Support _U (local deleted, remote modified) and
UT (file type changed in conflict) modes.
Note that 'file type changed' does not refer to
changes in the executable bit, instead it denotes
replacing a file with a link, or vice versa.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Add native support for Araxis Merge, WinMerge and Perforce merge.
Custom merge tools are not implemented by mergetool.tcl; besides,
native support allows constructing the command lines in a more
intelligent way.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Prevent staging files with conflict markers by clicking
on the icon in the 'Unstaged Changes' list. Instead, pretend
that the user clicked the name, and show the diff.
Originally it made some sense to allow staging conflicting
files, because git-gui did not provide any tools to resolve
them from within the GUI. But now that we have added mergetool
capabilities, it is more likely to cause accidental and
non-undoable errors.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Adds an item to the diff context menu in conflict mode,
which invokes a merge tool for the selected file. Tool
command-line handling code was ported from git-mergetool.
Automatic default tool selection and custom merge tools
are not supported. If merge.tool is not set, git-gui
defaults to meld.
This implementation uses a checkout-index hack in order
to retrieve all stages with autocrlf and filters properly
applied. It requires temporarily moving the original
conflict file out of the way.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the file has merge conflicts, show a special version of the
diff context menu, which includes conflict resolution commands
instead of Stage Hunk/Line. This patch only supports resolving
by discarding all sides except one.
Discarding is the only way to resolve conflicts involving symlinks
and/or deletion, excluding manual editing.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Escape '$', because otherwise git-gui crashes while
trying to load malformed Japanese localization strings.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Staging hunks without context does not work, because line number
information would have to be recomputed for individual hunks.
Since it is already possible to stage individual lines using
'Stage Line for Commit', zero context diffs are not really
necessary for git gui.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Add a command-line option to make git gui blame automatically
scroll to a specific line in the file. Useful for integration
with other tools.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Invoke diff-tree between the commit and its parent,
and use the hunks to fix the target line number,
accounting for addition and removal of lines.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Add a context menu item that switches the view to the
parent of the commit under cursor. It is useful to see
how the file looked before the change, and find older
changes in the same lines.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Add a context menu command to load commits
that are within a certain time range from the
selected commit into gitk.
It can be useful for understanding of the code,
especially if the repository is imported from
a VCS that does not support atomic commits.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The new execdir is two levels below the root directory, while
the old execdir 'bin' was only one level below. This commit
adapts the discovery of oguilib that uses relative paths
accordingly. We determine whether we have the extra level in the same
way in which the Makefile defines sharedir, i.e. whether the last
directory part is 'git-core'.
Inspired-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This should help tranlators that need to reorder words and strings.
Original explanation by Christian Stimming.
Also remove unneeded backslashes.
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This updates Japanese translation to match the updated git-gui.pot.
Signed-off-by: しらいしななこ <nanako3@lavabit.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui needs bindir in PATH to be able to run 'git'. bindir
however is not necessarily in PATH if started directly through a
Windows shortcut. Therefore, we used to add the directory
git-gui is located in. But with the new 'libexec/git-core'
layout this directory is no longer identical to bindir.
This commit modifies the wrapper script to discover the bindir
and add it to PATH.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Instead of using an absolute path, git-gui can discover its
gui library using a relative path from execdir. We want to
use the relative path discovery on MinGW to avoid issues
with translation of absolute paths.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We always wanted the library for git-gui to install into the
$prefix/share directory, not $prefix/libexec/share. All of
the files in our library are platform independent and may
be reused across systems, like any other content stored in
the share directory.
Our computation of where our library should install to was broken
when git itself started installing to $prefix/libexec/git-core,
which was one level down from where we expected it to be.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Back in 15430be5a1 ("Look for gitk in $PATH, not $LIBEXEC/git-core")
git-gui learned to use [_which gitk] to locate where gitk's script
is as Git 1.6 will install gitk to $prefix/bin (in $PATH) and all
of the other tools are in $gitexecdir.
This failed on Windows because _which adds the ".exe" suffix as it
searches for the program on $PATH, under the assumption that we can
only execute something from Tcl if it is a proper Windows executable.
