Now you can say
[remote.junio]
url = git://git.kernel.org/pub/scm/git/git.git
pull = next:next
in your .git/config.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now you can store your remote information in the config file like this:
[remote.upstream]
url = me@company.com:the-project
push = master:iceballs
[jc: fixed up to adjust a different fix for Push: lines earlier.]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The C'ification of push left these behind.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds a builtin "push" command, which is largely just a C'ification of
the "git-push.sh" script.
Now, the reason I did it as a built-in is partly because it's yet another
step on relying less on shell, but it's actually mostly because I've
wanted to be able to push to _multiple_ repositories, and the most obvious
and simplest interface for that would seem be to just have a "remotes"
file that has multiple URL entries.
(For "pull", having multiple entries should either just select the first
one, or you could fall back on the others on failure - your choice).
And quite frankly, it just became too damn messy to do that in shell.
Besides, we actually have a fair amount of infrastructure in C, so it just
wasn't that hard to do.
Of course, this is almost totally untested. It probably doesn't work for
anything but the one trial I threw at it. "Simple" doesn't necessarily
mean "obviously correct".
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* fix:
Fix trivial typo in git-log man page.
Properly render asciidoc "callouts" in git man pages.
Fix up remaining man pages that use asciidoc "callouts".
Update the git-branch man page to include the "-r" option,
annotate: display usage information if no filename was given
annotate: fix warning about uninitialized scalar
git-am --resolved: more usable error message.
Adds an xsl fragment to render docbook callouts when
converting to man page format. Update the Makefile
to have "xmlto" use it when generating man pages.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Unfortunately docbook does not allow a callout to be
referenced from inside a callout list description.
Rewrite one paragraph in git-reset man page to work
around this limitation.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
After doing the hard work of hand resolving the conflicts in the
working tree, if the user forgets to run update-index to mark
the paths that have been resolved, the command gave an
unfriendly "fatal: git-write-tree: not able to write tree" error
message. Catch the situation early and give more meaningful
message and suggestion.
Noticed and suggested by Len Brown.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Check internal integrity to report corrupt pack or idx, and
then check cross-integrity between idx and pack.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When I split out the builtin commands into their own files, I left the
include of <sys/ioctl.h> in git.c rather than moving it to the file that
needed it (builtin-help.c).
Nobody seems to have noticed, because everything still worked, but because
the TIOCGWINSZ macro was now no longer defined when compiling the
"term_columns()" function, it would no longer automatically notice the
terminal size unless your system used the ancient "COLUMNS" environment
variable approach.
Trivially fixed by just moving the header include to the file that
actually needs it.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* fix:
commit-tree.c: check_valid() microoptimization.
Fix filename verification when in a subdirectory
rebase: typofix.
socksetup: don't return on set_reuse_addr() error
There is no point reading the whole object just to make sure it exists and
it is of the expected type. We added sha1_object_info() for such need
after this code was written, so use it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When we are in a subdirectory of a git archive, we need to take the prefix
of that subdirectory into accoung when we verify filename arguments.
Noted by Matthias Lederhofer
This also uses the improved error reporting for all the other git commands
that use the revision parsing interfaces, not just git-rev-parse. Also, it
makes the error reporting for mixed filenames and argument flags clearer
(you cannot put flags after the start of the pathname list).
[jc: with fix to a trivial typo noticed by Timo Hirvonen]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We use get_sha1() for -p (parent) objects, but still used
get_sha1_hex() for the tree. Just to be consistent, allow
extended SHA1 expression for the tree object name.
Note that this is not to encourage funky things like this:
git-commit-tree HEAD^{tree} -p HEAD
Signed-off-by: Junio C Hamano <junkio@cox.net>
When we updated ls-tree recursive output to omit the tree nodes,
246cc52f38 adjusted the old test
so that we do not expect to see trees in its output. Later,
with 0f8f45cb4a, we added back the
ability to show both with -t option, but we forgot to update the
test as well.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The patch format shows complete rewrite as deletion of all old lines
followed by addition of all new lines. Count lines consistenly with
that when doing diffstat.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Foolishly I renamed diff.o around which caused an old diff.o
taken out of libgit.a and got linked into resulting binary and
exhibited mysterious breakage for many people. This borrows
from the kernel Makefile (scripts/Makefile.build) to first remove
the target and then recreate.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The set_reuse_addr() error case was the only error case in
socklist() where we returned rather than continued. Not sure
why. Either we must free the socklist, or continue. This patch
continues on error.
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
(cherry picked from 0032d548db commit)
This has been an unfortunate sideway in the git API evolution.
We use git-repo-config for all the other .git/config interaction
so let's also use git-repo-config -l for the variable listing.
Signed-off-by: Petr Baudis <pasky@suse.cz>
This adds git-repo-config --list (or git-repo-config -l) support,
similar to what git-var -l does now (to be phased out so that we
have a single sane interface to the config file instead of fragmented
and confused API).
Signed-off-by: Petr Baudis <pasky@suse.cz>
This patch adds a Documentation/config.txt file included by git-repo-config
and currently aggregating hopefully all the available git plumbing / core
porcelain configuration variables, as well as briefly describing the format.
It also updates an outdated bit of the example in git-repo-config(1).
Signed-off-by: Petr Baudis <pasky@suse.cz>
Currently, if git-rev-parse encounters an argument that is neither a
recognizable revision name nor the name of an existing file or
directory, and it hasn't encountered a "--" argument, it prints an
error message saying "No such file or directory". This can be
confusing for users, including users of programs such as gitk that
use git-rev-parse, who may then think that they can't ask about the
history of files that no longer exist.
This makes it print a better error message, one that points out the
ambiguity and tells the user what to do to fix it.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This is a fix for a problem reported by Jim Radford where an argument
list somewhere overflows on repositories with lots of tags. In fact
it's now unnecessary to use git-rev-parse since git-rev-list can take
all the arguments that git-rev-parse can. This is inspired by but not
the same as the solutions suggested by Jim Radford and Linus Torvalds.
Signed-off-by: Paul Mackerras <paulus@samba.org>
The patch makes "--chmod=-x" and "--chmod=+x" act like "--add"
and "--remove" to affect the behaviour of the command for the
rest of the path parameters, not just the following one.
Signed-off-by: Junio C Hamano <junkio@cox.net>
"diff-index -m" does not mean "do not ignore merges", but means
"pretend missing files match the index".
The previous round tried to address this, but failed because
setup_revisions() ate "-m" flag before the caller had a chance
to intervene.
Signed-off-by: Junio C Hamano <junkio@cox.net>
