If a user passes "--template=", then our template parameter
is blank. Unfortunately, copy_templates() assumes it has at
least one character, and does all sorts of bad things like
reading from template[-1] and then proceeding to link all of
'/' into the .git directory.
This patch just checks for that condition in copy_templates
and aborts. As a side effect, this means that --template=
now has the meaning "don't copy any templates."
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rewrite of git-mv from a shell script to a builtin was perhaps
a little too straightforward: the git add and git rm queues were
emulated directly, which resulted in a rather complicated code and
caused an inconsistent behaviour when moving dirty index entries;
git mv would update the entry based on working tree state,
except in case of overwrites, where the new entry would still have
sha1 of the old file.
This patch introduces rename_index_entry_at() into the index toolkit,
which will rename an entry while removing any entries the new entry
might render duplicate. This is then used in git mv instead
of all the file queues, resulting in a major simplification
of the code and an inevitable change in git mv -n output format.
Also the code used to refuse renaming overwriting symlink with a regular
file and vice versa; there is no need for that.
A few new tests have been added to the testsuite to reflect this change.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The path list builder had a branch for the case the source is not in index, but
this can happen only if the source was a directory. However, in that case we
have already expanded the list to the directory contents and set mode
to WORKING_DIRECTORY, which is tested earlier.
The patch removes the superfluous branch and adds an assert() instead. git-mv
testsuite still passes.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Not all temporary file creation routines will ensure 14 bytes are
used to generate the temporary file name. In C Git this may be
true, but alternate implementations such as jgit are not always
able to generate a temporary file name with a specific prefix and
also ensure the file name length is 14 bytes long.
Since temporary files in a directory we are fsck'ing should be
uncommon (as they are short lived only long enough for an active
writer to finish writing the file and rename it) we shouldn't see
these show up very often. Always using a prefixcmp() call and
ignoring the length opens up room for other implementations to use
different name generation schemes.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function list_commands_in_dir() tried to be lazy and just chdir()
to the directory which entries it listed, so that the check if the
file is executable could be done on dir->d_name.
However, there is no good reason to jump around wildly just to find
all Git commands.
Instead, have a strbuf and construct the full path dynamically.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After the optimization to --[no-]merged logic, the calculation of the
width of the longest refname to be shown might become inaccurate (since
the matching against merge_filter is performed after adding refs to
ref_list). This patch forces a recalculation of maxwidth when it might
be needed.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic for checking commits against merge_filter will be reused
when we recalculate the maxwidth of refnames.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous optimization to --[no-]merged ended up with some duplicated
code which this patch removes.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Those shorthands are explained in the rev-parse documentation but were not
actually supported by rev-parse itself.
gitk internally uses rev-parse to interpret its command line arguments, and
being able to use these "limit with parents" syntax is handy there.
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A wildcard refspec is internally parsed into a refspec structure with src
and dst strings. Many parts of the code assumed that these do not include
the trailing "/*" when matching the wildcard pattern with an actual ref we
see at the remote. What this meant was that we needed to make sure not
just that the prefix matched, and also that a slash followed the part that
matched.
But a codepath that scans the result from ls-remote and finds matching
refs forgot to check the "matching part must be followed by a slash" rule.
This resulted in "refs/heads/b1" from the remote side to mistakenly match
the source side of "refs/heads/b/*:refs/remotes/b/*" refspec.
Worse, the refspec crafted internally by "git-clone", and a hardcoded
preparsed refspec that is used to implement "git-fetch --tags", violated
this "parsed widcard refspec does not end with slash" rule; simply adding
the "matching part must be followed by a slash" rule then would have
broken codepaths that use these refspecs.
This commit changes the rule to require a trailing slash to parsed
wildcard refspecs. IOW, "refs/heads/b/*:refs/remotes/b/*" is parsed as
src = "refs/heads/b/" and dst = "refs/remotes/b/". This allows us to
simplify the matching logic because we only need to do a prefixcmp() to
notice "refs/heads/b/one" matches and "refs/heads/b1" does not.
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t6030-bisect-porcelain.sh relies on "ls" exiting with nonzero
status when asked to list nonexistent files. Unfortunately,
/bin/ls on Mac OS X 10.3 exits with exit code 0. So look at
its output instead.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Acked-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename cached __git_commandlist to __git_porcelain_commandlist and
add __git_all_commandlist that only filters out *--* helpers.
Completions for 'git help' will use the __git_all_commandlist, while
the __git_porcelain_commandlist is used for git command completion.
Users who actually read man pages may want to see help for plumbing
commands.
Signed-off-by: Lee Marlow <lee.marlow@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The diff.external examples pass a flag to gnu-diff, but GNU diff
does not follow the GIT_EXTERNAL_DIFF interface.
