"git am -3" calls "git merge-recursive" when it needs to fall back
to a three-way merge; this call has been turned into an internal
subroutine call instead of spawning a separate subprocess.
* js/am-3-merge-recursive-direct:
merge-recursive: flush output buffer even when erroring out
merge_trees(): ensure that the callers release output buffer
merge-recursive: offer an option to retain the output in 'obuf'
merge-recursive: write the commit title in one go
merge-recursive: flush output buffer before printing error messages
am -3: use merge_recursive() directly again
merge-recursive: switch to returning errors instead of dying
merge-recursive: handle return values indicating errors
merge-recursive: allow write_tree_from_memory() to error out
merge-recursive: avoid returning a wholesale struct
merge_recursive: abort properly upon errors
prepare the builtins for a libified merge_recursive()
merge-recursive: clarify code in was_tracked()
die(_("BUG")): avoid translating bug messages
die("bug"): report bugs consistently
t5520: verify that `pull --rebase` shows the helpful advice when failing
"git -c grep.patternType=extended log --basic-regexp" misbehaved
because the internal API to access the grep machinery was not
designed well.
* jc/grep-commandline-vs-configuration:
grep: further simplify setting the pattern type
The vast majority of error messages in Git's source code which report a
bug use the convention to prefix the message with "BUG:".
As part of cleaning up merge-recursive to stop die()ing except in case of
detected bugs, let's just make the remainder of the bug reports consistent
with the de facto rule.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When c5c31d33 (grep: move pattern-type bits support to top-level
grep.[ch], 2012-10-03) introduced grep_commit_pattern_type() helper
function, the intention was to allow the users of grep API to having
to fiddle only with .pattern_type_option (which can be set to "fixed",
"basic", "extended", and "pcre"), and then immediately before compiling
the pattern strings for use, call grep_commit_pattern_type() to have
it prepare various bits in the grep_opt structure (like .fixed,
.regflags, etc.).
However, grep_set_pattern_type_option() helper function the grep API
internally uses were left as an external function by mistake. This
function shouldn't have been made callable by the users of the API.
Later when the grep API was used in revision traversal machinery,
the caller then mistakenly started calling the function around
34a4ae55 (log --grep: use the same helper to set -E/-F options as
"git grep", 2012-10-03), instead of setting the .pattern_type_option
field and letting the grep_commit_pattern_type() to take care of the
details.
This caused an unnecessary bug that made a configured
grep.patternType take precedence over the command line options
(e.g. --basic-regexp, --fixed-strings) in "git log" family of
commands.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git grep -i" has been taught to fold case in non-ascii locales
correctly.
* nd/icase:
grep.c: reuse "icase" variable
diffcore-pickaxe: support case insensitive match on non-ascii
diffcore-pickaxe: Add regcomp_or_die()
grep/pcre: support utf-8
gettext: add is_utf8_locale()
grep/pcre: prepare locale-dependent tables for icase matching
grep: rewrite an if/else condition to avoid duplicate expression
grep/icase: avoid kwsset when -F is specified
grep/icase: avoid kwsset on literal non-ascii strings
test-regex: expose full regcomp() to the command line
test-regex: isolate the bug test code
grep: break down an "if" stmt in preparation for next changes
In the previous change in this function, we add locale support for
single-byte encodings only. It looks like pcre only supports utf-* as
multibyte encodings, the others are left in the cold (which is
fine).
We need to enable PCRE_UTF8 so pcre can find character boundary
correctly. It's needed for case folding (when --ignore-case is used)
or '*', '+' or similar syntax is used.
The "has_non_ascii()" check is to be on the conservative side. If
there's non-ascii in the pattern, the searched content could still be
in utf-8, but we can treat it just like a byte stream and everything
should work. If we force utf-8 based on locale only and pcre validates
utf-8 and the file content is in non-utf8 encoding, things break.
Noticed-by: Plamen Totev <plamen.totev@abv.bg>
Helped-by: Plamen Totev <plamen.totev@abv.bg>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default tables are usually built with C locale and only suitable
for LANG=C or similar. This should make case insensitive search work
correctly for all single-byte charsets.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"!icase || ascii_only" is repeated twice in this if/else chain as this
series evolves. Rewrite it (and basically revert the first if
condition back to before the "grep: break down an "if" stmt..." commit).
