The "patch" parameter used to include leading '+' of an added
line in the patch, and the array was treated as 1-based. Make
it accept the contents of the line alone and simplify the code.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function apply_line() changed its behaviour depending on the
ws_error_action, whitespace_error and if the input was a context.
Make its caller responsible for such checking so that we can convert
the function to copy the contents of line while fixing whitespace
breakage more easily.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We had two pointer variables pointing to the same buffer and an
integer variable used to index into its tail part that was
active (old, oldlines and oldsize for the preimage, and their
'new' counterparts for the postimage).
To help readability, use 'oldlines' as the allocated pointer,
and use 'old' as the pointer to the tail that advances while the
code builds up the contents in the buffer. The size 'oldsize'
can be computed as (old-oldines).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This updates the way preimage and postimage in a patch hunk is
parsed and prepared for applying. By looking at image->line[n].flag,
the code can tell if it is a common context line that is the
same between the preimage and the postimage.
This matters when we actually start applying a patch with
contexts that have whitespace breakages that have already been
fixed in the target file.
Wnen the caller knows the hunk needs to match at the beginning
or at the end, there is no point starting from the line number
that is found in the patch and trying match with increasing
offset. The logic to find matching lines was made more line
oriented with the previous patch and this optimization is now
trivial.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes the way git-apply internally works to be more line
oriented. The logic to find where the patch applies with offset
used to count line numbers by always counting LF from the
beginning of the buffer, but it is simplified because we count
the line length of the target file and the preimage snippet
upfront now.
The ultimate motivation is to allow applying patches
whose preimage context has whitespace corruption that has
already been corrected in the local copy. For that purpose, we
introduce a table of line-hash that allows us to match lines
that differ only in whitespaces.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This moves the logic to force match at the beginning and/or at
the end of the buffer to the actual function that finds the
match from its caller. This is a necessary preparation for the
next step to allow matching disregarding certain differences,
such as whitespace changes.
We probably could optimize this even more by taking advantage of
the fact that match_beginning and match_end forces the match to
be at an exact location (anchored at the beginning and/or the
end), but that's for another commit.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This restructures code to find matching location with offset
in find_offset() function, so that there is need for only one
call site of match_fragment() function. There still isn't a
change in the logic of the program.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This moves three "if" conditions out of line from find_offset()
function, which is responsible for finding the matching place in
the preimage to apply the patch. There is no change in the
logic of the program.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This converts the index explicitly on read and write to its on-disk
format, allowing the in-core format to contain more flags, and be
simpler.
In particular, the in-core format is now host-endian (as opposed to the
on-disk one that is network endian in order to be able to be shared
across machines) and as a result we can dispense with all the
htonl/ntohl on accesses to the cache_entry fields.
This will make it easier to make use of various temporary flags that do
not exist in the on-disk format.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When running "git apply --check" while --whitespace=fix is
enabled (either from the command line or via the configuration),
we reported that "N line(s) applied after _fixing_", but --check
by itself does not apply and this message was alarming.
We could even reword the message to say "N line(s) would have
been applied after fixing...", but this patch does not go that
far. Instead, we just make it use the "N lines add whitespace
errors" warning, which happens to be a good diagnostic message a
user would expect from the --check option.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix any sequence of 8 spaces in initial indent, not just the case where
the 8 spaces are the first thing on the line.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use 0 instead of -1 for the case where not tabs or spaces are found; it
will make some later math slightly simpler.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For consistency, make the two tools report whitespace errors in the
same way (the output of "diff --check" has been tweaked to match
that of "git apply").
Note that although the textual content is basically the same only
"git diff --check" provides a colorized version of the problematic
lines; making "git apply" do colorization will require more extensive
changes (figuring out the diff colorization preferences of the user)
and so that will be a subject for another commit.
Signed-off-by: Wincent Colaiuta <win@wincent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit unifies three separate places where whitespace checking was
performed:
- the whitespace checking previously done in builtin-apply.c is
extracted into a function in ws.c
- the equivalent logic in "git diff" is removed
- the emit_line_with_ws() function is also removed because that also
rechecks the whitespace, and its functionality is rolled into ws.c
The new function is called check_and_emit_line() and it does two things:
checks a line for whitespace errors and optionally emits it. The checking
is based on lines of content rather than patch lines (in other words, the
caller must strip the leading "+" or "-"); this was suggested by Junio on
the mailing list to allow for a future extension to "git show" to display
whitespace errors in blobs.
At the same time we teach it to report all classes of whitespace errors
found for a given line rather than reporting only the first found error.
Signed-off-by: Wincent Colaiuta <win@wincent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/spht:
Use gitattributes to define per-path whitespace rule
core.whitespace: documentation updates.
builtin-apply: teach whitespace_rules
builtin-apply: rename "whitespace" variables and fix styles
core.whitespace: add test for diff whitespace error highlighting
git-diff: complain about >=8 consecutive spaces in initial indent
War on whitespace: first, a bit of retreat.
Conflicts:
cache.h
config.c
diff.c
The `core.whitespace` configuration variable allows you to define what
`diff` and `apply` should consider whitespace errors for all paths in
the project (See gitlink:git-config[1]). This attribute gives you finer
control per path.
For example, if you have these in the .gitattributes:
frotz whitespace
nitfol -whitespace
xyzzy whitespace=-trailing
all types of whitespace problems known to git are noticed in path 'frotz'
(i.e. diff shows them in diff.whitespace color, and apply warns about
them), no whitespace problem is noticed in path 'nitfol', and the
default types of whitespace problems except "trailing whitespace" are
noticed for path 'xyzzy'. A project with mixed Python and C might want
to have:
*.c whitespace
*.py whitespace=-indent-with-non-tab
in its toplevel .gitattributes file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds description of core.whitespace to the manual page of git-config,
and updates the stale description of whitespace handling in the manual
page of git-apply.
