This makes erroneous output slightly easier to see. We also
flip the argument order to match our usual style.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
format-patch is most commonly used for multiple patches at once when
sending a patchset, in which case we want to number the patches; on
the other hand, single patches are not usually expected to be
numbered.
In other words, the typical behavior expected from format-patch is the
one obtained by enabling autonumber, so we set it to be the default.
Users that want to disable numbering for a particular patchset can do
so with the existing -N command-line switch. Users that want to
change the default behavior can use the format.numbering config key.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Test-updates-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Win32 does not allow renaming read-only files (at least on a Samba
share), making push into a local directory to fail. Thus, defer
the chmod() call in index-pack.c:final() only after
move_temp_to_file() was called.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* pb/commit-where:
tutorial: update output of git commit
reformat informational commit message
git commit: Reformat output somewhat
builtin-commit.c: show on which branch a commit was added
With all calls to alloc_ref() gone, we can remove it and then we're free
to give alloc_ref_from_str() the shorter name. It's a much nicer
interface, as the callers always need to have a name string when they
allocate a ref anyway and don't need to calculate and pass its length+1
any more.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace pairs of alloc_ref() and strcpy() with alloc_ref_from_str(),
simplifying the code.
In connect.c, also a pair of alloc_ref() and memcpy() is replaced --
the additional cost of a strlen() call should not have too much of an
impact. Consistency and simplicity are more important.
In remote.c, the code was allocating 11 bytes more than needed for
the name part, but I couldn't see them being used for anything.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In three cases in remote.c, a "raw" ref is allocated using alloc_ref()
and then its is constructed using sprintf(). Clean it up by adding a
helper function, alloc_ref_with_prefix(), which creates a composite
name. Use it in alloc_ref_from_str(), too, as it simplifies the code.
Open code alloc_ref() in alloc_ref_with_prefix(), as the former is
going to be removed in the patch after the next.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
read_packed_sha1 expectes its caller to free the buffer it returns, which
force_object_loose didn't do.
This leak is eventually triggered by "git gc", when it is manually invoked
or there are too many packs around, making gc totally unusable when there
are lots of unreachable objects.
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no need to keep the base object data around after its last delta
has been resolved. This also means that long delta chains with only one
delta per base won't grow the cache size unnecessarily as the base will
be freed before recursing down.
To make it easy, find_delta_children() is modified so the first and last
indices are initialized in all cases.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of having strange loops for walking unresolved deltas with the
same base duplicated in many places, let's rework the code so this is
done in a single place instead. This simplifies callers quite a bit too.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the result of running make update-po and removing or fixing
the strings that were fuzzily matched. The ones that were fixed were
the ones where the only change was "git rev-list" to "git log", and
the "about gitk" message where the copyright year got updated.
To get xgettext to see the menu labels as needing translation, it
was necessary for arrange for them to be preceded by "mc". This
therefore changes makemenu to ignore the first element in each
menu item so that it can be "mc" in the makemenu call.
Signed-off-by: Paul Mackerras <paulus@samba.org>
The test to make sure that checkout fails when --track was asked for and
we cannot set up tracking information in t7201 was wrong, and it turns out
that the implementation for that feature itself was buggy. This fixes it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the "git status" display code was originally converted
to C, we copied the code from ls-files to discover whether a
pathname returned by read_directory was an "other", or
untracked, file.
Much later, 5698454e updated the code in ls-files to handle
some new cases caused by gitlinks. This left the code in
wt-status.c broken: it would display submodule directories
as untracked directories. Nobody noticed until now, however,
because unless status.showUntrackedFiles was set to "all",
submodule directories were not actually reported by
read_directory. So the bug was only triggered in the
presence of a submodule _and_ this config option.
This patch pulls the ls-files code into a new function,
cache_name_is_other, and uses it in both places. This should
leave the ls-files functionality the same and fix the bug
in status.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the caller supplies --tags they want the lightweight, unannotated
tags to be searched for a match. If a lightweight tag is closer
in the history, it should be matched, even if an annotated tag is
reachable further back in the commit chain.
The same applies with --all when matching any other type of ref.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Acked-By: Uwe Kleine-König <ukleinek@strlen.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 969c8775 introduced a test which uses the non-portable construct:
command1 && ! command2 | command3
which must be
command1 && ! (command2 | command3)
to work on bsd shells (this is another example of bbf08124, which fixed
several similar cases).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some misguided documents floating on the Net suggest this sequence:
mkdir newdir && cd newdir
git init
git remote add origin $url
git pull origin master:master
"git pull" has known about misguided "pull" that lets the underlying fetch
update the current branch for a long time. It also has known about
"git pull origin master" into a branch yet to be born.
These two workarounds however were not aware of the existence of each
other and did not work well together. This fixes it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is inspired by patches from Robin Rosenberg but takes a different
approach. This adds a "makemenu" procedure for constructing menus
that allows the menu layout to be specified in a clear fashion, and
provides one place where the alt+letter accelerators can be detected
and handled.
