If you are using autoconf and change the configure.ac, the
Makefile will notice that config.status is older than
configure.ac, and will attempt to rebuild and re-run the
configure script to pick up your changes. The first step in
doing so is to run "make configure". Unfortunately, this
tries to include config.mak.autogen, which depends on
config.status, which depends on configure.ac; so we must
rebuild config.status. Which leads to us running "make
configure", and so on.
It's easy to demonstrate with:
make configure
./configure
touch configure.ac
make
We can break this cycle by not re-invoking make to build
"configure", and instead just putting its rules inline into
our config.status rebuild procedure. We can avoid a copy by
factoring the rules into a make variable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ob/imap-send-ssl-verify:
imap-send: support subjectAltName as well
imap-send: the subject of SSL certificate must match the host
imap-send: move #ifdef around
Check not only the common name of the certificate subject, but also
check the subject alternative DNS names as well, when verifying that
the certificate matches that of the host we are trying to talk to.
Signed-off-by: Oswald Buddenhagen <ossi@kde.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We did not check a valid certificate's subject at all, and would
have happily talked with a wrong host after connecting to an
incorrect address and getting a valid certificate that does not
belong to the host we intended to talk to.
Signed-off-by: Oswald Buddenhagen <ossi@kde.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Html documents will be installed to root dir (/) no matter what prefix
is set, if run these commands before `make` and `make install-html`:
$ make configure
$ ./configure --prefix=<PREFIX>
After the installation, all the html documents will copy to rootdir (/),
and:
$ git --html-path
<PREFIX>
$ git help -w something
fatal: '<PREFIX>': not a documentation directory.
This is because the variable "htmldir" points to a undefined variable
"$(docdir)" in file "config.mak.autogen", which is generated by running
`./configure`. By default $(docdir) generated by configure is supposed
be set this way:
datarootdir='${prefix}/share'
htmldir='${docdir}'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
but since fc1c5415d6 (Honor configure's htmldir switch, 2013-02-02),
we only set and export htmldir without doing so for PACKAGE_TARNAME
(which is set to 'git' by the configure script).
Add the required two variables "PACKAGE_TARNAME" and "docdir" to file
"config.mak.in" will work this issue around.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually we do not pass an empty string to the function hash_name()
because we almost always ask for hash values for a path that is a
candidate to be added to the index. However, check-ignore (and most
likely check-attr, but I didn't check) apparently has a callchain
to ask the hash value for an empty path when it was given a "." from
the top-level directory to ask "Is the path . excluded by default?"
Make sure that hash_name() does not overrun the end of the given
pathname even when it is empty.
Remove a sweep-the-issue-under-the-rug conditional in check-ignore
that avoided to pass an empty string to the callchain while at it.
It is a valid question to ask for check-ignore if the top-level is
set to be ignored by default, even though the answer is most likely
no, if only because there is currently no way to specify such an
entry in the .gitignore file. But it is an unusual thing to ask and
it is not worth optimizing for it by special casing at the top level
of the call chain.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you try and update a submodule with a dirty working directory, you
get an error message like:
$ git submodule update
error: Your local changes to the following files would be overwritten by checkout:
...
Please, commit your changes or stash them before you can switch branches.
Aborting
...
Mention this in the submodule notes. The previous phrase was short
enough that I originally thought it might have been referring to the
reflog note (obviously, uncommitted changes will not show up in the
reflog either ;).
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Less work and more error checking (e.g. does a merge base exist?).
Add an explicit push before request-pull to satisfy request-pull,
which checks to make sure the references are publically available.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I think this interface is often more convenient than extended cherry
picking or using 'git format-patch'. In fact, I removed the
cherry-pick section entirely. The entry-level suggestions for
rerolling are now:
1. git commit --amend
2. git format-patch origin
git reset --hard origin
...edit and reorder patches...
git am *.patch
3. git rebase -i origin
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
test_expect_success_multi() helper function warrants some explanation,
since at first sight it may seem like generic test framework plumbing,
but is in fact specific to testing check-ignore, and allows more
thorough testing of the various output formats without significantly
increase the size of t0008.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of adding an early return to the inside of the
ssl_socket_connect() function for NO_OPENSSL compilation, split it
into a separate stub function.
