Even though git makes sure that it uses enough hexdigits to show an
abbreviated object name unambiguously, as more objects are added to the
repository over time, a short name that used to be unique will stop being
unique. Git uses this many extra hexdigits that are more than necessary
to make the object name currently unique, in the hope that its output will
stay unique a bit longer.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We need to get the correct mode when blame reads the source from the
working tree, the index, or trees. This allows us to omit running
textconv filters on symbolic links.
Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru>
Reviewed-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation in revisions.txt did not match the implementation, and
the comment in sha1_name.c was incomplete.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/maint-reflog-beyond-horizon:
t1503: fix broken test_must_fail calls
rev-parse: tests git rev-parse --verify master@{n}, for various n
sha1_name.c: use warning in preference to fprintf(stderr
rev-parse: exit with non-zero status if ref@{n} is not valid.
This commit changes sha1_name.c to use warning instead of
fprintf(stderr).
Trailing newlines from message formats have been removed
since warning adds one itself.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"The current behaviour of ref@{...} syntax parser is suboptimal:
$ git rev-parse --verify jch@{99999} && echo true
warning: Log for 'jch' only has 1368 entries.
cfb88e9a8d
true
It even knows that it is running off the cut-off point; it should just
cause the caller to notice that fact. I don't think changing it to error
out should cause any harm to existing callers."
With this change:
$ git rev-parse --verify jch@{99999} || echo false
fatal: Log for 'jch' only has 1368 entries.
false
$ git rev-parse jch@{99999} || echo false
fatal: Log for 'jch' only has 1368 entries.
false
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parser tried to clean up the object flags it used while finding
commits with matching string, but was not doing a very good job at it.
This caused "checkout -b new ':/token'", which internally tries to parse
':/token' twice as an object name, to fail when the commit in question
was reachable from only one ref.
The mask bits given to pop_most_recent_commit(&list, MASK) means "I have
already been on the list to be processed, so please do not place me again
even if I am found to be a parent of some other commit on the list." So
mark them when we add them to the list at the beginning.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cp/textconv-cat-file:
git-cat-file.txt: Document --textconv
t/t8007: test textconv support for cat-file
textconv: support for cat_file
sha1_name: add get_sha1_with_context()
Textconv is defined by the diff driver, which is associated with a pathname,
not a blob. This fonction permits to know the context for the sha1 you're
looking for, especially his pathname
Signed-off-by: Clément Poulain <clement.poulain@ensimag.imag.fr>
Signed-off-by: Diane Gasselin <diane.gasselin@ensimag.imag.fr>
Signed-off-by: Axel Bonnet <axel.bonnet@ensimag.imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This also makes it trigger anywhere in the commit message, rather than
just at the beginning. Which tends to be a lot more useful.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to see if user input "git show :path" makes sense tried to access
the index without properly checking the array bound.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.6.6:
dwim_ref: fix dangling symref warning
stash pop: remove 'apply' options during 'drop' invocation
diff: make sure --output=/bad/path is caught
Remove hyphen from "git-command" in two error messages
If we encounter a symref that is dangling, in most cases we will warn
about it. The one exception is a dangling HEAD, as that indicates a
branch yet to be born.
However, the check in dwim_ref was not quite right. If we were fed
something like "HEAD^0" we would try to resolve "HEAD", see that it is
dangling, and then check whether the _original_ string we got was
"HEAD" (which it wasn't in this case). And that makes no sense; the
dangling thing we found was not "HEAD^0" but rather "HEAD".
Fixing this squelches a scary warning from "submodule summary HEAD" (and
consequently "git status" with status.submodulesummary set) in an empty
repo, as the submodule script calls "git rev-parse -q --verify HEAD^0".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Something like foo@{-1} is nonsensical, as the @{-N} syntax
is reserved for "the Nth last branch", and is not an actual
reflog selector. We should not feed such nonsense to
approxidate at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously interpret_branch_name would see @{-1} and stop
parsing, leaving the @{u} as cruft that provoked an error.
