Using read() instead of mmap() can be 39% speed up for 1Kb files and is
1% speed up 1Mb files. For larger files, it is better to use mmap(),
because the difference between is not significant, and when there is not
enough memory, mmap() performs much better, because it avoids swapping.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no real advantage to malloc the whole output buffer and
deflate the data in a single pass when writing loose objects. That is
like only 1% faster while using more memory, especially with large
files where memory usage is far more. It is best to deflate and write
the data out in small chunks reusing the same memory instead.
For example, using 'git add' on a few large files averaging 40 MB ...
Before:
21.45user 1.10system 0:22.57elapsed 99%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+828040outputs (0major+142640minor)pagefaults 0swaps
After:
21.50user 1.25system 0:22.76elapsed 99%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+828040outputs (0major+104408minor)pagefaults 0swaps
While the runtime stayed relatively the same, the number of minor page
faults went down significantly.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The implementation is also lightly modified to use is_dir_sep()
instead of hardcoding '/'.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
[jc: later NUL termination by the caller becomes unnecessary]
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the documentation says, this is primarily for debugging, and
in the longer term we should rename it to test-show-index or something.
In the meantime, just avoid xmalloc (which slurps in the rest of git), and
separating out the trivial hex functions into "hex.o".
This results in
[torvalds@nehalem git]$ size git-show-index
text data bss dec hex filename
222818 2276 112688 337782 52776 git-show-index (before)
5696 624 1264 7584 1da0 git-show-index (after)
which is a whole lot better.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The loop in get_size_from_delta() feeds a deflated delta data from the
pack stream _until_ we get inflated result of 20 bytes[*] or we reach the
end of stream.
Side note. This magic number 20 does not have anything to do with the
size of the hash we use, but comes from 1a3b55c (reduce delta head
inflated size, 2006-10-18).
The loop reads like this:
do {
in = use_pack();
stream.next_in = in;
st = git_inflate(&stream, Z_FINISH);
curpos += stream.next_in - in;
} while ((st == Z_OK || st == Z_BUF_ERROR) &&
stream.total_out < sizeof(delta_head));
This git_inflate() can return:
- Z_STREAM_END, if use_pack() fed it enough input and the delta itself
was smaller than 20 bytes;
- Z_OK, when some progress has been made;
- Z_BUF_ERROR, if no progress is possible, because we either ran out of
input (due to corrupt pack), or we ran out of output before we saw the
end of the stream.
The fix b3118bd (sha1_file: Fix infinite loop when pack is corrupted,
2009-10-14) attempted was against a corruption that appears to be a valid
stream that produces a result larger than the output buffer, but we are
not even trying to read the stream to the end in this loop. If avail_out
becomes zero, total_out will be the same as sizeof(delta_head) so the loop
will terminate without the "fix". There is no fix from b3118bd needed for
this loop, in other words.
The loop in unpack_compressed_entry() is quite a different story. It
feeds a deflated stream (either delta or base) and allows the stream to
produce output up to what we expect but no more.
do {
in = use_pack();
stream.next_in = in;
st = git_inflate(&stream, Z_FINISH);
curpos += stream.next_in - in;
} while (st == Z_OK || st == Z_BUF_ERROR)
This _does_ risk falling into an endless interation, as we can exhaust
avail_out if the length we expect is smaller than what the stream wants to
produce (due to pack corruption). In such a case, avail_out will become
zero and inflate() will return Z_BUF_ERROR, while avail_in may (or may
not) be zero.
But this is not a right fix:
do {
in = use_pack();
stream.next_in = in;
st = git_inflate(&stream, Z_FINISH);
+ if (st == Z_BUF_ERROR && (stream.avail_in || !stream.avail_out)
+ break; /* wants more input??? */
curpos += stream.next_in - in;
} while (st == Z_OK || st == Z_BUF_ERROR)
as Z_BUF_ERROR from inflate() may be telling us that avail_in has also run
out before reading the end of stream marker. In such a case, both avail_in
and avail_out would be zero, and the loop should iterate to allow the end
of stream marker to be seen by inflate from the input stream.
The right fix for this loop is likely to be to increment the initial
avail_out by one (we allocate one extra byte to terminate it with NUL
anyway, so there is no risk to overrun the buffer), and break out if we
see that avail_out has become zero, in order to detect that the stream
wants to produce more than what we expect. After the loop, we have a
check that exactly tests this condition:
if ((st != Z_STREAM_END) || stream.total_out != size) {
free(buffer);
return NULL;
}
So here is a patch (without my previous botched attempts) to fix this
issue. The first hunk reverts the corresponding hunk from b3118bd, and
the second hunk is the same fix proposed earlier.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some types of corruption to a pack may confuse the deflate stream
which stores an object. In Andy's reported case a 36 byte region
of the pack was overwritten, leading to what appeared to be a valid
deflate stream that was trying to produce a result larger than our
allocated output buffer could accept.
Z_BUF_ERROR is returned from inflate() if either the input buffer
needs more input bytes, or the output buffer has run out of space.
Previously we only considered the former case, as it meant we needed
to move the stream's input buffer to the next window in the pack.
We now abort the loop if inflate() returns Z_BUF_ERROR without
consuming the entire input buffer it was given, or has filled
the entire output buffer but has not yet returned Z_STREAM_END.
Either state is a clear indicator that this loop is not working
as expected, and should not continue.
This problem cannot occur with loose objects as we open the entire
loose object as a single buffer and treat Z_BUF_ERROR as an error.
Reported-by: Andy Isaacson <adi@hexapodia.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cc/replace:
t6050: check pushing something based on a replaced commit
Documentation: add documentation for "git replace"
Add git-replace to .gitignore
builtin-replace: use "usage_msg_opt" to give better error messages
parse-options: add new function "usage_msg_opt"
builtin-replace: teach "git replace" to actually replace
Add new "git replace" command
environment: add global variable to disable replacement
mktag: call "check_sha1_signature" with the replacement sha1
replace_object: add a test case
object: call "check_sha1_signature" with the replacement sha1
sha1_file: add a "read_sha1_file_repl" function
replace_object: add mechanism to replace objects found in "refs/replace/"
refs: add a "for_each_replace_ref" function
* tr/die_errno:
Use die_errno() instead of die() when checking syscalls
Convert existing die(..., strerror(errno)) to die_errno()
die_errno(): double % in strerror() output just in case
Introduce die_errno() that appends strerror(errno) to die()
Change calls to die(..., strerror(errno)) to use the new die_errno().
In the process, also make slight style adjustments: at least state
_something_ about the function that failed (instead of just printing
the pathname), and put paths in single quotes.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shifting 'unsigned char' or 'unsigned short' left can result in sign
extension errors, since the C integer promotion rules means that the
unsigned char/short will get implicitly promoted to a signed 'int' due to
the shift (or due to other operations).
This normally doesn't matter, but if you shift things up sufficiently, it
will now set the sign bit in 'int', and a subsequent cast to a bigger type
(eg 'long' or 'unsigned long') will now sign-extend the value despite the
original expression being unsigned.
One example of this would be something like
unsigned long size;
unsigned char c;
size += c << 24;
where despite all the variables being unsigned, 'c << 24' ends up being a
signed entity, and will get sign-extended when then doing the addition in
an 'unsigned long' type.