Also demote "strip" to a synonym status for "fix" as the value of --whitespace
option given to git-apply.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We earlier introduced core.whitespace to allow users to tweak the
definition of what the "whitespace errors" are, for the purpose of diff
output highlighting. This teaches the same to git-apply, so that the
command can both detect (when --whitespace=warn option is given) and fix
(when --whitespace=fix option is given) as configured.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The variables were somewhat misnamed.
* "What to do when whitespace errors are detected" is now called
"ws_error_action" (used to be called "new_whitespace");
* The constants to denote the possible actions are "nowarn_ws_error",
"warn_on_ws_error", "die_on_ws_error", and "correct_ws_error". The
last one used to be "strip_whitespace", but we correct whitespace
error in indent (SP followed by HT) and "strip" is not quite an
accurate name for it.
Other than the renaming of variables and constants, there is no
functional change in this patch. While we are at it, it also fixes
overly long lines and multi-line comment styles (which of course do
not affect the generated code at all).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Solaris Workshop Compiler found a few unreachable statements.
Signed-off-by: Guido Ostkamp <git@ostkamp.fastmail.fm>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-add-sync-stat:
t2200: test more cases of "add -u"
git-add: make the entry stat-clean after re-adding the same contents
ce_match_stat, run_diff_files: use symbolic constants for readability
Conflicts:
builtin-add.c
ce_match_stat() can be told:
(1) to ignore CE_VALID bit (used under "assume unchanged" mode)
and perform the stat comparison anyway;
(2) not to perform the contents comparison for racily clean
entries and report mismatch of cached stat information;
using its "option" parameter. Give them symbolic constants.
Similarly, run_diff_files() can be told not to report anything
on removed paths. Also give it a symbolic constant for that.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix size_t vs. unsigned long pointer mismatch warnings introduced
with the addition of strbuf_detach().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* ph/strbuf: (44 commits)
Make read_patch_file work on a strbuf.
strbuf_read_file enhancement, and use it.
strbuf change: be sure ->buf is never ever NULL.
double free in builtin-update-index.c
Clean up stripspace a bit, use strbuf even more.
Add strbuf_read_file().
rerere: Fix use of an empty strbuf.buf
Small cache_tree_write refactor.
Make builtin-rerere use of strbuf nicer and more efficient.
Add strbuf_cmp.
strbuf_setlen(): do not barf on setting length of an empty buffer to 0
sq_quote_argv and add_to_string rework with strbuf's.
Full rework of quote_c_style and write_name_quoted.
Rework unquote_c_style to work on a strbuf.
strbuf API additions and enhancements.
nfv?asprintf are broken without va_copy, workaround them.
Fix the expansion pattern of the pseudo-static path buffer.
builtin-for-each-ref.c::copy_name() - do not overstep the buffer.
builtin-apply.c: fix a tiny leak introduced during xmemdupz() conversion.
Use xmemdupz() in many places.
...
* make strbuf_read_file take a size hint (works like strbuf_read)
* use it in a couple of places.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For that purpose, the ->buf is always initialized with a char * buf living
in the strbuf module. It is made a char * so that we can sloppily accept
things that perform: sb->buf[0] = '\0', and because you can't pass "" as an
initializer for ->buf without making gcc unhappy for very good reasons.
strbuf_init/_detach/_grow have been fixed to trust ->alloc and not ->buf
anymore.
as a consequence strbuf_detach is _mandatory_ to detach a buffer, copying
->buf isn't an option anymore, if ->buf is going to escape from the scope,
and eventually be free'd.
API changes:
* strbuf_setlen now always works, so just make strbuf_reset a convenience
macro.
* strbuf_detatch takes a size_t* optional argument (meaning it can be
NULL) to copy the buffer's len, as it was needed for this refactor to
make the code more readable, and working like the callers.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-am used "git apply -z --index-info" to find the original versions
of the files touched by the diff, to be able to do an inexpensive
three-way merge.
This operation makes only sense in a repository, since the index
information in the diff refers to blobs, which have to be present in
the current repository.
Therefore, teach "git apply" a mode to write out the result as an
index file to begin with, obviating the need for scripts to do it
themselves.
The sole user for --index-info is "git am" is converted to
use --build-fake-ancestor in this patch.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* quote_c_style works on a strbuf instead of a wild buffer.
* quote_c_style is now clever enough to not add double quotes if not needed.
* write_name_quoted inherits those advantages, but also take a different
set of arguments. Now instead of asking for quotes or not, you pass a
"terminator". If it's \0 then we assume you don't want to escape, else C
escaping is performed. In any case, the terminator is also appended to the
stream. It also no longer takes the prefix/prefix_len arguments, as it's
seldomly used, and makes some optimizations harder.
* write_name_quotedpfx is created to work like write_name_quoted and take
the prefix/prefix_len arguments.
Thanks to those API changes, diff.c has somehow lost weight, thanks to the
removal of functions that were wrappers around the old write_name_quoted
trying to give it a semantics like the new one, but performing a lot of
allocations for this goal. Now we always write directly to the stream, no
intermediate allocation is performed.