Instead, we should recurse if there is more to parse.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-reflog-bad-timestamp:
t0101: use a fixed timestamp when searching in the reflog
Update @{bogus.timestamp} fix not to die()
approxidate_careful() reports errorneous date string
The caller will say "It is not a valid object name" if it wants to, and
some callers may even try to see if it names an object and otherwise try to
see if it is a path.
Pointed out by Jeff King.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For a long time, the time based reflog syntax (e.g. master@{yesterday})
didn't complain when the "human readable" timestamp was misspelled, as
the underlying mechanism tried to be as lenient as possible. The funny
thing was that parsing of "@{now}" even relied on the fact that anything
not recognized by the machinery returned the current timestamp.
Introduce approxidate_careful() that takes an optional pointer to an
integer, that gets assigned 1 when the input does not make sense as a
timestamp.
As I am too lazy to fix all the callers that use approxidate(), most of
the callers do not take advantage of the error checking, but convert the
code to parse reflog to use it as a demonstration.
Tests are mostly from Jeff King.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches @{upstream} syntax to interpret_branch_name(), instead
of dwim_ref() machinery.
There are places in git UI that behaves differently when you give a local
branch name and when you give an extended SHA-1 expression that evaluates
to the commit object name at the tip of the branch. The intent is that
the special syntax such as @{-1} can stand in as if the user spelled the
name of the branch in such places.
The name of the branch "frotz" to switch to ("git checkout frotz"), and
the name of the branch "nitfol" to fork a new branch "frotz" from ("git
checkout -b frotz nitfol"), are examples of such places. These places
take only the name of the branch (e.g. "frotz"), and they are supposed to
act differently to an equivalent refname (e.g. "refs/heads/frotz"), so
hooking the @{upstream} and @{-N} syntax to dwim_ref() is insufficient
when we want to deal with cases a local branch is forked from another
local branch and use "forked@{upstream}" to name the forkee branch.
The "upstream" syntax "forked@{u}" is to specify the ref that "forked" is
configured to merge with, and most often the forkee is a remote tracking
branch, not a local branch. We cannot simply return a local branch name,
but that does not necessarily mean we have to returns the full refname
(e.g. refs/remotes/origin/frotz, when returning origin/frotz is enough).
This update calls shorten_unambiguous_ref() to do so.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/checkout-merge-base:
rebase -i: teach --onto A...B syntax
rebase: fix --onto A...B parsing and add tests
"rebase --onto A...B" replays history on the merge base between A and B
"checkout A...B" switches to the merge base between A and B
A new notation '<branch>@{upstream}' refers to the branch <branch> is set
to build on top of. Missing <branch> (i.e. '@{upstream}') defaults to the
current branch.
This allows you to run, for example,
for l in list of local branches
do
git log --oneline --left-right $l...$l@{upstream}
done
to inspect each of the local branches you are interested in for the
divergence from its upstream.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous error message was the same in many situations (unknown
revision or path not in the working tree). We try to help the user as
much as possible to understand the error, especially with the
sha1:filename notation. In this case, we say whether the sha1 or the
filename is problematic, and diagnose the confusion between
relative-to-root and relative-to-$PWD confusion precisely.
The 7 new error messages are tested.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When flipping commits around on topic branches, I often end up doing
this sequence:
* Run "log --oneline next..jc/frotz" to find out the first commit
on 'jc/frotz' branch not yet merged to 'next';
* Run "checkout $that_commit^" to detach HEAD to the parent of it;
* Rebuild the series on top of that commit; and
* "show-branch jc/frotz HEAD" and "diff jc/frotz HEAD" to verify.
Introduce a new syntax to "git checkout" to name the commit to switch to,
to make the first two steps easier. When the branch to switch to is
specified as A...B (you can omit either A or B but not both, and HEAD
is used instead of the omitted side), the merge base between these two
commits are computed, and if there is one unique one, we detach the HEAD
at that commit.
With this, I can say "checkout next...jc/frotz".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we fall back to a standard for_each_reflog_ent() after failing to find
the nth branch switch (or if we had a short reflog) with the call to
for_each_recent_reflog_ent(), we do not need to free the memory allocated
for our strbuf's since a strbuf_reset() will be performed in
grab_nth_branch_switch() before assigning to the entry.