Since git uses 'unsigned char' pointers extensively, we actually have this
bug in a couple of places.
I may have missed some, but this is the result of looking at
git grep '[^0-9 ][ ]*<<[ ][a-z]' -- '*.c' '*.h'
git grep '<<[ ]*24'
which catches at least the common byte cases (shifting variables by a
variable amount, and shifting by 24 bits).
I also grepped for just 'unsigned char' variables in general, and
converted the ones that most obviously ended up getting implicitly cast
immediately anyway (eg hash_name(), encode_85()).
In addition to just avoiding 'unsigned char', this patch also tries to use
a common idiom for the delta header size thing. We had three different
variations on it: "& 0x7fUL" in one place (getting the sign extension
right), and "& ~0x80" and "& 0x7f" in two other places (not getting it
right). Apart from making them all just avoid using "unsigned char" at
all, I also unified them to then use a simple "& 0x7f".
I considered making a sparse extension which warns about doing implicit
casts from unsigned types to signed types, but it gets rather complex very
quickly, so this is just a hack.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new function will replace "read_sha1_file". This latter function
becoming just a stub to call the former will a NULL "replacement"
argument.
This new function is needed because sometimes we need to use the
replacement sha1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code implementing this mechanism has been copied more-or-less
from the commit graft code.
This mechanism is used in "read_sha1_file". sha1 passed to this
function that match a ref name in "refs/replace/" are replaced by
the sha1 that has been read in the ref.
We "die" if the replacement recursion depth is too high or if we
can't read the replacement object.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ar/unlink-err:
print unlink(2) errno in copy_or_link_directory
replace direct calls to unlink(2) with unlink_or_warn
Introduce an unlink(2) wrapper which gives warning if unlink failed
* maint:
grep: fix word-regexp colouring
completion: use git rev-parse to detect bare repos
Cope better with a _lot_ of packs
for-each-ref: fix segfault in copy_email
You might end up with a situation where you have tons of pack files, e.g.
when using hg2git. In this situation, all kinds of operations may
end up with a "too many files open" error. Let's recover gracefully from
that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Looks-right-to-me-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ar/unlink-err:
print unlink(2) errno in copy_or_link_directory
replace direct calls to unlink(2) with unlink_or_warn
Introduce an unlink(2) wrapper which gives warning if unlink failed
Essentially; s/type* /type */ as per the coding guidelines.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This helps to notice when something's going wrong, especially on
systems which lock open files.
I used the following criteria when selecting the code for replacement:
- it was already printing a warning for the unlink failures
- it is in a function which already printing something or is
called from such a function
- it is in a static function, returning void and the function is only
called from a builtin main function (cmd_)
- it is in a function which handles emergency exit (signal handlers)
- it is in a function which is obvously cleaning up the lockfiles
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"Unreliable hardlinks" is a misleading description for what is happening.
So rename it to something less misleading.
Suggested by Linus Torvalds.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It seems that accessing NTFS partitions with ufsd (at least on my EeePC)
has an unnerving bug: if you link() a file and unlink() it right away,
the target of the link() will have the correct size, but consist of NULs.
It seems as if the calls are simply not serialized correctly, as single-stepping
through the function move_temp_to_file() works flawlessly.
As ufsd is "Commertial software" (sic!), I cannot fix it, and have to work
around it in Git.
At the same time, it seems that this fixes msysGit issues 222 and 229 to
assume that Windows cannot handle link() && unlink().
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/shared-literally:
t1301: loosen test for forced modes
set_shared_perm(): sometimes we know what the final mode bits should look like
move_temp_to_file(): do not forget to chmod() in "Coda hack" codepath
Move chmod(foo, 0444) into move_temp_to_file()
"core.sharedrepository = 0mode" should set, not loosen
* jc/maint-1.6.0-keep-pack:
pack-objects: don't loosen objects available in alternate or kept packs
t7700: demonstrate repack flaw which may loosen objects unnecessarily
Remove --kept-pack-only option and associated infrastructure
pack-objects: only repack or loosen objects residing in "local" packs
git-repack.sh: don't use --kept-pack-only option to pack-objects
t7700-repack: add two new tests demonstrating repacking flaws
Conflicts:
t/t7700-repack.sh
adjust_shared_perm() first obtains the mode bits from lstat(2), expecting
to find what the result of applying user's umask is, and then tweaks it
as necessary. When the file to be adjusted is created with mkstemp(3),
however, the mode thusly obtained does not have anything to do with user's
umask, and we would need to start from 0444 in such a case and there is no
point running lstat(2) for such a path.
This introduces a new API set_shared_perm() to bypass the lstat(2) and
instead force setting the mode bits to the desired value directly.
adjust_shared_perm() becomes a thin wrapper to the function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now move_temp_to_file() is responsible for doing everything that is
necessary to turn a tempfile in $GIT_DIR into its final form, it must make
sure "Coda hack" codepath correctly makes the file read-only.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing out a loose object or a pack (index), move_temp_to_file() is
called to finalize the resulting file. These files (loose files and packs)
should all have permission mode 0444 (modulo adjust_shared_perm()).
Therefore, instead of doing chmod(foo, 0444) explicitly from each callsite
(or even forgetting to chmod() at all), do the chmod() call from within
move_temp_to_file().
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes the behaviour of octal notation to how it is defined in the
documentation, while keeping the traditional "loosen only" semantics
intact for "group" and "everybody".
Three main points of this patch are:
- For an explicit octal notation, the internal shared_repository variable
is set to a negative value, so that we can tell "group" (which is to
"OR" in 0660) and 0660 (which is to "SET" to 0660);
- git-init did not set shared_repository variable early enough to affect
the initial creation of many files, notably copied templates and the
configuration. We set it very early when a command-line option
specifies a custom value.
- Many codepaths create files inside $GIT_DIR by various ways that all
involve mkstemp(), and then call move_temp_to_file() to rename it to
its final destination. We can add adjust_shared_perm() call here; for
the traditional "loosen-only", this would be a no-op for many codepaths
because the mode is already loose enough, but with the new behaviour it
makes a difference.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Increase the size of the die/warning buffer to avoid truncation
close_sha1_file(): make it easier to diagnose errors
avoid possible overflow in delta size filtering computation
A bug report with "unable to write sha1 file" made us realize that we do
not have enough information to guess why close() is failing.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option to pack-objects/rev-list was created to improve the -A and -a
options of repack. It was found to be lacking in that it did not provide
the ability to differentiate between local and non-local kept packs, and
found to be unnecessary since objects residing in local kept packs can be
filtered out by the --honor-pack-keep option.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-1.6.0-keep-pack:
is_kept_pack(): final clean-up
Simplify is_kept_pack()
Consolidate ignore_packed logic more
has_sha1_kept_pack(): take "struct rev_info"
has_sha1_pack(): refactor "pretend these packs do not exist" interface
git-repack: resist stray environment variable
Now is_kept_pack() is just a member lookup into a structure, we can write
it as such.
Also rewrite the sole caller of has_sha1_kept_pack() to switch on the
criteria the callee uses (namely, revs->kept_pack_only) between calling
has_sha1_kept_pack() and has_sha1_pack(), so that these two callees do not
have to take a pointer to struct rev_info as an argument.
