"Work tree" or "working tree" is the name of a checked out tree,
"worktree" the name of the command which manages several working trees.
The naming of tests mixes these two, currently:
$ls t/*worktree*
t/t1501-worktree.sh
t/t1509-root-worktree.sh
t/t2025-worktree-add.sh
t/t2026-worktree-prune.sh
t/t2027-worktree-list.sh
t/t2104-update-index-skip-worktree.sh
t/t3320-notes-merge-worktrees.sh
t/t7011-skip-worktree-reading.sh
t/t7012-skip-worktree-writing.sh
t/t7409-submodule-detached-worktree.sh
$grep -l "git worktree" t/*.sh
t/t0002-gitfile.sh
t/t1400-update-ref.sh
t/t2025-worktree-add.sh
t/t2026-worktree-prune.sh
t/t2027-worktree-list.sh
t/t3320-notes-merge-worktrees.sh
t/t7410-submodule-checkout-to.sh
Rename t1501, t1509 and t7409 to make it clear on first glance that they
test work tree related behavior, rather than the worktree command.
t2104, t7011 and t7012 are about the "skip-worktree" flag so that their
name should remain unchanged.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, libcurl will follow circular http redirects
forever. Let's put a cap on this so that somebody who can
trigger an automated fetch of an arbitrary repository (e.g.,
for CI) cannot convince git to loop infinitely.
The value chosen is 20, which is the same default that
Firefox uses.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, libcurl would follow redirection to any protocol
it was compiled for support with. This is desirable to allow
redirection from HTTP to HTTPS. However, it would even
successfully allow redirection from HTTP to SFTP, a protocol
that git does not otherwise support at all. Furthermore
git's new protocol-whitelisting could be bypassed by
following a redirect within the remote helper, as it was
only enforced at transport selection time.
This patch limits redirects within libcurl to HTTP, HTTPS,
FTP and FTPS. If there is a protocol-whitelist present, this
list is limited to those also allowed by the whitelist. As
redirection happens from within libcurl, it is impossible
for an HTTP redirect to a protocol implemented within
another remote helper.
When the curl version git was compiled with is too old to
support restrictions on protocol redirection, we warn the
user if GIT_ALLOW_PROTOCOL restrictions were requested. This
is a little inaccurate, as even without that variable in the
environment, we would still restrict SFTP, etc, and we do
not warn in that case. But anything else means we would
literally warn every time git accesses an http remote.
This commit includes a test, but it is not as robust as we
would hope. It redirects an http request to ftp, and checks
that curl complained about the protocol, which means that we
are relying on curl's specific error message to know what
happened. Ideally we would redirect to a working ftp server
and confirm that we can clone without protocol restrictions,
and not with them. But we do not have a portable way of
providing an ftp server, nor any other protocol that curl
supports (https is the closest, but we would have to deal
with certificates).
[jk: added test and version warning]
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some protocols (like git-remote-ext) can execute arbitrary
code found in the URL. The URLs that submodules use may come
from arbitrary sources (e.g., .gitmodules files in a remote
repository). Let's restrict submodules to fetching from a
known-good subset of protocols.
Note that we apply this restriction to all submodule
commands, whether the URL comes from .gitmodules or not.
This is more restrictive than we need to be; for example, in
the tests we run:
git submodule add ext::...
which should be trusted, as the URL comes directly from the
command line provided by the user. But doing it this way is
simpler, and makes it much less likely that we would miss a
case. And since such protocols should be an exception
(especially because nobody who clones from them will be able
to update the submodules!), it's not likely to inconvenience
anyone in practice.
Reported-by: Blake Burkhart <bburky@bburky.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we are cloning an untrusted remote repository into a
sandbox, we may also want to fetch remote submodules in
order to get the complete view as intended by the other
side. However, that opens us up to attacks where a malicious
user gets us to clone something they would not otherwise
have access to (this is not necessarily a problem by itself,
but we may then act on the cloned contents in a way that
exposes them to the attacker).
Ideally such a setup would sandbox git entirely away from
high-value items, but this is not always practical or easy
to set up (e.g., OS network controls may block multiple
protocols, and we would want to enable some but not others).
