Encode ' ' using '=20' even though rfc2047 allows using '_' for
readability. Unfortunately, many programs do not understand this and
just leave the underscore in place. Using '=20' seems to work better.
[jc: with adjustment to t3901]
Signed-off-by: Kristian Høgsberg <hoegsberg@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Only git-ls-files(1) describes the gitignore format in detail, and it does so
with reference to git-ls-files options. Most users don't use the plumbing
command git-ls-files directly, and shouldn't have to look in its manpage for
information on the gitignore format.
Create a new manpage gitignore(5) (Documentation/gitignore.txt), and factor
out the gitignore documentation into that file, changing it to refer to
.gitignore and $GIT_DIR/info/exclude as used by porcelain commands. Reference
gitignore(5) from other relevant manpages and documentation. Remove
now-redundant information on exclude patterns from git-ls-files(1), leaving
only information on how git-ls-files options specify exclude patterns and what
precedence they have.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Instead of using sed on the resulting file, we now have a
git_version asciidoc attribute. This means that we don't
pipe the output of asciidoc, which means we can detect build
failures.
Problem reported by Scott Lamb, solution suggested by Jonas Fonseca.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Its wrong to exit the application if we destroy a random widget
contained withing something else; especially if its some small
trivial thing that has no impact on the overall operation.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Johannes Sixt pointed out that dropping to 0 lines of context
does allow the user to get more fine-grained hunk selection,
especially since we don't currently support "highlight and
apply (or revert)".
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint-1.5.1:
git-config: Improve documentation of git-config file handling
git-config: Various small fixes to asciidoc documentation
decode_85(): fix missing return.
fix signed range problems with hex conversions
The description which files git-config uses and how the various
command line options and environment variables affect its
behaviour was incomplete, outdated and confusing.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add '' around the only mentioned commandline option that didn't
have it.
Make reference to section EXAMPLE a link and rename it to
EXAMPLES because it actually contains a lot of examples.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If the user has no branches at all (their refs/heads/ is empty)
and they are on a detached HEAD we have a valid repository but
there are no branches to populate into the branch pulldown in
the create branch dialog. Instead of erroring out we can skip
that part of the dialog, much like we do with tracking branches
or tags when the user doesn't have any.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When the function detected an invalid base85 sequence, it issued
an error message but forgot to return error status at that point
and kept going.
Signed-off-by: Jerald Fitzjerald <jfj@freemail.gr>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Make hexval_table[] "const". Also make sure that the accessor
function hexval() does not access the table with out-of-range
values by declaring its parameter "unsigned char", instead of
"unsigned int".
With this, gcc can just generate:
movzbl (%rdi), %eax
movsbl hexval_table(%rax),%edx
movzbl 1(%rdi), %eax
movsbl hexval_table(%rax),%eax
sall $4, %edx
orl %eax, %edx
for the code to generate a byte from two hex characters.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Reasonably new versions of the cvs CLI client allow one to
specifiy CVS_SERVER as a method variable directly in
CVSROOT. This is way more convinient than using an
environment variable since it gets saved in CVS/Root.
Since I only discovered this by accident I guess there
might be others out there that learnt CVS on the 1.11
series (or even earlier) and profit from such a note
about cvs improvements in the last couple years.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
While the given example worked, it made us look rather
incompetent. Give the correct reason why one needs the
more complex syntax and change the example to reflect
that.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This test case would have caught the bug fixed by revision
c23290d5.
It puts various forms of $Id$ into a file in the repository,
without allowing git to collapse them to uniformity. Then enables the
$Id$ expansion on checkout, and checks that what is checked out has
coped with the various forms.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
There's no point in calculating an MD5 if we're not going to use
it. We'll also avoid the possibility of there being a bug in the
Perl MD5 library not being able to handle zero-sized files.
This is a followup to 20b3d206ac,
which allows us to track repositories that do not provide MD5
checksums.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* 'maint' of git://repo.or.cz/git-gui:
git-gui: Guess our share/git-gui/lib path at runtime if possible
Correct key bindings to Control-<foo>
git-gui: Tighten internal pattern match for lib/ directory
Those are builtins. Remove them from PROGRAMS variable
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Johannes Sixt asked me to try to avoid embedding the runtime location
of git-gui's library directory in the executable script. Not embedding
it helps the MinGW to be relocatable to another directory should a user
wish to install the programs in a directory other than the location the
packager wanted them to be installed into.
