An earlier commit a9cb3c6e changed git-commit to use the
contents of MERGE_MSG even when we do not have MERGE_HEAD (the
rationale is in its log message).
However, the change tricks the following sequence to include a
merge message in a completely unrelated commit:
$ git pull somewhere
: oops, the conflicts are too much. forget it.
$ git reset --hard
: work work work
$ git commit
To fix this confusion, this patch makes "git reset" to remove
the leftover MERGE_MSG that was prepared when the user abandoned
the merge.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Acked-by: Luben Tuikov <ltuikov@yahoo.com
Now merge-file also understands --stdout and --quiet options. While
at it, two compile warnings were fixed.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
merge-file has the same syntax as RCS merge, but supports only the
"-L" option.
For good measure, a test is added, which is quite minimal, though.
[jc: further fix for compliation errors included.]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Rename the section titles to make the "how-to" content of the section
obvious. Also clarify that changes have to be commited before they can
be pushed.
Signed-off-by: Junio C Hamano <junkio@cox.net>
It really is an important concept to grasp for people coming
from CVS. Even if it is briefly mentioned, it is not obvious
enough to sink in.
[jc: with wording updates from J. Bruce Fields]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This changes the signature of rename_ref() in refs.[hc] to include a
logmessage for the reflogs.
Also, builtin-branch.c is modified to provide a proper logmessage + call
setup_ident() before any logmessages are written.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The current check for symlinked reflogs was based on stat(2), which is
utterly embarrassing.
Fix it, and add a matching testcase.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Extend git-branch with the following options:
git-branch -m|-M [<oldbranch>] newbranch
The -M variation is required to force renaming over an exsisting
branchname.
This also indroduces $GIT_DIR/RENAME_REF which is a "metabranch"
used when renaming branches. It will always hold the original sha1
for the latest renamed branch.
Additionally, if $GIT_DIR/logs/RENAME_REF exists, all branch rename
events are logged there.
Finally, some testcases are added to verify the new options.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This uses the previous update to read-tree in Porcelain-ish
commands "git checkout" and "git merge" to loosen the check
when switching branches.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This follows up commit ed93b449 where we removed overcautious
"working file will be lost" check.
A new option "--exclude-per-directory=.gitignore" can be used to
tell the "git-read-tree" command that the user does not mind
losing contents in untracked files in the working tree, if they
need to be overwritten by a merge (either a two-way "switch
branches" merge, or a three-way merge).
Signed-off-by: Junio C Hamano <junkio@cox.net>
Suppose you have changes in new1 to the original lines 10-20,
and changes in new2 to the original lines 15-25, then the
changes to 10-25 conflict. But it is possible that the next
changes in new1 still overlap with this change to new2.
So, in the next iteration we have to look at the same change
to new2 again.
The old code tried to be a bit too clever. The new code is
shorter and more to the point: do not fiddle with the ranges
at all.
Also, xdl_append_merge() tries harder to combine conflicts.
This is necessary, because with the above simplification,
some conflicts would not be recognized as conflicts otherwise:
In the above scenario, it is possible that there is no other
change to new1. Absent the combine logic, the change in new2
would be recorded _again_, but as a non-conflict.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
This brings the power of the index up front using a proper mental model
without talking about the index at all. See for example how all the
technical discussion has been evacuated from the git-add man page.
Any content to be committed must be added together. Whether that
content comes from new files or modified files doesn't matter. You
just need to "add" it, either with git-add, or by providing
git-commit with -a (for already known files only of course).
No need for a separate command to distinguish new vs modified files
please. That would only screw the mental model everybody should have
when using GIT.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Document git diff options -b / --ignore-space-change and
-w / --ignore-all-space, introduced by Johannes Schindelin
in commit 0d21efa5, "Teach diff about -b and -w flags".
