL
git-remote: reject adding remotes with invalid names
am: POSIX portability fix
When asked for history of a file which is not present in given branch
("HEAD", i.e. current branch, or given by transient $hash_hase ('hb')
parameter), but is present deeper in the history (meaning that "git
rev-list --full-history $hash_base -- $file_name" is not empty), and
there is no $hash ('h') parameter set for a file, gitweb would spew
multiple of "Use of uninitialized value" warnings, and some links
would be missing. This commit fixes this bug.
This bug occurs in the rare cases when "git log -- <path>" is empty
and "git log --full-history -- <path>" is not, or to be more exact in
the cases when full-history starts later than given branch. It can
happen if you are using handcrafted gitwb URL, or if you follow
generic 'history' link or bookmark for a file which got deleted.
Gitweb tried to get file type ('tree', or 'blob', or even 'commit')
from the commit we start searching from (where the file was not
present), and not among found commits. This was the cause of "Use of
uninitialized value" warnings.
This commit also add tests for such situation to t9500 test.
While we are it, return HTTP error if there is _no_ history; it means
that file or directory was not found (for given branch). Also error
out if type of item could not be found: it should not happen now, but
better be sure.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This can happen if the arguments to git-remote add is switched by the
user, and git would only show an error if fetching was also requested.
Fix it by using the refspec parsing engine to check if the requested
name can be parsed as a remote before add it.
Also cleanup so that the "remote.<name>.url" config name buffer is only
initialized once.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git init --shared=0xxx, where '0xxx' is an octal number, will create
a repository with file modes set to '0xxx'. Users with a safe umask
value (0077) can use this option to force file modes. For example,
'0640' is a group-readable but not group-writable regardless of
user's umask value. Values compatible with old Git versions are written
as they were before, for compatibility reasons. That is, "1" for
"group" and "2" for "everybody".
"git config core.sharedRepository 0xxx" is also handled.
Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditionally git-rebase was implemented in terms of "format-patch" piped
to "am -3", to strike balance between speed (because it avoids a rather
expensive read-tree/merge-recursive machinery most of the time) and
flexibility (the magic "-3" allows it to fall back to 3-way merge as
necessary). However, this combination has one flaw when dealing with a
nonstandard commit log message format that has more than one lines in the
first paragraph.
This teaches "git am --rebasing" to take advantage of the fact that the
mbox message "git rebase" prepares for it records the original commit
object name, to get the log message from the original commit object
instead.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-bisect: make "start", "good" and "skip" succeed or fail atomically
git-am: cope better with an empty Subject: line
Ignore leading empty lines while summarizing merges
bisect: squelch "fatal: ref HEAD not a symref" misleading message
builtin-apply: Show a more descriptive error on failure when opening a patch
Clarify documentation of git-cvsserver, particularly in relation to git-shell
* maint-1.5.4:
git-bisect: make "start", "good" and "skip" succeed or fail atomically
git-am: cope better with an empty Subject: line
Ignore leading empty lines while summarizing merges
bisect: squelch "fatal: ref HEAD not a symref" misleading message
builtin-apply: Show a more descriptive error on failure when opening a patch
Clarify documentation of git-cvsserver, particularly in relation to git-shell
Before this patch, when "git bisect start", "git bisect good" or
"git bisect skip" were called with many revisions, they could fail
after having already marked some revisions as "good", "bad" or
"skip".
This could be especilally bad for "git bisect start" because as
the file ".git/BISECT_NAMES" would not have been written, there
would have been no attempt to clear the marked revisions on a
"git bisect reset". That's because if there is no
".git/BISECT_NAMES" file, nothing is done to clean things up, as
the bisect session is not supposed to have started.
