When the list is truly limited and get_revision_1() returned NULL,
the code incorrectly returned it without switching to boundary emiting
mode. Silly.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This moves the code to set SHOWN on the commit from get_revision_1()
back to get_revision(), so that the bit means what it originally
meant: this commit has been given back to the caller.
Also it fixes the --reverse breakage Dscho pointed out.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This removes the flag internally used by revision traversal to
decide which commits are indeed boundaries and renames it to
CHILD_SHOWN. builtin-bundle uses the symbol for its
verification, but I think the logic it uses it is wrong. The
flag is still useful but it is local to the git-bundle, so it is
renamed to PREREQ_MARK.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This cleans up the boundary processing in the commit walker. It
- rips out the boundary logic from the commit walker. Placing
"negative" commits in the revs->commits list was Ok if all we
cared about "boundary" was the UNINTERESTING limiting case,
but conceptually it was wrong.
- makes get_revision_1() function to walk the commits and return
the results as if there is no funny postprocessing flags such
as --reverse, --skip nor --max-count.
- makes get_revision() function the postprocessing phase:
If reverse is given, wait for get_revision_1() to give
everything that it would normally give, and then reverse it
before consuming.
If skip is given, skip that many before going further.
If max is given, stop when we gave out that many.
Now that we are about to return one positive commit, mark
the parents of that commit to be potential boundaries
before returning, iff we are doing the boundary processing.
Return the commit.
- After get_revision() finishes giving out all the positive
commits, if we are doing the boundary processing, we look at
the parents that we marked as potential boundaries earlier,
see if they are really boundaries, and give them out.
It loses more code than it adds, even when the new gc_boundary()
function, which is purely for early optimization, is counted.
Note that this patch is purely for eyeballing and discussion
only. It breaks git-bundle's verify logic because the logic
does not use BOUNDARY_SHOW flag for its internal computation
anymore. After we correct it not to attempt to affect the
boundary processing by setting the BOUNDARY_SHOW flag, we can
remove BOUNDARY_SHOW from revision.h and use that bit assignment
for the new CHILD_SHOWN flag.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
builtin-fmt-merge-msg: fix bugs in --file option
index-pack: Loop over pread until data loading is complete.
blameview: Fix the browse behavior in blameview
Fix minor typos/grammar in user-manual.txt
Correct ordering in git-cvsimport's option documentation
git-show: Reject native ref
Fix git-show man page formatting in the EXAMPLES section
So when we do
git show v1.4.4..v1.5.0
that's an illogical thing to do, since "git show" is defined to be a
non-revision-walking action, which means the range operator be pointless
and wrong. The fact that we happily accept it (and then _only_ show
v1.5.0, which is the positive end of the range) is quite arguably not very
logical.
We should complain, and say that you can only do "no_walk" with positive
refs. Negative object refs really don't make any sense unless you walk
the obejct list (or you're "git diff" and know about ranges explicitly).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
There were instances of strncmp() that were formatted improperly
(e.g. whitespace around parameter before closing parenthesis)
that caused the earlier mechanical conversion step to miss
them. This step cleans them up.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This mechanically converts strncmp() to use prefixcmp(), but only when
the parameters match specific patterns, so that they can be verified
easily. Leftover from this will be fixed in a separate step, including
idiotic conversions like
if (!strncmp("foo", arg, 3))
=>
if (!(-prefixcmp(arg, "foo")))
This was done by using this script in px.perl
#!/usr/bin/perl -i.bak -p
if (/strncmp\(([^,]+), "([^\\"]*)", (\d+)\)/ && (length($2) == $3)) {
s|strncmp\(([^,]+), "([^\\"]*)", (\d+)\)|prefixcmp($1, "$2")|;
}
if (/strncmp\("([^\\"]*)", ([^,]+), (\d+)\)/ && (length($1) == $3)) {
s|strncmp\("([^\\"]*)", ([^,]+), (\d+)\)|(-prefixcmp($2, "$1"))|;
}
and running:
$ git grep -l strncmp -- '*.c' | xargs perl px.perl
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now, when saying --max-age=<timestamp>, or --max-count=<n>, together
with --boundary, rev-list prints the boundary commits, i.e. the
commits which are _just_ not shown without --boundary, i.e. their
children are, but they aren't.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Similar to commit eb8381c8, we need to use for_each_reflog() to make
sure we do not miss objects reachable from HEAD reflog.
Signed-off-by: Junio C Hamano <junkio@cox.net>
A short-hand "-g" for "git log --walk-reflogs" and "git
show-branch --reflog" makes it easier to access the reflog
info.
[jc: added -g to show-branch for symmetry]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The option --reverse reverses the order of the commits.
[jc: with comments on rev_info.reverse from Simon 'corecode' Schubert.]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When called with "--walk-reflogs", as long as there are reflogs
available, the walker will take this information into account, rather
than the parent information in the commit object.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It used to ignore the return value of the helper function; now, it
expects it to return 0, and stops iteration upon non-zero return
values; this value is then passed on as the return value of
for_each_reflog_ent().