The description of options is taken from GNU diff man page and
GNU Diffutils info documentation.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is _not_ the same as "treat eol as whitespace", since that would mean
that multiple empty lines would be treated as equal to e.g. a space.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
receive-pack: do not insist on fast-forward outside refs/heads/
git-mv: search more precisely for source directory in index
Conflicts:
receive-pack.c
The structure that ends with a flexible array member (or 0
length array with older GCC) "char name[FLEX_ARRAY]" is
allocated on the stack and we use it after clearing its entire
size with memset. That does not guarantee that "name" is
properly NUL terminated as we intended on platforms with more
forgiving structure alignment requirements.
Reported breakage on m68k by Roman Zippel.
Signed-off-by: Junio C Hamano <junkio@cox.net>
There was a little bug in the brace expansion which should remove
the ^{} from the tagname. It used ${name#'^{}'} instead of $(name%'^{}'},
the difference is that '#' will remove the given pattern only from the
beginning of a string and '%' only from the end of a string.
Signed-off-by: Michael Loeffler <zvpunry@zvpunry.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With making --use-separate-remote default when creating non-bare
clone, there was need for the flag which would turn off this behavior.
It was called --use-immingled-remote.
Immingle means to blend, to combine into one, to intermingle, but it
is a bit obscure word. I think it would be better to use simply
--no-separate-remote as the opposite to --use-separate-remote
option to git clone.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix contents of Atom feed <logo> element; it should be URL
of $logo, not URL pointed by logo link.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
On Cygwin + ActivateState Perl, Makefile generated with
MakeMaker is not usable because of line-endings and
back-slashes.
This teaches perl/Makefile to write a handcrafted equivalent
perl.mak file with 'make NO_PERL_MAKEMAKER=NoThanks'.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Linus recommended this, otherwise any renames cause the
diffstat output to be ridiculous in some circumstances.
Because the corresponding "git-pull" done when the requestee
actually makes pull shows the stat with rename detection
enabled, it makes sense to match what the request message
includes to that output, to make the result easier to verify.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Otherwise, an executable script in git would end up being
checked into the CVS repository without the execute bit.
[jc: with an additional test script from Robin Rosenberg.]
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
A move of a directory should find the entries in the index by
searching for the name _including_ the slash. Otherwise, the
directory can be shadowed by a file when it matches the prefix
and is lexicographically smaller, e.g. "ab.c" shadows "ab/".
Noticed by Sergey Vlasov.
[jc: added Sergey's original reproduction recipe as a test case
at the end of t7001.]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If one side's block (of changed lines) ends later than the other
side's block, the former should be tested against the next block
of the other side, not vice versa.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The line range is i1 .. (i1 + chg1 - 1), not i1 .. (i1 + chg1).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The callers would want to know if the resulting merge is clean;
do not discard that information away after calling xdl_do_merge().
Signed-off-by: Junio C Hamano <junkio@cox.net>
This new function implements the functionality of RCS merge, but
in-memory. It returns < 0 on error, otherwise the number of conflicts.
Finding the conflicting lines can be a very expensive task. You can
control the eagerness of this algorithm:
- a level value of 0 means that all overlapping changes are treated
as conflicts,
- a value of 1 means that if the overlapping changes are identical,
it is not treated as a conflict.
- If you set level to 2, overlapping changes will be analyzed, so that
almost identical changes will not result in huge conflicts. Rather,
only the conflicting lines will be shown inside conflict markers.
With each increasing level, the algorithm gets slower, but more accurate.
Note that the code for level 2 depends on the simple definition of
mmfile_t specific to git, and therefore it will be harder to port that
to LibXDiff.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
SVN is not entirely consistent in returning log information and
sometimes returns file information when adding subdirectories,
and sometimes it does not (only returning information about the
directory that was added). This caused git-svn to occasionally
add a file to the list of files to be fetched twice. Now we
change the data structure to be hash to avoid repeated fetches.
As of now (in master), this only affects repositories fetched
without deltas enabled (file://, and when manually overriden
with GIT_SVN_DELTA_FETCH=0); so this bug mainly affects users of
1.4.4.1 and maint.
Thanks to Florian Weimer for reporting this bug.
