Ever since the split index feature was introduced [1], refreshing a
split index is prone to a variant of the classic racy git problem.
Consider the following sequence of commands updating the split index
when the shared index contains a racily clean cache entry, i.e. an
entry whose cached stat data matches with the corresponding file in
the worktree and the cached mtime matches that of the index:
echo "cached content" >file
git update-index --split-index --add file
echo "dirty worktree" >file # size stays the same!
# ... wait ...
git update-index --add other-file
Normally, when a non-split index is updated, then do_write_index()
(the function responsible for writing all kinds of indexes, "regular",
split, and shared) recognizes racily clean cache entries, and writes
them with smudged stat data, i.e. with file size set to 0. When
subsequent git commands read the index, they will notice that the
smudged stat data doesn't match with the file in the worktree, and
then go on to check the file's content and notice its dirtiness.
In the above example, however, in the second 'git update-index'
prepare_to_write_split_index() decides which cache entries stored only
in the shared index should be replaced in the new split index. Alas,
this function never looks out for racily clean cache entries, and
since the file's stat data in the worktree hasn't changed since the
shared index was written, it won't be replaced in the new split index.
Consequently, do_write_index() doesn't even get this racily clean
cache entry, and can't smudge its stat data. Subsequent git commands
will then see that the index has more recent mtime than the file and
that the (not smudged) cached stat data still matches with the file in
the worktree, and, ultimately, will erroneously consider the file
clean.
Modify prepare_to_write_split_index() to recognize racily clean cache
entries, and mark them to be added to the split index. Note that
there are two places where it should check raciness: first those cache
entries that are only stored in the shared index, and then those that
have been copied by unpack_trees() from the shared index while it
constructed a new index. This way do_write_index() will get these
racily clean cache entries as well, and will then write them with
smudged stat data to the new split index.
This change makes all tests in 't1701-racy-split-index.sh' pass, so
flip the two 'test_expect_failure' tests to success. Also add the '#'
(as in nr. of trial) to those tests' description that were omitted
when the tests expected failure.
Note that after this change if the index is split when it contains a
racily clean cache entry, then a smudged cache entry will be written
both to the new shared and to the new split indexes. This doesn't
affect regular git commands: as far as they are concerned this is just
an entry in the split index replacing an outdated entry in the shared
index. It did affect a few tests in 't1700-split-index.sh', though,
because they actually check which entries are stored in the split
index; a previous patch in this series has already made the necessary
adjustments in 't1700'. And racily clean cache entries and index
splitting are rare enough to not worry about the resulting duplicated
smudged cache entries, and the additional complexity required to
prevent them is not worth it.
Several tests failed occasionally when the test suite was run with
'GIT_TEST_SPLIT_INDEX=yes'. Here are those that I managed to trace
back to this racy split index problem, starting with those failing
more frequently, with a link to a failing Travis CI build job for
each. The highlighted line [2] shows when the racy file was written,
which is not always in the failing test but in a preceeding setup
test.
t3903-stash.sh:
https://travis-ci.org/git/git/jobs/385542084#L5858
t4024-diff-optimize-common.sh:
https://travis-ci.org/git/git/jobs/386531969#L3174
t4015-diff-whitespace.sh:
https://travis-ci.org/git/git/jobs/360797600#L8215
t2200-add-update.sh:
https://travis-ci.org/git/git/jobs/382543426#L3051
t0090-cache-tree.sh:
https://travis-ci.org/git/git/jobs/416583010#L3679
There might be others, e.g. perhaps 't1000-read-tree-m-3way.sh' and
others using 'lib-read-tree-m-3way.sh', but I couldn't confirm yet.
[1] In the branch leading to the merge commit v2.1.0-rc0~45 (Merge
branch 'nd/split-index', 2014-07-16).
[2] Note that those highlighted lines are in the 'after failure' fold,
and your browser might unhelpfully fold it up before you could
take a good look.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a helper function named is_writing_gitmodules_ok() to verify
that the .gitmodules file is safe to write.
The function name follows the scheme of is_staging_gitmodules_ok().
The two symbolic constants GITMODULES_INDEX and GITMODULES_HEAD are used
to get help from the C preprocessor in preventing typos, especially for
future users.
This is in preparation for a future change which teaches git how to read
.gitmodules from the index or from the current branch if the file is not
available in the working tree.
The rationale behind the check is that writing to .gitmodules requires
the file to be present in the working tree, unless a brand new
.gitmodules is being created (in which case the .gitmodules file would
not exist at all: neither in the working tree nor in the index or in the
current branch).
Expose the functionality also via a "submodule-helper config
--check-writeable" command, as git scripts may want to perform the check
before modifying submodules configuration.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function calls do_diff_cache() which eventually needs to set this
"istate" to unpack_options->src_index [1]. This is an unfortunate fact
that unpack_trees() _will_ update [2] src_index so we can't really pass a
const index_state there. Just remove 'const'.
[1] Right now diff_cache() in diff-lib.c assigns the_index to
src_index. But the plan is to get rid of the_index, so it should
be 'istate' from here that gets assigned to src_index.
[2] Some transient bits in the source index are touched. Optional
extensions can also be removed. But other than that the source
tree should still be valid.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
spatch transformation to replace boolean uses of !hashcmp() to
newly introduced oideq() is added, and applied, to regain
performance lost due to support of multiple hash algorithms.
* jk/cocci:
show_dirstat: simplify same-content check
read-cache: use oideq() in ce_compare functions
convert hashmap comparison functions to oideq()
convert "hashcmp() != 0" to "!hasheq()"
convert "oidcmp() != 0" to "!oideq()"
convert "hashcmp() == 0" to hasheq()
convert "oidcmp() == 0" to oideq()
introduce hasheq() and oideq()
coccinelle: use <...> for function exclusion
Running "git clone" against a project that contain two files with
pathnames that differ only in cases on a case insensitive
filesystem would result in one of the files lost because the
underlying filesystem is incapable of holding both at the same
time. An attempt is made to detect such a case and warn.
* nd/clone-case-smashing-warning:
clone: report duplicate entries on case-insensitive filesystems
Refreshing the index is usually very fast, but it can still take a
long time sometimes. Cold cache is one. Or copying a repo to a new
place (*). It's good to show something to let the user know "git
status" is not hanging, it's just busy doing something.
(*) In this case, all stat info in the index becomes invalid and git
falls back to rehashing all file content to see if there's any
difference between updating stat info in the index. This is quite
expensive. Even with a repo as small as git.git, it takes 3
seconds.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the partner patch to the previous one, but covering
the "hash" variants instead of "oid". Note that our
coccinelle rule is slightly more complex to avoid triggering
the call in hasheq().
I didn't bother to add a new rule to convert:
- hasheq(E1->hash, E2->hash)
+ oideq(E1, E2)
Since these are new functions, there won't be any such
existing callers. And since most of the code is already
using oideq, we're not likely to introduce new ones.