When scanning for gitk on Windows we need to omit the ".exe" suffix.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
It is especially useful for Stage/Unstage Line, because
they invoke full state scan and diff reload, which originally
would reset the scroll position to the top of the file.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
It was positioned incorrectly (offset by one position)
if the menu had a tear-off handle.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Assume that we want to commit these states:
Old state == HEAD Intermediate state New state
--------------------------------------------------------
context before context before context before
old 1 new 1 new 1
old 2 old 2 new 2
context after context after context after
that is, want to commit two changes in this order:
1. transform "old 1" into "new 1"
2. transform "old 2" into "new 2"
[This discussion and this patch is about this very case and one other case
as outlined below; any other intermediate states that one could imagine are
not affected by this patch.]
Now assume further, that we have not staged and commited anything, but we
have already changed the working file to the new state. Then we will see
this hunk in the "Unstaged Changes":
@@ -1,4 +1,4 @@
context before
-old 1
-old 2
+new 1
+new 2
context after
The obvious way to stage the intermediate state is to apply "Stage This
Line" to "-old 1" and "+new 1". Unfortunately, this resulted in this
intermediate state:
context before
old 2
new 1
context after
which is not what we wanted. In fact, it was impossible to stage the
intermediate state using "Stage Line". The crux was that if a "+" line was
staged, then the "-" lines were converted to context lines and arranged
*before* the "+" line in the forged hunk that we fed to 'git apply'.
With this patch we now treat "+" lines that are staged differently. In
particular, the "-" lines before the "+" block are moved *after* the
staged "+" line. Now it is possible to get the correct intermediate state
by staging "-old 1" and "+new 1". Problem solved.
But there is a catch.
Noticing that we didn't get the right intermediate state by staging
"-old 1" and "+new 1", we could have had the idea to stage the complete
hunk and to *unstage* "-old 2" and "+new 2". But... the result is the same.
The reason is that there is the exact symmetric problem with unstaging the
last "-" and "+" line that are in adjacent blocks of "-" and "+" lines.
This patch does *not* change the way in which "-" lines are *unstaged*.
Why? Because if we did (i.e. move "+" lines before the "-" line after
converting them to context lines), then it would be impossible to stage
this intermediate state:
context before
old 1
new 2
context after
that is, it would be impossible to stage the two independet changes in the
opposite order.
Let's look at this case a bit further: The obvious way to get this
intermediate state would be to apply "Stage This Line" to "-old 2" and
"+new 2". Before this patch, this worked as expected. With this patch, it
does not work as expected, but it can still be achieved by first staging
the entire hunk, then *unstaging* "-old 1" and "+new 1".
In summary, this patch makes a common case possible, at the expense that
a less common case is made more complicated for the user.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
To "Stage/Unstage Line" we construct a patch that contains exactly one
change (either addition or removal); the hunk header was forged by counting
the old side and adjusting the count by +/-1 for the new side. But when we
counted the context we never counted the changed line itself. If the hunk
had only one removal line and one line of context, like this:
@@ -1,3 +1,2 @@
context 1
-removal
context 2
We had constructed this patch:
@@ -1,2 +1,1 @@
context 1
-removal
context 2
which does not apply because git apply deduces that it must apply at the
end of the file. ("context 2" is considered garbage and ignored.) The fix
is that removal lines must be counted towards the context of the old side.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
In Git 1.6 and later gitk is in $prefix/bin while git-gui and all
of the other commands are in $gitexecdir, which is typically not
the same as $prefix/bin. So we cannot launch $gitexecdir/gitk and
expect it to actually start gitk properly.
By allowing git-gui to locate the script via $PATH and then using
exactly that path when we source it during the application start
we can correctly run gitk on any Git 1.5 or later.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Add a context menu item to invoke blame -C -C -C on a chunk
of the file. The results are used to update the 'original
location' column of the blame display.
The chunk is computed as the smallest line range that covers
both the 'last change' and 'original location' ranges of the
line that was clicked to open the menu.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Currently 'git-gui blame' does not kill its back-end
process, hoping that it will die anyway when the pipe
is closed. However, in some cases the process works
for a long time without producing any output. This
behavior results in a runaway CPU hog.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
On huge repositories, -C -C can be way too slow to be
unconditionally enabled, and it can also be useful to control
its precision.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Apply the work-around for checking the executable
permission of hook files not only on Cygwin, but on
Windows in general.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Now that MERGE_RR was moved out of .git/rr-cache/, we have to delete
it somewhere else. Just in case somebody wants to use a newer git-gui
with an older Git, the file .git/rr-cache/MERGE_RR is removed, too (if
it exists).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Now, as in all OSX apps, there is only one quit menu entry.