Signed-off-by: Anders Melchiorsen <mail@cup.kalibalik.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://repo.or.cz/git-gui:
git-gui: "Stage Line": Treat independent changes in adjacent lines better
git-gui: Fix "Stage/Unstage Line" with one line of context.
git-gui: Correct 'Visualize Branches' on Mac OS X to start gitk
git-gui: Look for gitk in $PATH, not $LIBEXEC/git-core
Add a menu item to invoke full copy detection in blame.
Kill the blame back-end on window close.
Add options to control the search for copies in blame.
Fix pre-commit hooks under MinGW/MSYS
It is especially useful for Stage/Unstage Line, because
they invoke full state scan and diff reload, which originally
would reset the scroll position to the top of the file.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
It was positioned incorrectly (offset by one position)
if the menu had a tear-off handle.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Assume that we want to commit these states:
Old state == HEAD Intermediate state New state
--------------------------------------------------------
context before context before context before
old 1 new 1 new 1
old 2 old 2 new 2
context after context after context after
that is, want to commit two changes in this order:
1. transform "old 1" into "new 1"
2. transform "old 2" into "new 2"
[This discussion and this patch is about this very case and one other case
as outlined below; any other intermediate states that one could imagine are
not affected by this patch.]
Now assume further, that we have not staged and commited anything, but we
have already changed the working file to the new state. Then we will see
this hunk in the "Unstaged Changes":
@@ -1,4 +1,4 @@
context before
-old 1
-old 2
+new 1
+new 2
context after
The obvious way to stage the intermediate state is to apply "Stage This
Line" to "-old 1" and "+new 1". Unfortunately, this resulted in this
intermediate state:
context before
old 2
new 1
context after
which is not what we wanted. In fact, it was impossible to stage the
intermediate state using "Stage Line". The crux was that if a "+" line was
staged, then the "-" lines were converted to context lines and arranged
*before* the "+" line in the forged hunk that we fed to 'git apply'.
With this patch we now treat "+" lines that are staged differently. In
particular, the "-" lines before the "+" block are moved *after* the
staged "+" line. Now it is possible to get the correct intermediate state
by staging "-old 1" and "+new 1". Problem solved.
But there is a catch.
Noticing that we didn't get the right intermediate state by staging
"-old 1" and "+new 1", we could have had the idea to stage the complete
hunk and to *unstage* "-old 2" and "+new 2". But... the result is the same.
The reason is that there is the exact symmetric problem with unstaging the
last "-" and "+" line that are in adjacent blocks of "-" and "+" lines.
This patch does *not* change the way in which "-" lines are *unstaged*.
Why? Because if we did (i.e. move "+" lines before the "-" line after
converting them to context lines), then it would be impossible to stage
this intermediate state:
context before
old 1
new 2
context after
that is, it would be impossible to stage the two independet changes in the
opposite order.
Let's look at this case a bit further: The obvious way to get this
intermediate state would be to apply "Stage This Line" to "-old 2" and
"+new 2". Before this patch, this worked as expected. With this patch, it
does not work as expected, but it can still be achieved by first staging
the entire hunk, then *unstaging* "-old 1" and "+new 1".
In summary, this patch makes a common case possible, at the expense that
a less common case is made more complicated for the user.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
To "Stage/Unstage Line" we construct a patch that contains exactly one
change (either addition or removal); the hunk header was forged by counting
the old side and adjusting the count by +/-1 for the new side. But when we
counted the context we never counted the changed line itself. If the hunk
had only one removal line and one line of context, like this:
@@ -1,3 +1,2 @@
context 1
-removal
context 2
We had constructed this patch:
@@ -1,2 +1,1 @@
context 1
-removal
context 2
which does not apply because git apply deduces that it must apply at the
end of the file. ("context 2" is considered garbage and ignored.) The fix
is that removal lines must be counted towards the context of the old side.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
"git reset -q" is advertised to "only report errors", but "locally
modified" messages are still shown. They are not errors but diagnostics.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Subversion repositories often require files to have properties such as
svn:mime-type and svn:eol-style set when they are added. Users
typically set these properties automatically using the SVN auto-props
feature with 'svn add'. This commit teaches dcommit to look at the user
SVN configuration and apply matching auto-props entries for files added
by a diff as it is applied to the SVN remote.
Signed-off-by: Brad King <brad.king@kitware.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the exec-path on Windows is derived from the program invocation path,
we must ensure that argv[0] always has a path. Unfortunately, if a program
is invoked from CMD, argv[0] has no path. But on the other hand, the
C runtime offers a global variable, _pgmptr, that always has the full path
to the program. We hook into main() with a preprocessor macro, where we
replace argv[0].