No functional change, but the next change to extend ssl_socket_connect()
will become easier to read this way.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We stopped mentioning `tracking` is a deprecated but supported
synonym for `upstream` in pull.default even though we have no
intention of removing the support for it.
* jc/mention-tracking-for-pull-default:
doc: mention tracking for pull.default
Also migration path for the default behaviour of "git add -u/-A" run
in a subdirectory is worth mentioning.
Both pointed out by Matthieu Moy.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Minor clean up of if-then nesting in checks for environment variables
and config options. No functional changes.
Signed-off-by: Martin Erik Werner <martinerikwerner@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
user-manual: use -o latest.tar.gz to create a gzipped tarball
user-manual: use 'git config --global user.*' for setup
user-manual: mention 'git remote add' for remote branch config
user-manual: give 'git push -f' as an alternative to +master
user-manual: use 'remote add' to setup push URLs
This functionality was introduced by 0e804e09 (archive: provide
builtin .tar.gz filter, 2011-07-21) for v1.7.7.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A simple command line call is easier than spawning an editor,
especially for folks new to ideas like the "command line" and "text
editors". This is also the approach suggested by 'git commit' if you
try and commit without having configured user.name or user.email.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I hardly ever setup remote.<name>.url using 'git config'. While it
may be instructive to do so, we should also point out 'git remote
add'.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This mirrors existing language in the description of 'git fetch'.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no need to use here documents to setup this configuration.
It is easier, less confusing, and more robust to use `git remote add`
directly.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow the server side to redact the refs/ namespace it shows to the
client.
Will merge to 'master'.
* jc/hidden-refs:
upload/receive-pack: allow hiding ref hierarchies
upload-pack: simplify request validation
upload-pack: share more code
Add diff.algorithm configuration so that the user does not type
"diff --histogram".
* mp/diff-algo-config:
diff: Introduce --diff-algorithm command line option
config: Introduce diff.algorithm variable
git-completion.bash: Autocomplete --minimal and --histogram for git-diff
Allows skipping the untracked check GIT_PS1_SHOWUNTRACKEDFILES
asks for the git-prompt (in contrib/) per repository.
* mw/bash-prompt-show-untracked-config:
t9903: add extra tests for bash.showDirtyState
t9903: add tests for bash.showUntrackedFiles
shell prompt: add bash.showUntrackedFiles option
"git log --grep=<pattern>" used to look for the pattern in literal
bytes of the commit log message and ignored the log-output encoding.
* jk/read-commit-buffer-data-after-free:
log: re-encode commit messages before grepping
The old Git version where it appeared is now useful only to historians,
not to normal users. Also, the text was mentioning only the per-repo
config file, but this is a good place to teach that customization can
also be made per-user.
While at it, remove a now-defunct e-mail from an example.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"make COMPUTE_HEADER_DEPENDENCIES=no clean" would try to run "rm
-rf $(dep_dirs)" with an empty dep_dir, but some implementations of
"rm -rf" barf on an empty argument list.
* mk/make-rm-depdirs-could-be-empty:
Makefile: don't run "rm" without any files
The merge at 5bf72ed2 missed another instance of <filepattern> that
we were converting to <pathspec>.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
acd2a45 (Refuse updating the current branch in a non-bare repository
via push, 2009-02-11) changed the default to refuse such a push, but
it forgot to update the docs.
7d182f5 (Documentation: receive.denyCurrentBranch defaults to
'refuse', 2010-03-17) updated Documentation/config.txt, but forgot to
update the user manual.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactors a lot of repetitive code sequence from the graph drawing
code and adds it to the combined diff output.
* jk/diff-graph-cleanup:
combine-diff.c: teach combined diffs about line prefix
diff.c: use diff_line_prefix() where applicable
diff: add diff_line_prefix function
diff.c: make constant string arguments const
diff: write prefix to the correct file
graph: output padding for merge subsequent parents