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to the previous commit, we can't use kws on icase search
outside ascii range. But we can't simply pass the pattern to
regcomp/pcre like the previous commit because it may contain regex
special characters, so we need to quote the regex first.
To avoid misquote traps that could lead to undefined behavior, we
always stick to basic regex engine in this case. We don't need fancy
features for grepping a literal string anyway.
basic_regex_quote_buf() assumes that if the pattern is in a multibyte
encoding, ascii chars must be unambiguously encoded as single
bytes. This is true at least for UTF-8. For others, let's wait until
people yell up. Chances are nobody uses multibyte, non utf-8 charsets
anymore.
Noticed-by: Plamen Totev <plamen.totev@abv.bg>
Helped-by: René Scharfe <l.s.r@web.de>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we detect the pattern is just a literal string, we avoid heavy
regex engine and use fast substring search implemented in kwsset.c.
But kws uses git-ctype which is locale-independent so it does not know
how to fold case properly outside ascii range. Let regcomp or pcre
take care of this case instead. Slower, but accurate.
Noticed-by: Plamen Totev <plamen.totev@abv.bg>
Helped-by: René Scharfe <l.s.r@web.de>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git show -W" (extend hunks to cover the entire function, delimited
by lines that match the "funcname" pattern) used to show the entire
file when a change added an entire function at the end of the file,
which has been fixed.
* rs/xdiff-hunk-with-func-line:
xdiff: fix merging of appended hunk with -W
grep: -W: don't extend context to trailing empty lines
t7810: add test for grep -W and trailing empty context lines
xdiff: don't trim common tail with -W
xdiff: -W: don't include common trailing empty lines in context
xdiff: ignore empty lines before added functions with -W
xdiff: handle appended chunks better with -W
xdiff: factor out match_func_rec()
t4051: rewrite, add more tests
Empty lines between functions are shown by grep -W, as it considers them
to be part of the function preceding them. They are not interesting in
most languages. The previous patches stopped showing them for diff -W.
Stop showing empty lines trailing a function with grep -W. Grep scans
the lines of a buffer from top to bottom and prints matching lines
immediately. Thus we need to peek ahead in order to determine if an
empty line is part of a function body and worth showing or not.
Remember how far ahead we peeked in order to avoid having to do so
repeatedly when handling multiple consecutive empty lines.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While at there, improve the error message a bit (what operation failed?)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We frequently allocate strings as xmalloc(len + 1), where
the extra 1 is for the NUL terminator. This can be done more
simply with xmallocz, which also checks for integer
overflow.
There's no case where switching xmalloc(n+1) to xmallocz(n)
is wrong; the result is the same length, and malloc made no
guarantees about what was in the buffer anyway. But in some
cases, we can stop manually placing NUL at the end of the
allocated buffer. But that's only safe if it's clear that
the contents will always fill the buffer.
In each case where this patch does so, I manually examined
the control flow, and I tried to err on the side of caution.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To set up default colors, we sometimes strcpy() from the
default string literals into our color buffers. This isn't a
bug (assuming the destination is COLOR_MAXLEN bytes), but
makes it harder to audit the code for problematic strcpy
calls.
Let's introduce a color_set which copies under the
assumption that there are COLOR_MAXLEN bytes in the
destination (of course you can call it on a smaller buffer,
so this isn't providing a huge amount of safety, but it's
more convenient than calling xsnprintf yourself).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This looks at first glance like the sprintf can overflow our
buffer, but it's actually fine; the p->origin string is
something constant and small, like "command line" or "-e
option".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git blame HEAD -- missing" failed to correctly say "HEAD" when it
tried to say "No such path 'missing' in HEAD".
* jk/blame-commit-label:
blame.c: fix garbled error message
use xstrdup_or_null to replace ternary conditionals
builtin/commit.c: use xstrdup_or_null instead of envdup
builtin/apply.c: use xstrdup_or_null instead of null_strdup
git-compat-util: add xstrdup_or_null helper
This replaces "x ? xstrdup(x) : NULL" with xstrdup_or_null(x).
The change is fairly mechanical, with the exception of
resolve_refdup, which can eliminate a temporary variable.
There are still a few hits grepping for "?.*xstrdup", but
these are of slightly different forms and cannot be
converted (e.g., "x ? xstrdup(x->foo) : NULL").