While at it, let's also create the ".git/BISECT_START" file, only
after ".git/BISECT_NAMES" as been created.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git clean: Add test to verify directories aren't removed with a prefix
git clean: Don't automatically remove directories when run within subdirectory
git-submodule - possibly use branch name to describe a module
The earlier one botched the return value logic between config_bool and
config_bool_and_int. The former should normalize between 0 and 1 while
the latter should give back full range of integer values.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --for-status option is mainly used by builtin-status/commit.
It adds 'Modified submodules:' line at top and '# ' prefix to all
following lines.
Signed-off-by: Ping Yin <pkufranky@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These are the command line option equivalents of the 'merge.log' config
variable.
The patch also updates documentation and bash completion accordingly, and
adds a test.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These are new synonyms to the '--(no-)summary' option and the
'merge.summary' config variable, but are consistent with the soon to be
added 'merge --(no-)log' options. The 'merge.summary' config variable and
'--(no-)summary' options are still accepted, but are advertised to be
removed in the future.
'merge.log' takes precedence over 'merge.summary' if they are both set
inconsistently.
Update documentation and tests accordingly.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option has the same effect as '--(no-)summary' (i.e. whether to
show a diffsat at the end of the merge or not), and it is consistent
with the '--stat' option of other git commands.
Documentation, tests, and bash completion are updaed accordingly, and the
old --summary option is marked as being deprected.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The script had an unconditional output done outside of test_expect_*
construct, which leaked out and contaminated the output without -v.
Squelch it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also tighten test to require it to be correct.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
bisect: fix bad rev checking in "git bisect good"
revision.c: make --date-order overriddable
git-submodule: Avoid 'fatal: cannot describe' message
Force the medium pretty format on calls to git log
Fix section about backdating tags in the git-tag docs
Document option --only of git commit
Documentation/git-request-pull: Fixed a typo ("send" -> "end")
* maint-1.5.4:
bisect: fix bad rev checking in "git bisect good"
revision.c: make --date-order overriddable
Fix section about backdating tags in the git-tag docs
Document option --only of git commit
Documentation/git-request-pull: Fixed a typo ("send" -> "end")
It seems that "git bisect good" and "git bisect skip" have never
properly checked arguments that have been passed to them. As soon
as one of them can be parsed as a SHA1, no error or warning would
be given.
This is because 'git rev-parse --revs-only --no-flags "$@"' always
"exit 0" and outputs all the SHA1 it can found from parsing "$@".
This patch fix this by using, for each "bisect good" argument, the
same logic as for the "bisect bad" argument.
While at it, this patch teaches "bisect bad" to give a meaningfull
error message when it is passed more than one argument.
Note that if "git bisect good" or "git bisect skip" is given some
proper revs and then something that is not a proper rev, then the
first proper revs will still have been marked as "good" or "skip".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-fetch: fix status output when not storing tracking ref
core-tutorial.txt: Fix showing the current behaviour.
git-archive: ignore prefix when checking file attribute
Fix documentation syntax of optional arguments in short options.
* maint-1.5.4:
core-tutorial.txt: Fix showing the current behaviour.
git-archive: ignore prefix when checking file attribute
Fix documentation syntax of optional arguments in short options.
Ulrik Sverdrup noticed that git-archive doesn't correctly apply the attribute
export-subst when the option --prefix is given, too.
When it checked if a file has the attribute turned on, git-archive would try
to look up the full path -- including the prefix -- in .gitattributes. That's
wrong, as the prefix doesn't need to have any relation to any existing
directories, tracked or not.
This patch makes git-archive ignore the prefix when looking up if value of the
attribute export-subst for a file.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch allows .git to be a regular textfile containing the path of
the real git directory (prefixed with "gitdir: "), which can be useful on
platforms lacking support for real symlinks.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mk/unpack-careful:
t5300: add test for "index-pack --strict"
receive-pack: allow using --strict mode for unpacking objects
unpack-objects: fix --strict handling
t5300: add test for "unpack-objects --strict"
unpack-objects: prevent writing of inconsistent objects
When using git-svn to follow only a single (empty) path per
svn-remote (i.e. not using --stdlayout), following the history
of a renamed path was broken in
c586879cdf.