Plus, the strbuf_release() negates the non-zero hint we initially gave to
strbuf_init() just above these lines.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These allow you to say "git checkout @{-2}" to switch to the branch two
"branch switching" ago by pretending as if you typed the name of that
branch. As it is likely that we will be introducing more short-hands to
write the name of a branch without writing it explicitly, rename the
functions from "nth_last_branch" to more generic "branch_name", to prepare
for different semantics.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
057e713 (Warn use of "origin" when remotes/origin/HEAD is dangling,
2009-02-08) tried to warn dangling refs/remotes/origin/HEAD only when
"origin" was used to refer to it. There was one corner case a symref is
expected to be dangling and this warning is unwarranted: HEAD in an empty
repository.
This squelches the warning for this special case.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous one squelched the diagnositic message we used to issue every
time we enumerated the refs and noticed a dangling ref. This adds the
warning back to the place where the user actually attempts to use it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When get_sha1_basic() is passed a buffer of len 0, it should not
check if buf[len-1] is a curly bracket.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We only accept "checkout: moving from A to B" newer style reflog entries,
in order to pick up A. There is no point computing where B begins at
after running strstr to locate " to ", nor adding 4 and then subtracting 4
from the same pointer.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This can be used to scan only the last few kilobytes of a reflog, as a
cheap optimization when the data you are looking for is likely to be
found near the end of it. The caller is expected to fall back to the
full scan if that is not the case.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To do that, Git no longer looks forward for the '@{' corresponding to the
closing '}' but backward, and dwim_ref() as well as dwim_log() learnt
about the @{-<N>} notation.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can have quite a many reflog entries, but you typically won't recall
which branch you were on after switching branches for more than several
times.
Instead of reading the reflog twice, this reads the branch switching event
and keeps as many entries as the user asked from the latest such entries,
which is the minimum required to be able to switch back to the branch we
were recently on.
[jc: improvements from Dscho squashed in]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let get_sha1() parse the @{-N} syntax, with docs and tests.
Note that while @{-1}^2, @{-2}~5 and such are supported, @{-1}@{1} is
currently not allowed.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Have the lookup only look at "interesting" checkouts, meaning those
that tell you "Already on ..." don't count even though they also cause
a reflog entry.
Let interpret_nth_last_branch() return the number of characters
parsed, so that git-checkout can verify that the branch spec was
@{-N}, not @{-1}^2 or something like that. (The latter will be added
later.)
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement a shortcut @{-N} for the N-th last branch checked out, that
works by parsing the reflog for the message added by previous
git-checkout invocations. We expand the @{-N} to the branch name, so
that you end up on an attached HEAD on that branch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ar/maint-mksnpath:
Fix potentially dangerous uses of mkpath and git_path
Fix mkpath abuse in dwim_ref and dwim_log of sha1_name.c
Add mksnpath which allows you to specify the output buffer
Otherwise the function sometimes fail to resolve obviously correct
refnames, because the string data pointed to by "str" argument were
reused.
The change in dwim_log does not fix anything, just optimizes away
strcpy code as the path can be created directly in the available
buffer.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we support seconds-since-epoch in $GIT_COMMITTER_TIME we should
also support it in a reflog @{...} style notation. We can easily
tell this part from @{nth} style notation by looking to see if the
value is unreasonably large for an @{nth} style notation.
The value 100000000 was chosen as it is already used by date.c to
disambiguate yyyymmdd format from a seconds-since-epoch time value.
A reflog with 100,000,000 record entries is also simply not valid.
Such a reflog would require at least 7.7 GB to store just the old
and new SHA-1 values. So our randomly chosen upper limit for @{nth}
notation is "big enough".
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
f2eba66 (Enable HEAD@{...} and make it independent from the current
branch, 2007-02-03) introduced dwim_log() to handle <refname>@{...}
syntax, and as part of its processing, it checks if the ref exists by
calling refsolve_ref(). It should call it as a reader to make sure the
call returns NULL for a nonexistent ref (not as a potential writer in
which case it does not return NULL).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In get_sha1_basic, we parse a string like
HEAD@{10 seconds ago}:path/to/file
into its constituent ref, reflog date, and path components.