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow painting or not painting (partial) matches in context lines
when showing "grep -C<num>" output in color.
* rs/grep-color-words:
grep: add color.grep.matchcontext and color.grep.matchselected
The config option color.grep.match can be used to specify the highlighting
color for matching strings. Add the options matchContext and matchSelected
to allow different colors to be specified for matching strings in the
context vs. in selected lines. This is similar to the ms and mc specifiers
in GNU grep's environment variable GREP_COLORS.
Tests are from Zoltan Klinger's earlier attempt to solve the same
issue in a different way.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally the color-parsing function was used only for
config variables. It made sense to pass the variable name so
that the die() message could be something like:
$ git -c color.branch.plain=bogus branch
fatal: bad color value 'bogus' for variable 'color.branch.plain'
These days we call it in other contexts, and the resulting
error messages are a little confusing:
$ git log --pretty='%C(bogus)'
fatal: bad color value 'bogus' for variable '--pretty format'
$ git config --get-color foo.bar bogus
fatal: bad color value 'bogus' for variable 'command line'
This patch teaches color_parse to complain only about the
value, and then return an error code. Config callers can
then propagate that up to the config parser, which mentions
the variable name. Other callers can provide a custom
message. After this patch these three cases now look like:
$ git -c color.branch.plain=bogus branch
error: invalid color value: bogus
fatal: unable to parse 'color.branch.plain' from command-line config
$ git log --pretty='%C(bogus)'
error: invalid color value: bogus
fatal: unable to parse --pretty format
$ git config --get-color foo.bar bogus
error: invalid color value: bogus
fatal: unable to parse default color value
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a configuration variable to force --full-name to be default for
"git grep".
This may cause regressions on scripted users that do not expect
this new behaviour.
* as/grep-fullname-config:
grep: add grep.fullName config variable
This configuration variable sets the default for the --full-name option.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git grep" learns to handle combination of "-h (no header)" and "-c
(counts)".
* rs/grep-h-c:
grep: support -h (no header) with --count
t7810: add missing variables to tests in loop
Suppress printing the header (filename) with -h even if in -c/--count
mode. GNU grep and OpenBSD's grep do the same.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We invented hashcpy() to keep the abstraction of "object name"
behind it. Use it instead of calling memcpy() with hard-coded
20-byte length when moving object names between pieces of memory.
Leave ppc/sha1.c as-is, because the function is about the SHA-1 hash
algorithm whose output is and will always be 20 bytes.
Helped-by: Michael Haggerty <mhagger@alum.mit.edu>
Helped-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Sun He <sunheehnus@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recently and not so recently, we made sure that log/grep type operations
use textconv filters when a userfacing diff would do the same:
ef90ab6 (pickaxe: use textconv for -S counting, 2012-10-28)
b1c2f57 (diff_grep: use textconv buffers for add/deleted files, 2012-10-28)
0508fe5 (combine-diff: respect textconv attributes, 2011-05-23)
"git grep" currently does not use textconv filters at all, that is
neither for displaying the match and context nor for the actual grepping,
even when requested by --textconv.
Introduce an option "--textconv" which makes git grep use any configured
textconv filters for grepping and output purposes. It is off by default.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a GREP_HEADER_FIELD_MIN so we can check that the field value is
sane and silence the clang warning.
Clang warning happens because the enum is unsigned (this is
implementation-defined, and there is no negative fields) and the check
is then tautological.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: John Keeping <john@keeping.me.uk>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git grep -e pattern <tree>" asked the attribute system to read
"<tree>:.gitattributes" file in the working tree, which was
nonsense.
* nd/grep-true-path:
grep: stop looking at random places for .gitattributes
grep searches for .gitattributes using "name" field in struct
grep_source but that field is not real on-disk path name. For example,
"grep pattern rev" fills the field with "rev:path", and Git looks for
.gitattributes in the (non-existent but exploitable) path "rev:path"
instead of "path".
This patch passes real paths down to grep_source_load_driver() when:
- grep on work tree
- grep on the index
- grep a commit (or a tag if it points to a commit)
so that these cases look up .gitattributes at proper paths.
.gitattributes lookup is disabled in all other cases.
