These codepaths attempt to compare the "expected" current value with
the actual current value, but did not check if we successfully read
the current value before comparison.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A test case introduced by ae454f61 (Add tests for wildcard "path vs ref"
disambiguation) allocates a file named '*.c'. This does not work on
Windows, because the OS forbids file names containing wildcard
characters. The test case fails where the shell attempts to allocate the
file. Skip the test on Windows.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A test case introduced by 91479b9c (t7300: add tests to document
behavior of clean and nested git) uses 'chmod 0' to verify that a
subdirectory that has an unreadable .git file is not removed. This can
work only when the system pays attention to the permissions set with
'chmod'. Therefore, set the POSIXPERM prerequisite on the test case.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we call "die(fmt, args...)", we end up in vreportf with
two pieces of information:
1. The prefix "fatal: "
2. The original fmt and va_list of args.
We format item (2) into a temporary buffer, and then fprintf
the prefix and the temporary buffer, along with a newline.
This has the unfortunate side effect of truncating any error
messages that are longer than 4096 bytes.
Instead, let's use separate calls for the prefix and
newline, letting us hand the item (2) directly to vfprintf.
This is essentially undoing d048a96 (print
warning/error/fatal messages in one shot, 2007-11-09), which
tried to have the whole output end up in a single `write`
call.
But we can address this instead by explicitly requesting
line-buffering for the output handle, and by making sure
that the buffer is empty before we start (so that outputting
the prefix does not cause a flush due to hitting the buffer
limit).
We may still break the output into two writes if the content
is larger than our buffer, but there's not much we can do
there; depending on the stdio implementation, that might
have happened even with a single fprintf call.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The vreportf function always goes to stderr, but run-command
wants child errors to go to the parent's original stderr. To
solve this, commit a5487dd duplicates the stderr fd and
installs die and error handlers to direct the output
appropriately (which later turned into the vwritef
function). This has two downsides, though:
- we make multiple calls to write(), which contradicts the
"write at once" logic from d048a96 (print
warning/error/fatal messages in one shot, 2007-11-09).
- the custom handlers basically duplicate the normal
handlers. They're only a few lines of code, but we
should not have to repeat the magic "exit(128)", for
example.
We can solve the first by using fdopen() on the duplicated
descriptor. We can't pass this to vreportf, but we could
introduce a new vreportf_to to handle it.
However, to fix the second problem, we instead introduce a
new "set_error_handle" function, which lets the normal
vreportf calls output to a handle besides stderr. Thus we
can get rid of our custom handlers entirely, and just ask
the regular handlers to output to our new descriptor.
And as vwritef has no more callers, it can just go away.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before creating NOTES_MERGE_REF, check NOTES_MERGE_REF using
find_shared_symref and die if we find one. This prevents simultaneous
merges to the same notes branch from different worktrees.
Signed-off-by: David Turner <dturner@twopensource.com>
Reviewed-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new function, find_shared_symref, which contains the heart of
die_if_checked_out, but works for any symref, not just HEAD. Refactor
die_if_checked_out to use the same infrastructure as
find_shared_symref.
Soon, we will use find_shared_symref to protect notes merges in
worktrees.
Signed-off-by: David Turner <dturner@twopensource.com>
Reviewed-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the most common uses of git_path() is to pass a
constant, like git_path("MERGE_MSG"). This has two
drawbacks:
1. The return value is a static buffer, and the lifetime
is dependent on other calls to git_path, etc.
2. There's no compile-time checking of the pathname. This
is OK for a one-off (after all, we have to spell it
correctly at least once), but many of these constant
strings appear throughout the code.
This patch introduces a series of functions to "memoize"
these strings, which are essentially globals for the
lifetime of the program. We compute the value once, take
ownership of the buffer, and return the cached value for
subsequent calls. cache.h provides a helper macro for
defining these functions as one-liners, and defines a few
common ones for global use.
Using a macro is a little bit gross, but it does nicely
document the purpose of the functions. If we need to touch
them all later (e.g., because we learned how to change the
git_dir variable at runtime, and need to invalidate all of
the stored values), it will be much easier to have the
complete list.