We can help this case by providing a way to restrict
particular protocols. We use a whitelist in the environment.
This is more annoying to set up than a blacklist, but
defaults to safety if the set of protocols git supports
grows). If no whitelist is specified, we continue to default
to allowing all protocols (this is an "unsafe" default, but
since the minority of users will want this sandboxing
effect, it is the only sensible one).
A note on the tests: ideally these would all be in a single
test file, but the git-daemon and httpd test infrastructure
is an all-or-nothing proposition rather than a test-by-test
prerequisite. By putting them all together, we would be
unable to test the file-local code on machines without
apache.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The experimental untracked-cache feature were buggy when paths with
a few levels of subdirectories are involved.
* dt/untracked-subdir:
untracked cache: fix entry invalidation
untracked-cache: fix subdirectory handling
t7063: use --force-untracked-cache to speed up a bit
untracked-cache: support sparse checkout
"git init empty && git -C empty log" said "bad default revision 'HEAD'",
which was found to be a bit confusing to new users.
* jk/log-missing-default-HEAD:
log: diagnose empty HEAD more clearly
The "interpret-trailers" helper mistook a multi-paragraph title of
a commit log message with a colon in it as the end of the trailer
block.
* cc/trailers-corner-case-fix:
trailer: support multiline title
trailer: retitle a test and correct an in-comment message
trailer: ignore first line of message
When re-priming the cache-tree opportunistically while committing
the in-core index as-is, we mistakenly invalidated the in-core
index too aggressively, causing the experimental split-index code
to unnecessarily rewrite the on-disk index file(s).
* dt/commit-preserve-base-index-upon-opportunistic-cache-tree-update:
commit: don't rewrite shared index unnecessarily
"git archive" did not use zip64 extension when creating an archive
with more than 64k entries, which nobody should need, right ;-)?
* rs/archive-zip-many:
archive-zip: support more than 65535 entries
archive-zip: use a local variable to store the creator version
t5004: test ZIP archives with many entries
Because the configuration system does not allow "alias.0foo" and
"pager.0foo" as the configuration key, the user cannot use '0foo'
as a custom command name anyway, but "git 0foo" tried to look these
keys up and emitted useless warnings before saying '0foo is not a
git command'. These warning messages have been squelched.
* jk/fix-alias-pager-config-key-warnings:
config: silence warnings for command names with invalid keys
t1509 test that requires a dedicated VM environment had some
bitrot, which has been corrected.
* ps/t1509-chroot-test-fixup:
tests: fix cleanup after tests in t1509-root-worktree
tests: fix broken && chains in t1509-root-worktree
We currently ignore the first line passed to `git interpret-trailers`,
when looking for the beginning of the trailers.
Unfortunately this does not work well when a commit is created with a
line break in the title, using for example the following command:
git commit -m 'place of
code: change we made'
That's why instead of ignoring only the first line, it is better to
ignore the first paragraph.
Signed-off-by: Christian Couder <christian.couder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While we are here, remove some boilerplate by using test_commit.
Signed-off-by: Erik Elfström <erik.elfstrom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you init or clone an empty repository, the initial
message from running "git log" is not very friendly:
$ git init
Initialized empty Git repository in /home/peff/foo/.git/
$ git log
fatal: bad default revision 'HEAD'
Let's detect this situation and write a more friendly
message:
$ git log
fatal: your current branch 'master' does not have any commits yet
We also detect the case that 'HEAD' points to a broken ref;
this should be even less common, but is easy to see. Note
that we do not diagnose all possible cases. We rely on
resolve_ref, which means we do not get information about
complex cases. E.g., "--default master" would use dwim_ref
to find "refs/heads/master", but we notice only that
"master" does not exist. Similarly, a complex sha1
expression like "--default HEAD^2" will not resolve as a
ref.
But that's OK. We fall back to a generic error message in
those cases, and they are unlikely to be used anyway.
Catching an empty or broken "HEAD" improves the common case,
and the other cases are not regressed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove a cache invalidation which would cause the shared index to be
rewritten on as-is commits.