As a side effect of the refactor in builtin-apply.c, the length of the bar
graphs in diffstats are not affected anymore by the fact that the path was
clipped.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
If the gain is not obvious in the diffstat, the resulting code is more
readable, _and_ in checkout-index/update-index we now reuse the same buffer
to unquote strings instead of always freeing/mallocing.
This also is more coherent with the next patch that reworks quoting
functions.
The quoting function is also made more efficient scanning for backslashes
and treating portions of strings without a backslash at once.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
* master: (94 commits)
Fixed update-hook example allow-users format.
Documentation/git-svn: updated design philosophy notes
t/t4014: test "am -3" with mode-only change.
git-commit.sh: Shell script cleanup
preserve executable bits in zip archives
Fix lapsus in builtin-apply.c
git-push: documentation and tests for pushing only branches
git-svnimport: Use separate arguments in the pipe for git-rev-parse
contrib/fast-import: add perl version of simple example
contrib/fast-import: add simple shell example
rev-list --bisect: Bisection "distance" clean up.
rev-list --bisect: Move some bisection code into best_bisection.
rev-list --bisect: Move finding bisection into do_find_bisection.
Document ls-files --with-tree=<tree-ish>
git-commit: partial commit of paths only removed from the index
git-commit: Allow partial commit of file removal.
send-email: make message-id generation a bit more robust
git-apply: fix whitespace stripping
git-gui: Disable native platform text selection in "lists"
apply --index-info: fall back to current index for mode changes
...
git-am used "git apply -z --index-info" to find the original versions
of the files touched by the diff, to be able to do an inexpensive
three-way merge.
This operation makes only sense in a repository, since the index
information in the diff refers to blobs, which have to be present in
the current repository.
Therefore, teach "git apply" a mode to write out the result as an
index file to begin with, obviating the need for scripts to do it
themselves.
The sole user for --index-info is "git am" is converted to
use --build-fake-ancestor in this patch.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Fixed update-hook example allow-users format.
Documentation/git-svn: updated design philosophy notes
t/t4014: test "am -3" with mode-only change.
Fix lapsus in builtin-apply.c
git-push: documentation and tests for pushing only branches
git-svnimport: Use separate arguments in the pipe for git-rev-parse
* cr/reset:
Simplify cache API
An additional test for "git-reset -- path"
Make "git reset" a builtin.
Move make_cache_entry() from merge-recursive.c into read-cache.c
Add tests for documented features of "git reset".
The algorithm isn't right here: it accumulates any set of 8 spaces into
tabs even if they're separated by tabs, so
<four spaces><tab><four spaces><tab>
is converted to
<tab><tab><tab>
when it should be just
<tab><tab>
So teach git-apply that a tab hides any group of less than 8 previous
spaces in a row.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff" does not record index lines for pure mode changes (i.e. no
lines changed). Therefore, apply --index-info would call out a bogus
error.
Instead, fall back to reading the info from the current index.
Incidentally, this fixes an error where git-rebase would not rebase a
commit including a pure mode change, and changes requiring a threeway
merge.
Noticed and later tested by Chris Shoemaker.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Now, those functions take an "out" strbuf argument, where they store their
result if any. In that case, it also returns 1, else it returns 0.
* those functions support "in place" editing, in the sense that it's OK to
call them this way:
convert_to_git(path, sb->buf, sb->len, sb);
When doable, conversions are done in place for real, else the strbuf
content is just replaced with the new one, transparentely for the caller.
If you want to create a new filter working this way, being the accumulation
of filter1, filter2, ... filtern, then your meta_filter would be:
int meta_filter(..., const char *src, size_t len, struct strbuf *sb)
{
int ret = 0;
ret |= filter1(...., src, len, sb);
if (ret) {
src = sb->buf;
len = sb->len;
}
ret |= filter2(...., src, len, sb);
if (ret) {
src = sb->buf;
len = sb->len;
}
....
return ret | filtern(..., src, len, sb);
}
That's why subfilters the convert_to_* functions called were also rewritten
to work this way.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, add_file_to_index() invalidated the path in the cache-tree
but remove_file_from_cache() did not, and the user of the latter
needed to invalidate the entry himself. This led to a few bugs due to
missed invalidate calls already. This patch makes the management of
cache-tree less error prone by making more invalidate calls from lower
level cache API functions.
The rules are:
- If you are going to write the index, you should either maintain
cache_tree correctly.
- If you cannot, alternatively you can remove the entire cache_tree
by calling cache_tree_free() before you call write_cache().
- When you modify the index, cache_tree_invalidate_path() should be
called with the path you are modifying, to discard the entry from
the cache-tree structure.
- The following cache API functions exported from read-cache.c (and
the macro whose names have "cache" instead of "index")
automatically call cache_tree_invalidate_path() for you:
- remove_file_from_index();
- add_file_to_index();
- add_index_entry();
You can modify the index bypassing the above API functions
(e.g. find an existing cache entry from the index and modify it in
place). You need to call cache_tree_invalidate_path() yourself in
such a case.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Add strbuf_rtrim to remove trailing spaces.
* Add strbuf_insert to insert data at a given position.
* Off-by one fix in strbuf_addf: strbuf_avail() does not counts the final
\0 so the overflow test for snprintf is the strict comparison. This is
not critical as the growth mechanism chosen will always allocate _more_
memory than asked, so the second test will not fail. It's some kind of
miracle though.
* Add size extension hints for strbuf_init and strbuf_read. If 0, default
applies, else:
+ initial buffer has the given size for strbuf_init.