We might still see "!hashcmp(E1->hash, E2->hash)" from topics
in flight. But because our new rule comes after the existing
ones, that should first get converted to "!oidcmp(E1, E2)"
and then to "oideq(E1, E2)".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using the more restrictive oideq() should, in the long run,
give the compiler more opportunities to optimize these
callsites. For now, this conversion should be a complete
noop with respect to the generated code.
The result is also perhaps a little more readable, as it
avoids the "zero is equal" idiom. Since it's so prevalent in
C, I think seasoned programmers tend not to even notice it
anymore, but it can sometimes make for awkward double
negations (e.g., we can drop a few !!oidcmp() instances
here).
This patch was generated almost entirely by the included
coccinelle patch. This mechanical conversion should be
completely safe, because we check explicitly for cases where
oidcmp() is compared to 0, which is what oideq() is doing
under the hood. Note that we don't have to catch "!oidcmp()"
separately; coccinelle's standard isomorphisms make sure the
two are treated equivalently.
I say "almost" because I did hand-edit the coccinelle output
to fix up a few style violations (it mostly keeps the
original formatting, but sometimes unwraps long lines).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The main comparison functions we provide for comparing
object ids are hashcmp() and oidcmp(). These are more
flexible than a strict equality check, since they also
express ordering. That makes them useful for sorting and
binary searching. However, it also makes them potentially
slower than a strict equality check. Consider this C code,
which is traditionally what our hashcmp has looked like:
#include <string.h>
int hashcmp(const unsigned char *a, const unsigned char *b)
{
return memcmp(a, b, 20);
}
Compiling with "gcc -O2 -S -fverbose-asm", the generated
assembly shows that we actually call memcmp(). But if we
change this to a strict equality check:
return !memcmp(a, b, 20);
we get a faster inline version:
movq (%rdi), %rax # MEM[(void *)a_4(D)], MEM[(void *)a_4(D)]
movq 8(%rdi), %rdx # MEM[(void *)a_4(D)], tmp101
xorq (%rsi), %rax # MEM[(void *)b_5(D)], tmp94
xorq 8(%rsi), %rdx # MEM[(void *)b_5(D)], tmp93
orq %rax, %rdx # tmp94, tmp93
jne .L2 #,
movl 16(%rsi), %eax # MEM[(void *)b_5(D)], tmp104
cmpl %eax, 16(%rdi) # tmp104, MEM[(void *)a_4(D)]
je .L5 #,
Obviously our hashcmp() doesn't include the "!". But because
it's an inline function, optimizing compilers are able to
see "!hashcmp(a,b)" in calling code and take advantage of
this case. So there has been no value thus far in
introducing a more restricted interface for doing strict
equality checks.
But as Git learns about more values for the_hash_algo, our
hashcmp() will grow more complicated and may even delegate
at runtime to functions optimized specifically for that hash
size. That breaks the inline connection we have, and the
compiler will have to assume that the caller really cares
about the sign and magnitude of the memcmp() result, even
though the vast majority don't.
We can solve that by introducing a hasheq() function (and
matching oideq() wrapper), which callers can use to make it
clear that they only care about equality. For now, the
implementation will literally be "!hashcmp()", but it frees
us up later to introduce code optimized specifically for the
equality check.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prior to 509f6f62a4 (cache: update object ID functions for
the_hash_algo, 2018-07-16), hashcmp() called memcmp() with a
constant size of 20 bytes. Some compilers were able to turn
that into a few quad-word comparisons, which is faster than
actually calling memcmp().
In 509f6f62a4, we started using the_hash_algo->rawsz
instead. Even though this will always be 20, the compiler
doesn't know that while inlining hashcmp() and ends up just
generating a call to memcmp().
Eventually we'll have to deal with multiple hash sizes, but
for the upcoming v2.19, we can restore some of the original
performance by asserting on the size. That gives the
compiler enough information to know that the memcmp will
always be called with a length of 20, and it performs the
same optimization.
Here are numbers for p0001.2 run against linux.git on a few
versions. This is using -O2 with gcc 8.2.0.
Test v2.18.0 v2.19.0-rc0 HEAD
------------------------------------------------------------------------------
0001.2: 34.24(33.81+0.43) 34.83(34.42+0.40) +1.7% 33.90(33.47+0.42) -1.0%
You can see that v2.19 is a little slower than v2.18. This
commit ended up slightly faster than v2.18, but there's a
fair bit of run-to-run noise (the generated code in the two
cases is basically the same). This patch does seem to be
consistently 1-2% faster than v2.19.
I tried changing hashcpy(), which was also touched by
509f6f62a4, in the same way, but couldn't measure any
speedup. Which makes sense, at least for this workload. A
traversal of the whole commit graph requires looking up
every entry of every tree via lookup_object(). That's many
multiples of the numbers of objects in the repository (most
of the lookups just return "yes, we already saw that
object").
[jn: verified using "make object.s" that the memcmp call goes away.]
Reported-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Jeff King <peff@peff.net
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code hygiene improvement for the header files.
* en/incl-forward-decl:
Remove forward declaration of an enum
compat/precompose_utf8.h: use more common include guard style
urlmatch.h: fix include guard
Move definition of enum branch_track from cache.h to branch.h
alloc: make allocate_alloc_state and clear_alloc_state more consistent
Add missing includes and forward declarations
The API to iterate over all objects learned to optionally list
objects in the order they appear in packfiles, which helps locality
of access if the caller accesses these objects while as objects are
enumerated.
* jk/for-each-object-iteration:
for_each_*_object: move declarations to object-store.h
cat-file: use a single strbuf for all output
cat-file: split batch "buf" into two variables
cat-file: use oidset check-and-insert
cat-file: support "unordered" output for --batch-all-objects
cat-file: rename batch_{loose,packed}_object callbacks
t1006: test cat-file --batch-all-objects with duplicates
for_each_packed_object: support iterating in pack-order
for_each_*_object: give more comprehensive docstrings
for_each_*_object: take flag arguments as enum
for_each_*_object: store flag definitions in a single location
Paths that only differ in case work fine in a case-sensitive
filesystems, but if those repos are cloned in a case-insensitive one,
you'll get problems. The first thing to notice is "git status" will
never be clean with no indication what exactly is "dirty".
This patch helps the situation a bit by pointing out the problem at
clone time. Even though this patch talks about case sensitivity, the
patch makes no assumption about folding rules by the filesystem. It
simply observes that if an entry has been already checked out at clone
time when we're about to write a new path, some folding rules are
behind this.
In the case that we can't rely on filesystem (via inode number) to do
this check, fall back to fspathcmp() which is not perfect but should
not give false positives.
This patch is tested with vim-colorschemes and Sublime-Gitignore
repositories on a JFS partition with case insensitive support on
Linux.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a script (in contrib/) to help users of VSCode work better with
our codebase.