The alt+letter accelerator is specified by putting an ampersand (&)
before the letter for the accelerator in the menu item name. (Two
ampersands in succession produce one ampersand in the menu item as
it appears on screen.) This is handled in makemenu.
We also add an mca procedure which is like mc but also does the
ampersand translation, for use when we want to refer to a menu item
by name. The mca name and the locations where we use it were
shamelessly stolen from Robin Rosenberg's patch.
This doesn't actually add any alt+letter accelerators yet.
Signed-off-by: Paul Mackerras <paulus@samba.org>
* maint:
t1301-shared-repo.sh: don't let a default ACL interfere with the test
git-check-attr(1): add output and example sections
xdiff-interface.c: strip newline (and cr) from line before pattern matching
t4018-diff-funcname: demonstrate end of line funcname matching flaw
t4018-diff-funcname: rework negated last expression test
Typo "does not exists" when git remote update remote.
remote.c: correct the check for a leading '/' in a remote name
Add testcase to ensure merging an early part of a branch is done properly
Conflicts:
t/t7600-merge.sh
This test creates files with several different umasks and expects their
permissions to be initialized according to the umask, so a default ACL on the
trash directory (which overrides the umask for files created in that directory)
causes the test to fail. To avoid that, remove the default ACL if possible with
setfacl(1).
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This seems like the best guess we can make until git sequencer marks are
available. That being said, within the context of re-ordering a commit before
its parent in todo, I think applying it on top of the current commit seems like
a reasonable assumption of what the user intended.
Signed-off-by: Stephen Haberman <stephen@exigencecorp.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This covers an odd boundary case found by Avi Kivity's script where a branch
coming off of UPSTREAM is merged into HEAD. Initially it show up in
UPSTREAM..HEAD, but technically UPSTREAM is not moving, the rest of head is, so
we should not need to rewrite the merge.
This adds a check saying we can keep `preserve=t` if `p=UPSTREAM`...unless this
is the first first-parent commit in our UPSTREAM..HEAD rev-list, which could
very well point to UPSTREAM, but we still need to consider it as rewritten so we
start pulling in the rest of the UPSTREAM..HEAD commits that point to it.
Signed-off-by: Stephen Haberman <stephen@exigencecorp.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is heavily based on Stephan Beyer's git sequencer rewrite of rebase-i-p.
Each commit is still found by rev-list UPSTREAM..HEAD, but a commit is only
included in todo if at least one its parents has been marked for rewriting.
Signed-off-by: Stephen Haberman <stephen@exigencecorp.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also only check out the first parent if this commit if not a squash--if it is a
squash, we want to explicitly ignore the parent and leave the wc as is, as
cherry-pick will apply the squash on top of it.
Signed-off-by: Stephen Haberman <stephen@exigencecorp.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the current-commit was dumped to REWRITTEN, but then we squash the next
commit in to it, we have invalidated the HEAD was just written to REWRITTEN.
Instead, append the squash hash to current-commit and save both of them the next
time around.
Signed-off-by: Stephen Haberman <stephen@exigencecorp.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If OLDHEAD was reordered in the todo, and its mapped NEWHEAD was used to set the
ref, commits reordered after OLDHEAD in the todo would should up as un-committed
changes.
Signed-off-by: Stephen Haberman <stephen@exigencecorp.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first case was based off a script from Avi Kivity <avi@redhat.com>.
The second case includes a merge-of-a-merge to ensure both are included in todo.
Signed-off-by: Stephen Haberman <stephen@exigencecorp.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`rebase -i -p` got its rev-list of commits to keep by --left-right and
--cherry-pick. Adding --cherry-pick would drop commits that duplicated changes
already in the rebase target.
The dropped commits were then forgotten about when it came to rewriting the
parents of their descendents, so the descendents would get cherry-picked with
their old, unwritten parents and essentially make the rebase a no-op.
This commit adds a $DOTEST/dropped directory to remember dropped commits and
rewrite their children's parent as the dropped commit's possibly-rewritten
first-parent.
Signed-off-by: Stephen Haberman <stephen@exigencecorp.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Plumbing tools should document what output can be expected.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
POSIX doth sayeth:
"In the regular expression processing described in IEEE Std 1003.1-2001,
the <newline> is regarded as an ordinary character and both a period and
a non-matching list can match one. ... Those utilities (like grep) that
do not allow <newline>s to match are responsible for eliminating any
<newline> from strings before matching against the RE."
Thus far git has not been removing the trailing newline from strings matched
against regular expression patterns. This has the effect that (quoting
Jonathan del Strother) "... a line containing just 'FUNCNAME' (terminated by
a newline) will be matched by the pattern '^(FUNCNAME.$)' but not
'^(FUNCNAME$)'", and more simply not '^FUNCNAME$'.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Since the newline is not removed from lines before pattern matching, a
pattern cannot match to the end of the line using the '$' operator without
using an additional operator which will indirectly match the '\n' character.