This removes the header file dependency issue temporarily introduced by
the earlier commit, so we revert changes associated to that as well.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This removes --unpacked=<packfile> parameter from the revision parser, and
rewrites its use in git-repack to pass a single --kept-pack-only option
instead.
The new --kept-pack-only option means just that. When this option is
given, is_kept_pack() that used to say "not on the --unpacked=<packfile>
list" now says "the packfile has corresponding .keep file".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This refactors three loops that check if a given packfile is on the
ignore_packed list into a function is_kept_pack(). The function returns
false for a pack on the list, and true for a pack not on the list, because
this list is solely used by "git repack" to pass list of packfiles that do
not have corresponding .keep files, i.e. a packfile not on the list is
"kept".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Its "ignore_packed" parameter always comes from struct rev_info. This
patch makes the function take a pointer to the surrounding structure, so
that the refactoring in the next patch becomes easier to review.
There is an unfortunate header file dependency and the easiest workaround
is to temporarily move the function declaration from cache.h to
revision.h; this will be moved back to cache.h once the function loses
this "ignore_packed" parameter altogether in the later part of the
series.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the callers of this function except only one pass NULL to its last
parameter, ignore_packed.
Introduce has_sha1_kept_pack() function that has the function signature
and the semantics of this function, and convert the sole caller that does
not pass NULL to call this new function.
All other callers and has_sha1_pack() lose the ignore_packed parameter.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Prepare for 1.6.1.4.
Make repack less likely to corrupt repository
fast-export: ensure we traverse commits in topological order
Clear the delta base cache if a pack is rebuilt
Conflicts:
RelNotes
* maint-1.6.0:
Make repack less likely to corrupt repository
fast-export: ensure we traverse commits in topological order
Clear the delta base cache if a pack is rebuilt
There is some risk that re-opening a regenerated pack file with
different offsets could leave stale entries within the delta base
cache that could be matched up against other objects using the same
"struct packed_git*" and pack offset.
Throwing away the entire delta base cache in this case is safer,
as we don't have to worry about a recycled "struct packed_git*"
matching to the wrong base object, resulting in delta apply
errors while unpacking an object.
Suggested-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise we may reuse the same memory address for a totally
different "struct packed_git", and a previously cached object from
the prior occupant might be returned when trying to unpack an object
from the new pack.
Found-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The size of the content we are adding may be larger than
2.1G (i.e., "git add gigantic-file"). Most of the code-path
to do so uses size_t or unsigned long to record the size,
but write_loose_object uses a signed int.
On platforms where "int" is 32-bits (which includes x86_64
Linux platforms), we end up passing malloc a negative size.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is only used from "sha1_file.c".
And as we want to add a "replace_object" hook in "read_sha1_file",
we must not let people bypass the hook using something other than
"read_sha1_file".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
R. Tyler Ballance reported a mysterious transient repository corruption;
after much digging, it turns out that we were not catching and reporting
memory allocation errors from some calls we make to zlib.
This one _just_ wraps things; it doesn't do the "retry on low memory
error" part, at least not yet. It is an independent issue from the
reporting. Some of the errors are expected and passed back to the caller,
but we die when zlib reports it failed to allocate memory for now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes us able to properly index symlinks even on filesystems where
st_size doesn't match the true size of the link.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Especially on Windows where an opened file cannot be replaced, make
sure pack-objects always close packs it is about to replace. Even on
non Windows systems, this could save potential bad results if ever
objects were to be read from the new pack file using offset from the old
index.
This should fix t5303 on Windows.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Tested-by: Johannes Sixt <j6t@kdbg.org> (MinGW)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bc/maint-keep-pack:
repack: only unpack-unreachable if we are deleting redundant packs
t7700: test that 'repack -a' packs alternate packed objects
pack-objects: extend --local to mean ignore non-local loose objects too
sha1_file.c: split has_loose_object() into local and non-local counterparts
t7700: demonstrate mishandling of loose objects in an alternate ODB
builtin-gc.c: use new pack_keep bitfield to detect .keep file existence
repack: do not fall back to incremental repacking with [-a|-A]
repack: don't repack local objects in packs with .keep file
pack-objects: new option --honor-pack-keep
packed_git: convert pack_local flag into a bitfield and add pack_keep
t7700: demonstrate mishandling of objects in packs with a .keep file
* maint:
sha1_file.c: resolve confusion EACCES vs EPERM
sha1_file: avoid bogus "file exists" error message
git checkout: don't warn about unborn branch if -f is already passed
bash: offer refs instead of filenames for 'git revert'
bash: remove dashed command leftovers
git-p4: fix keyword-expansion regex
fast-export: use an unsorted string list for extra_refs
Add new testcase to show fast-export does not always exports all tags
An earlier commit 916d081 (Nicer error messages in case saving an object
to db goes wrong, 2006-11-09) confused EACCES with EPERM, the latter of
which is an unlikely error from mkstemp().
Signed-off-by: Sam Vilain <sam@vilain.net>
This avoids the following misleading error message:
error: unable to create temporary sha1 filename ./objects/15: File exists
mkstemp can fail for many reasons, one of which, ENOENT, can occur if
the directory for the temp file doesn't exist. create_tmpfile tried to
handle this case by always trying to mkdir the directory, even if it
already existed. This caused errno to be clobbered, so one cannot tell
why mkstemp really failed, and it truncated the buffer to just the
directory name, resulting in the strange error message shown above.
Note that in both occasions that I've seen this failure, it has not been
due to a missing directory, or bad permissions, but some other, unknown
mkstemp failure mode that did not occur when I ran git again. This code
could perhaps be made more robust by retrying mkstemp, in case it was a
transient failure.
Signed-off-by: Joey Hess <joey@kitenet.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This avoids the following misleading error message:
error: unable to create temporary sha1 filename ./objects/15: File exists
mkstemp can fail for many reasons, one of which, ENOENT, can occur if
the directory for the temp file doesn't exist. create_tmpfile tried to
handle this case by always trying to mkdir the directory, even if it
already existed. This caused errno to be clobbered, so one cannot tell
why mkstemp really failed, and it truncated the buffer to just the
directory name, resulting in the strange error message shown above.
Note that in both occasions that I've seen this failure, it has not been
due to a missing directory, or bad permissions, but some other, unknown
mkstemp failure mode that did not occur when I ran git again. This code
could perhaps be made more robust by retrying mkstemp, in case it was a
transient failure.