* js/vscode:
vscode: let cSpell work on commit messages, too
vscode: add a dictionary for cSpell
vscode: use 8-space tabs, no trailing ws, etc for Git's source code
vscode: wrap commit messages at column 72 by default
vscode: only overwrite C/C++ settings
mingw: define WIN32 explicitly
cache.h: extract enum declaration from inside a struct declaration
vscode: hard-code a couple defines
contrib: add a script to initialize VS Code configuration
A new configuration variable core.usereplacerefs has been added,
primarily to help server installations that want to ignore the
replace mechanism altogether.
* jk/core-use-replace-refs:
add core.usereplacerefs config option
check_replace_refs: rename to read_replace_refs
check_replace_refs: fix outdated comment
'branch_track' feels more closely related to branching, and it is
needed later in branch.h; rather than #include'ing cache.h in branch.h
for this small enum, just move the enum and the external declaration
for git_branch_track to branch.h.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The for_each_loose_object() and for_each_packed_object()
functions are meant to be part of a unified interface: they
use the same set of for_each_object_flags, and it's not
inconceivable that we might one day add a single
for_each_object() wrapper around them.
Let's put them together in a single file, so we can avoid
awkwardness like saying "the flags for this function are
over in cache.h". Moving the loose functions to packfile.h
is silly. Moving the packed functions to cache.h works, but
makes the "cache.h is a kitchen sink" problem worse. The
best place is the recently-created object-store.h, since
these are quite obviously related to object storage.
The for_each_*_in_objdir() functions do not use the same
flags, but they are logically part of the same interface as
for_each_loose_object(), and share callback signatures. So
we'll move those, as well, as they also make sense in
object-store.h.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently iterate over objects within a pack in .idx
order, which uses the object hashes. That means that it
is effectively random with respect to the location of the
object within the pack. If you're going to access the actual
object data, there are two reasons to move linearly through
the pack itself:
1. It improves the locality of access in the packfile. In
the cold-cache case, this may mean fewer disk seeks, or
better usage of disk cache.
2. We store related deltas together in the packfile. Which
means that the delta base cache can operate much more
efficiently if we visit all of those related deltas in
sequence, as the earlier items are likely to still be
in the cache. Whereas if we visit the objects in
random order, our cache entries are much more likely to
have been evicted by unrelated deltas in the meantime.
So in general, if you're going to access the object contents
pack order is generally going to end up more efficient.
But if you're simply generating a list of object names, or
if you're going to end up sorting the result anyway, you're
better off just using the .idx order, as finding the pack
order means generating the in-memory pack-revindex.
According to the numbers in 8b8dfd5132 (pack-revindex:
radix-sort the revindex, 2013-07-11), that takes about 200ms
for linux.git, and 20ms for git.git (those numbers are a few
years old but are still a good ballpark).
That makes it a good optimization for some cases (we can
save tens of seconds in git.git by having good locality of
delta access, for a 20ms cost), but a bad one for others
(e.g., right now "cat-file --batch-all-objects
--batch-check="%(objectname)" is 170ms in git.git, so adding
20ms to that is noticeable).
Hence this patch makes it an optional flag. You can't
actually do any interesting timings yet, as it's not plumbed
through to any user-facing tools like cat-file. That will
come in a later patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already mention the local/alternate behavior of these
functions, but we can help clarify a few other behaviors:
- there's no need to mention LOCAL_ONLY specifically, since
we already reference the flags by type (and as we add
more flags, we don't want to have to mention each)
- clarify that reachability doesn't matter here; this is
all accessible objects
- what ordering/uniqueness guarantees we give
- how pack-specific flags are handled for the loose case
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's not wrong to pass our flags in an "unsigned", as we
know it will be at least as large as the enum. However,
using the enum in the declaration makes it more obvious
where to find the list of flags.
While we're here, let's also drop the "extern" noise-words
from the declarations, per our modern coding style.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These flags were split between cache.h and packfile.h,
because some of the flags apply only to packs. However, they
share a single numeric namespace, since both are respected
for the packed variant. Let's make sure they're defined
together so that nobody accidentally adds a new flag in one
location that duplicates the other.
While we're here, let's also put them in an enum (which
helps debugger visibility) and use "(1<<n)" rather than
counting powers of 2 manually.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As part of the rewrite of interactive rebase, the sequencer will need to
open the sequence editor to allow the user to edit the todo list.
Instead of duplicating the existing launch_editor() function, this
refactors it to a new function, launch_specified_editor(), which takes
the editor as a parameter, in addition to the path, the buffer and the
environment variables. launch_sequence_editor() is then added to launch
the sequence editor.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recursive merge strategy did not properly ensure there was no
change between HEAD and the index before performing its operation,
which has been corrected.
* en/dirty-merge-fixes:
merge: fix misleading pre-merge check documentation
merge-recursive: enforce rule that index matches head before merging
t6044: add more testcases with staged changes before a merge is invoked
merge-recursive: fix assumption that head tree being merged is HEAD
merge-recursive: make sure when we say we abort that we actually abort
t6044: add a testcase for index matching head, when head doesn't match HEAD
t6044: verify that merges expected to abort actually abort
index_has_changes(): avoid assuming operating on the_index
read-cache.c: move index_has_changes() from merge.c
For a large tree, the index needs to hold many cache entries
allocated on heap. These cache entries are now allocated out of a
dedicated memory pool to amortize malloc(3) overhead.
* jm/cache-entry-from-mem-pool:
block alloc: add validations around cache_entry lifecyle
block alloc: allocate cache entries from mem_pool
mem-pool: fill out functionality
mem-pool: add life cycle management functions
mem-pool: only search head block for available space
block alloc: add lifecycle APIs for cache_entry structs
read-cache: teach make_cache_entry to take object_id
read-cache: teach refresh_cache_entry to take istate
Conversion from uchar[40] to struct object_id continues.
* bc/object-id:
pretty: switch hard-coded constants to the_hash_algo
sha1-file: convert constants to uses of the_hash_algo
log-tree: switch GIT_SHA1_HEXSZ to the_hash_algo->hexsz
diff: switch GIT_SHA1_HEXSZ to use the_hash_algo
builtin/merge-recursive: make hash independent
builtin/merge: switch to use the_hash_algo
builtin/fmt-merge-msg: make hash independent
builtin/update-index: simplify parsing of cacheinfo
builtin/update-index: convert to using the_hash_algo
refs/files-backend: use the_hash_algo for writing refs
sha1-name: use the_hash_algo when parsing object names
strbuf: allocate space with GIT_MAX_HEXSZ
commit: express tree entry constants in terms of the_hash_algo
hex: switch to using the_hash_algo
tree-walk: replace hard-coded constants with the_hash_algo
cache: update object ID functions for the_hash_algo
While it is technically possible, it is confusing. Not only the user,
but also VS Code's intellisense.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was added as a NEEDSWORK in c3c36d7de2 (replace-object:
check_replace_refs is safe in multi repo environment, 2018-04-11),
waiting for a calmer period. Since doing so now doesn't conflict
with anything in 'pu', it seems as good a time as any.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit afc711b8e1 (rename read_replace_refs to
check_replace_refs, 2014-02-18) added a comment mentioning
that check_replace_refs is set in two ways:
- from user intent via --no-replace-objects, etc
- after seeing there are no replace refs to respect
Since c3c36d7de2 (replace-object: check_replace_refs is safe
in multi repo environment, 2018-04-11) the second is no
longer true. Let's drop that part of the comment.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The conversion to pass "the_repository" and then "a_repository"
throughout the object access API continues.