When the cache-tree has changed, we need to update it. But we don't
necessarily need to update the shared index. So setting
active_cache_changed to SOMETHING_CHANGED is unnecessary. Instead, we
let update_main_cache_tree just update the CACHE_TREE_CHANGED bit.
In order to test this, make test-dump-split-index not segfault on
missing replace_bitmap/delete_bitmap. This new codepath is not called
now that the test passes, but is necessary to avoid a segfault when the
new test is run with the old builtin/commit.c code.
Signed-off-by: David Turner <dturner@twopensource.com>
Acked-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support more than 65535 entries cleanly by writing a "zip64 end of
central directory record" (with a 64-bit field for the number of
entries) before the usual "end of central directory record" (which
contains only a 16-bit field). InfoZIP's zip does the same.
Archives with 65535 or less entries are not affected.
Programs that extract all files like InfoZIP's zip and 7-Zip
ignored the field and could extract all files already. Software
that relies on the ZIP file directory to show a list of contained
files quickly to simulate to normal directory like Windows'
built-in ZIP functionality only saw a subset of the included files.
Windows supports ZIP64 since Vista according to
https://en.wikipedia.org/wiki/Zip_%28file_format%29#ZIP64.
Suggested-by: Johannes Schauer <josch@debian.org>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A ZIP file directory has a 16-bit field for the number of entries it
contains. There are 64-bit extensions to deal with that. Demonstrate
that git archive --format=zip currently doesn't use them and instead
overflows the field.
InfoZIP's unzip doesn't care about this field and extracts all files
anyway. Software that uses the directory for presenting a filesystem
like view quickly -- notably Windows -- depends on it, but doesn't
lend itself to an automatic test case easily. Use InfoZIP's zipinfo,
which probably isn't available everywhere but at least can provides
*some* way to check this field.
To speed things up a bit create and commit only a subset of the files
and build a fake tree out of duplicates and pass that to git archive.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone $URL" in recent releases of Git contains a regression in
the code that invents a new repository name incorrectly based on
the $URL. This has been corrected.
* jk/guess-repo-name-regression-fix:
clone: use computed length in guess_dir_name
clone: add tests for output directory
Running tests with the "-x" option to make them verbose had some
unpleasant interactions with other features of the test suite.
* jk/test-with-x:
test-lib: disable trace when test is not verbose
test-lib: turn off "-x" tracing during chain-lint check
When we are running the git command "foo", we may have to
look up the config keys "pager.foo" and "alias.foo". These
config schemes are mis-designed, as the command names can be
anything, but the config syntax has some restrictions. For
example:
$ git foo_bar
error: invalid key: pager.foo_bar
error: invalid key: alias.foo_bar
git: 'foo_bar' is not a git command. See 'git --help'.
You cannot name an alias with an underscore. And if you have
an external command with one, you cannot configure its
pager.
In the long run, we may develop a different config scheme
for these features. But in the near term (and because we'll
need to support the existing scheme indefinitely), we should
at least squelch the error messages shown above.
These errors come from git_config_parse_key. Ideally we
would pass a "quiet" flag to the config machinery, but there
are many layers between the pager code and the key parsing.
Passing a flag through all of those would be an invasive
change.
Instead, let's provide a config function to report on
whether a key is syntactically valid, and have the pager and
alias code skip lookup for bogus keys. We can build this
easily around the existing git_config_parse_key, with two
minor modifications:
1. We now handle a NULL store_key, to validate but not
write out the normalized key.
2. We accept a "quiet" flag to avoid writing to stderr.
This doesn't need to be a full-blown public "flags"
field, because we can make the existing implementation
a static helper function, keeping the mess contained
inside config.c.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When looking for the start of the trailers in the message
we are passed, we should ignore the first line of the message.
The reason is that if we are passed a patch or commit message
then the first line should be the patch title.
If we are passed only trailers we can expect that they start
with an empty line that can be ignored too.
This way we can properly process commit messages that have
only one line with something that looks like a trailer, for
example like "area of code: change we made".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running an aliased command from a subdirectory when the .git thing
in the working tree is a gitfile pointing elsewhere did not work.