Initial-work-by: Jeff King <peff@peff.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using the hand-rolled initialization sequence,
use grep_init() to populate the necessary bits. This opens
the door to allow the calling commands to optionally read
grep.* configuration variables via git_config() if they
want to.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Switching between -E/-G/-P/-F correctly needs a lot more than just
flipping opt->regflags bit these days, and we have a nice helper
function buried in builtin/grep.c for the sole use of "git grep".
Extract it so that "log --grep" family can also use it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The configuration handling is a library-ish part of this program,
that is not specific to "git grep" command. It should be reusable
by "log" and others.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to --author/--committer which filters commits by author and
committer header fields. --grep-reflog adds a fake "reflog" header to
commit and a grep filter to search on that line.
All rules to --author/--committer apply except no timestamp stripping.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
grep supports only author and committer headers, which have the same
special treatment that later headers may or may not have. Check for
field type and only strip_timestamp() when the field is either author
or committer.
GREP_HEADER_FIELD_MAX is put in the grep_header_field enum to be
calculated automatically, correctly, as long as it's at the end of the
enum.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adding a declaration at the beginning is not sufficient for obvious
reasons. The definition has to be made static.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we have both header expression (which has to be an OR node by
construction) and a pattern expression (which could be anything), we
create a new top-level OR node to bind them together, and the
resulting expression structure looks like this:
OR
/ \
/ \
pattern OR
/ \ / \
..... committer OR
/ \
author TRUE
The three elements on the top-level backbone that are inspected by
the "all-match" logic are "pattern", "committer" and "author". When
there are more than one elements in the "pattern", the top-level
node of the "pattern" part of the subtree is an OR, and that node is
inspected by "all-match".
The result ends up ignoring the "--all-match" given from the command
line. A match on either side of the pattern is considered a match,
hence:
git log --grep=A --grep=B --author=C --all-match
shows the same "authored by C and has either A or B" that is correct
only when run without "--all-match".
Fix this by turning the resulting expression around when "--all-match"
is in effect, like this:
OR
/ \
/ \
/ OR
committer / \
author \
pattern
The set of nodes on the top-level backbone in the resulting
expression becomes "committer", "author", and the nodes that are on
the top-level backbone of the "pattern" subexpression. This makes
the "all-match" logic inspect the same nodes in "pattern" as the
case without the author and/or the committer restriction, and makes
the earlier "log" example to show "authored by C and has A and has
B", which is what the command line expects.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our "grep" allows complex boolean expressions to be formed to match
each individual line with operators like --and, '(', ')' and --not.
Introduce the "--debug" option to show the parse tree to help people
who want to debug and enhance it.
Also "log" learns "--grep-debug" option to do the same. The command
line parser to the log family is a lot more limited than the general
"git grep" parser, but it has special handling for header matching
(e.g. "--author"), and a parse tree is valuable when working on it.
Note that "--all-match" is *not* any individual node in the parse
tree. It is an instruction to the evaluator to check all the nodes
in the top-level backbone have matched and reject a document as
non-matching otherwise.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git grep -e '$pattern'", unlike the case where the patterns are read from
a file, did not treat individual lines in the given pattern argument as
separate regular expressions as it should.
By René Scharfe
* rs/maint-grep-F:
grep: stop leaking line strings with -f
grep: support newline separated pattern list
grep: factor out do_append_grep_pat()
grep: factor out create_grep_pat()
Currently, patterns that contain newline characters don't match anything
when given to git grep. Regular grep(1) interprets patterns as lists of
newline separated search strings instead.
Implement this functionality by creating and inserting extra grep_pat
structures for patterns consisting of multiple lines when appending to
the pattern lists. For simplicity, all pattern strings are duplicated.
The original pattern is truncated in place to make it contain only the
first line.
Requested-by: Torne (Richard Coles) <torne@google.com>
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add do_append_grep_pat() as a shared function for adding patterns to
the header pattern list and the general pattern list.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add create_grep_pat(), a shared helper for all grep pattern allocation
and initialization needs.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By Junio C Hamano (2) and Ramsay Jones (1)
* jc/pickaxe-ignore-case:
ctype.c: Fix a sparse warning
pickaxe: allow -i to search in patch case-insensitively
grep: use static trans-case table
In order to prepare the kwset machinery for a case-insensitive search, we
used to use a static table of 256 elements and filled it every time before
calling kwsalloc(). Because the kwset machinery will never modify this
table, just allocate a single instance globally and fill it at the compile
time.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