This reverts the regression for the single (emtpy) path per
svn-remote case.
To avoid breaking the tests in a committed revision, this is an
addendum to a patch originally submitted by
Santhosh Kumar Mani <santhoshmani@gmail.com>:
> git-svn: add test for renamed directory fetch
>
> This test tries to fetch a directory which had renames in the
> history from a SVN repository.
[ew: unneccesary dependency on the starting an HTTP server
removed from Santhosh's original test.]
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit 15387e3 (Test suite: reset TERM to its previous value after
testing., 2007-10-26), I added a workaround to reset TERM to its previous
value before the "test_done" at the end of "t7005-editor.sh" because
otherwise "test_done" would have printed the test result with a bad TERM
env variable (this resulted in output with no color on konsole).
But since commit c2116a1 (test-lib: fix TERM to dumb for test
repeatability, 2008-03-06), colored output is printed in a subshell with
TERM reset to its original value so the earlier workaround is not needed
anymore.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier commit 4be6096 (apply --unidiff-zero: loosen sanity checks for
--unidiff=0 patches, 2006-09-17) made match_beginning and match_end
computed incorrectly. If a hunk inserts at the beginning, old position
recorded at the hunk is line 0, and if a hunk changes at the beginning, it
is line 1. The new test added to t4104 exposes that the old code did not
insist on matching at the beginning for a patch to add a line to an empty
file.
An even older 65aadb9 (apply: force matching at the beginning.,
2006-05-24) was equally wrong in that it tried to take hints from the
number of leading context lines, to decide if the hunk must match at the
beginning, but we can just look at the line number in the hunk to decide.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* dd/cvsserver:
cvsserver: Use the user part of the email in log and annotate results
cvsserver: Add test for update -p
cvsserver: Implement update -p (print to stdout)
cvsserver: Add a few tests for 'status' command
cvsserver: Do not include status output for subdirectories if -l is passed
cvsserver: Only print the file part of the filename in status header
cvsserver: Respond to the 'editors' and 'watchers' commands
This test was already careful enough to skip signed tag tests if gpg
is not available, but it must also skip all verify tests, even those
that are about non-signed tags, because they also invoke gpg.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the verify_tag() function to remove an unnecessary test, and add
additional check for angle brackets in the name and email field, and
spaces in the email field. The timestamp and timezone sections are made
more straight forward by using strspn().
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit d89c1df (filter-branch: don't use xargs -0, 2008-03-12) replaced a
'ls-files | xargs rm' pipeline by 'git clean'. 'git clean' however does
not recurse and remove directories by default.
Now, consider a tree-filter that renames a directory.
1. For the first commit everything works as expected
2. Then filter-branch checks out the files for the next commit. This
leaves the new directory behind because there is no real "branch
switching" involved that would notice that the directory can be
removed.
3. Then filter-branch invokes 'git clean' to remove exactly those
left-overs. But here it does not remove the directory.
4. The next tree-filter does not work as expected because there already
exists a directory with the new name.
Just add -d to 'git clean', so that empty directories are removed.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test currently fails.
If b is a directory then 'mv a b' is not a plain "rename", but really a
"move", so we must also test that the directory does not exist with the
old name in the directory with the new name.
There's also some cleanup in the corresponding "rename file" test to avoid
spurious shell syntax errors and "ambigous ref" error from 'git show' (but
these should show up only if the test would fail anyway). Plus we also
test for the non-existence of the old file.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Add support for creating a new tag object and retaining the tag message,
author, and date when rewriting tags. The gpg signature, if one exists,
will be stripped.
This adds nearly proper tag name filtering to filter-branch. Proper tag
name filtering would include the ability to change the tagger, tag date,
tag message, and _not_ strip a gpg signature if the tag did not change.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since nearly its birth, git's tags have included a "tagger" field which
describes the name of tagger, email of tagger, and date and time of tagging.