We never actually munge the string itself, but instead keep
offsets into the string with their associated lengths.
When we call approxidate on the contents inside braces,
however, we pass just a string without a length. This means
that approxidate could sometimes look past the closing brace
and (erroneously) interpret the rest of the string as part
of the date.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Make man page building quiet when DOCBOOK_XSL_172 is defined
git-new-workdir: Share SVN meta data between work dirs and the repository
rev-parse: fix meaning of rev~ vs rev~0.
git-svn: don't blindly append '*' to branch/tags config
I think it would make more sense for rev~ to have the same guarantees that
rev^ has, namely to always return a commit. I would also suggest that not
giving a number would have the same effect of defaulting to 1, not 0.
Right now it's a bit illogical, but at least it's an _undocumented_
illogical behaviour.
This patch makes '^' and '~' act the same for the default count (i.e. both
default to 1), and also have the same behaviour for a count of zero.
Before (no discernible pattern):
[torvalds@woody git]$ git rev-parse v1.5.1 v1.5.1^0 v1.5.1~0 v1.5.1^ v1.5.1~
45354a57ee89815cab9545354a57ee045f5759c945354a57ee
After (fairly logical):
[torvalds@woody git]$ git rev-parse v1.5.1 v1.5.1^0 v1.5.1~0 v1.5.1^ v1.5.1~
45354a57ee89815cab9589815cab95045f5759c9045f5759c9
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function returned NULL when no object that matches the name
was found, but that made the callers more complicated, as nobody
used that NULL return as an indication that no object with such
a name exists. They (at least the careful ones) instead took
the full 40-hexdigit and used in such a case, and the careless
ones segfaulted.
With this "git rev-parse --short 5555555555555555555555555555555555555555"
would stop segfaulting.
This is based on Jeff King's rewrite to my RFC patch, but "missing"
logic swapped to "exists". The final logic reads:
For existing objects, make sure the abbreviated string uniquely
identifies it. Otherwise, make sure the abbreviated string is
long enough so that it would not name any existing object.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change removes all obvious useless if-before-free tests.
E.g., it replaces code like this:
if (some_expression)
free (some_expression);
with the now-equivalent:
free (some_expression);
It is equivalent not just because POSIX has required free(NULL)
to work for a long time, but simply because it has worked for
so long that no reasonable porting target fails the test.
Here's some evidence from nearly 1.5 years ago:
http://www.winehq.org/pipermail/wine-patches/2006-October/031544.html
FYI, the change below was prepared by running the following:
git ls-files -z | xargs -0 \
perl -0x3b -pi -e \
's/\bif\s*\(\s*(\S+?)(?:\s*!=\s*NULL)?\s*\)\s+(free\s*\(\s*\1\s*\))/$2/s'
Note however, that it doesn't handle brace-enclosed blocks like
"if (x) { free (x); }". But that's ok, since there were none like
that in git sources.
Beware: if you do use the above snippet, note that it can
produce syntactically invalid C code. That happens when the
affected "if"-statement has a matching "else".
E.g., it would transform this
if (x)
free (x);
else
foo ();
into this:
free (x);
else
foo ();
There were none of those here, either.
If you're interested in automating detection of the useless
tests, you might like the useless-if-before-free script in gnulib:
[it *does* detect brace-enclosed free statements, and has a --name=S
option to make it detect free-like functions with different names]
http://git.sv.gnu.org/gitweb/?p=gnulib.git;a=blob;f=build-aux/useless-if-before-free
Addendum:
Remove one more (in imap-send.c), spotted by Jean-Luc Herren <jlh@gmx.ch>.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mk/maint-parse-careful:
peel_onion: handle NULL
check return value from parse_commit() in various functions
parse_commit: don't fail, if object is NULL
revision.c: handle tag->tagged == NULL
reachable.c::process_tree/blob: check for NULL
process_tag: handle tag->tagged == NULL
check results of parse_commit in merge_bases
list-objects.c::process_tree/blob: check for NULL
reachable.c::add_one_tree: handle NULL from lookup_tree
mark_blob/tree_uninteresting: check for NULL
get_sha1_oneline: check return value of parse_object
read_object_with_reference: don't read beyond the buffer
This converts the index explicitly on read and write to its on-disk
format, allowing the in-core format to contain more flags, and be
simpler.