* sb/object-store-grafts:
commit: allow lookup_commit_graft to handle arbitrary repositories
commit: allow prepare_commit_graft to handle arbitrary repositories
shallow: migrate shallow information into the object parser
path.c: migrate global git_path_* to take a repository argument
cache: convert get_graft_file to handle arbitrary repositories
commit: convert read_graft_file to handle arbitrary repositories
commit: convert register_commit_graft to handle arbitrary repositories
commit: convert commit_graft_pos() to handle arbitrary repositories
shallow: add repository argument to is_repository_shallow
shallow: add repository argument to check_shallow_file_for_update
shallow: add repository argument to register_shallow
shallow: add repository argument to set_alternate_shallow_file
commit: add repository argument to lookup_commit_graft
commit: add repository argument to prepare_commit_graft
commit: add repository argument to read_graft_file
commit: add repository argument to register_commit_graft
commit: add repository argument to commit_graft_pos
object: move grafts to object parser
object-store: move object access functions to object-store.h
Add a struct repository argument to the functions in commit-graph.h that
read the commit graph. (This commit does not affect functions that write
commit graphs.)
Because the commit graph functions can now read the commit graph of any
repository, the global variable core_commit_graph has been removed.
Instead, the config option core.commitGraph is now read on the first
time in a repository that a commit is attempted to be parsed using its
commit graph.
This commit includes a test that exercises the functionality on an
arbitrary repository that is not the_repository.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of our code has been converted to use struct object_id for object
IDs. However, there are some places that still have not, and there are
a variety of places that compare equivalently sized hashes that are not
object IDs. All of these hashes are artifacts of the internal hash
algorithm in use, and when we switch to NewHash for object storage, all
of these uses will also switch.
Update the hashcpy, hashclr, and hashcmp functions to use the_hash_algo,
since they are used in a variety of places to copy and manipulate
buffers that need to move data into or out of struct object_id. This
has the effect of making the corresponding oid* functions use
the_hash_algo as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git merge-recursive` does a three-way merge between user-specified trees
base, head, and remote. Since the user is allowed to specify head, we can
not necesarily assume that head == HEAD.
Modify index_has_changes() to take an extra argument specifying the tree
to compare against. If NULL, it will compare to HEAD. We then use this
from merge-recursive to make sure we compare to the user-specified head.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Modify index_has_changes() to take a struct istate* instead of just
operating on the_index. This is only a partial conversion, though,
because we call do_diff_cache() which implicitly assumes work is to be
done on the_index. Ongoing work is being done elsewhere to do the
remainder of the conversion, and thus is not duplicated here. Instead,
a simple check is put in place until that work is complete.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an option (controlled by an environment variable) perform extra
validations on mem_pool allocated cache entries. When set:
1) Invalidate cache_entry memory when discarding cache_entry.
2) When discarding index_state struct, verify that all cache_entries
were allocated from expected mem_pool.
3) When discarding mem_pools, invalidate mem_pool memory.
This should provide extra checks that mem_pools and their allocated
cache_entries are being used as expected.
Signed-off-by: Jameson Miller <jamill@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When reading large indexes from disk, a portion of the time is
dominated in malloc() calls. This can be mitigated by allocating a
large block of memory and manage it ourselves via memory pools.
This change moves the cache entry allocation to be on top of memory
pools.
Design:
The index_state struct will gain a notion of an associated memory_pool
from which cache_entries will be allocated from. When reading in the
index from disk, we have information on the number of entries and
their size, which can guide us in deciding how large our initial
memory allocation should be. When an index is discarded, the
associated memory_pool will be discarded as well - so the lifetime of
a cache_entry is tied to the lifetime of the index_state that it was
allocated for.
In the case of a Split Index, the following rules are followed. 1st,
some terminology is defined:
Terminology:
- 'the_index': represents the logical view of the index
- 'split_index': represents the "base" cache entries. Read from the
split index file.
'the_index' can reference a single split_index, as well as
cache_entries from the split_index. `the_index` will be discarded
before the `split_index` is. This means that when we are allocating
cache_entries in the presence of a split index, we need to allocate
the entries from the `split_index`'s memory pool. This allows us to
follow the pattern that `the_index` can reference cache_entries from
the `split_index`, and that the cache_entries will not be freed while
they are still being referenced.
Managing transient cache_entry structs:
Cache entries are usually allocated for an index, but this is not always
the case. Cache entries are sometimes allocated because this is the
type that the existing checkout_entry function works with. Because of
this, the existing code needs to handle cache entries associated with an
index / memory pool, and those that only exist transiently. Several
strategies were contemplated around how to handle this:
Chosen approach:
An extra field was added to the cache_entry type to track whether the
cache_entry was allocated from a memory pool or not. This is currently
an int field, as there are no more available bits in the existing
ce_flags bit field. If / when more bits are needed, this new field can
be turned into a proper bit field.
Alternatives:
1) Do not include any information about how the cache_entry was
allocated. Calling code would be responsible for tracking whether the
cache_entry needed to be freed or not.
Pro: No extra memory overhead to track this state
Con: Extra complexity in callers to handle this correctly.
The extra complexity and burden to not regress this behavior in the
future was more than we wanted.
2) cache_entry would gain knowledge about which mem_pool allocated it
Pro: Could (potentially) do extra logic to know when a mem_pool no
longer had references to any cache_entry
Con: cache_entry would grow heavier by a pointer, instead of int
We didn't see a tangible benefit to this approach
3) Do not add any extra information to a cache_entry, but when freeing a
cache entry, check if the memory exists in a region managed by existing
mem_pools.
Pro: No extra memory overhead to track state
Con: Extra computation is performed when freeing cache entries
We decided tracking and iterating over known memory pool regions was
less desirable than adding an extra field to track this stae.
Signed-off-by: Jameson Miller <jamill@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It has been observed that the time spent loading an index with a large
number of entries is partly dominated by malloc() calls. This change
is in preparation for using memory pools to reduce the number of
malloc() calls made to allocate cahce entries when loading an index.
Add an API to allocate and discard cache entries, abstracting the
details of managing the memory backing the cache entries. This commit
does actually change how memory is managed - this will be done in a
later commit in the series.