Signed-off-by: Joey Hess <joey@kitenet.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the case of bad packed object CRC, unuse_pack wasn't called after
check_pack_crc which calls use_pack.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* np/pack-safer:
t5303: fix printf format string for portability
t5303: work around printf breakage in dash
pack-objects: don't leak pack window reference when splitting packs
extend test coverage for latest pack corruption resilience improvements
pack-objects: allow "fixing" a corrupted pack without a full repack
make find_pack_revindex() aware of the nasty world
make check_object() resilient to pack corruptions
make packed_object_info() resilient to pack corruptions
make unpack_object_header() non fatal
better validation on delta base object offsets
close another possibility for propagating pack corruption
* bc/maint-keep-pack:
t7700: test that 'repack -a' packs alternate packed objects
pack-objects: extend --local to mean ignore non-local loose objects too
sha1_file.c: split has_loose_object() into local and non-local counterparts
t7700: demonstrate mishandling of loose objects in an alternate ODB
builtin-gc.c: use new pack_keep bitfield to detect .keep file existence
repack: do not fall back to incremental repacking with [-a|-A]
repack: don't repack local objects in packs with .keep file
pack-objects: new option --honor-pack-keep
packed_git: convert pack_local flag into a bitfield and add pack_keep
t7700: demonstrate mishandling of objects in packs with a .keep file
This can potentially be used in a few places, so let's make
it available to all parts of the code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
pack_keep will be set when a pack file has an associated .keep file.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It currently calls die() whenever given offset is not found thinking
that such thing should never happen. But this offset may come from a
corrupted pack whych _could_ happen and not be found. Callers should
deal with this possibility gracefully instead.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the same spirit as commit 8eca0b47ff, let's try to survive a pack
corruption by making packed_object_info() able to fall back to alternate
packs or loose objects.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is possible to have pack corruption in the object header. Currently
unpack_object_header() simply die() on them instead of letting the caller
deal with that gracefully.
So let's have unpack_object_header() return an error instead, and find
a better name for unpack_object_header_gently() in that context. All
callers of unpack_object_header() are ready for it.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In one case, it was possible to have a bad offset equal to 0 effectively
pointing a delta onto itself and crashing git after too many recursions.
In the other cases, a negative offset could result due to off_t being
signed. Catch those.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Abstract
--------
With index v2 we have a per object CRC to allow quick and safe reuse of
pack data when repacking. This, however, doesn't currently prevent a
stealth corruption from being propagated into a new pack when _not_
reusing pack data as demonstrated by the modification to t5302 included
here.
The Context
-----------
The Git database is all checksummed with SHA1 hashes. Any kind of
corruption can be confirmed by verifying this per object hash against
corresponding data. However this can be costly to perform systematically
and therefore this check is often not performed at run time when
accessing the object database.
First, the loose object format is entirely compressed with zlib which
already provide a CRC verification of its own when inflating data. Any
disk corruption would be caught already in this case.
Then, packed objects are also compressed with zlib but only for their
actual payload. The object headers and delta base references are not
deflated for obvious performance reasons, however this leave them
vulnerable to potentially undetected disk corruptions. Object types
are often validated against the expected type when they're requested,
and deflated size must always match the size recorded in the object header,
so those cases are pretty much covered as well.
Where corruptions could go unnoticed is in the delta base reference.
Of course, in the OBJ_REF_DELTA case, the odds for a SHA1 reference to
get corrupted so it actually matches the SHA1 of another object with the
same size (the delta header stores the expected size of the base object
to apply against) are virtually zero. In the OBJ_OFS_DELTA case, the
reference is a pack offset which would have to match the start boundary
of a different base object but still with the same size, and although this
is relatively much more "probable" than in the OBJ_REF_DELTA case, the
probability is also about zero in absolute terms. Still, the possibility
exists as demonstrated in t5302 and is certainly greater than a SHA1
collision, especially in the OBJ_OFS_DELTA case which is now the default
when repacking.
Again, repacking by reusing existing pack data is OK since the per object
CRC provided by index v2 guards against any such corruptions. What t5302
failed to test is a full repack in such case.
The Solution
------------
As unlikely as this kind of stealth corruption can be in practice, it
certainly isn't acceptable to propagate it into a freshly created pack.
But, because this is so unlikely, we don't want to pay the run time cost
associated with extra validation checks all the time either. Furthermore,
consequences of such corruption in anything but repacking should be rather
visible, and even if it could be quite unpleasant, it still has far less
severe consequences than actively creating bad packs.
So the best compromize is to check packed object CRC when unpacking
objects, and only during the compression/writing phase of a repack, and
only when not streaming the result. The cost of this is minimal (less
than 1% CPU time), and visible only with a full repack.
Someone with a stats background could provide an objective evaluation of
this, but I suspect that it's bad RAM that has more potential for data
corruptions at this point, even in those cases where this extra check
is not performed. Still, it is best to prevent a known hole for
corruption when recreating object data into a new pack.
What about the streamed pack case? Well, any client receiving a pack
must always consider that pack as untrusty and perform full validation
anyway, hence no such stealth corruption could be propagated to remote
repositoryes already. It is therefore worthless doing local validation
in that case.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-co-track:
Enhance hold_lock_file_for_{update,append}() API
demonstrate breakage of detached checkout with symbolic link HEAD
Fix "checkout --track -b newbranch" on detached HEAD
* jc/maint-co-track:
Enhance hold_lock_file_for_{update,append}() API
demonstrate breakage of detached checkout with symbolic link HEAD
Fix "checkout --track -b newbranch" on detached HEAD
Conflicts:
builtin-commit.c
This changes the "die_on_error" boolean parameter to a mere "flags", and
changes the existing callers of hold_lock_file_for_update/append()
functions to pass LOCK_DIE_ON_ERROR.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Hopefully the final draft release notes update before 1.6.0.3
diff(1): clarify what "T"ypechange status means
contrib: update packinfo.pl to not use dashed commands
force_object_loose: Fix memory leak
tests: shell negation portability fix
read_packed_sha1 expectes its caller to free the buffer it returns, which
force_object_loose didn't do.
This leak is eventually triggered by "git gc", when it is manually invoked
or there are too many packs around, making gc totally unusable when there
are lots of unreachable objects.
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many call sites use strbuf_init(&foo, 0) to initialize local
strbuf variable "foo" which has not been accessed since its
declaration. These can be replaced with a static initialization
using the STRBUF_INIT macro which is just as readable, saves a
function call, and takes up fewer lines.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This patch just removes an unnecessary goto which makes the code easier
to read and shorter.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
On ARM I have the following compilation errors:
CC fast-import.o
In file included from cache.h:8,
from builtin.h:6,
from fast-import.c:142:
arm/sha1.h:14: error: conflicting types for 'SHA_CTX'
/usr/include/openssl/sha.h:105: error: previous declaration of 'SHA_CTX' was here
arm/sha1.h:16: error: conflicting types for 'SHA1_Init'
/usr/include/openssl/sha.h:115: error: previous declaration of 'SHA1_Init' was here
arm/sha1.h:17: error: conflicting types for 'SHA1_Update'
/usr/include/openssl/sha.h:116: error: previous declaration of 'SHA1_Update' was here
arm/sha1.h:18: error: conflicting types for 'SHA1_Final'
/usr/include/openssl/sha.h:117: error: previous declaration of 'SHA1_Final' was here
make: *** [fast-import.o] Error 1
This is because openssl header files are always included in
git-compat-util.h since commit 684ec6c63c whenever NO_OPENSSL is not
set, which somehow brings in <openssl/sha1.h> clashing with the custom
ARM version. Compilation of git is probably broken on PPC too for the
same reason.
Turns out that the only file requiring openssl/ssl.h and openssl/err.h
is imap-send.c. But only moving those problematic includes there
doesn't solve the issue as it also includes cache.h which brings in the
conflicting local SHA1 header file.