Note that the shared-global functions have separate, manual
declarations. We could do something clever with the macros
(e.g., expand it to a declaration in some places, and a
declaration _and_ a definition in path.c). But there aren't
that many, and it's probably better to stay away from
too-magical macros.
Likewise, if we abandon the C preprocessor in favor of
generating these with a script, we could get much fancier.
E.g., normalizing "FOO/BAR-BAZ" into "git_path_foo_bar_baz".
But the small amount of saved typing is probably not worth
the resulting confusion to readers who want to grep for the
function's definition.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The get_repo_path function calls mkpath() and then does some
non-trivial operations on it, like calling
is_git_directory() and read_gitfile(). These are actually
OK (they do not use more pathname static buffers
themselves), but it takes a fair bit of work to verify.
Let's use our own strbuf to store the path, and we can
simply reuse it for each iteration of the loop (we can even
avoid rewriting the beginning part, since we are trying a
series of suffixes).
To make the strbuf cleanup easier, we split out a thin
wrapper. As a bonus, this wrapper can factor out the
canonicalization that happens in all of the early-return
code paths.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The find_hook function returns the results of git_path,
which is a static buffer shared by other path-related calls.
Returning such a buffer is slightly dangerous, because it
can be overwritten by seemingly unrelated functions.
Let's at least keep our _own_ static buffer, so you can
only get in trouble by calling find_hook in quick
succession, which is less likely to happen and more obvious
to notice.
While we're at it, let's add some documentation of the
function's limitations.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first thing we do in this function is copy the input
into a strbuf. Of the 4 callers, 3 of them already have a
strbuf we could use. Let's just take the strbuf, and convert
the remaining caller to use a strbuf, rather than a raw
git_path. This is safer, anyway, as remove_dir_recursively
is a non-trivial function that might use the pathname
buffers itself (this is _probably_ OK, as the likely culprit
would be calling resolve_gitlink_ref, but we do not pass the
proper flags to ask it to avoid blowing away gitlinks).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Assigning the result of git_path is a bad pattern, because
it's not immediately obvious how long you expect the content
to stay valid (and it may be overwritten by subsequent
calls). Let's use a function-local strbuf here instead,
which we know is safe (we just have to remember to free it
in all code paths).
As a bonus, we get rid of a confusing variable-reuse
("ref_file" is used for two distinct purposes).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because it's not safe to store the static-buffer results of
git_path for a long time, we end up formatting the same
filename over and over. We can fix this by using a
function-local strbuf to store the formatted pathname and
avoid repeating ourselves.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 1a83c24 (git_snpath(): retire and replace with
strbuf_git_path(), 2014-11-30) taught log_ref_setup and
log_ref_write_1 to take a strbuf parameter, rather than a
bare string. It then makes an alias to the strbuf's "buf"
field under the original name.
This made the original diff much shorter, but the resulting
code is more complicated that it needs to be. Since we've
aliased the pointer, we drop our reference to the strbuf to
ensure we don't accidentally change it. But if we simply
drop our alias and use "logfile.buf" directly, we do not
have to worry about this aliasing. It's a larger diff, but
the resulting code is simpler.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are no callers of the slightly-dangerous static-buffer
git_path_submodule left. Let's drop it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In iterating over the loose refs in "refs/foo/", we keep a
running strbuf with "refs/foo/one", "refs/foo/two", etc. But
we also need to access these files in the filesystem, as
".git/refs/foo/one", etc. For this latter purpose, we make a
series of independent calls to git_path(). These are safe
(we only use the result to call stat()), but assigning the
result of git_path is a suspicious pattern that we'd rather
avoid.
This patch keeps a running buffer with ".git/refs/foo/", and
we can just append/reset each directory element as we loop.
This matches how we handle the refnames. It should also be
more efficient, as we do not keep formatting the same
".git/refs/foo" prefix (which can be arbitrarily deep).