* nd/export-worktree:
setup: set env $GIT_WORK_TREE when work tree is set, like $GIT_DIR
The "rev-parse --parseopt" mode parsed the option specification
and the argument hint in a strange way to allow '=' and other
special characters in the option name while forbidding them from
the argument hint. This made it impossible to define an option
like "--pair <key>=<value>" with "pair=key=value" specification,
which instead would have defined a "--pair=key <value>" option.
* ib/scripted-parse-opt-better-hint-string:
rev-parse --parseopt: allow [*=?!] in argument hints
"sparse checkout" misbehaved for a path that is excluded from the
checkout when switching between branches that differ at the path.
* as/sparse-checkout-removal:
unpack-trees: don't update files with CE_WT_REMOVE set
First, the current code in untracked_cache_invalidate_path() is wrong
because it can only handle paths "a" or "a/b", not "a/b/c" because
lookup_untracked() only looks for entries directly under the given
directory. In the last case, it will look for the entry "b/c" in
directory "a" instead. This means if you delete or add an entry in a
subdirectory, untracked cache may become out of date because it does not
invalidate properly. This is noticed by David Turner.
The second problem is about invalidation inside a fully untracked/excluded
directory. In this case we may have to invalidate back to root. See the
comment block for detail.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, some calls lookup_untracked would pass a full path. But
lookup_untracked assumes that the portion of the path up to and
including to the untracked_cache_dir has been removed. So
lookup_untracked would be looking in the untracked_cache for 'foo' for
'foo/bar' (instead of just looking for 'bar'). This would cause
untracked cache corruption.
Instead, treat_directory learns to track the base length of the parent
directory, so that only the last path component is passed to
lookup_untracked.
Helped-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When in the middle of t7063, we are sure untracked cache is supported,
so we can use --force-untracked-cache to skip the support detection
phase and save a few seconds. It's also good that --force-untracked-cache
is exercised in the test suite.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A test case introduced by ae454f61 (Add tests for wildcard "path vs ref"
disambiguation) allocates a file named '*.c'. This does not work on
Windows, because the OS forbids file names containing wildcard
characters. The test case fails where the shell attempts to allocate the
file. Skip the test on Windows.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 7e837c6 (clone: simplify string handling in
guess_dir_name(), 2015-07-09) changed clone to use
strip_suffix instead of hand-rolled pointer manipulation.
However, strip_suffix will strip from the end of a
NUL-terminated string, and we may have already stripped some
characters (like directory separators, or "/.git"). This
leads to commands like:
git clone host:foo.git/
failing to strip the ".git".
We must instead convert our pointer arithmetic into a
computed length and feed that to strip_suffix_mem, which will
then reduce the length further for us.
It would be nicer if we could drop the pointer manipulation
entirely, and just continually strip using strip_suffix. But
that doesn't quite work for two reasons:
1. The early suffixes we're stripping are not constant; we
need to look for is_dir_sep, which could be one of
several characters.
2. Mid-way through the stripping we compute the pointer
"start", which shows us the beginning of the pathname.
Which really give us two lengths to work with: the
offset from the start of the string, and from the start
of the path. By using pointers for the early part, we
can just compute the length from "start" when we need
it.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we run "git clone $url", clone guesses from the $url
what to name the local output directory. We don't have any
test coverage of this, so let's add some basic tests.
This reveals a few problems:
- cloning "foo.git/" does not properly remove the ".git";
this is a recent regression from 7e837c6 (clone:
simplify string handling in guess_dir_name(), 2015-07-09)
- likewise, cloning foo/.git does not seem to handle the
bare case (we should end up in foo.git, but we try to
use foo/.git on the local end), which also comes from
7e837c6.
- cloning the root is not very smart about URL parsing,
and usernames and port numbers may end up in the
directory name
All of these tests are marked as failures.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "-x" test-script option turns on the shell's "-x"
tracing, which can help show why a particular test is
failing. Unfortunately, this can create false negatives in
some tests if they invoke a shell function with its stderr
redirected. t5512.10 is such a test, as it does:
test_must_fail git ls-remote refs*master >actual 2>&1 &&
test_cmp exp actual
The "actual" file gets the "-x" trace for the test_must_fail
function, which prevents it from matching the expected
output.
