This change removes between 1 and 4 sed invocations per completion
entered by the user. In the case of cat-file the 4 invocations per
completion can take a while on Cygwin; running these replacements
directly within bash saves some time for the end user.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now that log, whatchanged, rev-list, etc. support the symmetric
difference operator '...' we should provide bash completion for it
just like we do for '..'.
While we are at it we can remove two sed invocations during the
interactive prompt and replace them with internal bash operations.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If the user has setup a command line of "git --git-dir=baz" then
anything we complete must be performed within the scope of "baz"
and not the current working directory.
This is useful with commands such as "git --git-dir=git.git log m"
to complete out "master" and view the log for the master branch of
the git.git repository. As a nice side effect this also works for
aliases within the target repository, just as git would honor them.
Unfortunately because we still examine arguments by absolute position
in most of the more complex commands (e.g. git push) using --git-dir
with those commands will probably still cause completion to fail.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now that Git natively supports remote specifications within the
config file such as:
[remote "origin"]
url = ...
we should provide bash completion support "out of the box" for
these remotes, just like we do for the .git/remotes directory.
Also cleaned up the __git_aliases expansion to use the same form
of querying and filtering repo-config as this saves two fork/execs
in the middle of a user prompted completion. Finally also forced
the variable 'word' to be local within __git_aliased_command.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The only platform which actually needs to define .exe suffixes as
part of its completion set is Cygwin. So don't define them on any
other platform.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The show-branch and merge-base commands were partially supported
when it came to bash completions as they were only specified in
one form another. Now we specify them in both forms.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Completion for the --hard/--soft/--mixed modes of operation as
well as a ref name for <commit-ish> can be very useful and save
some fingers.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
On Cygwin a user might complete the new git-branch builtin as
git-branch.exe, at which point bash requires a new completion
registration for the command.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This lets us take advantage of the fact that git-cherry-pick now saves
the message in MERGE_MSG too.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Bound to 'o' by default, compatible with pcl-cvs and
buffer-mode. Suggested by Han-Wen Nienhuys.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is useful when doing a merge that changes many files with only a
few conflicts here and there.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
- Add aliases to the list of available git commands.
- Make completion work for aliased commands.
Signed-off-by: Dennis Stosberg <dennis@stosberg.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
vc-git complains that it can't find the definition of ignore-errors
unless I (require 'cl). So I guess the correct place to do that is in
the file itself.
Signed-off-by: Karl Hasselström <kha@treskal.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Provide some more detailed installation instructions, for the
elisp-challenged among us.
Signed-off-by: Karl Hasselström <kha@treskal.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The deleted file should be labeled "renamed to" and the added file
"renamed from", not the other way around (duh!)
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a set of bash completion routines for many of the
popular core Git tools. I wrote these routines from scratch
after reading the git-compl and git-compl-lib routines available
from the gitcompletion package at http://gitweb.hawaga.org.uk/
and found those to be lacking in functionality for some commands.
Consequently there may be some similarities but many differences.
Since these are completion routines only for tools shipped with
core Git and since bash is a popular shell on many of the native
core Git platforms (Linux, Mac OS X, Solaris, BSD) including these
routines as part of the stock package would probably be convienent
for many users.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch avoids problems if vc-git.el is installed and activated, but
the git executable is not available, for example
http://list-archive.xemacs.org/xemacs-beta/200608/msg00062.html
Signed-off-by: Ville Skyttä <scop@xemacs.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
By default, running git-status again will now reuse an existing buffer
that displays the same directory. The old behavior of always creating
a new buffer can be obtained by customizing the git-reuse-status-buffer
option.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This way the ignore command will really only ignore the marked files
and not files with the same name in subdirectories.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add bindings for "h" and "?" in git-status-mode to display help about the mode,
including keymap via (describe-function 'git-status-mode), like in PCL-CVS.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The only visible change is that git-blame doesn't understand
"--compability" anymore, but it does accept "--compatibility" instead,
which is already documented.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Allow NO_SVN_TESTS to be defined to skip git-svn tests. These
tests are time-consuming due to SVN being slow, and even more so
if SVN Perl libraries are not available.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Here's a patch that fixes print-log and diff compatibility with recent
vc versions, such as current GNU Emacs CVS.
Signed-off-by: Ville Skytt,Ad(B <scop@xemacs.org>
Thanks to Santi <sbejar@gmail.com> for the bug report and explanation:
> /path/to/repository/project/file
> /path/to/repository/project-2/file
<...>
> you end up with a project with the following files:
>
> file
> -2/file
Signed-off-by: Eric Wong <normalperson@yhbt.net>
git-svn init url://to/the/repo local-repo
will create the local-repo dirrectory if doesn't exist yet and
populate it as expected.
Original patch by Luca Barbato, cleaned up and made to work for
the current version of git-svn by me (Eric Wong).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch renames man1 and man7 variables to man1dir and man7dir,
according to "Makefile Conventions: Variables for Installation
Directories" in make.info of GNU Make.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Makefiles in subdirectories now use existing value of INSTALL, bindir,
mandir if it is set, allowing those to be set in main Makefile or in
included config.mak. Main Makefile exports variables which it sets.
Accidentally it renames bin to bindir in Documentation/Makefile
(should be bindir from start, but is unused, perhaps to be removed).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Slower connections can make git-svn look as if it's doing
nothing for a long time; leaving the user wondering if we're
actually doing anything. Now we print some file progress just
to assure the user that something is going on while they're
waiting.