Technically we are dropping a call to strbuf_cleanup() on
each generated filename, but that's OK; it wasn't doing
anything, as we are putting in single-level names we read
from the filesystem (so it could not possibly be cleaning up
cruft like "./" in this instance).
A clever reader may also note that the running refname
buffer ("refs/foo/") is actually a subset of the filesystem
path buffer (".git/refs/foo/"). We could get by with one
buffer, indexing the length of $GIT_DIR when we want the
refname. However, having tried this, the resulting code
actually ends up a little more confusing, and the efficiency
improvement is tiny (and almost certainly dwarfed by the
system calls we are making).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's an anti-pattern to assign the result of git_path to a
variable, since other calls may reuse our buffer. In this
case, we feed the result to unlink_or_warn immediately
afterwards, so it's OK. However, it's nice to avoid
assignment entirely, which makes it more obvious that
there's no bug.
We can just pass the result directly to unlink_or_warn,
which is a known-simple function. As a bonus, the code flow
is a little more obvious, as we eliminate an extra
conditional (a reader does not have to wonder any more
"under which circumstances is 'path' set?").
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As with the previous commit to git_path, assigning the
result of mkpath is suspicious, since it is not clear
whether we will still depend on the value after it may have
been overwritten by subsequent calls. This patch converts
low-hanging fruit to use mkpathdup instead of mkpath (with
the downside that we must remember to free the result).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because git_path uses a static buffer that is shared with
calls to git_path, mkpath, etc, it can be dangerous to
assign the result to a variable or pass it to a non-trivial
function. The value may change unexpectedly due to other
calls.
None of the cases changed here has a known bug, but they're
worth converting away from git_path because:
1. It's easy to use git_pathdup in these cases.
2. They use constructs (like assignment) that make it
hard to tell whether they're safe or not.
The extra malloc overhead should be trivial, as an
allocation should be an order of magnitude cheaper than a
system call (which we are clearly about to make, since we
are constructing a filename). The real cost is that we must
remember to free the result.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The add_to_alternates_file function blindly uses
hold_lock_file_for_append to copy the existing contents, and
then adds the new line to it. This has two minor problems:
1. We might add duplicate entries, which are ugly and
inefficient.
2. We do not check that the file ends with a newline, in
which case we would bogusly append to the final line.
This is quite unlikely in practice, though, as we call
this function only from git-clone, so presumably we are
the only writers of the file (and we always add a
newline).
Instead of using hold_lock_file_for_append, let's copy the
file line by line, which ensures all records are properly
terminated. If we see an extra line, we can simply abort the
update (there is no point in even copying the rest, as we
know that it would be identical to the original).
As a bonus, we also get rid of some calls to the
static-buffer mkpath and git_path functions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The early part of this test is rather old, and does not
follow our usual style guidelines. In particular:
- the tests liberally chdir, and expect out-of-test "cd"
commands to return them to a sane state
- test commands aren't indented at all
- there are a lot of minor formatting nits, like the
opening quote of the test block on the wrong line,
spaces after ">", etc
This patch fixes the style issues, and uses a few helper
functions, along with subshells and "git -C", to avoid
changing the cwd of the main script.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git_path function has "git_pathdup" and
"strbuf_git_path" variants, but git_submodule_path only
comes in the dangerous, static-buffer variant. That makes
refactoring callers to use the safer functions hard (since
they don't exist).
Since we're already using a strbuf behind the scenes, it's
easy to expose all three of these interfaces with thin
wrappers.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The comment above these functions actually describes
sha1_file_name, and comes from the very first revision of
git. Commit 723c31f (Add "git_path()" and "head_ref()"
helper functions., 2005-07-05) added git_path, pushing the
comment away from the function it describes; later commits
added more functions in this block.
Let's fix the comment to describe these related functions in
more detail. Let's also make sure to point out their safer
alternatives (and move those alternatives below, which makes
more sense when reading the file).