Most of this is a hack. We try to determine if the path of our master
git-gui script will be able to locate the lib by ../share/git-gui/lib.
This should be true if $(gitexecdir) and $(libdir) have the same prefix.
If they do then we defer the assignment of $(libdir) until runtime, and
we get it from $argv0 rather than embedding it into the script itself.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint-1.5.1:
Fix git-svn to handle svn not reporting the md5sum of a file, and test.
More echo "$user_message" fixes.
Add tests for the last two fixes.
git-commit: use printf '%s\n' instead of echo on user-supplied strings
git-am: use printf instead of echo on user-supplied strings
Documentation: Add definition of "evil merge" to GIT Glossary
Replace the last 'dircache's by 'index'
Documentation: Clean up links in GIT Glossary
If the repository contained an expanded ident keyword (i.e. $Id:XXXX$),
then the wrong bytes were discarded, and the Id keyword was not
expanded. The fault was in convert.c:ident_to_worktree().
Previously, when a "$Id:" was found in the repository version,
ident_to_worktree() would search for the next "$" after this, and
discarded everything it found until then. That was done with the loop:
do {
ch = *cp++;
if (ch == '$')
break;
rem--;
} while (rem);
The above loop left cp pointing one character _after_ the final "$"
(because of ch = *cp++). This was different from the non-expanded case,
were cp is left pointing at the "$", and was different from the comment
which stated "discard up to but not including the closing $". This
patch fixes that by making the loop:
do {
ch = *cp;
if (ch == '$')
break;
cp++;
rem--;
} while (rem);
That is, cp is tested _then_ incremented.
This loop exits if it finds a "$" or if it runs out of bytes in the
source. After this loop, if there was no closing "$" the expansion is
skipped, and the outer loop is allowed to continue leaving this
non-keyword as it was. However, when the "$" is found, size is
corrected, before running the expansion:
size -= (cp - src);
This is wrong; size is going to be corrected anyway after the expansion,
so there is no need to do it here. This patch removes that redundant
correction.
To help find this bug, I heavily commented the routine; those comments
are included here as a bonus.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This updates t4014 to check the two fixes for git-am and git-commit
we observed with "echo" that does backslash interpolation by default
without being asked with -e option.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This fixes the same issue git-am had, which was fixed by Jeff
King in the previous commit. Cleverly enough, this commit's log
message is a good test case at the same time.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Under some implementations of echo (such as that provided by
dash), backslash escapes are recognized without any other
options. This means that echo-ing user-supplied strings may
cause any backslash sequences in them to be converted. Using
printf resolves the ambiguity.
This bug can be seen when using git-am to apply a patch
whose subject contains the character sequence "\n"; the
characters are converted to a literal newline. Noticed by
Szekeres Istvan.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Ensure that the same link is not repeated in single glossary entry,
and that there is no self-link i.e. link to current entry.
Add links to other definitions in git glossary.
Remove inappropriate (nonsense) links, or change link to link to
correct definition (to correct term).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* 'master' of git://repo.or.cz/git/fastimport:
Update bash completion for git-config options
Teach bash completion about recent log long options
Teach bash completion about 'git remote update'
Update bash completion header documentation
Remove a duplicate --not option in bash completion
Teach bash completion about git-shortlog
Hide the plumbing diff-{files,index,tree} from bash completion
Update bash completion to ignore some more plumbing commands
When check_sha1_signature fails, program is not terminated:
it prints an error message and returns NULL, so the
buffer returned by read_sha1_file should be freed before.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In git.git repository, "git-name-rev v1.3.0~158" cannot name the
rev, while adjacent revs can be named.
This was because it gives up traversal from the tips of existing
refs as soon as it sees a commit that has older commit timestamp
than what is being named. This is usually a good heuristics,
but v1.3.0~158 has a slightly older commit timestamp than
v1.3.0~157 (i.e. it's child), as these two were made in a
separate repostiory (in fact, in a different continent).