In particular, the in-core format is now host-endian (as opposed to the
on-disk one that is network endian in order to be able to be shared
across machines) and as a result we can dispense with all the
htonl/ntohl on accesses to the cache_entry fields.
This will make it easier to make use of various temporary flags that do
not exist in the on-disk format.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* sp/refspec-match:
refactor fetch's ref matching to use refname_match()
push: use same rules as git-rev-parse to resolve refspecs
add refname_match()
push: support pushing HEAD to real branch name
Earlier, ':/<oneline-prefix>' would not work (i.e. die) with commands that
set save_commit_buffer = 0, such as blame, describe, pack-objects, reflog
and bundle.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use at least two rulesets for matching abbreviated refnames with
full refnames (starting with 'refs/'). git-rev-parse and git-fetch
use slightly different rules.
This commit introduces a new function refname_match
(const char *abbrev_name, const char *full_name, const char **rules).
abbrev_name is expanded using the rules and matched against full_name.
If a match is found the function returns true. rules is a NULL-terminate
list of format patterns with "%.*s", for example:
const char *ref_rev_parse_rules[] = {
"%.*s",
"refs/%.*s",
"refs/tags/%.*s",
"refs/heads/%.*s",
"refs/remotes/%.*s",
"refs/remotes/%.*s/HEAD",
NULL
};
Asterisks are included in the format strings because this is the form
required in sha1_name.c. Sharing the list with the functions there is
a good idea to avoid duplicating the rules. Hopefully this
facilitates unified matching rules in the future.
This commit makes the rules used by rev-parse for resolving refs to
sha1s available for string comparison. Before this change, the rules
were buried in get_sha1*() and dwim_ref().
A follow-up commit will refactor the rules used by fetch.
refname_match() will be used for matching refspecs in git-send-pack.
Thanks to Daniel Barkalow <barkalow@iabervon.org> for pointing
out that ref_matches_abbrev in remote.c solves a similar problem
and care should be taken to avoid confusion.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These days, show_date() takes a date_mode parameter to specify
the output format, and a separate specialized function for dates
in E-mails does not make much sense anymore.
This retires show_rfc2822_date() function and make it just
another date output format.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
find_short_packed_object was not loading the pack index files.
Teach it to do so.
Signed-off-by: James Bowes <jbowes@dangerouslyinc.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Not every input value passed to get_sha1 is an abbreviated SHA-1.
Its actually quite common for refs to be passed and for those
refs to resolve to full SHA-1s, in which case we may not need to
initialize the alternate object database list in this process.
I'm relocating the call to prepare_alt_odb closer to the code
that actually needs it to maintain the fix first introduced by
Junio in 99a19b43 (to avoid ambiguous SHA-1 abbreviations from
being accepted). This allows us to avoid the alt_odb list setup
if we won't actually need it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
get_sha1_with_mode basically behaves as get_sha1. It has an additional
parameter for storing the mode of the object.
If the mode can not be determined, it stores S_IFINVALID.
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The coming index format change doesn't allow for the number of objects
to be determined from the size of the index file directly. Instead, Let's
initialize a field in the packed_git structure with the object count when
the index is validated since the count is always known at that point.
While at it let's reorder some struct packed_git fields to avoid padding
due to needed 64-bit alignment for some of them.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Let's avoid the open coded pack index reference in pack-object and use
nth_packed_object_sha1() instead. This will help encapsulating index
format differences in one place.
And while at it there is no reason to copy SHA1's over and over while a
direct pointer to it in the index will do just fine.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
What the function wants to return is not if we saw any return
from pop_most_recent_commit(), but if we found what was asked
for.