Note that we do not need to move the existing comment to
sha1_file_name. Commit d40d535 (sha1_file.c: document a
bunch of functions defined in the file, 2014-02-21) already
added a much more descriptive comment to it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow an existing file to be registered with the tempfile-handling
infrastructure; in particular, arrange for it to be deleted on program
exit. This can be used if the temporary file has to be created in a
more complicated way than just open(). For example:
* If the file itself needs to be created via the lockfile API
* If it is not a regular file (e.g., a socket)
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add several functions for creating temporary files with
automatically-generated names, analogous to mkstemps(), but also
arranging for the files to be deleted on program exit.
The functions are named according to a pattern depending how they
operate. They will be used to replace many places in the code where
temporary files are created and cleaned up ad-hoc.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes the next step easier.
The old code used to use "path" to set the initial length of
tempfile->filename. This was not helpful because path was usually
relative whereas the value stored to filename will be absolute. So
just initialize the length to 0.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A lot of work went into defining the state diagram for lockfiles and
ensuring correct, race-resistant cleanup in all circumstances.
Most of that infrastructure can be applied directly to *any* temporary
file. So extract a new "tempfile" module from the "lockfile" module.
Reimplement lockfile on top of tempfile.
Subsequent commits will add more users of the new module.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
First beef up the sanity checking in get_locked_file_path() to match
that in commit_lock_file(). Then rewrite commit_lock_file() to use
get_locked_file_path() for its pathname computation.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are about to move those members, so change client code to read them
through accessor functions.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
write_pack_data() passes bundle_fd to start_command() to be used as
the stdout of pack-objects. But start_command() closes its stdout if
it is > 1. This is a problem if bundle_fd is the fd of a lock_file,
because commit_lock_file() will also try to close the fd.
So the old code suppressed commit_lock_file()'s usual behavior of
closing the file descriptor by setting the lock_file object's fd field
to -1.
But this is not really kosher. Code here shouldn't be mutating fields
within the lock_file object.
Instead, duplicate the file descriptor before passing it to
write_pack_data(). Then that function can close its copy without
closing the copy held in the lock_file object.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rearrange/rewrite it somewhat to fit its new environment.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The loop in strbuf_read() uses xread() repeatedly while extending
the strbuf until the call returns zero. If the buffer is
sufficiently large to begin with, this results in xread()
returning the remainder of the file to the end (returning
non-zero), the loop extending the strbuf, and then making another
call to xread() to have it return zero.
By using read_in_full(), we can tell when the read reached the end
of file: when it returns less than was requested, it's eof. This
way we can avoid an extra iteration that allocates an extra 8kB
that is never used.
Signed-off-by: Jim Hill <gjthill@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 5a688fe4 ("core.sharedrepository = 0mode" should set, not
loosen, 2009-03-25), we kept reminding ourselves:
NEEDSWORK: this should be renamed to finalize_temp_file() as
"moving" is only a part of what it does, when no patch between
master to pu changes the call sites of this function.
without doing anything about it. Let's do so.
The purpose of this function was not to move but to finalize. The
detail of the primarily implementation of finalizing was to link the
temporary file to its final name and then to unlink, which wasn't
even "moving". The alternative implementation did "move" by calling
rename(2), which is a fun tangent.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Due to various components of the URI being stripped off it may
happen that we fail to guess a directory name. We currently error
out with a message that it is impossible to create the working
tree '' in such cases. Instead, error out early with a sensible
error message hinting that a directory name should be specified
manually on the command line.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the URI contains a port number and the URI's path component is
empty we fail to guess a sensible directory name. E.g. cloning a
repository 'ssh://example.com:2222/' we guess a directory name
'2222' where we would want the hostname only, e.g. 'example.com'.
We need to take care to not drop trailing port-like numbers in
certain cases. E.g. when cloning a repository 'foo/bar:2222.git'
we want to guess the directory name '2222' instead of 'bar'.
Thus, we have to first check the stripped URI for path separators
and only strip port numbers if there are path separators present.
This heuristic breaks when cloning a repository 'bar:2222.git',
though.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the URI contains authentication data and the URI's path
component is empty, we fail to guess a sensible directory name.
E.g. cloning a repository 'ssh://user:password@example.com/' we
guess a directory name 'password@example.com' where we would want
the hostname only, e.g. 'example.com'.