Added the -q/--quiet option to users to revert to the old method
if they preferred it.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
--follow-parent:
This is especially helpful when we're tracking a directory
that has been moved around within the repository, or if we
started tracking a branch and never tracked the trunk it was
descended from.
This relies on the SVN::* libraries to work. We can't
reliably parse path info from the svn command-line client
without relying on XML, so it's better just to have the SVN::*
libs installed.
This also removes oldvalue verification when calling update-ref
In SVN, branches can be deleted, and then recreated under the
same path as the original one with different ancestry
information, causing parent information to be mismatched /
misordered.
Also force the current ref, if existing, to be a parent,
regardless of whether or not it was specified.
--no-metadata:
This gets rid of the git-svn-id: lines at the end of every commit.
With this, you lose the ability to use the rebuild command. If
you ever lose your .git/svn/git-svn/.rev_db file, you won't be
able to fetch again, either. This is fine for one-shot imports.
Also fix some issues with multi-fetch --follow-parent that were
exposed while testing this. Additionally, repack checking is
simplified greatly.
git-svn log will not work on repositories using this, either.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is intended for interoperability with git-svnimport.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The 'graft-branches' command can now analyze tree matches for
merge detection after commits are done, when --branch or
--branch-all-refs options are used.
We ensure that tree joins (--branch and --branch-all-refs
options) during commit time only add SVN parents that occurred
before the commit we're importing
Also fixed branch detection via merge messages, this manner of
merge detection (a la git-svnimport) is really all fuzzy, but at
least it actually works now :)
Add some new tests to go along with these fixes, too.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Tested on a plain Ubuntu Hoary installation
using subversion 1.1.1-2ubuntu3
1.1.x issues I had to deal with:
* Avoid the noisy command-line client compatibility check if we
use the libraries.
* get_log() arguments differ (now using a nice wrapper from
Junio's suggestion)
* get_file() is picky about what kind of file handles it gets,
so I ended up redirecting STDOUT. I'm probably overflushing
my file handles, but that's the safest thing to do...
* BDB kept segfaulting on me during tests, so svnadmin will use FSFS
whenever we can.
* If somebody used an expanded CVS $Id$ line inside a file, then
propsetting it to use svn:keywords will cause the original CVS
$Id$ to be retained when asked for the original file. As far as
I can see, this is a server-side issue. We won't care in the
test anymore, as long as it's not expanded by SVN, a static
CVS $Id$ line is fine.
While we're at making ourselves more compatible, avoid grep
along with the -q flag, which is GNU-specific. (grep avoidance
tip from Junio, too)
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Trying to open an interactive editor in the console while stdout is
being piped to the parent process doesn't work out very well.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When tracking directories with nearly all of its files at
the most nested levels, --rmdir would accidentally go too
far when deleting.
Of course, we'll add a test for this condition, too.
Makefile: automatically run new tests as they appear in t/
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We will now automatically fetch the refs/remotes/git-svn ref
from origin and store a Pull: line for it.
--remote=<origin> may be passed if your remote is named something
other than 'origin'
Also, remember to make GIT_SVN_DIR whenever we need to create
.rev_db
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Tested on a plain Ubuntu Warty installation
using subversion 1.0.6-1.2ubuntu3
svn add --force was never needed, as it only affected
directories, which git (thankfully) doesn't track
The 1.0.x also didn't support symlinks(!), so allow NO_SYMLINK
to be defined for running tests
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Revisions with long commit messages were being skipped, since
the 'git-svn-id' metadata line was at the end and git-log uses a
32k buffer to print the commits.
Also the last 'git-svn-id' metadata line in a commit is always
the valid one, so make sure we use that, as well.
Made the verbose flag work by passing the correct option switch
('--summary') to git-log.
Finally, optimize -r/--revision argument handling by passing
the appropriate limits to revision
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This means we'll have a loose object when we encounter a symlink
but that's not the common case.
We also don't have to worry about svn:eol-style when using the
SVN libraries, either. So remove the code to deal with that.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Share the repack counter between branches when doing
multi-fetch.
Pass the -d flag to git repack by default. That's the
main reason we will want automatic pack generation, to
save space and improve disk cache performance. I won't
add -a by default since it can generate extremely large
packs that make RAM-starved systems unhappy.
We no longer generate the .git/svn/$GIT_SVN_ID/info/uuid
file, either. It was never read in the first place.
Check for and create .rev_db if we need to during fetch (in case
somebody manually blew away their .rev_db and wanted to start
over. Mainly makes debugging easier).
Croak with $? instead of $! if there's an error closing pipes
Quiet down some of the chatter, too.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
repo_path_split() is already pretty fast, and is already
optimized via caching.
We also don't need to create an exclude file if we're
relying on the SVN libraries.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This is a very intrusive change, so I've beefed up the tests
significantly. Added 'full-test' a target to the Makefile,
to test different possible configurations. This is intended
for maintainers only. Users should only be concerned with
'test' succeeding.
We now have a very simple custom database format for handling
mapping of svn revisions => git commits. Of course, we're
not really using it yet, either.
Also disabled automatic branch-finding on new trees for now.
It's too easily broken. revisions_eq() function should be
helpful for branch detection.
Also removed an extra assertion in fetch_cmd() that wasn't
correctly done. This bug was found by full-test.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