Introduce a test which should pass, but which does not due to this flaw.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test used the non-zero exit status of 'git diff' to indicate that a
negated funcname pattern, when placed last, was correctly rejected.
The problem with this is that 'git diff' always returns non-zero if it
finds differences in the files it is comparing, and the files must
contain differences in order to trigger the funcname pattern codepath.
Instead of checking for non-zero exit status, make sure the expected
error message is printed.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Return key can now be used as well as pressing the Create button
from the dialog box that is shown when selecting "Create new branch".
Signed-off-by: Richard Quirk <richard.quirk@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This adds a break so that gitk doesn't go and execute the global
binding for <Return> (i.e. find next) when the user presses the
return key in the sha1 entry field to indicate that gitk should
jump to the commit identified by what they just put into the
sha1 field.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This adds an option allowing the user to select whether gitk should
look up per-file encoding settings using git check-attr or not. If
not, gitk uses the global encoding set in the git config (as reported
by git config --get gui.encoding) for all files, or if that is not
set, then the system encoding.
The option is controlled by a checkbox in the Edit->Preferences
window, and defaults to off for now because git check-attr is so
slow. When the user turns it on we discard any cached diff file
lists in treediffs, because we may not have encodings cached for
the files listed in those lists, meaning that getblobdiffline will
do it for each file, which will be really really slow.
This adjusts the limit of how many paths cache_gitattr passes to each
instance of git check-attr depending on whether we're running under
windows or not. Passing only 30 doesn't effectively amortize the
startup costs of git check-attr, but it's all we can do under windows
because of the 32k limit on arguments to a command. Under other OSes
we pass up to 1000.
Similarly we adjust how many lines gettreediffline processes depending
on whether we are doing per-file encodings so that we don't run for
too long. When we are, 500 seems to be a reasonable limit, leading
to gettreediffline taking about 60-70ms under Linux (almost all of
which is in cache_gitattr, unfortunately). This means that we can
take out the update call in cache_gitattr.
This adds a simple cache on [tclencoding]. Now that we get repeated
calls to translate the same encoding, this is useful.
This reindents the new code added in the last couple of commits to
conform to the gitk 4-space indent and makes various other improvements:
use regexp in gitattr and cache_gitattr instead of split + join + regsub,
make gui_encoding be the value from [tclencoding] to avoid having to
do [tcl_encoding $gui_encoding] in each call to get_path_encoding,
and print a warning message at startup if $gui_encoding isn't
supported by Tcl.
Signed-off-by: Paul Mackerras <paulus@samba.org>
The projectroot path could have SP in it, in which case iterating over
<$git_dir/ctags/*> does not correctly enumerate the cloud tags files at
all.
This can be observed by creating an empty t/trash directory and running
t9500 test. The $projectroot ends with "trash directory.t9500-gitweb-/"
and <$glob> would give "trash", which can be opened and reading from it
immediately yields undef, which in turn gives an undef value warning to
the standard error stream upon attempt to chomp it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test is supposed to disallow remote entries in the config file of the
form:
[remote "/foobar"]
...
The leading slash in '/foobar' is not acceptable.
Instead it was incorrectly testing that the subkey had no leading '/', which
had no effect since the subkey pointer was made to point at a '.' in the
preceding lines.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the diff contains thousands of files, calling git-check-attr once
per file is very slow. With this patch gitk does attribute lookup in
batches of 30 files while reading the diff file list, which leads to a
very noticeable speedup.
It may be possible to reimplement this even more efficiently, if
git-check-attr is modified to support a --stdin-paths option.
Additionally, it should quote the ':' character in file paths, or
provide a more robust way of column separation.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Tested-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This allows the encoding to be specified for file contents and used
when displaying files and diffs in the bottom-left pane. When
displaying diffs, the encoding for each diff hunk is that for the file
that the diff hunk is from, so it can change through the course of the
diff.
The encoding for file contents is determined as follows:
- File encoding defaults to the system encoding.
- It can be overridden by setting the gui.encoding option.
- Finally, the 'encoding' attribute is checked on
per-file basis; it has the last word.
Note: Since git-check-attr does not provide support for reading
attributes from trees, attribute lookup is done using files from the
working directory.
This also extends the range of supported encoding names, adding
ShiftJIS and Shift-JIS as aliases for Shift_JIS, and allowing
cp-*, cp_*, ibm-*, ibm_*, jis-* and jis_* as aliases for cp*,
ibm* and jis* respectively.
This also fixes some bugs in handling of non-ASCII filenames. Core
git apparently supports only locale-encoded filenames, so processing
is done using the system encoding.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Tested-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Cygwin's POSIX emulation allows use of core.filemode true, unlike native
Window's implementation of stat / lstat, and Cygwin/git users who have
configured core.filemode true in various repositories will be very
unpleasantly surprised to find that git is no longer honoring that option.
So, this patch forces use of Cygwin's stat functions if core.filemode is
set true, regardless of any other considerations.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