This change makes the distinction between cache entries that are
associated with an index and cache entries that are not associated with
an index. A main use of cache entries is with an index, and we can
optimize the memory management around this. We still have other cases
where a cache entry is not persisted with an index, and so we need to
handle the "transient" use case as well.
To keep the congnitive overhead of managing the cache entries, there
will only be a single discard function. This means there must be enough
information kept with the cache entry so that we know how to discard
them.
A summary of the main functions in the API is:
make_cache_entry: create cache entry for use in an index. Uses specified
parameters to populate cache_entry fields.
make_empty_cache_entry: Create an empty cache entry for use in an index.
Returns cache entry with empty fields.
make_transient_cache_entry: create cache entry that is not used in an
index. Uses specified parameters to populate
cache_entry fields.
make_empty_transient_cache_entry: create cache entry that is not used in
an index. Returns cache entry with
empty fields.
discard_cache_entry: A single function that knows how to discard a cache
entry regardless of how it was allocated.
Signed-off-by: Jameson Miller <jamill@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor refresh_cache_entry() to work on a specific index, instead of
implicitly using the_index. This is in preparation for making the
make_cache_entry function apply to a specific index.
Signed-off-by: Jameson Miller <jamill@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The conversion to pass "the_repository" and then "a_repository"
throughout the object access API continues.
* sb/object-store-alloc:
alloc: allow arbitrary repositories for alloc functions
object: allow create_object to handle arbitrary repositories
object: allow grow_object_hash to handle arbitrary repositories
alloc: add repository argument to alloc_commit_index
alloc: add repository argument to alloc_report
alloc: add repository argument to alloc_object_node
alloc: add repository argument to alloc_tag_node
alloc: add repository argument to alloc_commit_node
alloc: add repository argument to alloc_tree_node
alloc: add repository argument to alloc_blob_node
object: add repository argument to grow_object_hash
object: add repository argument to create_object
repository: introduce parsed objects field
The list of commands with their various attributes were spread
across a few places in the build procedure, but it now is getting a
bit more consolidated to allow more automation.
* nd/command-list:
completion: allow to customize the completable command list
completion: add and use --list-cmds=alias
completion: add and use --list-cmds=nohelpers
Move declaration for alias.c to alias.h
completion: reduce completable command list
completion: let git provide the completable command list
command-list.txt: documentation and guide line
help: use command-list.txt for the source of guides
help: add "-a --verbose" to list all commands with synopsis
git: support --list-cmds=list-<category>
completion: implement and use --list-cmds=main,others
git --list-cmds: collect command list in a string_list
git.c: convert --list-* to --list-cmds=*
Remove common-cmds.h
help: use command-list.h for common command list
generate-cmds.sh: export all commands to command-list.h
generate-cmds.sh: factor out synopsis extract code
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (42 commits)
merge-one-file: compute empty blob object ID
add--interactive: compute the empty tree value
Update shell scripts to compute empty tree object ID
sha1_file: only expose empty object constants through git_hash_algo
dir: use the_hash_algo for empty blob object ID
sequencer: use the_hash_algo for empty tree object ID
cache-tree: use is_empty_tree_oid
sha1_file: convert cached object code to struct object_id
builtin/reset: convert use of EMPTY_TREE_SHA1_BIN
builtin/receive-pack: convert one use of EMPTY_TREE_SHA1_HEX
wt-status: convert two uses of EMPTY_TREE_SHA1_HEX
submodule: convert several uses of EMPTY_TREE_SHA1_HEX
sequencer: convert one use of EMPTY_TREE_SHA1_HEX
merge: convert empty tree constant to the_hash_algo
builtin/merge: switch tree functions to use object_id
builtin/am: convert uses of EMPTY_TREE_SHA1_BIN to the_hash_algo
sha1-file: add functions for hex empty tree and blob OIDs
builtin/receive-pack: avoid hard-coded constants for push certs
diff: specify abbreviation size in terms of the_hash_algo
upload-pack: replace use of several hard-coded constants
...
"git pack-objects" needs to allocate tons of "struct object_entry"
while doing its work, and shrinking its size helps the performance
quite a bit.
* nd/pack-objects-pack-struct:
ci: exercise the whole test suite with uncommon code in pack-objects
pack-objects: reorder members to shrink struct object_entry
pack-objects: shrink delta_size field in struct object_entry
pack-objects: shrink size field in struct object_entry
pack-objects: clarify the use of object_entry::size
pack-objects: don't check size when the object is bad
pack-objects: shrink z_delta_size field in struct object_entry
pack-objects: refer to delta objects by index instead of pointer
pack-objects: move in_pack out of struct object_entry
pack-objects: move in_pack_pos out of struct object_entry
pack-objects: use bitfield for object_entry::depth
pack-objects: use bitfield for object_entry::dfs_state
pack-objects: turn type and in_pack_type to bitfields
pack-objects: a bit of document about struct object_entry
read-cache.c: make $GIT_TEST_SPLIT_INDEX boolean
The codepath around object-info API has been taught to take the
repository object (which in turn tells the API which object store
the objects are to be located).
* sb/oid-object-info:
cache.h: allow oid_object_info to handle arbitrary repositories
packfile: add repository argument to cache_or_unpack_entry
packfile: add repository argument to unpack_entry
packfile: add repository argument to read_object
packfile: add repository argument to packed_object_info
packfile: add repository argument to packed_to_object_type
packfile: add repository argument to retry_bad_packed_offset
cache.h: add repository argument to oid_object_info
cache.h: add repository argument to oid_object_info_extended
* maint-2.16:
Git 2.16.4
Git 2.15.2
Git 2.14.4
Git 2.13.7
verify_path: disallow symlinks in .gitmodules
update-index: stat updated files earlier
verify_dotfile: mention case-insensitivity in comment
verify_path: drop clever fallthrough
skip_prefix: add case-insensitive variant
is_{hfs,ntfs}_dotgitmodules: add tests
is_ntfs_dotgit: match other .git files
is_hfs_dotgit: match other .git files
is_ntfs_dotgit: use a size_t for traversing string
submodule-config: verify submodule names as paths
* maint-2.15:
Git 2.15.2
Git 2.14.4
Git 2.13.7
verify_path: disallow symlinks in .gitmodules
update-index: stat updated files earlier
verify_dotfile: mention case-insensitivity in comment
verify_path: drop clever fallthrough
skip_prefix: add case-insensitive variant
is_{hfs,ntfs}_dotgitmodules: add tests
is_ntfs_dotgit: match other .git files
is_hfs_dotgit: match other .git files
is_ntfs_dotgit: use a size_t for traversing string
submodule-config: verify submodule names as paths
* maint-2.14:
Git 2.14.4
Git 2.13.7
verify_path: disallow symlinks in .gitmodules
update-index: stat updated files earlier
verify_dotfile: mention case-insensitivity in comment
verify_path: drop clever fallthrough
skip_prefix: add case-insensitive variant
is_{hfs,ntfs}_dotgitmodules: add tests
is_ntfs_dotgit: match other .git files
is_hfs_dotgit: match other .git files
is_ntfs_dotgit: use a size_t for traversing string
submodule-config: verify submodule names as paths
* maint-2.13:
Git 2.13.7
verify_path: disallow symlinks in .gitmodules
update-index: stat updated files earlier
verify_dotfile: mention case-insensitivity in comment
verify_path: drop clever fallthrough
skip_prefix: add case-insensitive variant
is_{hfs,ntfs}_dotgitmodules: add tests
is_ntfs_dotgit: match other .git files
is_hfs_dotgit: match other .git files
is_ntfs_dotgit: use a size_t for traversing string
submodule-config: verify submodule names as paths
There are a few reasons it's not a good idea to make
.gitmodules a symlink, including:
1. It won't be portable to systems without symlinks.
2. It may behave inconsistently, since Git may look at
this file in the index or a tree without bothering to
resolve any symbolic links. We don't do this _yet_, but
the config infrastructure is there and it's planned for
the future.
With some clever code, we could make (2) work. And some
people may not care about (1) if they only work on one
platform. But there are a few security reasons to simply
disallow it:
a. A symlinked .gitmodules file may circumvent any fsck
checks of the content.
b. Git may read and write from the on-disk file without
sanity checking the symlink target. So for example, if
you link ".gitmodules" to "../oops" and run "git
submodule add", we'll write to the file "oops" outside
the repository.
Again, both of those are problems that _could_ be solved
with sufficient code, but given the complications in (1) and
(2), we're better off just outlawing it explicitly.
Note the slightly tricky call to verify_path() in
update-index's update_one(). There we may not have a mode if
we're not updating from the filesystem (e.g., we might just
be removing the file). Passing "0" as the mode there works
fine; since it's not a symlink, we'll just skip the extra
checks.
Signed-off-by: Jeff King <peff@peff.net>
When we started to catch NTFS short names that clash with .git, we only
looked for GIT~1. This is sufficient because we only ever clone into an
empty directory, so .git is guaranteed to be the first subdirectory or
file in that directory.
However, even with a fresh clone, .gitmodules is *not* necessarily the
first file to be written that would want the NTFS short name GITMOD~1: a
malicious repository can add .gitmodul0000 and friends, which sorts
before `.gitmodules` and is therefore checked out *first*. For that
reason, we have to test not only for ~1 short names, but for others,
too.
It's hard to just adapt the existing checks in is_ntfs_dotgit(): since
Windows 2000 (i.e., in all Windows versions still supported by Git),
NTFS short names are only generated in the <prefix>~<number> form up to
number 4. After that, a *different* prefix is used, calculated from the
long file name using an undocumented, but stable algorithm.
For example, the short name of .gitmodules would be GITMOD~1, but if it
is taken, and all of ~2, ~3 and ~4 are taken, too, the short name
GI7EBA~1 will be used. From there, collisions are handled by
incrementing the number, shortening the prefix as needed (until ~9999999
is reached, in which case NTFS will not allow the file to be created).
We'd also want to handle .gitignore and .gitattributes, which suffer
from a similar problem, using the fall-back short names GI250A~1 and
GI7D29~1, respectively.
To accommodate for that, we could reimplement the hashing algorithm, but
it is just safer and simpler to provide the known prefixes. This
algorithm has been reverse-engineered and described at
https://usn.pw/blog/gen/2015/06/09/filenames/, which is defunct but
still available via https://web.archive.org/.
These can be recomputed by running the following Perl script:
-- snip --
use warnings;
use strict;
sub compute_short_name_hash ($) {
my $checksum = 0;
foreach (split('', $_[0])) {
$checksum = ($checksum * 0x25 + ord($_)) & 0xffff;
}
$checksum = ($checksum * 314159269) & 0xffffffff;
$checksum = 1 + (~$checksum & 0x7fffffff) if ($checksum & 0x80000000);
$checksum -= (($checksum * 1152921497) >> 60) * 1000000007;
return scalar reverse sprintf("%x", $checksum & 0xffff);
}
print compute_short_name_hash($ARGV[0]);
-- snap --
E.g., running that with the argument ".gitignore" will
result in "250a" (which then becomes "gi250a" in the code).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jeff King <peff@peff.net>
This conversion was done without the #define trick used in the earlier
series refactoring to have better repository access, because this function
is easy to review, as all lines are converted and it has only one caller.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This should make these functions easier to find and cache.h less
overwhelming to read.
In particular, this moves:
- read_object_file
- oid_object_info
- write_object_file
As a result, most of the codebase needs to #include object-store.h.
In this patch the #include is only added to files that would fail to
compile otherwise. It would be better to #include wherever
identifiers from the header are used. That can happen later
when we have better tooling for it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have to convert all of the alloc functions at once, because alloc_report
uses a funky macro for reporting. It is better for the sake of mechanical
conversion to convert multiple functions at once rather than changing the
structure of the reporting function.
We record all memory allocation in alloc.c, and free them in
clear_alloc_state, which is called for all repositories except
the_repository.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current document mentions OBJ_* constants without their actual
values. A git developer would know these are from cache.h but that's
not very friendly to a person who wants to read this file to implement
a pack file parser.
Similarly, the deltified representation is not documented at all (the
"document" is basically patch-delta.c). Translate that C code to
English with a bit more about what ofs-delta and ref-delta mean.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a small mechanical change; it doesn't change the
implementation to handle repositories other than the_repository yet.
Use a macro to catch callers passing a repository other than
the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a small mechanical change; it doesn't change the
implementation to handle repositories other than the_repository yet.
Use a macro to catch callers passing a repository other than
the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a small mechanical change; it doesn't change the
implementation to handle repositories other than the_repository yet.
Use a macro to catch callers passing a repository other than
the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a small mechanical change; it doesn't change the
implementation to handle repositories other than the_repository yet.
Use a macro to catch callers passing a repository other than
the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a small mechanical change; it doesn't change the
implementation to handle repositories other than the_repository yet.
Use a macro to catch callers passing a repository other than
the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a small mechanical change; it doesn't change the
implementation to handle repositories other than the_repository yet.
Use a macro to catch callers passing a repository other than
the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a small mechanical change; it doesn't change the
implementation to handle repositories other than the_repository yet.
Use a macro to catch callers passing a repository other than
the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The effort to pass the repository in-core structure throughout the
API continues. This round deals with the code that implements the
refs/replace/ mechanism.