+ first growth checks it has at least this size rather than the
default 8192.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the preimage we are patching is shorter than what the patch
text expects, we tried to match the buffer contents at the
"original" line with the fragment in full, without checking we
have enough data to match in the preimage. This caused the size
of a later memmove() to wrap around and attempt to scribble
almost the entire address space. Not good.
The code that follows the part this patch touches tries to match
the fragment with line offsets. Curiously, that code does not
have the problem --- it guards against reading past the end of
the preimage.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply "Subproject commit HEX" changes produced by git-diff.
As usual in the current git, only the superproject itself is actually
modified (possibly creating empty directories for new submodules).
Any checked-out submodule is left untouched and is not required to
be up-to-date.
With clean-ups from Junio C Hamano.
Signed-off-by: Sven Verdoolaege <skimo@kotnet.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
apply: remove directory that becomes empty by renaming the last file away
setup.c:verify_non_filename(): don't die unnecessarily while disambiguating
We attempt to remove directory that becomes empty after removal
of a file. We should do the same when we rename an existing
file away.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git apply" used to take check the whitespace in the wrong
direction.
Noticed by Daniel Barkalow.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The earlier code removed one newline too many from the hunk that
adds new lines at the end of the file. Also the way the code
counted the added blank lines was somewhat roundabout; I think
the way updated code does it is more direct and easier to
follow:
* We keep track of the number of blank lines added;
* While processing each line, we notice if it adds a blank
line, and increment the counter, or reset it to zero
otherwise;
* When actually we apply the data, we remove the empty lines we
counted earlier if we are applying it at the end of the
file.
Signed-off-by: Junio C Hamano <junkio@cox.net>
[jc: with an obvious microfix to avoid doing this unless --whitespace=strip]
Signed-off-by: Marco Costalba <mcostalba@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch fixes all calls to xread() where the return value is not
stored into an ssize_t. The patch should not have any effect whatsoever,
other than putting better/more appropriate type names on variables.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
HPA noticed that git-rebase fails when changes involve symlinks
in the middle of the hierarchy. Consider:
* The tree state before the patch is applied has arch/x86_64/boot
as a symlink pointing at ../i386/boot/
* The patch tries to remove arch/x86_64/boot symlink, and
create bunch of files there: .gitignore, Makefile, etc.
git-apply tries to be careful while applying patches; it never
touches the working tree until it is convinced that the patch
would apply cleanly. One of the check it does is that when it
knows a path is going to be created by the patch, it runs
lstat() on the path to make sure it does not exist.
This leads to a false alarm. Because we do not touch the
working tree before all the check passes, when we try to make
sure that arch/x86_64/boot/.gitignore does not exist yet, we
haven't removed the arch/x86_64/boot symlink. The lstat() check
ends up seeing arch/i386/boot/.gitignore through the
yet-to-be-removed symlink, and says "Hey, you already have a
file there, but what you fed me is a patch to create a new
file. I am not going to clobber what you have in the working
tree."
We have similar checks to see a file we are going to modify does
exist and match the preimage of the diff, which is done by
directly opening and reading the file.
For a file we are going to delete, we make sure that it does
exist and matches what is going to be removed (a removal patch
records the full preimage, so we check what you have in your
working tree matches it in full -- otherwise we would risk
losing your local changes), which again is done by directly
opening and reading the file.
These checks need to be adjusted so that they are not fooled by
symlinks in the middle.
- To make sure something does not exist, first lstat(). If it
does not exist, it does not, so be happy. If it _does_, we
might be getting fooled by a symlink in the middle, so break
leading paths and see if there are symlinks involved. When
we are checking for a path a/b/c/d, if any of a, a/b, a/b/c
is a symlink, then a/b/c/d does _NOT_ exist, for the purpose
of our test.
This would fix this particular case you saw, and would not
add extra overhead in the usual case.
- To make sure something already exists, first lstat(). If it
does not exist, barf (up to this, we already do). Even if it
does seem to exist, we might be getting fooled by a symlink
in the middle, so make sure leading paths are not symlinks.
This would make the normal codepath much more expensive for
deep trees, which is a bit worrisome.
This patch implements the first side of the check "making sure
it does not exist". The latter "making sure it exists" check is
not done yet, so applying the patch in reverse would still
fail, but we have to start from somewhere.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* 'jc/attr': (28 commits)
lockfile: record the primary process.
convert.c: restructure the attribute checking part.
Fix bogus linked-list management for user defined merge drivers.
Simplify calling of CR/LF conversion routines
Document gitattributes(5)
Update 'crlf' attribute semantics.
Documentation: support manual section (5) - file formats.
Simplify code to find recursive merge driver.
Counto-fix in merge-recursive
Fix funny types used in attribute value representation
Allow low-level driver to specify different behaviour during internal merge.
Custom low-level merge driver: change the configuration scheme.
Allow the default low-level merge driver to be configured.
Custom low-level merge driver support.
Add a demonstration/test of customized merge.
Allow specifying specialized merge-backend per path.
merge-recursive: separate out xdl_merge() interface.
Allow more than true/false to attributes.
Document git-check-attr
Change attribute negation marker from '!' to '-'.
...
* maint:
git-shortlog: Fix two formatting errors in asciidoc documentation
Fix overwriting of files when applying contextually independent diffs
git-svn: don't allow globs to match regular files
Noticed by applying two diffs of different contexts to the same file.
The check for existence of a file was wrong: the test assumed it was
a directory and reset the errno (twice: directly and by calling
lstat). So if an entry existed and was _not_ a directory no attempt
was made to rename into it, because the errno (expected by renaming
code) was already reset to 0. This resulted in error:
fatal: unable to write file file mode 100644
For Linux, removing "errno = 0" is enough, as lstat wont modify errno
if it was successful. The behavior should not be depended upon,
though, so modify the "if" as well.
