Commit b81401c taught the post_rpc function to retry the
http request after prompting for credentials. However, it
did not handle two cases:
1. If we have a large request, we do not retry. That's OK,
since we would have sent a probe (with retry) already.
2. If we are gzipping the request, we do not retry. That
was considered OK, because the intended use was for
push (e.g., listing refs is OK, but actually pushing
objects is not), and we never gzip on push.
This patch teaches post_rpc to retry even a gzipped request.
This has two advantages:
1. It is possible to configure a "half-auth" state for
fetching, where the set of refs and their sha1s are
advertised, but one cannot actually fetch objects.
This is not a recommended configuration, as it leaks
some information about what is in the repository (e.g.,
an attacker can try brute-forcing possible content in
your repository and checking whether it matches your
branch sha1). However, it can be slightly more
convenient, since a no-op fetch will not require a
password at all.
2. It future-proofs us should we decide to ever gzip more
requests.
Signed-off-by: Jeff King <peff@peff.net>
When we gzip the post data for a smart-http rpc request, we
compute the gzip body and its size inside the "use_gzip"
conditional. We keep track of the body after the conditional
ends, but not the size. Let's remember both, which will
enable us to retry failed gzip requests in a future patch.
Signed-off-by: Jeff King <peff@peff.net>
This fixes the vast majority of test failures on HP NonStop.
Some test don't work with /bin/diff, some fail with /bin/tar,
so let's put /usr/local/bin in PATH first.
Some tests fail with /bin/sh (link to /bin/ksh) so use bash instead
Signed-off-by: Joachim Schmitz <jojo@schmitz-digital.de>
Signed-off-by: Jeff King <peff@peff.net>
git commit -S, --gpg-sign was mentioned in the program's help message,
but not in the manpage.
This adds an equivalent entry for the option in the manpage.
Signed-off-by: Tom Jones <tom@oxix.org>
Signed-off-by: Jeff King <peff@peff.net>
A symbolic ref refs/heads/SYM was not correctly removed with
"git branch -d SYM"; the command removed the ref pointed by
SYM instead.
* rs/branch-del-symref:
branch: show targets of deleted symrefs, not sha1s
branch: skip commit checks when deleting symref branches
branch: delete symref branch, not its target
branch: factor out delete_branch_config()
branch: factor out check_branch_commit()
Allow an earlier "--short" option on the command line to be
countermanded with the "--long" option for "git status" and "git
commit".
* nd/status-long:
status: add --long output format option
"git grep -e pattern <tree>" asked the attribute system to read
"<tree>:.gitattributes" file in the working tree, which was
nonsense.
* nd/grep-true-path:
grep: stop looking at random places for .gitattributes
Further clean-up to the http codepath that picks up results after
cURL library is done with one request slot.
* jk/maint-http-init-not-in-result-handler:
http: do not set up curl auth after a 401
remote-curl: do not call run_slot repeatedly
"git log -F -E --grep='<ere>'" failed to use the given <ere>
pattern as extended regular expression, and instead looked for the
string literally. The early part of this series is a fix for it;
the latter part teaches log to respect the grep.* configuration.
* jc/grep-pcre-loose-ends:
log: honor grep.* configuration
log --grep: accept --basic-regexp and --perl-regexp
log --grep: use the same helper to set -E/-F options as "git grep"
revisions: initialize revs->grep_filter using grep_init()
grep: move pattern-type bits support to top-level grep.[ch]
grep: move the configuration parsing logic to grep.[ch]
builtin/grep.c: make configuration callback more reusable
If you remove a submodule, in order to keep the repository so that
"git checkout" to an older commit in the superproject history can
resurrect the submodule, the real repository will stay in $GIT_DIR
of the superproject. A later "git submodule add $path" to add a
different submodule at the same path will fail. Diagnose this case
a bit better, and if the user really wants to add an unrelated
submodule at the same path, give the "--name" option to give it a
place in $GIT_DIR of the superproject that does not conflict with
the original submodule.