But, this field was only loosely tested by git-mktag. Provide some thorough
testing for this field and also ensure that the tag header is separated
from the tag body by an empty line to reduce the convenience of creating
a flawed tag.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, if you changed a staged path into a directory in the work tree,
we happily ran lstat(2) on it and found that it exists, and declared that
the user changed it to a gitlink.
This is wrong for two reasons:
(1) It may be a directory, but it may not be a submodule, and in the
latter case, the change we need to report is "the blob at the path
has disappeared". We need to check with resolve_gitlink_ref() to be
consistent with what "git add" and "git update-index --add" does.
(2) lstat(2) may have succeeded only because a leading component of the
path was turned into a symbolic link that points at something that
exists in the work tree. In such a case, the path itself does not
exist anymore, as far as the index is concerned.
This fixes these breakages in diff-index that the previous patch has
exposed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff-index and diff-files can get confused in corner cases when an indexed
blob turns into something else in the work tree. This patch adds tests to
expose such breakages.
The test is classified under t2XXX series instead of t4XXX series, because
the ultimate objective is to fix "add -u" (and "commit -a" that shares the
same issue).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Finally, this resurrects the documented behaviour to protect other
objects listed on the command line from getting pruned.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It seems that git prune changed behaviour with respect to revisions added
from command line, probably when it became a builtin. Currently, it prints
a short usage and exits: instead, it should take those revisions into
account and not prune them. So add a couple of test to point this out.
We'll be fixing this by switching to parse_options(), so add tests to
detect bogus command line parameters as well, to keep ourselves from
introducing regressions.
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using the 'p'atch command, instead of just throwing out any mode
change, present it to the user in the same way that we show hunks.
This way, the mode change can be staged independently from the changes
to the contents.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a path is examined in the patch subcommand, any mode changes in
the file are given to use in the diff header by git-diff. If no hunks
are staged, then we throw out that header and do not touch the
path. But if _any_ hunks are staged, we use the header, and the mode
is changed together with the contents.
Since the 'p'atch command should just be dealing with hunks that are
shown to the user, it makes sense to just ignore mode changes
entirely. We do squirrel away the mode, though, since the next patch
will allow users to select the mode update separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Update draft release notes for 1.5.4.5
Documentation: clarify use of .git{ignore,attributes} versus .git/info/*
t/t3800-mktag.sh: use test_must_fail rather than '!'
Conflicts:
t/t3800-mktag.sh
When a git command is run under test_must_fail to make sure that
the argument parser catches bogus command line, it exits with 129.
We need to catch it as a valid "graceful error exit".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This actually sounds like a bug in cvsps, which requires an existing
home directory when asked for the usage through -h
$ HOME=/nonexistent cvsps -h
Cannot create the cvsps directory '.cvsps': No such file or directory
This made t9600 think that cvsps is not available if HOME did not exist,
causing the tests to be skipped
$ HOME=/nonexistent sh t9600-cvsimport.sh
* skipping cvsimport tests, cvsps not found
* passed all 0 test(s)
Now t9600 sets HOME to the current working directory before checking for
the availability of the cvsps program.
This issue has been discovered by Marco Rodrigues, and fixed by Frank
Lichtenheld through
http://bugs.debian.org/471969
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-fetch-regression-1.5.4:
git-fetch test: test tracking fetch results, not just FETCH_HEAD
Fix branches file configuration
Tighten refspec processing
Fix the wrong output of `git-show v1.3.0~155^2~4` in documentation.
We really should have done this long time ago. Existing t5515 test
was written for the specific purpose of catching regression to the
contents of generated FETCH_HEAD file, but it also is a good place
to make sure various fetch configurations do fetch what they intend
to fetch (and nothing else).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes the pattern matching code to not store the required final
/ before the *, and then to require each side to be a valid ref (or
empty). In particular, any refspec that looks like it should be a
pattern but doesn't quite meet the requirements will be found to be
invalid as a fallback non-pattern.