The test simulates this situation.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/index-output:
git-read-tree --index-output=<file>
_GIT_INDEX_OUTPUT: allow plumbing to output to an alternative index file.
Conflicts:
builtin-apply.c
* maint:
Fix lseek(2) calls with args 2 and 3 swapped
Honor -p<n> when applying git diffs
Fix dependency of common-cmds.h
Fix renaming branch without config file
DESTDIR support for git/contrib/emacs
gitweb: Fix bug in "blobdiff" view for split (e.g. file to symlink) patches
Document --left-right option to rev-list.
Revert "builtin-archive: use RUN_SETUP"
rename contrib/hooks/post-receieve-email to contrib/hooks/post-receive-email.
rerere: make sorting really stable.
Fix t4200-rerere for white-space from "wc -l"
This is an internal variable used to tell if we need to write
out the resulting index.
I'll be introducing write_index() function which would collide
with it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
If the user is trying to apply a Git generated diff file and they
have specified a -p<n> option, where <n> is not 1, the user probably
has a good reason for doing this. Such as they are me, trying to
apply a patch generated in git.git for the git-gui subdirectory to
the git-gui.git repository, where there is no git-gui subdirectory
present.
Users shouldn't supply -p2 unless they mean it. But if they are
supplying it, they probably have thought about how to make this
patch apply to their working directory, and want to risk whatever
results may come from that.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When defined, this allows plumbing commands that update the
index (add, apply, checkout-index, merge-recursive, mv,
read-tree, rm, update-index, and write-tree) to write their
resulting index to an alternative index file while holding a
lock to the original index file. With this, git-commit that
jumps the index does not have to make an extra copy of the index
file, and more importantly, it can do the update while holding
the lock on the index.
However, I think the interface to let an environment variable
specify the output is a mistake, as shown in the documentation.
If a curious user has the environment variable set to something
other than the file GIT_INDEX_FILE points at, almost everything
will break. This should instead be a command line parameter to
tell these plumbing commands to write the result in the named
file, to prevent stupid mistakes.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When we write out the result of patch application, we sometimes
need to munge the data (e.g. under core.autocrlf). After doing
so, what we should free is the temporary buffer that holds the
converted data returned from convert_to_working_tree(), not the
original one.
This patch also moves the call to open() up in the function, as
the caller expects us to fail cheaply if leading directories
need to be created (and then the caller creates them and calls
us again). For that calling pattern, attempting conversion
before opening the file adds unnecessary overhead.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some systems have sizeof(off_t) == 8 while sizeof(size_t) == 4.
This implies that we are able to access and work on files whose
maximum length is around 2^63-1 bytes, but we can only malloc or
mmap somewhat less than 2^32-1 bytes of memory.
On such a system an implicit conversion of off_t to size_t can cause
the size_t to wrap, resulting in unexpected and exciting behavior.
Right now we are working around all gcc warnings generated by the
-Wshorten-64-to-32 option by passing the off_t through xsize_t().
In the future we should make xsize_t on such problematic platforms
detect the wrapping and die if such a file is accessed.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some file systems that can host git repositories and their working copies
do not support symbolic links. But then if the repository contains a symbolic
link, it is impossible to check out the working copy.
This patch enables partial support of symbolic links so that it is possible
to check out a working copy on such a file system. A new flag
core.symlinks (which is true by default) can be set to false to indicate
that the filesystem does not support symbolic links. In this case, symbolic
links that exist in the trees are checked out as small plain files, and
checking in modifications of these files preserve the symlink property in
the database (as long as an entry exists in the index).
Of course, this does not magically make symbolic links work on such defective
file systems; hence, this solution does not help if the working copy relies
on that an entry is a real symbolic link.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We currently have two parallel notation for dealing with object types
in the code: a string and a numerical value. One of them is obviously
redundent, and the most used one requires more stack space and a bunch
of strcmp() all over the place.
This is an initial step for the removal of the version using a char array
found in object reading code paths. The patch is unfortunately large but
there is no sane way to split it in smaller parts without breaking the
system.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
git-apply: do not fix whitespaces on context lines.
diff --cc: integer overflow given a 2GB-or-larger file
mailinfo: do not get confused with logical lines that are too long.
Internal function apply_line() is called to copy both context lines
and added lines to the output buffer, while possibly fixing the
whitespace breakages depending on --whitespace=strip settings.
However, it did its fix-up on both context lines and added lines.
This resulted in two symptoms:
(1) The number of lines reported to have been fixed up included
these context lines.
(2) However, the lines actually shown were limited to the added
lines that had whitespace breakages.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* lt/crlf:
Teach core.autocrlf to 'git apply'
t0020: add test for auto-crlf
Make AutoCRLF ternary variable.
Lazy man's auto-CRLF
* jc/apply-config:
t4119: test autocomputing -p<n> for traditional diff input.
git-apply: guess correct -p<n> value for non-git patches.
git-apply: notice "diff --git" patch again
Fix botched "leak fix"
t4119: add test for traditional patch and different p_value
apply: fix memory leak in prefix_one()
git-apply: require -p<n> when working in a subdirectory.
git-apply: do not lose cwd when run from a subdirectory.
Teach 'git apply' to look at $HOME/.gitconfig even outside of a repository
Teach 'git apply' to look at $GIT_DIR/config
When a patch fails, I automatically add '-v' to the command line
to see what fails.