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function had used make_absolute_path(); but this function dies if
the directory that contains the entry whose relative path was supplied in
the argument does not exist. This is a problem if the argument is, for
example, "../libexec/git-core", and that "../libexec" does not exist.
Since the resolution of symbolic links is not required for elements in
PATH, we can fall back to using make_nonrelative_path(), which simply
prepends $PWD to the path.
We have to move make_nonrelative_path() alongside make_absolute_path() in
abspath.c so that git-shell can be linked. See 5b8e6f85f.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If GIT_EXEC_PATH (the macro that is defined in the Makefile) is relative,
it is interpreted relative to the command's invocation path, which usually
is $(bindir).
The Makefile rules were written with the assumption that $(gitexecdir) is
an absolute path. We introduce a separate variable that names the
(absolute) installation directory.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
$(gitexecdir) (as defined in the Makefile) has gained another path
component, but the relative paths in the MINGW section of the Makefile,
which are interpreted relative to it, do not account for it.
Instead of adding another ../ in front of the path, we change the code that
constructs the absolute paths to do it relative to the command's directory,
which is essentially $(bindir). We do it this way because we will also
allow a relative $(gitexecdir) later.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We will need the command invocation path in system_path(). This path was
passed to setup_path(), but system_path() can be called earlier, for
example via:
main
commit_pager_choice
setup_pager
git_config
git_etc_gitconfig
system_path
Therefore, we introduce git_set_argv0_path() and call it as soon as
possible.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The install target needs to check whether the user has opted to make
$(gitexecdir) equal to $(bindir). It did so by a straight string
comparison. Since we are going to allow a relative $(gitexecdir), we have
to normalize paths before comparison, which we do with $(cd there && pwd).
The normalized paths are stored in shell variables. These we can now
reuse in the subsequent install statements, which conveniently shortens
the lines a bit.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is already a copy in $(bindir). A subsequent patch will enable git
to derive the exec-path from its invocation path. If git is invoked
recursively, the first invocation puts the exec-path into PATH, so that
the recursive invocation would find the instance in the exec-path. This
second instance would again try to derive an exec-path from its invocation
path, but would base its result on the wrong "bindir".
We do install the copy of git first, but remove it later, so that we can
use it as the source of the hardlinks for the builtins.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow "--remote repo" and "--exec cmd" in addition to "--remote=repo" and
"--exec=cmd" to make their usage consistent with parameters handled by
parse_options().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the declaration of struct archiver to archive.c, as this is the only
file left where it is used.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
MAX_EXTRA_ARGS is not used anymore, so remove it. MAX_ARGS is used only
in builtin-upload-archive.c, so define it there. Also report the actual
value we're comparing against when the number of args is too big.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
write_archive() in archive.c is the only callsite for the command line
parsing functions located in builtin-archive.c. Move them to the place
where they are used, un-export them and make them static, as hinted at
by Stephan.
Cc: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both archive and upload-archive have to parse command line arguments and
then call the archiver specific write function. Move the duplicate code
to a new function, write_archive().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone" no longer calls "git-fetch-pack", so the documentation is a bit
stale. Instead, state that the -u option is to be used when accessing a
repository over ssh.
Signed-off-by: Steve Haslam <shaslam@lastminute.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The three separate lines for --skip, --resolved and --abort
are merged into one so that it is easy to see that they're
alternative and related options.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The -u option to override the remote system's path to git-upload-pack was
being ignored by "git clone"; caused by a missing call to
transport_set_option to set TRANS_OPT_UPLOADPACK. Presumably this crept in
when git-clone was converted from shell to C.
Signed-off-by: Steve Haslam <shaslam@lastminute.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch removes exit()/die() calls and builtin-specific messages
from launch_editor(), so that it can be used as a general libgit.a
function to launch an editor.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
launch_editor() is declared in strbuf.h but defined in builtin-tag.c.
This patch moves launch_editor() into a new source file editor.c,
but keeps the declaration in strbuf.h.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In Git 1.6 and later gitk is in $prefix/bin while git-gui and all
of the other commands are in $gitexecdir, which is typically not
the same as $prefix/bin. So we cannot launch $gitexecdir/gitk and
expect it to actually start gitk properly.
By allowing git-gui to locate the script via $PATH and then using
exactly that path when we source it during the application start
we can correctly run gitk on any Git 1.5 or later.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Makefile records paths to a few programs in GIT-BUILD-OPTIONS file. These
paths need to be quoted twice: once to protect specials from the shell
that runs the generated GIT-BUILD-OPTIONS file, and again to protect them
(and the first level of quoting itself) from the shell that runs the
"echo" inside the Makefile.
You can test this by trying:
$ ln -s /bin/tar "$HOME/Tes' program/tar"
$ make TAR="$HOME/Tes' program/tar" test
Signed-off-by: Junio C Hamano <gitster@pobox.com>