This adds a hardcoded slop value (1 day) to the cut-off
heuristics to work this kind of problem around. The current
algorithm essentially runs around from the available tips down
to ancient commits and names every single rev available that are
newer than cut-off date, so a single day slop would not add that
much overhead in repositories with long enough history where the
performance of name-rev matters.
I think the algorithm could be made a bit smarter by deepening
the graph on demand as a new commit is asked to be named (this
would require rewriting of name_rev() function not to recurse
itself but use a traversal list like revision.c traverser does),
but that would be a separate issue.
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Alberto Bertogli reported on #git that git-gui was exiting with
alt-q, while gitk on the same system was exiting with ctrl-q.
That was not what I wanted. I really wanted M1B to be bound to
the Control key on most non-Mac OS X platforms, but according to
Sam Vilain M1 on most systems means alt. Since gitk always does
control, I'm doing the same thing for all non-Mac OS X systems.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
A few new configuration options grew out of the woodwork during the
1.5.2 series. Most of these are pretty easy to support a completion
of, so we do so.
I wanted to also add completion support for the <driver> part of
merge.<driver>.name but to do that we have to look at all of the
.gitattributes files and guess what the unique set of <driver>
strings would be. Since this appears to be non-trivial I'm punting
on it at this time.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
(Somewhat) recently git-log learned about --reverse (to show commits
in the opposite order) and a looong time ago I think it learned
about --raw (to show the raw diff, rather than a unified diff).
These are both useful options, so we should make them easy for the
user to complete.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Recently the git-remote command grew an update subcommand, which
can be used to execute git-fetch across multiple repositories
in a single step. These can be configured with the 'remotes.*'
configuration options, so we can offer completion for any name that
matches and appears to be useful to git-remote update.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
1) Added a note about supporting the long options for most commands,
as we have been doing so for quite some time.
2) Include a notice that these routines are covered by the GPL,
as that may not be obvious, even though they are distributed
as part of the core Git distribution.
3) Added a short section on how to send patches to the routines,
and to whom they should get sent to. Currently that is me,
as I am the active maintainer.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This was just me being silly; I put the --not option into the
completion list twice. There's no duplicates shown in the shell
as the shell removes them before showing them to the user. But we
really don't need the duplicates in the source script either.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We've had completion for git-log for quite some time, but just
today I noticed we don't have it for the new builtin shortlog
that runs git-log internally. This is indeed a handy thing to
have completion for, especially when your branch names are of
the Very-Very-Long-and-Hard/To-Type/Variety/That-Some-Use.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The diff-* programs are meant to be plumbing for the diff frontend;
most end users aren't invoking these commands directly. Consequently
we should avoid showing them as possible completions.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When e8438420bb allowed us to reload
the marks table on subsequent runs of fast-import we really broke
things, as we set pack_id to MAX_PACK_ID for any objects we imported
into the marks table. Creating a branch from that mark should fail
as we attempt to read the object through a non-existant packed_git
pointer. Instead we have to use the normal Git object system to
locate the older commit, as we ourselves do not have a reference
to the packed_git it resides in.
This bug only occurred because t9300 was not complete enough.
When we added the --import-marks feature we didn't actually test
its implementation enough to verify the function worked as intended.
I have corrected that, and included the changes as part of this fix.
Prior versions of fast-import fail the new test(s); this commit
allows them to pass.
Credit for this bug find goes to Simon Hausmann <simon@lst.de> as
he recently identified a similiar bug in the tree lazy-loading path.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
To resolve a corner case uncovered by Simon Hausmann I need to
reuse the logic for the SHA-1 expression version of the 'from '
command within the mark version of the 'from ' command. This change
doesn't alter any functionality, but is merely breaking the common
code out to a function that I can reuse.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Commit a5c1780a03 sets the pack_id of existing
objects to MAX_PACK_ID. When the same object is referenced later again it is
found in the local object hash. With such a pack_id fast-import should not try
to locate that object in the newly created pack(s).
Signed-off-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