This was cherry picked from commit ef00d15 (Tighten refspec processing,
2008-03-17), and two fix-up commits 46220ca (remote.c: Fix overtight
refspec validation, 2008-03-20) and 7d19da4 (refspec: allow colon-less
wildcard "refs/category/*", 2008-03-25) squashed in.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, git-init tested for a valid HEAD ref, but if the repository
was empty, there was none. Instead, test for the existence of
the file $GIT_DIR/HEAD.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this the output of 'git remote show' does not end with a new-line:
bash> git remote show repo
* remote repo
URL: repo.or.cz:/srv/git/kdbg.git
Tracked remote branches
maint master mob
Local branch pushed with 'git push'
+master:masterbash>
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We tightened the refspec validation code in an earlier commit ef00d15
(Tighten refspec processing, 2008-03-17) per my suggestion, but the
suggestion was misguided to begin with and it broke this usage:
$ git push origin HEAD~12:master
The syntax of push refspecs and fetch refspecs are similar in that they
are both colon separated LHS and RHS (possibly prefixed with a + to
force), but the similarity ends there. For example, LHS in a push refspec
can be anything that evaluates to a valid object name at runtime (except
when colon and RHS is missing, or it is a glob), while it must be a
valid-looking refname in a fetch refspec. To validate them correctly, the
caller needs to be able to say which kind of refspecs they are. It is
unreasonable to keep a single interface that cannot tell which kind it is
dealing with, and ask it to behave sensibly.
This commit separates the parsing of the two into different functions, and
clarifies the code to implement the parsing proper (i.e. splitting into
two parts, making sure both sides are wildcard or neither side is).
This happens to also allow pushing a commit named with the esoteric "look
for that string" syntax:
$ git push ../test.git ':/remote.c: Fix overtight refspec:master'
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Give lib-git-svn.sh a few alternate paths to look for apache2.
Explicitly define the LockFile so httpd will actually start under OS X
Signed-off-by: Kevin Ballard <kevin@sb.org>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-svn project names are percent-escaped ever since f5530b8
(git-svn: support for funky branch and project names over HTTP(S),
2007-11-11).
Unfortunately this breaks the scenario where the user hands git-svn an
already-escaped URI. Fix the regexp to skip over what looks like
existing percent escapes, and test this scenario.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For symbolic refs, a sane notion of being "stale" is that the ref
they point to no longer exists. Since this is checked already,
"remote show" does not need to show them at all.
Incidentally, this fixes the issue that "HEAD" was shown as a
stale ref by "remote show" in a freshly cloned repository.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The revision limiter uses the commit date to decide when it has seen
enough commits to finalize the revision list, but that can get confused
if there are incorrect dates far in the past on some commits.
This makes the logic a bit more robust by
- we always walk an extra SLOP commits from the source list even if we
decide that the source list is probably all done (unless the source is
entirely empty, of course, because then we really can't do anything at
all)
- we keep track of the date of the last commit we added to the
destination list (this will *generally* be the oldest entry we've seen
so far)
- we compare that with the youngest entry (the first one) of the source
list, and if the destination is older than the source, we know we want
to look at the source.
which causes occasional date mishaps to be handled cleanly.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git-config name = value" doesn't do anything most of the time. The
test meant "git-config name value", but that leaves the configuration
such that later tests will be confused, so move it to the end.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This currently fails not because we refuse to check out, but because we
detect error but incorrectly discard it in the callchain.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When your test creates an unwritable directory that test framework cannot
clean out by "rm -fr trash", later tests cannot start in a fresh state
they expect to. Detect this and error out early.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a merge result creates a new file, and when our side already has a
file in the path, taking the merge result may clobber the untracked file.