As suggested by Jeff King, the best solution is to rename our references
to SHA1 functions and structure to something git specific, and define those
according to the implementation used.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* jc/alternate-push:
push: receiver end advertises refs from alternate repositories
push: prepare sender to receive extended ref information from the receiver
receive-pack: make it a builtin
is_directory(): a generic helper function
* maint:
sha1_file: link() returns -1 on failure, not errno
Make git archive respect core.autocrlf when creating zip format archives
Add new test to demonstrate git archive core.autocrlf inconsistency
gitweb: avoid warnings for commits without body
Clarified gitattributes documentation regarding custom hunk header.
git-svn: fix handling of even funkier branch names
git-svn: Always create a new RA when calling do_switch for svn://
git-svn: factor out svnserve test code for later use
diff/diff-files: do not use --cc too aggressively
5723fe7 (Avoid cross-directory renames and linking on object creation,
2008-06-14) changed the call to use link() directly instead of through a
custom wrapper, but forgot that it returns 0 or -1, not 0 or errno.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, when pushing into a repository that borrows from alternate object
stores, we followed the longstanding design decision not to trust refs in
the alternate repository that houses the object store we are borrowing
from. If your public repository is borrowing from Linus's public
repository, you pushed into it long time ago, and now when you try to push
your updated history that is in sync with more recent history from Linus,
you will end up sending not just your own development, but also the
changes you acquired through Linus's tree, even though the objects needed
for the latter already exists at the receiving end. This is because the
receiving end does not advertise that the objects only reachable from the
borrowed repository (i.e. Linus's) are already available there.
This solves the issue by making the receiving end advertise refs from
borrowed repositories. They are not sent with their true names but with a
phoney name ".have" to make sure that the old senders will safely ignore
them (otherwise, the old senders will misbehave, trying to push matching
refs, and mirror push that deletes refs that only exist at the receiving
end).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A simple "grep -e stat --and -e S_ISDIR" revealed there are many
open-coded implementations of this function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to allow callers to pass "foo/bar/" to make sure both "foo" and
"foo/bar" exist and have good permissions, but this interface is too error
prone. If a caller mistakenly passes a path with trailing slashes
(perhaps it forgot to verify the user input) even when it wants to later
mkdir "bar" itself, it will find that it cannot mkdir "bar". If such a
caller does not bother to check the error for EEXIST, it may even
errorneously die().
Because we have no existing callers to use that obscure feature, this
patch removes it to avoid confusion.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is needed to fix verify-pack -v with multiple pack arguments.
Also, in theory, revindex data (if any) must be discarded whenever
reprepare_packed_git() is called. In practice this is hard to trigger
though.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* dp/hash-literally:
add --no-filters option to git hash-object
add --path option to git hash-object
use parse_options() in git hash-object
correct usage help string for git-hash-object
correct argument checking test for git hash-object
teach index_fd to work with pipes
When dealing with a repository with lots of loose objects, sha1_object_info
would rescan the packs directory every time an unpacked object was referenced
before finally giving up and looking for the loose object. This caused a lot
of extra unnecessary system calls during git pack-objects; the code was
rereading the entire pack directory once for each loose object file.
This patch looks for a loose object before falling back to rescanning the
pack directory, rather than the other way around.
Signed-off-by: Steven Grimm <koreth@midwinter.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
index_fd can now work with file descriptors that are not normal files
but any readable file. If the given file descriptor is a regular file
then mmap() is used; for other files, strbuf_read is used.
The path parameter, which has been used as hint for filters, can be
NULL now to indicate that the file should be hashed literally without
any filter.
The index_pipe function is removed as redundant.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since commit 8eca0b47ff, it is possible
for read_sha1_file() to return NULL even with existing objects when they
are corrupted. Previously a corrupted object would have terminated the
program immediately, effectively making read_sha1_file() return NULL
only when specified object is not found.
Let's restore this behavior for all users of read_sha1_file() and
provide a separate function with the ability to not terminate when
bad objects are encountered.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When recursing to unpack a delta base we must unuse_pack() so that
the pack window for the current object does not remain pinned in
memory while the delta base is itself being unpacked and materialized
for our use.
On a long delta chain of 50 objects we may need to access 6 different
windows from a very large (>3G) pack file in order to obtain all
of the delta base content. If the process ulimit permits us to
map/allocate only 1.5G we must release windows during this recursion
to ensure we stay within the ulimit and transition memory from pack
cache to standard malloc, or other mmap needs.
Inserting an unuse_pack() call prior to the recursion allows us to
avoid pinning the current window, making it available for garbage
collection if memory runs low.
This has been broken since at least before 1.5.1-rc1, and very
likely earlier than that. Its fixed now. :)
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When printing valuds of type uint32_t, we should use PRIu32, and should
not assume that it is unsigned int. On 32-bit platforms, it could be
defined as unsigned long. The same caution applies to ntohl().
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* j6t/mingw: (38 commits)
compat/pread.c: Add a forward declaration to fix a warning
Windows: Fix ntohl() related warnings about printf formatting
Windows: TMP and TEMP environment variables specify a temporary directory.
Windows: Make 'git help -a' work.
Windows: Work around an oddity when a pipe with no reader is written to.
Windows: Make the pager work.
When installing, be prepared that template_dir may be relative.
Windows: Use a relative default template_dir and ETC_GITCONFIG
Windows: Compute the fallback for exec_path from the program invocation.
Turn builtin_exec_path into a function.
Windows: Use a customized struct stat that also has the st_blocks member.
Windows: Add a custom implementation for utime().
Windows: Add a new lstat and fstat implementation based on Win32 API.
Windows: Implement a custom spawnve().
Windows: Implement wrappers for gethostbyname(), socket(), and connect().
Windows: Work around incompatible sort and find.
Windows: Implement asynchronous functions as threads.
Windows: Disambiguate DOS style paths from SSH URLs.
Windows: A rudimentary poll() emulation.
Windows: Implement start_command().
...
* lt/config-fsync:
Add config option to enable 'fsync()' of object files
Split up default "i18n" and "branch" config parsing into helper routines
Split up default "user" config parsing into helper routine
Split up default "core" config parsing into helper routine
The shell version used to use "mkdir -p" to create the repo
path, but the C version just calls "mkdir". Let's replicate
the old behavior. We have to create the git and worktree
leading dirs separately; while most of the time, the
worktree dir contains the git dir (as .git), the user can
override this using GIT_WORK_TREE.
We can reuse safe_create_leading_directories, but we need to
make a copy of our const buffer to do so. Since
merge-recursive uses the same pattern, we can factor this
out into a global function. This has two other cleanup
advantages for merge-recursive:
1. mkdir_p wasn't a very good name. "mkdir -p foo/bar" actually
creates bar, but this function just creates the leading
directories.
2. mkdir_p took a mode argument, but it was completely
ignored.
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using find_pack_entry_one() to get object offsets is rather suboptimal
when nth_packed_object_offset() can be used directly.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The shell version used to use "mkdir -p" to create the repo
path, but the C version just calls "mkdir". Let's replicate
the old behavior. We have to create the git and worktree
leading dirs separately; while most of the time, the
worktree dir contains the git dir (as .git), the user can
override this using GIT_WORK_TREE.