* sb/object-store-replace:
replace-object: allow lookup_replace_object to handle arbitrary repositories
replace-object: allow do_lookup_replace_object to handle arbitrary repositories
replace-object: allow prepare_replace_object to handle arbitrary repositories
refs: allow for_each_replace_ref to handle arbitrary repositories
refs: store the main ref store inside the repository struct
replace-object: add repository argument to lookup_replace_object
replace-object: add repository argument to do_lookup_replace_object
replace-object: add repository argument to prepare_replace_object
refs: add repository argument to for_each_replace_ref
refs: add repository argument to get_main_ref_store
replace-object: check_replace_refs is safe in multi repo environment
replace-object: eliminate replace objects prepared flag
object-store: move lookup_replace_object to replace-object.h
replace-object: move replace_map to object store
replace_object: use oidmap
Precompute and store information necessary for ancestry traversal
in a separate file to optimize graph walking.
* ds/commit-graph:
commit-graph: implement "--append" option
commit-graph: build graph from starting commits
commit-graph: read only from specific pack-indexes
commit: integrate commit graph with commit parsing
commit-graph: close under reachability
commit-graph: add core.commitGraph setting
commit-graph: implement git commit-graph read
commit-graph: implement git-commit-graph write
commit-graph: implement write_commit_graph()
commit-graph: create git-commit-graph builtin
graph: add commit graph design document
commit-graph: add format document
csum-file: refactor finalize_hashfile() method
csum-file: rename hashclose() to finalize_hashfile()
A build-time option has been added to allow Git to be told to refer
to its associated files relative to the main binary, in the same
way that has been possible on Windows for quite some time, for
Linux, BSDs and Darwin.
* dj/runtime-prefix:
Makefile: quote $INSTLIBDIR when passing it to sed
Makefile: remove unused @@PERLLIBDIR@@ substitution variable
mingw/msvc: use the new-style RUNTIME_PREFIX helper
exec_cmd: provide a new-style RUNTIME_PREFIX helper for Windows
exec_cmd: RUNTIME_PREFIX on some POSIX systems
Makefile: add Perl runtime prefix support
Makefile: generate Perl header from template file
There really isn't any case in which we want to expose the constants for
empty trees and blobs outside of using the hash algorithm abstraction.
Make these constants static and stop exposing the defines in cache.h.
Remove the constants which are no longer in use.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Oftentimes, we'll want to refer to an empty tree or empty blob by its
hex name without having to call oid_to_hex or explicitly refer to
the_hash_algo. Add helper functions that format these values into
static buffers and return them for easy use.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust struct index_state to use struct object_id instead of unsigned
char [20].
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the various functions for freshening objects and
has_loose_object_nonlocal to use struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sha1 member in struct pack_entry is unused except for one instance
in which we store a value in it. Since nobody ever reads this value,
don't bother to compute it and remove the member from struct pack_entry.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tree member of struct object_context is unused except in one place
where we write to it. Since there are no users of this member, remove
it.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In various places throughout the codebase, we need to read data into a
struct object_id from a pack or other unsigned char buffer. Add an
inline function that does this based on the current hash algorithm in
use, and use it in several places.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This involves also adapting oid_object_info_extended and a some
internal functions that are used to implement these. It all has to
happen in one patch, because of a single recursive chain of calls visits
all these functions.
oid_object_info_extended is also used in partial clones, which allow
fetching missing objects. As this series will not add the repository
struct to the transport code and fetch_object(), add a TODO note and
omit fetching if a user tries to use a partial clone in a repository
other than the_repository.
Among the functions modified to handle arbitrary repositories,
unpack_entry() is one of them. Note that it still references the globals
"delta_base_cache" and "delta_base_cached", but those are safe to be
referenced (the former is indexed partly by "struct packed_git *", which
is repo-specific, and the latter is only used to limit the size of the
former as an optimization).
Helped-by: Brandon Williams <bmwill@google.com>
Helped-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow the callers of oid_object_info
to be more specific about which repository to handle. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow oid_object_info_extended callers
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some codepaths, including the refs API, get and keep relative
paths, that go out of sync when the process does chdir(2). The
chdir-notify API is introduced to let these codepaths adjust these
cached paths to the new current directory.
* jk/relative-directory-fix:
refs: use chdir_notify to update cached relative paths
set_work_tree: use chdir_notify
add chdir-notify API
trace.c: export trace_setup_key
set_git_dir: die when setenv() fails
An extra field type_valid is added to carry the equivalent of OBJ_BAD
in the original "type" field. in_pack_type always contains a valid
type so we only need 3 bits for it.
A note about accepting OBJ_NONE as "valid" type. The function
read_object_list_from_stdin() can pass this value [1] and it
eventually calls create_object_entry() where current code skip setting
"type" field if the incoming type is zero. This does not have any bad
side effects because "type" field should be memset()'d anyway.
But since we also need to set type_valid now, skipping oe_set_type()
leaves type_valid zero/false, which will make oe_type() return
OBJ_BAD, not OBJ_NONE anymore. Apparently we do care about OBJ_NONE in
prepare_pack(). This switch from OBJ_NONE to OBJ_BAD may trigger
fatal: unable to get type of object ...
Accepting OBJ_NONE [2] does sound wrong, but this is how it is has
been for a very long time and I haven't time to dig in further.
[1] See 5c49c11686 (pack-objects: better check_object() performances -
2007-04-16)
[2] 21666f1aae (convert object type handling from a string to a number
- 2007-02-26)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
lookup_replace_object is a low-level function that most users of the
object store do not need to use directly.
Move it to replace-object.h to avoid a dependency loop in an upcoming
change to its inline definition that will make use of repository.h.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enable Git to resolve its own binary location using a variety of
OS-specific and generic methods, including:
- procfs via "/proc/self/exe" (Linux)
- _NSGetExecutablePath (Darwin)
- KERN_PROC_PATHNAME sysctl on BSDs.
- argv0, if absolute (all, including Windows).
This is used to enable RUNTIME_PREFIX support for non-Windows systems,
notably Linux and Darwin. When configured with RUNTIME_PREFIX, Git will
do a best-effort resolution of its executable path and automatically use
this as its "exec_path" for relative helper and data lookups, unless
explicitly overridden.
Small incidental formatting cleanup of "exec_cmd.c".
Signed-off-by: Dan Jacques <dnj@google.com>
Thanks-to: Robbie Iannucci <iannucci@google.com>
Thanks-to: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactoring the internal global data structure to make it possible
to open multiple repositories, work with and then close them.
Rerolled by Duy on top of a separate preliminary clean-up topic.
The resulting structure of the topics looked very sensible.