Further, it makes no sense to force the parsing upon the helper
functions; for_each_reflog_ent() now calls the helper function with
old and new sha1, the email, the timestamp & timezone, and the message.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/fsck-reflog:
Add git-reflog to .gitignore
reflog expire: do not punt on tags that point at non commits.
reflog expire: prune commits that are not incomplete
Don't crash during repack of a reflog with pruned commits.
git reflog expire
Move in_merge_bases() to commit.c
reflog: fix warning message.
Teach git-repack to preserve objects referred to by reflog entries.
Protect commits recorded in reflog from pruning.
add for_each_reflog_ent() iterator
If the user has been using reflog for a long time (e.g. since its
introduction) then it is very likely that an existing branch's
reflog may still mention commits which have long since been pruned
out of the repository.
Rather than aborting with a very useless error message during
git-repack, pack as many valid commits as we can get from the
reflog and let the user know that the branch's reflog contains
already pruned commits. A future 'git reflog expire' (or whatever
it finally winds up being called) can then be performed to expunge
those reflog entries.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds a new option --reflog to pack-objects and revision
machinery; do not bother documenting it for now, since this is
only useful for local repacking.
When the option is passed, objects reachable from reflog entries
are marked as interesting while computing the set of objects to
pack.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds --skip=<n> option to revision traversal machinery.
Documentation and test were added by Robert Fitzsimons.
Signed-off-by: Robert Fitzsimons <robfitz@273k.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a mechanical clean-up of the way *.c files include
system header files.
(1) sources under compat/, platform sha-1 implementations, and
xdelta code are exempt from the following rules;
(2) the first #include must be "git-compat-util.h" or one of
our own header file that includes it first (e.g. config.h,
builtin.h, pkt-line.h);
(3) system headers that are included in "git-compat-util.h"
need not be included in individual C source files.
(4) "git-compat-util.h" does not have to include subsystem
specific header files (e.g. expat.h).
Signed-off-by: Junio C Hamano <junkio@cox.net>
This reverts commit 5761231975.
Feeding symmetric difference to gitk is so useful, and it is the
same for other graphical Porcelains. Rather than forcing them
to pass --no-left-right, making it optional.
Noticed and reported by Jeff King.
When using symmetric differences, I think the user almost always
would want to know which side of the symmetry each commit came
from. So this removes --left-right option from the command
line, and turns it on automatically when a symmetric difference
is used ("git log --merge" counts as a symmetric difference
between HEAD and MERGE_HEAD).
Just in case, a new option --no-left-right is provided to defeat
this, but I do not know if it would be useful.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The output from "symmetric diff", i.e. A...B, does not
distinguish between commits that are reachable from A and the
ones that are reachable from B. In this picture, such a
symmetric diff includes commits marked with a and b.
x---b---b branch B
/ \ /
/ .
/ / \
o---x---a---a branch A
However, you cannot tell which ones are 'a' and which ones are
'b' from the output. Sometimes this is frustrating. This adds
an output option, --left-right, to rev-list.
rev-list --left-right A...B
would show ones reachable from A prefixed with '<' and the ones
reachable from B prefixed with '>'.
When combined with --boundary, boundary commits (the ones marked
with 'x' in the above picture) are shown with prefix '-', so you
would see list that looks like this:
git rev-list --left-right --boundary --pretty=oneline A...B
>bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb 3rd on b
>bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb 2nd on b
<aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 3rd on a
<aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 2nd on a
-xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 1st on b
-xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 1st on a
Signed-off-by: Junio C Hamano <junkio@cox.net>
* lj/refs: (63 commits)
Fix show-ref usagestring
t3200: git-branch testsuite update
sha1_name.c: avoid compilation warnings.
Make git-branch a builtin
ref-log: fix D/F conflict coming from deleted refs.
git-revert with conflicts to behave as git-merge with conflicts
core.logallrefupdates thinko-fix
git-pack-refs --all
core.logallrefupdates create new log file only for branch heads.
Remove bashism from t3210-pack-refs.sh
ref-log: allow ref@{count} syntax.
pack-refs: call fflush before fsync.
pack-refs: use lockfile as everybody else does.
git-fetch: do not look into $GIT_DIR/refs to see if a tag exists.
lock_ref_sha1_basic does not remove empty directories on BSD
Do not create tag leading directories since git update-ref does it.
Check that a tag exists using show-ref instead of looking for the ref file.
Use git-update-ref to delete a tag instead of rm()ing the ref file.
Fix refs.c;:repack_without_ref() clean-up path
Clean up "git-branch.sh" and add remove recursive dir test cases.
...
This is a shorthand for "<rev> --not <rev>^@", i.e. "include
this commit but exclude any of its parents".
When a new file $F is introduced by revision $R, this notation
can be used to find a copy-and-paste from existing file in the
parents of that revision without annotating the ancestry of the
lines that were copied from:
git pickaxe -f -C $R^! -- $F
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
revision traversal: --unpacked does not limit commit list anymore.
Continue traversal when rev-list --unpacked finds a packed commit.
Use memmove instead of memcpy for overlapping areas
quote.c: ensure the same quoting across platforms.