We can reuse safe_create_leading_directories, but we need to
make a copy of our const buffer to do so. Since
merge-recursive uses the same pattern, we can factor this
out into a global function. This has two other cleanup
advantages for merge-recursive:
1. mkdir_p wasn't a very good name. "mkdir -p foo/bar" actually
creates bar, but this function just creates the leading
directories.
2. mkdir_p took a mode argument, but it was completely
ignored.
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
New pack structures are currently allocated in 2 different places
and all members have to be initialized explicitly. This is prone
to errors leading to segmentation faults as found by Teemu Likonen.
Let's have a common place where this structure is allocated, and have
all members explicitly initialized to zero.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We should be able to fall back to loose objects or alternative packs when
a pack becomes corrupted. This is especially true when an object exists
in one pack only as a delta but its base object is corrupted. Currently
there is no way to retrieve the former object even if the later is
available in another pack or loose.
This patch allows for a delta to be resolved (with a performance cost)
using a base object from a source other than the pack where that delta
is located. Same thing for non-delta objects: rather than failing
outright, a search is made in other packs or used loose when the
currently active pack has it but corrupted.
Of course git will become extremely noisy with error messages when that
happens. However, if the operation succeeds nevertheless, a simple
'git repack -a -f -d' will "fix" the corrupted repository given that all
corrupted objects have a good duplicate somewhere in the object store,
possibly manually copied from another source.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The AIX mkstemp will modify it's template parameter to an empty string if
the call fails. This caused a subsequent mkdir to fail.
Signed-off-by: Patrick Higgins <patrick.higgins@cexp.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In this function we must be careful to handle drive-local paths else there
is a danger that it runs into an infinite loop.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
As explained in the documentation[*] this is totally useless on
filesystems that do ordered/journalled data writes, but it can be a
useful safety feature on filesystems like HFS+ that only journal the
metadata, not the actual file contents.
It defaults to off, although we could presumably in theory some day
auto-enable it on a per-filesystem basis.
[*] Yes, I updated the docs for the thing. Hell really _has_ frozen
over, and the four horsemen are probably just beyond the horizon.
EVERYBODY PANIC!
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was implemented as a thin wrapper around an otherwise unused
helper function parse_pack_index_file(). The code becomes simpler
and easier to read by consolidating the two.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a shared repository, we should make sure adjust_shared_perm() is called
after creating the initial fan-out directories under objects/ directory.
Earlier an logico called the function only when mkdir() failed; we should
do so when mkdir() succeeded.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before even calling this, all callers have done a "has_sha1_file(sha1)"
or "has_loose_object(sha1)" check, so there is no point in doing a
second check.
If something races with us on object creation, we handle that in the
final link() that moves it to the right place.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we've made the loose SHA1 file reading more careful and
streamlined, we only use the old find_sha1_file() function for checking
whether a loose object file exists at all.
As such, the whole 'return stat information' part of it was just
pointless (nobody cares any more), and the naming of the function is not
really all that relevant either.
So simplify it to not do a 'stat()', but just an existence check (which
is what the callers want), and rename it to 'has_loose_object()' which
matches the use.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to do 'stat()+open()+mmap()+close()' to read the loose object
file data, which does work fine, but has a couple of problems:
- it unnecessarily walks the filename twice (at 'stat()' time and then
again to open it)
- NFS generally has open-close consistency guarantees, which means that
the initial 'stat()' was technically done outside of the normal
consistency rules.
So change it to do 'open()+fstat()+mmap()+close()' instead, which avoids
both these issues.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of creating new temporary objects in the top-level git object
directory, create them in the same directory they will finally end up in
anyway. This avoids making the final atomic "rename to stable name"
operation be a cross-directory event, which makes it a lot easier for
various filesystems.
Several filesystems do things like change the inode number when moving
files across directories (or refuse to do it entirely).
In particular, it can also cause problems for NFS implementations that
change the filehandle of a file when it moves to a different directory,
like the old user-space NFS server did, and like the Linux knfsd still
does if you don't export your filesystems with 'no_subtree_check' or if
you export a filesystem that doesn't have stable inode numbers across
renames).
This change also obviously implies creating the object fan-out
subdirectory at tempfile creation time, rather than at the final
move_temp_to_file() time. Which actually accounts for most of the size
of the patch.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
write_sha1_from_fd() and write_sha1_to_fd() were dead code nobody called,
neither the latter's helper repack_object() was.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This consolidates the common operations for closing the new temporary file
that we have written, before we move it into place with the final name.
There's some common code there (make it read-only and check for errors on
close), but more importantly, this also gives a single place to add an
fsync_or_die() call if we want to add a safe mode.
This was triggered due to Denis Bueno apparently twice being able to
corrupt his git repository on OS X due to an unlucky combination of kernel
crashes and a not-very-robust filesystem.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier commit 633f43e (Remove redundant code, eliminate one static
variable, 2008-05-24) had a thinko (perhaps an eyeno) that broke
sha1_pack_index_name() function. One symptom of this was that the http
walker is now completely broken.
This should fix it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* db/clone-in-c:
Add test for cloning with "--reference" repo being a subset of source repo
Add a test for another combination of --reference
Test that --reference actually suppresses fetching referenced objects
clone: fall back to copying if hardlinking fails
builtin-clone.c: Need to closedir() in copy_or_link_directory()
builtin-clone: fix initial checkout
Build in clone
Provide API access to init_db()
Add a function to set a non-default work tree
Allow for having for_each_ref() list extra refs
Have a constant extern refspec for "--tags"
Add a library function to add an alternate to the alternates file
Add a lockfile function to append to a file
Mark the list of refs to fetch as const
Conflicts:
cache.h
t/t5700-clone-reference.sh
This is meant to force the creation of a loose object even if it
already exists packed. Needed for the next commit.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is in the core so that, if the alternates file has already been
read, the addition can be parsed and put into effect for the current
process.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, when looking for a packed object from the pack idx, a
simple binary search is used.
A conventional binary search loop looks like this:
unsigned lo, hi;
do {
unsigned mi = (lo + hi) / 2;
int cmp = "entry pointed at by mi" minus "target";
if (!cmp)
return mi; "mi is the wanted one"
if (cmp > 0)
hi = mi; "mi is larger than target"
else
lo = mi+1; "mi is smaller than target"
} while (lo < hi);
"did not find what we wanted"
The invariants are:
- When entering the loop, 'lo' points at a slot that is never
above the target (it could be at the target), 'hi' points at
a slot that is guaranteed to be above the target (it can
never be at the target).
- We find a point 'mi' between 'lo' and 'hi' ('mi' could be
the same as 'lo', but never can be as high as 'hi'), and
check if 'mi' hits the target. There are three cases:
- if it is a hit, we have found what we are looking for;
- if it is strictly higher than the target, we set it to
'hi', and repeat the search.
- if it is strictly lower than the target, we update 'lo'
to one slot after it, because we allow 'lo' to be at the
target and 'mi' is known to be below the target.
If the loop exits, there is no matching entry.
When choosing 'mi', we do not have to take the "middle" but
anywhere in between 'lo' and 'hi', as long as lo <= mi < hi is
satisfied. When we somehow know that the distance between the
target and 'lo' is much shorter than the target and 'hi', we
could pick 'mi' that is much closer to 'lo' than (hi+lo)/2,
which a conventional binary search would pick.