* jl/submodule-add-by-name:
submodule add: Fail when .git/modules/<name> already exists unless forced
Teach "git submodule add" the --name option
"git rm submodule" cannot blindly remove a submodule directory as
its working tree may have local changes, and worse yet, it may even
have its repository embedded in it. Teach it some special cases
where it is safe to remove a submodule, specifically, when there is
no local changes in the submodule working tree, and its repository
is not embedded in its working tree but is elsewhere and uses the
gitfile mechanism to point at it.
* jl/submodule-rm:
submodule: teach rm to remove submodules unless they contain a git directory
fetch_pack() is used by transport.c, part of libgit.a while it stays
in builtin/fetch-pack.c. Move it to fetch-pack.c so that we won't get
undefined reference if a program that uses libgit.a happens to pull it
in.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
The submodule sync command was somehow left out when
--recursive was added to the other submodule commands.
Teach sync to handle the --recursive switch by recursing
when we're in a submodule we are sync'ing.
Change the report during sync to show submodule-path
instead of submodule-name to be consistent with the other
submodule commands and to help recursed paths make sense.
Signed-off-by: Phil Hord <hordp@cisco.com>
Acked-By: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Jeff King <peff@peff.net>
When renaming orig_args to orig_flags in 98dbe63d (submodule: only
preserve flags across recursive status/update invocations) the call site
of the recursive cmd_status was forgotten. At that place orig_args is
still passed into the recursion, which is always empty since then. This
did not break anything because the orig_flags logic is not needed at all
when a function from the submodule script is called with eval, as that
inherits all the variables set by the option parsing done in the first
level of the recursion.
Now that we know that orig_flags and orig_args aren't needed at all,
let's just remove them from cmd_status().
Thanks-to: Phil Hord <hordp@cisco.com>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Jeff King <peff@peff.net>
A test in t7404-submodule-foreach purports to test that
the --cached flag is properly noticed by --recursive calls
to the foreach command as it descends into nested
submodules. However, the test really does not perform this
test since the change it looks for is in a top-level
submodule handled by the first invocation of the command.
To properly test for the flag being passed to recursive
invocations, the change must be buried deeper in the
hierarchy.
Move the change one level deeper so it properly verifies
the recursive machinery of the 'git submodule status'
command.
Signed-off-by: Phil Hord <hordp@cisco.com>
Signed-off-by: Jeff King <peff@peff.net>
This helps removes the hack in fetch_pack() that copies my_args to args.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
send_pack() is used by transport.c, part of libgit.a while it stays in
builtin/send-pack.c. Move it to send-pack.c so that we won't get
undefined reference if a program that uses libgit.a happens to pull it
in.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
This is used by diff-no-index.c, part of libgit.a while it stays in
builtin/diff.c. Move it to diff.c so that we won't get undefined
reference if a program that uses libgit.a happens to pull it in.
While at it, move check_pager from git.c to pager.c. It makes more
sense there and pager.c is also part of libgit.a
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
This is used by bisect.c, part of libgit.a while it stays in
builtin/rev-list.c. Move it to commit.c so that we won't get undefined
reference if a program that uses libgit.a happens to pull it in.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
This function is used by bisect.c, part of libgit.a while
estimate_bisect_steps stays in builtin/rev-list.c. Move it to bisect.a
so we won't have undefine reference if a standalone program that uses
libgit.a happens to pull it in.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
These functions are called in sequencer.c, which is part of
libgit.a. This makes libgit.a potentially require builtin/merge.c for
external git commands.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Use string_list_split_in_place() to split the comma-separated
parameters string. This simplifies the code and also fixes a bug: the
old code made calls like
memcmp(p, "lines", p_len)
which needn't work if p_len is different than the length of the
constant string (and could illegally access memory if p_len is larger
than the length of the constant string).
When p_len was less than the length of the constant string, the old
code would have allowed some abbreviations to be accepted (e.g., "cha"
for "changes") but this seems to have been a bug rather than a
feature, because (1) it is not documented; (2) no attempt was made to
handle ambiguous abbreviations, like "c" for "changes" vs
"cumulative".