This patch makes -v a synonym to --verbose, and actually tells
the user which text was not found.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This enhances the third point in the previous commit. When
applying a non-git patch that begins like this:
--- 2.6.orig/mm/slab.c
+++ 2.6/mm/slab.c
@@ -N,M +L,K @@@
...
and if you are in 'mm' subdirectory, we notice that -p2 is the
right option to use to apply the patch in file slab.c in the
current directory (i.e. mm/slab.c)
The guess function also knows about this pattern, where you
would need to use -p0 if applying from the top-level:
--- mm/slab.c
+++ mm/slab.c
@@ -N,M +L,K @@@
...
Signed-off-by: Junio C Hamano <junkio@cox.net>
Earlier one that tried to be too consistent with GNU patch by
not stripping the leading path when we _know_ we are in a
subdirectory and the patch is relative to the toplevel was a
mistake. This fixes it.
- No change to behaviour when it is run from the toplevel of
the repository.
- When run from a subdirectory to apply a git-generated patch,
it uses the right -p<n> value automatically, with or without
--index nor --cached option.
- When run from a subdirectory to apply a randomly generated
patch, it wants the right -p<n> value to be given by the
user.
The second one is a pure improvement to correct inconsistency
between --index and non --index case, compared with 1.5.0. The
third point could be further improved to guess what the right
value for -p<n> should be by looking at the patch, but should be
a topic of a separate patch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When (new_name == old_name), the previous one prefixed old_name
alone, leaving new_name untouched, and worse yet, left it
dangling pointing at an already freed memory location.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This mechanically converts strncmp() to use prefixcmp(), but only when
the parameters match specific patterns, so that they can be verified
easily. Leftover from this will be fixed in a separate step, including
idiotic conversions like
if (!strncmp("foo", arg, 3))
=>
if (!(-prefixcmp(arg, "foo")))
This was done by using this script in px.perl
#!/usr/bin/perl -i.bak -p
if (/strncmp\(([^,]+), "([^\\"]*)", (\d+)\)/ && (length($2) == $3)) {
s|strncmp\(([^,]+), "([^\\"]*)", (\d+)\)|prefixcmp($1, "$2")|;
}
if (/strncmp\("([^\\"]*)", ([^,]+), (\d+)\)/ && (length($1) == $3)) {
s|strncmp\("([^\\"]*)", ([^,]+), (\d+)\)|(-prefixcmp($2, "$1"))|;
}
and running:
$ git grep -l strncmp -- '*.c' | xargs perl px.perl
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-apply running inside a subdirectory, with or without --index,
used to always assume that the patch is formatted in such a way
to apply with -p1 from the toplevel, but it is more useful and
consistent with the use of "GNU patch -p1" if it defaulted to
assume that its input is meant to apply at the level it is
invoked in.
This changes the behaviour. It used to be that the patch
generated this way would apply without any trick:
edit Documentation/Makefile
git diff >patch.file
cd Documentation
git apply ../patch.file
You need to give an explicit -p2 to git-apply now. On the other
hand, if you got a patch from somebody else who did not follow
"patch is to apply from the top with -p1" convention, the input
patch would start with:
diff -u Makefile.old Makefile
--- Makefile.old
+++ Makefile
and in such a case, you can apply it with:
git apply -p0 patch.file
Signed-off-by: Junio C Hamano <junkio@cox.net>
When a patch modifies (not deletes) the last file in a
directory, because we treat a modification just as deletion
followed by creation, and deleting the last file in a directory
automatically rmdir(2)'s that directory, we ended up removing
the directory, which can potentially be the cwd, and then
recreating the same directory to create the patch result.
Avoid the rmdir step when remove_file() is called only because
we are replacing it with the result by later calling
create_file().
Signed-off-by: Junio C Hamano <junkio@cox.net>
This teaches git-apply that the data read from and written to
the filesystem might need to get converted to adjust for local
line-ending convention.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When neither --index nor --cached was used, git-apply did not
try calling setup_git_directory(), which means it did not look
at configuration files at all. This fixes it to call the setup
function but still allow the command to be run in a directory
not controlled by git.
The bug probably meant that 'git apply', not moving up to the
toplevel, did not apply properly formatted diffs from the
toplevel when you are inside a subdirectory, even though 'git
apply --index' would. As a side effect, this patch fixes it as
well.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When we do not trust executable bit from lstat(2), we copied
existing ce_mode bits without checking if the filesystem object
is a regular file (which is the only thing we apply the "trust
executable bit" business) nor if the blob in the index is a
regular file (otherwise, we should do the same as registering a
new regular file, which is to default non-executable).
Noticed by Johannes Sixt.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The static variable "prefix" was shadowed by an unused parameter
of the same name. In case of execution in a subdirectory, the
static variable was accessed, leading to a crash.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Returning negative value from there does not stop the caller from using
the earlier part.
Noticed by Linus.
Signed-off-by: Junio C Hamano <junkio@cox.net>
find_header() function is used to read and parse the patchfile
and it detects errors in the patch, but one place ignored the
error and went ahead, which was quite bad.
Noticed by Jeff Garzik.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a mechanical clean-up of the way *.c files include
system header files.
(1) sources under compat/, platform sha-1 implementations, and
xdelta code are exempt from the following rules;
(2) the first #include must be "git-compat-util.h" or one of
our own header file that includes it first (e.g. config.h,
builtin.h, pkt-line.h);
(3) system headers that are included in "git-compat-util.h"
need not be included in individual C source files.