This patch takes advantage of the fact that the SHA-1 is a good
hash function, and as long as there are enough entries in the
table, we can expect uniform distribution. An entry that begins
with for example "deadbeef..." is much likely to appear much
later than in the midway of a reasonably populated table. In
fact, it can be expected to be near 87% (222/256) from the top
of the table.
This is a work-in-progress and has switches to allow easier
experiments and debugging. Exporting GIT_USE_LOOKUP environment
variable enables this code.
On my admittedly memory starved machine, with a partial KDE
repository (3.0G pack with 95M idx):
$ GIT_USE_LOOKUP=t git log -800 --stat HEAD >/dev/null
3.93user 0.16system 0:04.09elapsed 100%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+55588minor)pagefaults 0swaps
Without the patch, the numbers are:
$ git log -800 --stat HEAD >/dev/null
4.00user 0.15system 0:04.17elapsed 99%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+60258minor)pagefaults 0swaps
In the same repository:
$ GIT_USE_LOOKUP=t git log -2000 HEAD >/dev/null
0.12user 0.00system 0:00.12elapsed 97%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+4241minor)pagefaults 0swaps
Without the patch, the numbers are:
$ git log -2000 HEAD >/dev/null
0.05user 0.01system 0:00.07elapsed 100%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+8506minor)pagefaults 0swaps
There isn't much time difference, but the number of minor faults
seems to show that we are touching much smaller number of pages,
which is expected.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since commit eb32d236df, there was a TODO
comment in packed_object_info_detail() about the SHA1 of base object to
OBJ_OFS_DELTA objects. So here it is at last.
While at it, providing the actual storage size information as well is now
trivial.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mk/maint-parse-careful:
peel_onion: handle NULL
check return value from parse_commit() in various functions
parse_commit: don't fail, if object is NULL
revision.c: handle tag->tagged == NULL
reachable.c::process_tree/blob: check for NULL
process_tag: handle tag->tagged == NULL
check results of parse_commit in merge_bases
list-objects.c::process_tree/blob: check for NULL
reachable.c::add_one_tree: handle NULL from lookup_tree
mark_blob/tree_uninteresting: check for NULL
get_sha1_oneline: check return value of parse_object
read_object_with_reference: don't read beyond the buffer
Now any commands may reference the empty tree object by its
sha1 (4b825dc642). This is
useful for showing some diffs, especially for initial
commits.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
CRLF conversion bears a slight chance of corrupting data.
autocrlf=true will convert CRLF to LF during commit and LF to
CRLF during checkout. A file that contains a mixture of LF and
CRLF before the commit cannot be recreated by git. For text
files this is the right thing to do: it corrects line endings
such that we have only LF line endings in the repository.
But for binary files that are accidentally classified as text the
conversion can corrupt data.
If you recognize such corruption early you can easily fix it by
setting the conversion type explicitly in .gitattributes. Right
after committing you still have the original file in your work
tree and this file is not yet corrupted. You can explicitly tell
git that this file is binary and git will handle the file
appropriately.
Unfortunately, the desired effect of cleaning up text files with
mixed line endings and the undesired effect of corrupting binary
files cannot be distinguished. In both cases CRLFs are removed
in an irreversible way. For text files this is the right thing
to do because CRLFs are line endings, while for binary files
converting CRLFs corrupts data.
This patch adds a mechanism that can either warn the user about
an irreversible conversion or can even refuse to convert. The
mechanism is controlled by the variable core.safecrlf, with the
following values:
- false: disable safecrlf mechanism
- warn: warn about irreversible conversions
- true: refuse irreversible conversions
The default is to warn. Users are only affected by this default
if core.autocrlf is set. But the current default of git is to
leave core.autocrlf unset, so users will not see warnings unless
they deliberately chose to activate the autocrlf mechanism.
The safecrlf mechanism's details depend on the git command. The
general principles when safecrlf is active (not false) are:
- we warn/error out if files in the work tree can modified in an
irreversible way without giving the user a chance to backup the
original file.
- for read-only operations that do not modify files in the work tree
we do not not print annoying warnings.
There are exceptions. Even though...
- "git add" itself does not touch the files in the work tree, the
next checkout would, so the safety triggers;
- "git apply" to update a text file with a patch does touch the files
in the work tree, but the operation is about text files and CRLF
conversion is about fixing the line ending inconsistencies, so the
safety does not trigger;
- "git diff" itself does not touch the files in the work tree, it is
often run to inspect the changes you intend to next "git add". To
catch potential problems early, safety triggers.
The concept of a safety check was originally proposed in a similar
way by Linus Torvalds. Thanks to Dimitry Potapov for insisting
on getting the naked LF/autocrlf=true case right.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
fast-import was relying on the fact that on most systems mmap() and
write() are synchronized by the filesystem's buffer cache. We were
relying on the ability to mmap() 20 bytes beyond the current end
of the file, then later fill in those bytes with a future write()
call, then read them through the previously obtained mmap() address.
This isn't always true with some implementations of NFS, but it is
especially not true with our NO_MMAP=YesPlease build time option used
on some platforms. If fast-import was built with NO_MMAP=YesPlease
we used the malloc()+pread() emulation and the subsequent write()
call does not update the trailing 20 bytes of a previously obtained
"mmap()" (aka malloc'd) address.
Under NO_MMAP that behavior causes unpack_entry() in sha1_file.c to
be unable to read an object header (or data) that has been unlucky
enough to be written to the packfile at a location such that it
is in the trailing 20 bytes of a window previously opened on that
same packfile.
This bug has gone unnoticed for a very long time as it is highly data
dependent. Not only does the object have to be placed at the right
position, but it also needs to be positioned behind some other object
that has been accessed due to a branch cache invalidation. In other
words the stars had to align just right, and if you did run into
this bug you probably should also have purchased a lottery ticket.
Fortunately the workaround is a lot easier than the bug explanation.
Before we allow unpack_entry() to read data from a pack window
that has also (possibly) been modified through write() we force
all existing windows on that packfile to be closed. By closing
the windows we ensure that any new access via the emulated mmap()
will reread the packfile, updating to the current file content.
This comes at a slight performance degredation as we cannot reuse
previously cached windows when we update the packfile. But it
is a fairly minor difference as the window closes happen at only
two points:
- When the packfile is finalized and its .idx is generated:
At this stage we are getting ready to update the refs and any
data access into the packfile is going to be random, and is
going after only the branch tips (to ensure they are valid).
Our existing windows (if any) are not likely to be positioned
at useful locations to access those final tip commits so we
probably were closing them before anyway.
- When the branch cache missed and we need to reload:
At this point fast-import is getting change commands for the next
commit and it needs to go re-read a tree object it previously
had written out to the packfile. What windows we had (if any)
are not likely to cover the tree in question so we probably were
closing them before anyway.
We do try to avoid unnecessarily closing windows in the second case
by checking to see if the packfile size has increased since the
last time we called unpack_entry() on that packfile. If the size
has not changed then we have not written additional data, and any
existing window is still vaild. This nicely handles the cases where
fast-import is going through a branch cache reload and needs to read
many trees at once. During such an event we are not likely to be
updating the packfile so we do not cycle the windows between reads.