The naive way of just adding '@' as a path separator would break
cloning repositories like 'foo/bar@baz.git' (which would
currently become 'bar@baz' but would then become 'baz' only).
Instead fix this by first dropping the scheme and then greedily
scanning for an '@' sign until we find the first path separator.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 7e837c6 (clone: simplify string handling in
guess_dir_name(), 2015-07-09) changed clone to use
strip_suffix instead of hand-rolled pointer manipulation.
However, strip_suffix will strip from the end of a
NUL-terminated string, and we may have already stripped some
characters (like directory separators, or "/.git"). This
leads to commands like:
git clone host:foo.git/
failing to strip the ".git".
We must instead convert our pointer arithmetic into a
computed length and feed that to strip_suffix_mem, which will
then reduce the length further for us.
It would be nicer if we could drop the pointer manipulation
entirely, and just continually strip using strip_suffix. But
that doesn't quite work for two reasons:
1. The early suffixes we're stripping are not constant; we
need to look for is_dir_sep, which could be one of
several characters.
2. Mid-way through the stripping we compute the pointer
"start", which shows us the beginning of the pathname.
Which really give us two lengths to work with: the
offset from the start of the string, and from the start
of the path. By using pointers for the early part, we
can just compute the length from "start" when we need
it.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we run "git clone $url", clone guesses from the $url
what to name the local output directory. We don't have any
test coverage of this, so let's add some basic tests.
This reveals a few problems:
- cloning "foo.git/" does not properly remove the ".git";
this is a recent regression from 7e837c6 (clone:
simplify string handling in guess_dir_name(), 2015-07-09)
- likewise, cloning foo/.git does not seem to handle the
bare case (we should end up in foo.git, but we try to
use foo/.git on the local end), which also comes from
7e837c6.
- cloning the root is not very smart about URL parsing,
and usernames and port numbers may end up in the
directory name
All of these tests are marked as failures.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recenty I created a multi-line branch description with '.' and '='
characters on one of the lines, and noticed that fragments of that line
show up when completing set variable names for 'git config', e.g.:
$ git config --get branch.b.description
Branch description to fool the completion script with a
second line containing dot . and equals = characters.
$ git config --unset <TAB>
...
second line containing dot . and equals
...
The completion script runs 'git config --list' and processes its output
to strip the values and keep only the variable names. It does so by
looking for lines containing '.' and '=' and outputting everything
before the '=', which was fooled by my multi-line branch description.
A similar issue exists with aliases and pretty format aliases with
multi-line values, but in that case 'git config --get-regexp' is run and
lines in its output are simply stripped after the first space, so
subsequent lines don't even have to contain '.' and '=' to fool the
completion script.
Use the new '--name-only' option added in the previous commit to list
config variable names reliably in both cases, without error-prone post
processing.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git config' can only show values or name-value pairs, so if a shell
script needs the names of set config variables it has to run 'git config
--list' or '--get-regexp' and parse the output to separate config
variable names from their values. However, such a parsing can't cope
with multi-line values. Though 'git config' can produce null-terminated
output for newline-safe parsing, that's of no use in such a case, becase
shells can't cope with null characters.
Even our own bash completion script suffers from these issues.
Help the completion script, and shell scripts in general, by introducing
the '--name-only' option to modify the output of '--list' and
'--get-regexp' to list only the names of config variables, so they don't
have to perform error-prone post processing to separate variable names
from their values anymore.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "-x" test-script option turns on the shell's "-x"
tracing, which can help show why a particular test is
failing. Unfortunately, this can create false negatives in
some tests if they invoke a shell function with its stderr
redirected. t5512.10 is such a test, as it does:
test_must_fail git ls-remote refs*master >actual 2>&1 &&
test_cmp exp actual
The "actual" file gets the "-x" trace for the test_must_fail
function, which prevents it from matching the expected
output.
There's no way to avoid this without managing the
trace flag inside each sub-function, which isn't really a
workable solution. But unless you specifically care about
t5512.10, we can work around it by enabling tracing only for
the specific tests we want.