It's automatically in the wish menu and calls ::tk::mac::Quit when used.
Signed-off-by: Soeren Finster <sf@9by6.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This adds a context menu entry below "Stage/Unstage Hunk" that stages or
unstages just the line under the mouse pointer.
This is by itself useful, for example, if there are unrelated changes in
the same hunk and the hunk cannot be split by reducing the context.
The feature can also be used to split a hunk by staging a number of
additions (or unstaging a number of removals) until there are enough
context lines that the hunk gets split.
The implementation reads the complete hunk that the line lives in, and
constructs a new hunk by picking existing context lines, removing unneeded
change lines and transforming other change lines to context lines. The
resulting hunk is fed through 'git apply' just like in the "Stage/Unstage
Hunk" case.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Johannes Sixt noticed that if the last file in the list was staged, my
earlier patch would display the diff for the penultimate file, but show
the file _before_ that as being selected.
This was due to my misunderstanding the lno argument to show_diff.
This patch fixes the problem: lno is not decremented in the special case
to handle the last item in the list (though we still need to use $lno-1
to find the right path for the next diff).
Signed-off-by: Abhijit Menon-Sen <ams@toroid.org>
Tested-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If a text widget is asked the index at x,y with y == 0 or y == 1 it will
always return 1.0 as the nearest index, regardless of the x position.
This means that clicking the top 2 pixels of the Unstaged/Staged Changes
lists caused the state of the file there to be toggled. This patch
checks that the pixel clicked is greater than 1, so there is less chance
of accidentally staging or unstaging changes.
Signed-off-by: Richard Quirk <richard.quirk@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Suppose the "Unstaged Changes" pane contains a list of files, and one of
them is selected (i.e., that diff is currently being displayed). If one
clicks on the icon to stage the change, git-gui clears the diff and one
has to click on another filename to see the next diff in the list.
This patch changes that behaviour. If one clicks on the icon to stage
(or unstage) the file whose diff is being displayed, git-gui will move
on to the next filename in the list and display that diff instead of a
blank diff pane. If the selected file was at the end of the list, the
diff pane will display the previous diff instead; if the selected file
was the only one listed, the diff pane will become blank.
If no diff is currently being displayed, this patch changes nothing.
Signed-off-by: Abhijit Menon-Sen <ams@toroid.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
In git-gui after clicking either on 'Create New Repository' or
'Open Existing Repository' the form elements aren't centered like
they are pretty much everywhere else in the app. At least when ran
on a mac, haven't checked on other platforms.
Using grid instead of pack seems to fix this.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the user has put nowinsymlinks into their CYGWIN environment
variable any symlinks created by a Cygwin process (e.g. ln -s)
will not have the ".lnk" suffix. In this case workdir is still
a workdir, but our detection of looking for "info.lnk" fails
as the symlink is actually a normal file called "info".
Instead we just always use Cygwin's test executable to see if
info/exclude is a file. If it is, we assume from there on it
can be read by git-ls-files --others and is thus safe to use
on the command line.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Often new Git users want to know what commands git-gui uses to make
changes, so they can learn the command line interface by mimicking
what git-gui does in response to GUI actions. Showing the direct
commands being executed is easy enough to implement but this is of
little value to end-users because git-gui frequently directly calls
plumbing, not porcelain.
Since the code is already written and tested, its fairly harmless
to include. It may not help a new end-user, but it can help with
debugging git-gui or reverse-engineering its logic to further make
changes to it or implement another GUI for Git.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If we are deleting a local branch from refs/heads/ we need to
make sure any associated configuration stored in .git/config is
also removed (such as branch.$name.remote and branch.$name.merge).
The easiest way to do this is to use git-branch as that automatically
will look for and delete configuration keys as necessary.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When creating new branches if branch.autosetupmerge is not set, or
is set to true or always and we have been given a remote tracking
branch as the starting point for a new branch we want to create the
necessary configuration options in .git/config for the new branch
so that a no argument git-pull on the command line pulls from the
remote repository's branch.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