[jc: backported for maint]
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In a repository with core.warnambiguousrefs turned off, and with
a branch and a tag that have the same name 'frotz',
git merge frotz
would merge the commit pointed at by the tag 'frotz' but
incorrectly would identify what was merged as 'branch frotz' in
the merge message.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The fact that git has previously used symbolic links for representing
symbolic refs doesn't seem relevant to the current function of
git-symbolic-ref. This patch makes less of a big deal about the
symbolic link history and instead focuses on what git does now.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
'git diff --cached' still works, but its use is discouraged
in the documentation. 'git diff --index' does the same thing
and is consistent with how 'git apply --index' works.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Without this patch "git commit file.c file2.c" produces the not
so stellar output:
error: pathspec 'file.c' did not match any.
error: pathspec 'file2.c' did not match any.
With this patch, the output is changed to:
error: pathspec 'file.c' did not match any file(s) known to git.
error: pathspec 'file2.c' did not match any file(s) known to git.
Did you forget to 'git add'?
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The final 'nr_result' and 'written' values must always be the same
otherwise we're in deep trouble. So let's remove a redundent report.
And for paranoia sake let's make sure those two variables are actually
equal after all objects are written (one never knows).
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* branch 'maint':
Document git-repo-config --bool/--int options.
tutorial: talk about user.name early and don't start with commit -a
git-blame: fix rev parameter handling.
Introducing yourself to git early would be a good idea; otherwise
the user may not find the mistake until much later when "git log"
is learned.
Teaching "commit -a" without saying that it is a shortcut for
listing the paths to commit leaves the user puzzled. Teach the
form with explicit paths first.
Signed-off-by: Junio C Hamano <junkio@cox.net>
We lacked "--" termination in the underlying init_revisions() call
which made it impossible to specify a revision that happens to
have the same name as an existing file.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/globfetch:
fetch-pack: do not barf when duplicate re patterns are given
git-fetch: allow forcing glob pattern in refspec
git-fetch: allow glob pattern in refspec
git-fetch: fix dumb protocol transport to fetch from pack-pruned ref
git-fetch: reuse ls-remote result.
We used to get the case that more than two paths came from the
same commit wrong when computing the output width and deciding
to turn on --show-name option automatically. When we find that
lines that came from a path that is different from what we
started digging from, we should always turn --show-name on, and
we should count the name length for all files involved.
Signed-off-by: Junio C Hamano <junkio@cox.net>
After the bugfix to connect to repositories where the user has
limited read permissions, multi-init was broken due to our
SVN::Ra connection being limited to working in a subdirectory;
so we now create a new Ra connection for init-ing branches
and another for tags
Along with that fix, allow the user to use the command-line
option flags for multi-init (--revision being the most notable;
but also --no-auth-cache, --config-dir, --username (for passing
to SVN), and --shared/--template for passing to git-init-db
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Eliminate 'commit' from some places and plug 'dcommit' more.
Also update the section --id (GIT_SVN_ID) usage since we
have multi-init/multi-fetch now.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* match LESS environment settings to those in pager.c
* parse diff.color and pager.color settings in the
config file, and pass --color to git-log
* --color and --pager= settings are supported
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Also remove asterisks for readability, and suggest use of
git-config for easy cut & pasting.
Signed-off-by: Han-Wen Nienhuys <hanwen@xs4all.nl>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Commit 35e65ecc broke completion of local refs, e.g. "git pull . fo<tab>"
no longer would complete to "foo". Instead it printed out an internal
git error ("fatal: Not a git repository: '.'").
The break occurred when I tried to improve performance by switching from
git-peek-remote to git-for-each-ref. Apparently git-peek-remote will
drop into directory "$1/.git" (where $1 is its first parameter) if it
is given a repository with a working directory. This allowed the bash
completion code to work properly even though it was not handing over
the true repository directory.
So now we do a stat in bash to see if we need to add "/.git" to the
path string before running any command with --git-dir.
I also tried to optimize away two "git rev-parse --git-dir" invocations
in common cases like "git log fo<tab>" as typically the user is in the
top level directory of their project and therefore the .git subdirectory
is in the current working directory. This should make a difference on
systems where fork+exec might take a little while.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