(4) "git-compat-util.h" does not have to include subsystem
specific header files (e.g. expat.h).
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch fixes a sparse warning about inaccurate_eof being a
"dubious one-bit signed bitfield", makes three more binary
variables members of this (now unsigned) bitfield and adds a
short comment to indicate the nature of two ternary variables.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We do not even know number of lines so showing it as 0 0 is
lying. This would also help Porcelains like cvsexportcommit.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Remove unsupported C99 style struct initializers in git-archive.
Remove SIMPLE_PROGRAMS and make git-daemon a normal program.
Use ULONG_MAX rather than implicit cast of -1.
At least one (older) version of the Solaris C compiler won't allow
'unsigned long x = -1' without explicitly casting -1 to a type of
unsigned long. So instead use ULONG_MAX, which is really the
correct constant anyway.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We deduced a GNU diff output that does not use /dev/null convention
as creation (deletion) diff correctly by looking at the lack of context
and deleted lines (added lines), but forgot to reset the new (old) name
field properly.
This was a regression when we added a workaround for --unified=0 insanity.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The latest GNU diff from CVS emits an empty line to express
an empty context line, instead of more traditional "single
white space followed by a newline". Do not get broken by it.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Most callers of write_sha1_file_prepare() are only interested in the
resulting hash but don't care about the returned file name or the header.
This patch adds a simple wrapper named hash_sha1_file() which does just
that, and converts potential callers.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Somebody was wondering on #git channel why a git generated diff
does not apply with GNU patch when the filename contains a SP.
It is because GNU patch expects to find TAB (and trailing timestamp)
on ---/+++ (old_name and new_name) lines after the filenames.
The "diff --git" output format was carefully designed to be
compatible with GNU patch where it can, but whitespace
characters were always a pain.
We can make our output a bit more GNU patch friendly by adding an
extra TAB (but not trailing timestamp) to old/new name lines when
the filename as a SP in it. This updates git-apply to prepare
ourselves to accept such a patch, but we still do not generate
output that is patch friendly yet. That change needs to wait
until everybody has this change.
When a filename contains a real tab, "diff --git" format
always c-quotes it as discussed on the list with GNU patch
maintainer previously:
http://marc.theaimsgroup.com/?l=git&m=112927316408690&w=2
so there should be no downside.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes --whitespace={warn,error,strip} option to also notice
the leading whitespace errors in addition to the trailing
whitespace errors. Spaces that are followed by a tab in indent
are detected as errors, and --whitespace=strip option fixes them.
Signed-off-by: Junio C Hamano <junkio@cox.net>
In "git-apply", we have a few sanity checks and heuristics that
expects that the patch fed to us is a unified diff with at least
one line of context.
* When there is no leading context line in a hunk, the hunk
must apply at the beginning of the preimage. Similarly, no
trailing context means that the hunk is anchored at the end.
* We learn a patch deletes the file from a hunk that has no
resulting line (i.e. all lines are prefixed with '-') if it
has not otherwise been known if the patch deletes the file.
Similarly, no old line means the file is being created.
And we declare an error condition when the file created by a
creation patch already exists, and/or when a deletion patch
still leaves content in the file.
These sanity checks are good safety measures, but breaks down
when people feed a diff generated with --unified=0. This was
recently noticed first by Matthew Wilcox and Gerrit Pape.
This adds a new flag, --unified-zero, to allow bypassing these
checks. If you are in control of the patch generation process,
you should not use --unified=0 patch and fix it up with this
flag; rather you should try work with a patch with context. But
if all you have to work with is a patch without context, this
flag may come handy as the last resort.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Historically we did not allow binary patch applied without an
explicit permission from the user, and this flag was the way to
do so. This makes the flag a no-op by always allowing binary
patch application.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Like xmalloc and xrealloc xstrdup dies with a useful message if
the native strdup() implementation returns NULL rather than a
valid pointer.
I just tried to use xstrdup in new code and found it to be missing.
However I expected it to be present as xmalloc and xrealloc are
already commonly used throughout the code.
[jc: removed the part that deals with last_XXX, which I am
finding more and more dubious these days.]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
After a failed "git am" attempt:
git apply --reject --verbose .dotest/patch
applies hunks that are applicable and leaves *.rej files the
rejected hunks, and it reports what it is doing. With --index,
files with a rejected hunk do not get their index entries
updated at all, so "git diff" will show the hunks that
successfully got applied.
Without --verbose to remind the user that the patch updated some
other paths cleanly, it is very easy to lose track of the status
of the working tree, so --reject implies --verbose.
Signed-off-by: Junio C Hamano <junkio@cox.net>
builtin-apply.c defines a local variable 'c' which is used only
once and then later gets shadowed by another instance of 'c'.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
builtin-apply.c and builtin-push.c uses a local variable called 'error'
which shadows the error() function.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With the new flag "--reject", hunks that do not apply are sent to
the standard output, and the usable hunks are applied. The command
itself exits with non-zero status when this happens, so that the
user or wrapper can take notice and sort the remaining mess out.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Parsing of a binary hunk did not consume the terminating blank
line. When applying in reverse, it did not use the second,
reverse binary hunk.
Signed-off-by: Junio C Hamano <junkio@cox.net>
[jc: I needed to hand merge the changes to the updated codebase,
so the result needs to be checked.]
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Replace sha1 comparisons to null_sha1 with a global inline (which previously an
unused static inline in builtin-apply.c)
[jc: with a fix from Jonas Fonseca.]
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This cleans up the implementation of "git-apply --binary", and
implements reverse application of binary patches (when git-diff
is converted to emit reversible binary patches).