There's no way to avoid this without managing the
trace flag inside each sub-function, which isn't really a
workable solution. But unless you specifically care about
t5512.10, we can work around it by enabling tracing only for
the specific tests we want.
You can already do:
./t5512-ls-remote.sh -x --verbose-only=16
to see the trace only for a specific test. But that doesn't
_disable_ the tracing in the other tests; it just sends it
to /dev/null. However, there's no point in generating a
trace that the user won't see, so we can simply disable
tracing whenever it doesn't have a matching verbose flag.
The normal case of just "./t5512-ls-remote.sh -x" stays the
same, as "-x" already implies "--verbose" (and
"--verbose-only" overrides "--verbose", which is why this
works at all). And for our test, we need only check
$verbose, as maybe_setup_verbose will have already
set that flag based on the $verbose_only list).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that GIT_TEST_CHAIN_LINT is on by default, running:
./t0000-basic.sh -x --verbose-only=1
starts with:
expecting success:
find .git/objects -type f -print >should-be-empty &&
test_line_count = 0 should-be-empty
+ exit 117
error: last command exited with $?=117
+ find .git/objects -type f -print
+ test_line_count = 0 should-be-empty
+ test 3 != 3
+ wc -l
+ test 0 = 0
ok 1 - .git/objects should be empty after git init in an empty repo
This is confusing, as the "exit 117" line and the error line
(which is printed in red, no less!) are not part of the test
at all, but are rather in the separate chain-lint test_eval.
Let's unset the "trace" variable when eval-ing the chain
lint check, which avoids this.
Note that we cannot just do a one-shot variable like:
trace= test_eval ...
as the behavior of one-shot variables for function calls
is not portable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During cleanup we do a simple 'rm /*' to remove leftover files
from previous tests. As 'rm' errors out when there is anything it
cannot delete and there are directories present at '/' it will
throw an error, causing the '&&' chain to fail.
Fix this by explicitly removing the files.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Abandoning an already applied change in "git rebase -i" with
"--continue" left CHERRY_PICK_HEAD and confused later steps.
* js/rebase-i-clean-up-upon-continue-to-skip:
rebase -i: do not leave a CHERRY_PICK_HEAD file behind
t3404: demonstrate CHERRY_PICK_HEAD bug
Various fixes around "git am" that applies a patch to a history
that is not there yet.
* pt/am-abort-fix:
am --abort: keep unrelated commits on unborn branch
am --abort: support aborting to unborn branch
am --abort: revert changes introduced by failed 3way merge
am --skip: support skipping while on unborn branch
am -3: support 3way merge on unborn branch
am --skip: revert changes introduced by failed 3way merge
"git for-each-ref" reported "missing object" for 0{40} when it
encounters a broken ref. The lack of object whose name is 0{40} is
not the problem; the ref being broken is.
* mh/reporting-broken-refs-from-for-each-ref:
read_loose_refs(): treat NULL_SHA1 loose references as broken
read_loose_refs(): simplify function logic
for-each-ref: report broken references correctly
t6301: new tests of for-each-ref error handling
"git commit --cleanup=scissors" was not careful enough to protect
against getting fooled by a line that looked like scissors.
* sg/commit-cleanup-scissors:
commit: cope with scissors lines in commit message
Remove a check that would disable the untracked cache for sparse
checkouts. Add tests that ensure that the untracked cache works with
sparse checkouts -- specifically considering the case that a file
foo/bar is checked out, but foo/.gitignore is not.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A minor bugfix when pack bitmap is used with "rev-list --count".
* jk/rev-list-no-bitmap-while-pruning:
rev-list: disable --use-bitmap-index when pruning commits
An ancient test framework enhancement to allow color was not
entirely correct; this makes it work even when tput needs to read
from the ~/.terminfo under the user's real HOME directory.
* rh/test-color-avoid-terminfo-in-original-home:
test-lib.sh: fix color support when tput needs ~/.terminfo
Revert "test-lib.sh: do tests for color support after changing HOME"
This reverts commit d96a275b91.
It used to be possible to apply a patch series with "git am mbox"
and then only after seeing a failure, switch to three-way mode via
"git am -3" (no other options or arguments). The commit being
reverted broke this workflow.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