Signed-off-by: Junio C Hamano <junkio@cox.net>
a try, but all I could get was a segfault. It was dereferencing a NULL
commit list. Fix below. With it, this example now works:
$ mkdir .j; cd .j; touch f
$ git-init; git-add f; git-commit -mc f; echo x >f; git-commit -md f
$ git-diff -p :/c :/d
diff --git a/f b/f
index e69de29..587be6b 100644
--- a/f
+++ b/f
@@ -0,0 +1 @@
+x
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
As we permit up to 2^32-1 objects in a single packfile we cannot
use a signed int to represent the object offset within a packfile,
after 2^31-1 objects we will start seeing negative indexes and
error out or compute bad addresses within the mmap'd index.
This is a minor cleanup that does not introduce any significant
logic changes. It is roach free.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
To name a commit, you can now say
$ git rev-parse ':/Initial revision of "git"'
and it will return the hash of the youngest commit whose
commit message (the oneline) begins with the given prefix.
For future extension, a leading exclamation mark is treated
specially: if you want to match a commit message starting with
a '!', just repeat the exclamation mark. So, to match a commit
which starts with '!Hello World', use
$ git show ':/!!Hello World'
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When refs/remotes/gfi/master and refs/remotes/gfi/HEAD exist,
and the latter is a symref that points at the former, dwim_ref()
resolves string "gfi" to "refs/remotes/gfi/master" as expected,
but dwim_log() does not understand "gfi@{1.day}" and needs to be
told "gfi/master@{1.day}". This is confusing.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since "git log origin/master" uses dwim_log() to match
"refs/remotes/origin/master", it makes sense to do that for
"git log --reflog", too.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is shorter than HEAD@{...} and being nameless it has no semantic
issues.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The work in progress to enable separate reflog for HEAD will make it
independent from reflog of any branch HEAD might be pointing to. In
the mean time disallow HEAD@{...} until that work is completed. Otherwise
people might get used to the current behavior which makes HEAD@{...} an
alias for <current_branch>@{...} which won't be the case later.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
You can pass an extra argument to the function to receive the
reflog message information. Also when the log does not go back
beyond the point the user asked, the cut-off time and count are
given back to the caller for emitting the error messages as
appropriately.
We could later add configuration for get_sha1_basic() to make it
an error instead of it being just a warning.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* lj/refs: (63 commits)
Fix show-ref usagestring
t3200: git-branch testsuite update
sha1_name.c: avoid compilation warnings.
Make git-branch a builtin
ref-log: fix D/F conflict coming from deleted refs.
git-revert with conflicts to behave as git-merge with conflicts
core.logallrefupdates thinko-fix
git-pack-refs --all
core.logallrefupdates create new log file only for branch heads.
Remove bashism from t3210-pack-refs.sh
ref-log: allow ref@{count} syntax.
pack-refs: call fflush before fsync.
pack-refs: use lockfile as everybody else does.
git-fetch: do not look into $GIT_DIR/refs to see if a tag exists.
lock_ref_sha1_basic does not remove empty directories on BSD
Do not create tag leading directories since git update-ref does it.
Check that a tag exists using show-ref instead of looking for the ref file.
Use git-update-ref to delete a tag instead of rm()ing the ref file.
Fix refs.c;:repack_without_ref() clean-up path
Clean up "git-branch.sh" and add remove recursive dir test cases.
...
Often I find myself wanting to say 'tip of "next" before I
merged the last three topics'. Now I can say that with:
git log next@{3}..next
Since small integers alone are invalid input strings to
approxidate, there is no fear of confusion.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* master: (72 commits)
runstatus: do not recurse into subdirectories if not needed
grep: fix --fixed-strings combined with expression.
grep: free expressions and patterns when done.
Corrected copy-and-paste thinko in ignore executable bit test case.
An illustration of rev-list --parents --pretty=raw
Allow git-checkout when on a non-existant branch.
gitweb: Decode long title for link tooltips
git-svn: Fix fetch --no-ignore-externals with GIT_SVN_NO_LIB=1
Ignore executable bit when adding files if filemode=0.
Remove empty ref directories that prevent creating a ref.
Use const for interpolate arguments
git-archive: update documentation
Deprecate merge-recursive.py
gitweb: fix over-eager application of esc_html().
Allow '(no author)' in git-svn's authors file.
Allow 'svn fetch' on '(no date)' revisions in Subversion.
git-repack: allow git-repack to run in subdirectory
Remove upload-tar and make git-tar-tree a thin wrapper to git-archive
git-tar-tree: Move code for git-archive --format=tar to archive-tar.c
git-tar-tree: Remove duplicate git_config() call
...