You can already do:
./t5512-ls-remote.sh -x --verbose-only=16
to see the trace only for a specific test. But that doesn't
_disable_ the tracing in the other tests; it just sends it
to /dev/null. However, there's no point in generating a
trace that the user won't see, so we can simply disable
tracing whenever it doesn't have a matching verbose flag.
The normal case of just "./t5512-ls-remote.sh -x" stays the
same, as "-x" already implies "--verbose" (and
"--verbose-only" overrides "--verbose", which is why this
works at all). And for our test, we need only check
$verbose, as maybe_setup_verbose will have already
set that flag based on the $verbose_only list).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that GIT_TEST_CHAIN_LINT is on by default, running:
./t0000-basic.sh -x --verbose-only=1
starts with:
expecting success:
find .git/objects -type f -print >should-be-empty &&
test_line_count = 0 should-be-empty
+ exit 117
error: last command exited with $?=117
+ find .git/objects -type f -print
+ test_line_count = 0 should-be-empty
+ test 3 != 3
+ wc -l
+ test 0 = 0
ok 1 - .git/objects should be empty after git init in an empty repo
This is confusing, as the "exit 117" line and the error line
(which is printed in red, no less!) are not part of the test
at all, but are rather in the separate chain-lint test_eval.
Let's unset the "trace" variable when eval-ing the chain
lint check, which avoids this.
Note that we cannot just do a one-shot variable like:
trace= test_eval ...
as the behavior of one-shot variables for function calls
is not portable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you hide a hierarchy of refs using the transfer.hideRefs
config, there is no way to later override that config to
"unhide" it. This patch implements a "negative" hide which
causes matches to immediately be marked as unhidden, even if
another match would hide it. We take care to apply the
matches in reverse-order from how they are fed to us by the
config machinery, as that lets our usual "last one wins"
config precedence work (and entries in .git/config, for
example, will override /etc/gitconfig).
So you can now do:
$ git config --system transfer.hideRefs refs/secret
$ git config transfer.hideRefs '!refs/secret/not-so-secret'
to hide refs/secret in all repos, except for one public bit
in one specific repo. Or you can even do:
$ git clone \
-u "git -c transfer.hiderefs="!refs/foo" upload-pack" \
remote:repo.git
to clone remote:repo.git, overriding any hiding it has
configured.
There are two alternatives that were considered and
rejected:
1. A generic config mechanism for removing an item from a
list. E.g.: (e.g., "[transfer] hideRefs -= refs/foo").
This is nice because it could apply to other
multi-valued config, as well. But it is not nearly as
flexible. There is no way to say:
[transfer]
hideRefs = refs/secret
hideRefs = refs/secret/not-so-secret
Having explicit negative specifications means we can
override previous entries, even if they are not the
same literal string.
2. Adding another variable to override some parts of
hideRefs (e.g., "exposeRefs").
This solves the problem from alternative (1), but it
cannot easily obey the normal config precedence,
because it would use two separate lists. For example:
[transfer]
hideRefs = refs/secret
exposeRefs = refs/secret/not-so-secret
hideRefs = refs/secret/not-so-secret/no-really-its-secret
With two lists, we have to apply the "expose" rules
first, and only then apply the "hide" rules. But that
does not match what the above config intends.
Of course we could internally parse that to a single
list, respecting the ordering, which saves us having to
invent the new "!" syntax. But using a single name
communicates to the user that the ordering _is_
important. And "!" is well-known for negation, and
should not appear at the beginning of a ref (it is
actually valid in a ref-name, but all entries here
should be fully-qualified, starting with "refs/").
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Helped-by: John Keeping <john@keeping.me.uk>
Helped-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Thomas Braun <thomas.braun@virtuell-zuhause.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During cleanup we do a simple 'rm /*' to remove leftover files
from previous tests. As 'rm' errors out when there is anything it
cannot delete and there are directories present at '/' it will
throw an error, causing the '&&' chain to fail.
Fix this by explicitly removing the files.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