Surround "#define DEBUG 0" with "#ifndef DEBUG..#endif"
When getting the list of all unpacked objects by walking the commit history,
we would stop traversal whenever we hit a packed commit. However the fact
that we found a packed commit does not guarantee that all previous commits
are also packed. As a result the commit walkers did not show all reachable
unpacked objects.
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This lets you say:
git log --all-match --author=Linus --committer=Junio --grep=rev-list
to limit commits that was written by Linus, committed by me and
the log message contains word "rev-list".
Signed-off-by: Junio C Hamano <junkio@cox.net>
* master: (72 commits)
runstatus: do not recurse into subdirectories if not needed
grep: fix --fixed-strings combined with expression.
grep: free expressions and patterns when done.
Corrected copy-and-paste thinko in ignore executable bit test case.
An illustration of rev-list --parents --pretty=raw
Allow git-checkout when on a non-existant branch.
gitweb: Decode long title for link tooltips
git-svn: Fix fetch --no-ignore-externals with GIT_SVN_NO_LIB=1
Ignore executable bit when adding files if filemode=0.
Remove empty ref directories that prevent creating a ref.
Use const for interpolate arguments
git-archive: update documentation
Deprecate merge-recursive.py
gitweb: fix over-eager application of esc_html().
Allow '(no author)' in git-svn's authors file.
Allow 'svn fetch' on '(no date)' revisions in Subversion.
git-repack: allow git-repack to run in subdirectory
Remove upload-tar and make git-tar-tree a thin wrapper to git-archive
git-tar-tree: Move code for git-archive --format=tar to archive-tar.c
git-tar-tree: Remove duplicate git_config() call
...
This adds a "int *flag" parameter to resolve_ref() and makes
for_each_ref() family to call callback function with an extra
"int flag" parameter. They are used to give two bits of
information (REF_ISSYMREF and REF_ISPACKED) about the ref.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a long overdue fix to the API for for_each_ref() family
of functions. It allows the callers to specify a callback data
pointer, so that the caller does not have to use static
variables to communicate with the callback funciton.
The updated for_each_ref() family takes a function of type
int (*fn)(const char *, const unsigned char *, void *)
and a void pointer as parameters, and calls the function with
the name of the ref and its SHA-1 with the caller-supplied void
pointer as parameters.
The commit updates two callers, builtin-name-rev.c and
builtin-pack-refs.c as an example.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now we can tell the built-in grep to grep only in head or in
body, use that to update --author, --committer, and --grep.
Unfortunately, to make --and, --not and other grep boolean
expressions useful, as in:
# Things written by Junio committed and by Linus and log
# does not talk about diff.
git log --author=Junio --and --committer=Linus \
--grep-not --grep=diff
we will need to do another round of built-in grep core
enhancement, because grep boolean expressions are designed to
work on one line at a time.
Signed-off-by: Junio C Hamano <junkio@cox.net>
I know that I'd prefer a rule where
"--author=^Junio"
would result in the grep-pattern being "^author Junio", but without the
initial '^' it would be "^author .*Junio".
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds three options to setup_revisions(), which lets you
filter resulting commits by the author name, the committer name
and the log message with regexp.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is from a suggestion by Linus, just to mark the locations where we
need to modify to actually implement the filtering.
We do not have any actual filtering code yet.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Incremental repack without -a essentially boils down to:
rev-list --objects --unpacked --all |
pack-objects $new_pack
which picks up all loose objects that are still live and creates
a new pack.
This implements --unpacked=<existing pack> option to tell the
revision walking machinery to pretend as if objects in such a
pack are unpacked for the purpose of object listing. With this,
we could say:
rev-list --objects --unpacked=$active_pack --all |
pack-objects $new_pack
instead, to mean "all live loose objects but pretend as if
objects that are in this pack are also unpacked". The newly
created pack would be perfect for updating $active_pack by
replacing it.
Since pack-objects now knows how to do the rev-list's work
itself internally, you can also write the above example by:
pack-objects --unpacked=$active_pack --all $new_pack </dev/null
Signed-off-by: Junio C Hamano <junkio@cox.net>
setup_revisions() wants to get all the parameters at once and
then postprocesses the resulting revs structure after it is done
with them. This code structure is a bit cumbersome to deal with
efficiently when we want to inject revision parameters from the
side (e.g. read from standard input).
Fortunately, the nature of this postprocessing is not affected by
revision parameters; they are affected only by flags. So it is
Ok to do add_object() after the it returns.
This splits out the code that deals with the revision parameter
out of the main loop of setup_revisions(), so that we can later
call it from elsewhere after it returns.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This abstracts away the size of the hash values when copying them
from memory location to memory location, much as the introduction
of hashcmp abstracted away hash value comparsion.
A few call sites were using char* rather than unsigned char* so
I added the cast rather than open hashcpy to be void*. This is a
reasonable tradeoff as most call sites already use unsigned char*
and the existing hashcmp is also declared to be unsigned char*.
[jc: Splitted the patch to "master" part, to be followed by a
patch for merge-recursive.c which is not in "master" yet.
Fixed the cast in the latter hunk to combine-diff.c which was
wrong in the original.
Also converted ones left-over in combine-diff.c, diff-lib.c and
upload-pack.c ]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