Earlier, the types of encoding (either deflated literal or
deflated delta) were stored in is_binary field in struct patch,
which meant that we cannot store more than one fragment that
differ in the encoding for a patch. This moves the information
to a field in struct fragment that is otherwise unused for
binary patches, and makes it possible to hang two (or more, but
two is enough) hunks for a binary patch.
The original "binary patch" output from git-diff is internally
parsed into an "is_binary" patch with one fragment. Upcoming
reversible binary patch output will have two fragments, the
first one being the forward patch and the second one the reverse
patch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Having is_reverse in each patch did not make sense. This will hopefully
simplify the work needed to introduce reversible binary diff format.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Most of the callers except the one in refs.c use the function to
update the index file. Among the index writers, everybody
except write-tree dies if they cannot open it for writing.
This gives the function an extra argument, to tell it to die
when it cannot create a new file as the lockfile.
The only caller that does not have to die is write-tree, because
updating the index for the cache-tree part is optional and not
being able to do so does not affect the correctness. I think we
do not have to be so careful and make the failure into die() the
same way as other callers, but that would be a different patch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The internal representation of the result is counted string
(i.e. char *buf and ulong size), which is fine for writing out
to regular file, but throwing the buf at symlink(2) was a
no-no.
Reported by Willy Tarreau.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This changes the calling convention of built-in commands and
passes the "prefix" (i.e. pathname of $PWD relative to the
project root level) down to them.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
On cygwin, when you try to create a symlink over a directory, you do
not get EEXIST, but EACCES.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
A type-change diff is always split into a patch to delete old,
immediately followed by a patch to create new. check_patch()
routine noticed that the path to be created already exists in
the working tree and/or in the index when looking at the
creation patch and mistakenly thought it to be an error.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This reworks write_out_result() loop so we first remove the paths that
are to go away and then create them after finishing all the removal.
This is necessary when a patch creates a file "foo" and removes a file
"foo/bar".
Signed-off-by: Junio C Hamano <junkio@cox.net>
When creating a new file where a directory used to be (or the user had
an empty directory) the code did not check the result from lstat() closely
enough, and mistakenly thought the path already existed in the working tree.
This does not fix the problem where you have a patch that creates a file
at "foo" and removes a file at "foo/bar" (which presumably is the last file
in "foo/" directory in the original). For that, we would need to restructure
write_out_results() loop.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This doesn't make the code uglier or harder to read, yet it makes the
code more portable. This also simplifies checking for other potential
incompatibilities. "gcc -std=c89 -pedantic" can flag many incompatible
constructs as warnings, but C99 comments will cause it to emit an error.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The only visible change is that git-blame doesn't understand
"--compability" anymore, but it does accept "--compatibility" instead,
which is already documented.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It does not make much sense to build git whose behaviour is
different depending on the brokenness of diff implementation of
the platform because the brokenness of the patch that is applied
with the tool depends on brokenness of the diff the person who
generates the patch uses. So we do not use NO_ACCURATE_DIFF
anymore, but help people to apply patches that do not record
incomplete lines correctly with a runtime flag.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
ANSI C99 doesn't allow void-pointer arithmetic. This patch fixes this in
various ways. Usually the strategy that required the least changes was used.
Signed-off-by: Florian Forster <octo@verplant.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The framework to create lockfiles that are removed at exit is
first used to reliably write the index file, but it is
applicable to other things, so stop calling it "cache_file".
This also rewords a few remaining error message that called the
index file "cache file".
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/cache-tree: (26 commits)
builtin-rm: squelch compiler warnings.
git-write-tree writes garbage on sparc64
Fix crash when reading the empty tree
fsck-objects: do not segfault on missing tree in cache-tree
cache-tree: a bit more debugging support.
read-tree: invalidate cache-tree entry when a new index entry is added.
Fix test-dump-cache-tree in one-tree disappeared case.
fsck-objects: mark objects reachable from cache-tree
cache-tree: replace a sscanf() by two strtol() calls
cache-tree.c: typefix
test-dump-cache-tree: validate the cached data as well.
cache_tree_update: give an option to update cache-tree only.
read-tree: teach 1-way merege and plain read to prime cache-tree.
read-tree: teach 1 and 2 way merges about cache-tree.
update-index: when --unresolve, smudge the relevant cache-tree entries.
test-dump-cache-tree: report number of subtrees.
cache-tree: sort the subtree entries.
Teach fsck-objects about cache-tree.
index: make the index file format extensible.
cache-tree: protect against "git prune".
...
Conflicts:
Makefile, builtin.h, git.c: resolved the same way as in next.
* master: (40 commits)
Clean up sha1 file writing
Builtin git-cat-file
builtin format-patch: squelch content-type for 7-bit ASCII
CMIT_FMT_EMAIL: Q-encode Subject: and display-name part of From: fields.
add more informative error messages to git-mktag
remove the artificial restriction tagsize < 8kb
git-rebase: use canonical A..B syntax to format-patch
git-format-patch: now built-in.
fmt-patch: Support --attach
fmt-patch: understand old <his> notation
Teach fmt-patch about --keep-subject
Teach fmt-patch about --numbered
fmt-patch: implement -o <dir>
fmt-patch: output file names to stdout
Teach fmt-patch to write individual files.
Use RFC2822 dates from "git fmt-patch".
git-fmt-patch: thinkofix to show [PATCH] properly.
rename internal format-patch wip
Minor tweak on subject line in --pretty=email
Tentative built-in format-patch.
...