However, the logic to detect this situation was totally the wrong way. We
should complain when the file exists, not when the file does not exist.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit 34110cd4e3 ("Make 'unpack_trees()'
have a separate source and destination index") I introduced a really
stupid bug in that it would always add merged entries with the CE_UPDATE
flag set. That caused us to always re-write the file, even when it was
already up-to-date in the source index.
Not only is that really stupid from a performance angle, but more
importantly it's actively wrong: if we have dirty state in the tree when
we merge, overwriting it with the result of the merge will incorrectly
overwrite that dirty state.
This trivially fixes the problem - simply don't set the CE_UPDATE flag
when the merge result matches the old state.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We had a handful test updates since we accepted 82ebb0b (add test_cmp
function for test scripts). This fixes them up.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/portable:
t6000lib: re-fix tr portability
t7505: use SHELL_PATH in hook
t9112: add missing #!/bin/sh header
filter-branch: use $SHELL_PATH instead of 'sh'
filter-branch: don't use xargs -0
add NO_EXTERNAL_GREP build option
t6000lib: tr portability fix
t4020: don't use grep -a
add test_cmp function for test scripts
remove use of "tail -n 1" and "tail -1"
grep portability fix: don't use "-e" or "-q"
more tr portability test script fixes
t0050: perl portability fix
tr portability fixes
Once upon a time shortlog could be run from a non-git directory
and still do its job. Fix this regression and add a small test
for it.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, the callchain from pretty_print_commit() down to pp_title_line()
had an unwarranted assumption that the presense of "after_subject"
parameter, means the caller has already output MIME headers for
attachments. The parameter's primary purpose is to give extra header
lines the caller wants to place after pp_title_line() generates the
"Subject: " line.
This assumption does not hold when the user used the format.header
configuration variable to pass extra headers, and caused a message with
non-ASCII character to lack proper MIME headers (e.g. 8-bit CTE header).
The earlier logic also failed to suppress duplicated MIME headers when
"format-patch -s --attach" is asked for and the signer's name demanded
8-bit clean transport.
This patch fixes the logic by introducing a separate need_8bit_cte
parameter passed down the callchain. This can have one of these values:
-1 : we've already done MIME crap and we do not want to add extra header
to say this is 8bit in pp_title_line();
0 : we haven't done MIME and we have not seen anything that is 8bit yet;
1 : we haven't done MIME and we have seen something that is 8bit;
pp_title_line() must add MIME header.
It adds two tests by Jeff King who independently diagnosed this issue.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It seems that some implementations of tr don't like a
replacement string of '-----...'; they try to find the
double-dash option "---...".
Instead of this pipeline of tr and sed invocations, just use a
single perl invocation.
Signed-off-by: Jeff King <peff@peff.net>
* maint:
merge-file: handle empty files gracefully
merge-recursive: handle file mode changes
Minor wording changes in the keyboard descriptions in git-add --interactive.
git fetch: Take '-n' to mean '--no-tags'
quiltimport: fix misquoting of parsed -p<num> parameter
git-quiltimport: better parser to grok "enhanced" series files.
File mode changes should be handled similarly to changes of content.
That is, if the file mode changed in only one branch, keep the changed
version, and if both branch changed to different mode, mark it as a
conflict.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The hook doesn't run properly under Solaris /bin/sh. Let's
use the SHELL_PATH the user told us about already instead.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some versions of tr complain if the number of characters in
both sets isn't the same. So here we must manually expand
the dashes in set2.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Solaris /usr/bin/grep doesn't understand "-a". In this case
we can just include the expected output with the test, which
is a better test anyway.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many scripts compare actual and expected output using
"diff -u". This is nicer than "cmp" because the output shows
how the two differ. However, not all versions of diff
understand -u, leading to unnecessary test failure.
This adds a test_cmp function to the test scripts and
switches all "diff -u" invocations to use it. The function
uses the contents of "$GIT_TEST_CMP" to compare its
arguments; the default is "diff -u".
On systems with a less-capable diff, you can do:
GIT_TEST_CMP=cmp make test
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