With this change in place t9301-fast-export.sh (which was broken
by c3b0dec509) finally works again.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old way of fixing warnings did not succeed on MinGW. MinGW
does not support C99 printf format strings for size_t [1]. But
gcc on MinGW issues warnings if C99 printf format is not used.
Hence, the old stragegy to avoid warnings fails.
[1] http://www.mingw.org/MinGWiki/index.php/C99
This commits passes arguments of type size_t through a tiny
helper functions that casts to the type expected by the format
string.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are some places that test for an absolute path. Use the helper
function to ease porting.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
RelNotes-1.5.3.5: describe recent fixes
merge-recursive.c: mrtree in merge() is not used before set
sha1_file.c: avoid gcc signed overflow warnings
Fix a small memory leak in builtin-add
honor the http.sslVerify option in shell scripts
With the recent gcc, we get:
sha1_file.c: In check_packed_git_:
sha1_file.c:527: warning: assuming signed overflow does not
occur when assuming that (X + c) < X is always false
sha1_file.c:527: warning: assuming signed overflow does not
occur when assuming that (X + c) < X is always false
for a piece of code that tries to make sure that off_t is large
enough to hold more than 2^32 offset. The test tried to make
sure these do not wrap-around:
/* make sure we can deal with large pack offsets */
off_t x = 0x7fffffffUL, y = 0xffffffffUL;
if (x > (x + 1) || y > (y + 1)) {
but gcc assumes it can do whatever optimization it wants for a
signed overflow (undefined behaviour) and warns about this
construct.
Follow Linus's suggestion to check sizeof(off_t) instead to work
around the problem.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ph/strbuf: (44 commits)
Make read_patch_file work on a strbuf.
strbuf_read_file enhancement, and use it.
strbuf change: be sure ->buf is never ever NULL.
double free in builtin-update-index.c
Clean up stripspace a bit, use strbuf even more.
Add strbuf_read_file().
rerere: Fix use of an empty strbuf.buf
Small cache_tree_write refactor.
Make builtin-rerere use of strbuf nicer and more efficient.
Add strbuf_cmp.
strbuf_setlen(): do not barf on setting length of an empty buffer to 0
sq_quote_argv and add_to_string rework with strbuf's.
Full rework of quote_c_style and write_name_quoted.
Rework unquote_c_style to work on a strbuf.
strbuf API additions and enhancements.
nfv?asprintf are broken without va_copy, workaround them.
Fix the expansion pattern of the pseudo-static path buffer.
builtin-for-each-ref.c::copy_name() - do not overstep the buffer.
builtin-apply.c: fix a tiny leak introduced during xmemdupz() conversion.
Use xmemdupz() in many places.
...
For that purpose, the ->buf is always initialized with a char * buf living
in the strbuf module. It is made a char * so that we can sloppily accept
things that perform: sb->buf[0] = '\0', and because you can't pass "" as an
initializer for ->buf without making gcc unhappy for very good reasons.
strbuf_init/_detach/_grow have been fixed to trust ->alloc and not ->buf
anymore.
as a consequence strbuf_detach is _mandatory_ to detach a buffer, copying
->buf isn't an option anymore, if ->buf is going to escape from the scope,
and eventually be free'd.
API changes:
* strbuf_setlen now always works, so just make strbuf_reset a convenience
macro.
* strbuf_detatch takes a size_t* optional argument (meaning it can be
NULL) to copy the buffer's len, as it was needed for this refactor to
make the code more readable, and working like the callers.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Now, those functions take an "out" strbuf argument, where they store their
result if any. In that case, it also returns 1, else it returns 0.
* those functions support "in place" editing, in the sense that it's OK to
call them this way:
convert_to_git(path, sb->buf, sb->len, sb);
When doable, conversions are done in place for real, else the strbuf
content is just replaced with the new one, transparentely for the caller.
If you want to create a new filter working this way, being the accumulation
of filter1, filter2, ... filtern, then your meta_filter would be:
int meta_filter(..., const char *src, size_t len, struct strbuf *sb)
{
int ret = 0;
ret |= filter1(...., src, len, sb);
if (ret) {
src = sb->buf;
len = sb->len;
}
ret |= filter2(...., src, len, sb);
if (ret) {
src = sb->buf;
len = sb->len;
}
....
return ret | filtern(..., src, len, sb);
}
That's why subfilters the convert_to_* functions called were also rewritten
to work this way.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This brings builtin-stripspace, builtin-tag and mktag to use strbufs.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Under some types of packfile corruption the zlib stream holding the
data for a delta within a packfile may fail to inflate, due to say
a CRC failure within the compressed data itself. When this occurs
the unpack_compressed_entry function will return NULL as a signal to
the caller that the data is not available. Unfortunately we then
tried to use that NULL as though it referenced a memory location
where a delta was stored and tried to apply it to the delta base.
Loading a byte from the NULL address typically causes a SIGSEGV.
cate on #git noticed this failure in `git fsck --full` where the
call to verify_pack() first noticed that the packfile was corrupt
by finding that the packfile's SHA-1 did not match the raw data of
the file. After finding this fsck went ahead and tried to verify
every object within the packfile, even though the packfile was
already known to be bad. If we are going to shovel bad data at
the delta unpacking code, we better handle it correctly.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Print the index version when an error occurs so the user
knows what type of header (and size) we thought the index
should have had.
Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new name is closer to the purpose of the function.
A NUL-terminated buffer makes things easier when callers need that.
Since the function returns only the memory written with data,
almost always allocating more space than needed because final
size is unknown, an extra NUL terminating the buffer is harmless.
It is not included in the returned size, so the function
remains working as before.
Also, now the function allows the buffer passed to be NULL at first,
and alloc_nr is now used for growing the buffer, instead size=*2.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Document -<n> for git-format-patch
glossary: add 'reflog'
diff --no-index: fix --name-status with added files
Don't smash stack when $GIT_ALTERNATE_OBJECT_DIRECTORIES is too long
There is no restriction on the length of the name returned by
get_object_directory, other than the fact that it must be a stat'able
git object directory. That means its name may have length up to
PATH_MAX-1 (i.e., often 4095) not counting the trailing NUL.
Combine that with the assumption that the concatenation of that name and
suffixes like "/info/alternates" and "/pack/---long-name---.idx" will fit
in a buffer of length PATH_MAX, and you see the problem. Here's a fix:
sha1_file.c (prepare_packed_git_one): Lengthen "path" buffer
so we are guaranteed to be able to append "/pack/" without checking.
Skip any directory entry that is too long to be appended.
(read_info_alternates): Protect against a similar buffer overrun.
Before this change, using the following admittedly contrived environment
setting would cause many git commands to clobber their stack and segfault
on a system with PATH_MAX == 4096:
t=$(perl -e '$s=".git/objects";$n=(4096-6-length($s))/2;print "./"x$n . $s')
export GIT_ALTERNATE_OBJECT_DIRECTORIES=$t
touch g
./git-update-index --add g
If you run the above commands, you'll soon notice that many
git commands now segfault, so you'll want to do this:
unset GIT_ALTERNATE_OBJECT_DIRECTORIES
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