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
This function was added in f103f95b11 in
the erroneous expectation that it would be used in the
reimplementation of longest_ancestor_length(). But it turned out to
be easier to use a function specialized for comparing path prefixes
(i.e., one that knows about slashes and root paths) than to prepare
the paths in such a way that a generic string prefix comparison
function can be used. So delete string_list_longest_prefix() and its
documentation and test cases.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
longest_ancestor_length() relies on a textual comparison of directory
parts to find the part of path that overlaps with one of the paths in
prefix_list. But this doesn't work if any of the prefixes involves a
symbolic link, because the directories will look different even though
they might logically refer to the same directory. So canonicalize the
paths listed in GIT_CEILING_DIRECTORIES using real_path_if_valid()
before passing them to longest_ancestor_length(). (Also rename
normalize_ceiling_entry() to canonicalize_ceiling_entry() to reflect
the change.)
path is already in canonical form, so doesn't need to be canonicalized
again.
This fixes some problems with using GIT_CEILING_DIRECTORIES that
contains paths involving symlinks, including t4035 if run with --root
set to a path involving symlinks.
Please note that test t0060 is *not* changed analogously, because that
would make the test suite results dependent on the contents of the
local root directory. However, real_path() is already tested
independently, and the "ancestor" tests cover the non-normalization
aspects of longest_ancestor_length(), so coverage remains sufficient.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
Move the responsibility for normalizing prefixes from
longest_ancestor_length() to its callers. Use slightly different
normalizations at the two callers:
In setup_git_directory_gently_1(), use the old normalization, which
ignores paths that are not usable. In the next commit we will change
this caller to also resolve symlinks in the paths from
GIT_CEILING_DIRECTORIES as part of the normalization.
In "test-path-utils longest_ancestor_length", use the old
normalization, but die() if any paths are unusable. Also change t0060
to only pass normalized paths to the test program (no empty entries or
non-absolute paths, strip trailing slashes from the paths, and remove
tests that thereby become redundant).
The point of this change is to reduce the scope of the ancestor_length
tests in t0060 from testing normalization+longest_prefix to testing
only mostly longest_prefix. This is necessary because when
setup_git_directory_gently_1() starts resolving symlinks as part of
its normalization, it will not be reasonable to do the same in the
test suite, because that would make the test results depend on the
contents of the root directory of the filesystem on which the test is
run. HOWEVER: under Windows, bash mangles arguments that look like
absolute POSIX paths into DOS paths. So we have to retain the level
of normalization done by normalize_path_copy() to convert the
bash-mangled DOS paths (which contain backslashes) into paths that use
forward slashes.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
Change longest_ancestor_length() to take the prefixes argument as a
string_list rather than as a colon-separated string. This will make
it easier for the caller to alter the entries before calling
longest_ancestor_length().
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
The function is like real_path(), except that it returns NULL on error
instead of dying.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
It accepts a new parameter, die_on_error. If die_on_error is false,
it simply cleans up after itself and returns NULL rather than dying.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
You can override an option set in the LESS variable by simply prefixing
the command line option with `-+`. This is more robust than the previous
example if the default LESS options are to ever change.
Signed-off-by: Patrick Palka <patrick@parcs.ath.cx>
Signed-off-by: Jeff King <peff@peff.net>
Sparse issues an "Using plain integer as NULL pointer" warning while
checking a 'struct strbuf_list' initializer expression. The initial
field of the struct has pointer type, but the initializer expression
is given as '{0}'. In order to suppress the warning, we simply replace
the initializer with '{NULL}'.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Jeff King <peff@peff.net>
The git-reset's "<mode>" is an optional argument, however it was
documented as required.
The "<mode>" is documented as one of: --soft, --mixed, --hard, --merge
or --keep, so "<mode>" should be used instead of "--<mode>".
Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net>
Signed-off-by: Jeff King <peff@peff.net>
We currently just look at raw blob data when using "-S" to
pickaxe. This is mostly historical, as pickaxe predates the
textconv feature. If the user has bothered to define a
textconv filter, it is more likely that their search string will be
on the textconv output, as that is what they will see in the
diff (and we do not even provide a mechanism for them to
search for binary needles that contain NUL characters).
This patch teaches "-S" to use textconv, just as we
already do for "-G".
Signed-off-by: Jeff King <peff@peff.net>
If we are given an empty pickaxe needle like "git log -S ''",
it is impossible for us to find anything (because no matter
what the content, the count will always be 0). We currently
check this at the lowest level of contains(). Let's hoist
the logic much earlier to has_changes(), so that it is
simpler to return our answer before loading any blob data.
Signed-off-by: Jeff King <peff@peff.net>
If you use "-G" to grep a diff, we will apply a configured
textconv filter to the data before generating the diff.
However, if the diff is an addition or deletion, we do not
bother running the diff at all, and just look for the token
in the added (or removed) content. This works because we
know that the diff must contain every line of content.
However, while we used the textconv-derived buffers in the
regular diff, we accidentally passed the original unmodified
buffers to regexec when checking the added or removed
content. This could lead to an incorrect answer.
Worse, in some cases we might have a textconv buffer but no
original buffer (e.g., if we pulled the textconv data from
cache, or if we reused a working tree file when generating
it). In that case, we could actually feed NULL to regexec
and segfault.
Reported-by: Peter Oberndorfer <kumbayo84@arcor.de>
Signed-off-by: Jeff King <peff@peff.net>
t9200 defines $CVSROOT where cvs should init its repository
$CVSROOT is set to $PWD/cvsroot.
cvs init is supposed to create the repository inside $PWD/cvsroot/CVSROOT
"cvs init" (e.g. version 1.11.23) checks if the last element of the path is
"CVSROOT", and if a directory with e.g. $PWD/cvsroot/CVSROOT already exists.
For such a $CVSROOT cvs refuses to init a repository here:
"Cannot initialize repository under existing CVSROOT:
On a case insenstive file system cvsroot and CVSROOT are the same directories
and t9200 fails.
Solution: use $PWD/tmpcvsroot instead of cvsroot $PWD/cvsroot
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Jeff King <peff@peff.net>
AddressSanitizer (http://clang.llvm.org/docs/AddressSanitizer.html)
complains of a one-byte buffer underflow in parse_name_and_email() while
running the test suite. And indeed, if one of the lines in the mailmap
begins with '<', we dereference the address just before the beginning of
the buffer when looking for whitespace to remove, before checking that
we aren't going too far.
So reverse the order of the tests to make sure that we don't read
outside the buffer.
Signed-off-by: Romain Francoise <romain@orebokech.com>
Signed-off-by: Jeff King <peff@peff.net>
Doing a shift here is wrong because there is no extra
argument to consume when "--reference=<repo>" is used (note
the '=' instead of a space).
Signed-off-by: Stefan Zager <szager@google.com>
Signed-off-by: Jeff King <peff@peff.net>
Show that git format-patch can have a cover letter, include patch
commentary below the three dashes, and notes can also be
included.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Jeff King <peff@peff.net>
The --log-window-size parameter to git-svn fetch is undocumented.
Minimally describe what it does and why the user might change it.
Signed-off-by: Gunnlaugur Þór Briem <gunnlaugur@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Remove double negative, and include the repeat usage across
versions of a patch series.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Jeff King <peff@peff.net>
Sed on Mac OS X doesn't handle \s in a sed expressions so use a more
portable character set expression instead.
Signed-off-by: Ben Walton <bdwalton@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Before this change, output from ./configure could contain
botched wording like this:
checking Checking for POSIX Threads with '-pthread'... yes
instead of the intended:
checking for POSIX Threads with '-pthread'... yes
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
This change was already done by 0e615b252f (Matthieu Moy, Tue Nov 2
2010, Replace "remote tracking" with "remote-tracking"), but new
instances of remote tracking (without dash) were introduced in the
meantime.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Jeff King <peff@peff.net>