This adds a "int *flag" parameter to resolve_ref() and makes
for_each_ref() family to call callback function with an extra
"int flag" parameter. They are used to give two bits of
information (REF_ISSYMREF and REF_ISPACKED) about the ref.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The old code used to totally mix up the notion of a ref-name and the path
that that ref was associated with. That was not only horribly ugly (a
number of users got the path, and then wanted to try to turn it back into
a ref-name again), but it fundamnetally doesn't work at all once we do any
setup where a ref doesn't have a 1:1 relationship with a particular
pathname.
This fixes things up so that we use the ref-name throughout, and only
turn it into a pathname once we actually look it up in the filesystem.
That makes a lot of things much clearer and more straightforward.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Like xmalloc and xrealloc xstrdup dies with a useful message if
the native strdup() implementation returns NULL rather than a
valid pointer.
I just tried to use xstrdup in new code and found it to be missing.
However I expected it to be present as xmalloc and xrealloc are
already commonly used throughout the code.
[jc: removed the part that deals with last_XXX, which I am
finding more and more dubious these days.]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This abstracts away the size of the hash values when copying them
from memory location to memory location, much as the introduction
of hashcmp abstracted away hash value comparsion.
A few call sites were using char* rather than unsigned char* so
I added the cast rather than open hashcpy to be void*. This is a
reasonable tradeoff as most call sites already use unsigned char*
and the existing hashcmp is also declared to be unsigned char*.
[jc: Splitted the patch to "master" part, to be followed by a
patch for merge-recursive.c which is not in "master" yet.
Fixed the cast in the latter hunk to combine-diff.c which was
wrong in the original.
Also converted ones left-over in combine-diff.c, diff-lib.c and
upload-pack.c ]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Introduces global inline:
hashcmp(const unsigned char *sha1, const unsigned char *sha2)
Uses memcmp for comparison and returns the result based on the length of
the hash name (a future runtime decision).
Acked-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Replace sha1 comparisons to null_sha1 with a global inline (which previously an
unused static inline in builtin-apply.c)
[jc: with a fix from Jonas Fonseca.]
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This updates the type-enumeration constants introduced to reduce
the memory footprint of "struct object" to match the type bits
already used in the packfile format, by removing the former
(i.e. TYPE_* constant macros) and using the latter (i.e. enum
object_type) throughout the code for consistency.
Eventually we can stop passing around the "type strings"
entirely, and this will help - no confusion about two different
integer enumeration.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This cleans up the use of safe_strncpy() even more. Since it has the
same semantics as strlcpy() use this name instead. Also move the
definition from inside path.c to its own file compat/strlcpy.c, and use
it conditionally at compile time, since some platforms already has
strlcpy(). It's included in the same way as compat/setenv.c.
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This shrinks "struct object" by a small amount, by getting rid of the
"struct type *" pointer and replacing it with a 3-bit bitfield instead.
In addition, we merge the bitfields and the "flags" field, which
incidentally should also remove a useless 4-byte padding from the object
when in 64-bit mode.
Now, our "struct object" is still too damn large, but it's now less
obviously bloated, and of the remaining fields, only the "util" (which is
not used by most things) is clearly something that should be eventually
discarded.
This shrinks the "git-rev-list --all" memory use by about 2.5% on the
kernel archive (and, perhaps more importantly, on the larger mozilla
archive). That may not sound like much, but I suspect it's more on a
64-bit platform.
There are other remaining inefficiencies (the parent lists, for example,
probably have horrible malloc overhead), but this was pretty obvious.
Most of the patch is just changing the comparison of the "type" pointer
from one of the constant string pointers to the appropriate new TYPE_xxx
small integer constant.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Its ambiguous to parse "master@2006-05-17 18:30:foo" when foo is
meant as a file name and ":30" is meant as 30 minutes past 6 pm.
Therefore all date specifications in a sha1 expression must now
appear within brackets and the ':' splitter used for the path name
in a sha1 expression ignores ':' appearing within brackets.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