* sb/object-store: (27 commits)
sha1_file: allow sha1_loose_object_info to handle arbitrary repositories
sha1_file: allow map_sha1_file to handle arbitrary repositories
sha1_file: allow map_sha1_file_1 to handle arbitrary repositories
sha1_file: allow open_sha1_file to handle arbitrary repositories
sha1_file: allow stat_sha1_file to handle arbitrary repositories
sha1_file: allow sha1_file_name to handle arbitrary repositories
sha1_file: add repository argument to sha1_loose_object_info
sha1_file: add repository argument to map_sha1_file
sha1_file: add repository argument to map_sha1_file_1
sha1_file: add repository argument to open_sha1_file
sha1_file: add repository argument to stat_sha1_file
sha1_file: add repository argument to sha1_file_name
sha1_file: allow prepare_alt_odb to handle arbitrary repositories
sha1_file: allow link_alt_odb_entries to handle arbitrary repositories
sha1_file: add repository argument to prepare_alt_odb
sha1_file: add repository argument to link_alt_odb_entries
sha1_file: add repository argument to read_info_alternates
sha1_file: add repository argument to link_alt_odb_entry
sha1_file: add raw_object_store argument to alt_odb_usable
pack: move approximate object count to object store
...
The commit graph feature is controlled by the new core.commitGraph config
setting. This defaults to 0, so the feature is opt-in.
The intention of core.commitGraph is that a user can always stop checking
for or parsing commit graph files if core.commitGraph=0.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up for the "repository" abstraction.
* nd/remove-ignore-env-field:
repository.h: add comment and clarify repo_set_gitdir
repository: delete ignore_env member
sha1_file.c: move delayed getenv(altdb) back to setup_git_env()
repository.c: delete dead functions
repository.c: move env-related setup code back to environment.c
repository: initialize the_repository in main()
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (36 commits)
convert: convert to struct object_id
sha1_file: introduce a constant for max header length
Convert lookup_replace_object to struct object_id
sha1_file: convert read_sha1_file to struct object_id
sha1_file: convert read_object_with_reference to object_id
tree-walk: convert tree entry functions to object_id
streaming: convert istream internals to struct object_id
tree-walk: convert get_tree_entry_follow_symlinks internals to object_id
builtin/notes: convert static functions to object_id
builtin/fmt-merge-msg: convert remaining code to object_id
sha1_file: convert sha1_object_info* to object_id
Convert remaining callers of sha1_object_info_extended to object_id
packfile: convert unpack_entry to struct object_id
sha1_file: convert retry_bad_packed_offset to struct object_id
sha1_file: convert assert_sha1_type to object_id
builtin/mktree: convert to struct object_id
streaming: convert open_istream to use struct object_id
sha1_file: convert check_sha1_signature to struct object_id
sha1_file: convert read_loose_object to use struct object_id
builtin/index-pack: convert struct ref_delta_entry to object_id
...
A "git fetch" from a repository with insane number of refs into a
repository that is already up-to-date still wasted too many cycles
making many lstat(2) calls to see if these objects at the tips
exist as loose objects locally. These lstat(2) calls are optimized
away by enumerating all loose objects beforehand.
It is unknown if the new strategy negatively affects existing use
cases, fetching into a repository with many loose objects from a
repository with small number of refs.
* ti/fetch-everything-local-optim:
fetch-pack.c: use oidset to check existence of loose object
The set_git_dir() function returns an error if setenv()
fails, but there are zero callers who pay attention to this
return value. If this ever were to happen, it could cause
confusing results, as sub-processes would see a potentially
stale GIT_DIR (e.g., if it is relative and we chdir()-ed to
the root of the working tree).
We _could_ try to fix each caller, but there's really
nothing useful to do after this failure except die. Let's
just lump setenv() failure into the same category as malloc
failure: things that should never happen and cause us to
abort catastrophically.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow map_sha1_file callers to be more
specific about which repository to handle. This is a small mechanical
change; it doesn't change the implementation to handle repositories
other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
While at it, move the declaration to object-store.h, where it should
be easier to find.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow sha1_file_name callers to be more
specific about which repository to handle. This is a small mechanical
change; it doesn't change the implementation to handle repositories
other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
While at it, move the declaration to object-store.h, where it should
be easier to find.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a process with multiple repositories open, packfile accessors
should be associated to a single repository and not shared globally.
Move packed_git and packed_git_mru into the_repository and adjust
callers to reflect this.
[nd: while at there, wrap access to these two fields in get_packed_git()
and get_packed_git_mru(). This allows us to lazily initialize these
fields without caller doing that explicitly]
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Migrate the struct alternate_object_database and all its related
functions to the object store as these functions are easier found in
that header. The migration is just a verbatim copy, no need to
include the object store header at any C file, because cache.h includes
repository.h which in turn includes the object-store.h
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The split-index mode had a few corner case bugs fixed.
* tg/split-index-fixes:
travis: run tests with GIT_TEST_SPLIT_INDEX
split-index: don't write cache tree with null oid entries
read-cache: fix reading the shared index for other repos
Internal API clean-up to allow write_locked_index() optionally skip
writing the in-core index when it is not modified.
* ma/skip-writing-unchanged-index:
write_locked_index(): add flag to avoid writing unchanged index
When fetching from a repository with large number of refs, because to
check existence of each refs in local repository to packed and loose
objects, 'git fetch' ends up doing a lot of lstat(2) to non-existing
loose form, which makes it slow.
Instead of making as many lstat(2) calls as the refs the remote side
advertised to see if these objects exist in the loose form, first
enumerate all the existing loose objects in hashmap beforehand and use
it to check existence of them if the number of refs is larger than the
number of loose objects.
With this patch, the number of lstat(2) calls in `git fetch` is reduced
from 411412 to 13794 for chromium repository, it has more than 480000
remote refs.
I took time stat of `git fetch` when fetch-pack happens for chromium
repository 3 times on linux with SSD.
* with this patch
8.105s
8.309s
7.640s
avg: 8.018s
* master
12.287s
11.175s
12.227s
avg: 11.896s
On my MacBook Air which has slower lstat(2).
* with this patch
14.501s
* master
1m16.027s
`git fetch` on slow disk will be improved largely.
Signed-off-by: Takuto Ikuta <tikuta@chromium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert both the argument and the return value to be pointers to struct
object_id. Update the callers and their internals to deal with the new
type. Remove several temporaries which are no longer needed.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert read_sha1_file to take a pointer to struct object_id and rename
it read_object_file. Do the same for read_sha1_file_extended.
Convert one use in grep.c to use the new function without any other code
change, since the pointer being passed is a void pointer that is already
initialized with a pointer to struct object_id. Update the declaration
and definitions of the modified functions, and apply the following
semantic patch to convert the remaining callers:
@@
expression E1, E2, E3;
@@
- read_sha1_file(E1.hash, E2, E3)
+ read_object_file(&E1, E2, E3)
@@
expression E1, E2, E3;
@@
- read_sha1_file(E1->hash, E2, E3)
+ read_object_file(E1, E2, E3)
@@
expression E1, E2, E3, E4;
@@
- read_sha1_file_extended(E1.hash, E2, E3, E4)
+ read_object_file_extended(&E1, E2, E3, E4)
@@
expression E1, E2, E3, E4;
@@
- read_sha1_file_extended(E1->hash, E2, E3, E4)
+ read_object_file_extended(E1, E2, E3, E4)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
