The delta_limit parameter to diffcore_count_changes() has been unused
since commit ba23bbc8e ("diffcore-delta: make change counter to byte
oriented again.", 2006-03-04).
Remove the parameter and adjust all callers.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When new paths were added by "git add -N" to the index, it was
enough to circumvent the check by "git commit" to refrain from
making an empty commit without "--allow-empty". The same logic
prevented "git status" to show such a path as "new file" in the
"Changes not staged for commit" section.
* nd/ita-empty-commit:
commit: don't be fooled by ita entries when creating initial commit
commit: fix empty commit creation when there's no changes but ita entries
diff: add --ita-[in]visible-in-index
diff-lib: allow ita entries treated as "not yet exist in index"
Update "git diff --no-index" codepath not to try to peek into .git/
directory that happens to be under the current directory, when we
know we are operating outside any repository.
* jk/no-looking-at-dotgit-outside-repo:
diff: handle sha1 abbreviations outside of repository
diff_aligned_abbrev: use "struct oid"
diff_unique_abbrev: rename to diff_aligned_abbrev
find_unique_abbrev: use 4-buffer ring
test-*-cache-tree: setup git dir
read info/{attributes,exclude} only when in repository
Allow the default abbreviation length, which has historically been
7, to scale as the repository grows. The logic suggests to use 12
hexdigits for the Linux kernel, and 9 to 10 for Git itself.
* lt/abbrev-auto:
abbrev: auto size the default abbreviation
abbrev: prepare for new world order
abbrev: add FALLBACK_DEFAULT_ABBREV to prepare for auto sizing
When generating diffs outside a repository (e.g., with "diff
--no-index"), we may write abbreviated sha1s as part of
"--raw" output or the "index" lines of "--patch" output.
Since we have no object database, we never find any
collisions, and these sha1s get whatever static abbreviation
length is configured (typically 7).
However, we do blindly look in ".git/objects" to see if any
objects exist, even though we know we are not in a
repository. This is usually harmless because such a
directory is unlikely to exist, but could be wrong in rare
circumstances.
Let's instead notice when we are not in a repository and
behave as if the object database is empty (i.e., just use
the default abbrev length). It would perhaps make sense to
be conservative and show full sha1s in that case, but
showing the default abbreviation is what we've always done
(and is certainly less ugly).
Note that this does mean that:
cd /not/a/repo
GIT_OBJECT_DIRECTORY=/some/real/objdir git diff --no-index ...
used to look for collisions in /some/real/objdir but now
does not. This could be considered either a bugfix (we do
not look at objects if we have no repository) or a
regression, but it seems unlikely that anybody would care
much either way.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we're modifying this function anyway, it's a good time
to update it to the more modern "struct oid". We can also
drop some of the magic numbers in favor of GIT_SHA1_HEXSZ,
along with some descriptive comments.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The word "align" describes how the function actually differs
from find_unique_abbrev, and will make it less confusing
when we add more diff-specific abbrevation functions that do
not do this alignment.
Since this is a globally available function, let's also move
its descriptive comment to the header file, where we
typically document function interfaces.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
More i18n.
* va/i18n:
i18n: diff: mark warnings for translation
i18n: credential-cache--daemon: mark advice for translation
i18n: convert mark error messages for translation
i18n: apply: mark error message for translation
i18n: apply: mark error messages for translation
i18n: apply: mark info messages for translation
i18n: apply: mark plural string for translation
"git diff/log --ws-error-highlight=<kind>" lacked the corresponding
configuration variable to set it by default.
* jc/ws-error-highlight:
diff: introduce diff.wsErrorHighlight option
diff.c: move ws-error-highlight parsing helpers up
diff.c: refactor parse_ws_error_highlight()
t4015: split out the "setup" part of ws-error-highlight test
The option --ita-invisible-in-index exposes the "ita_invisible_in_index"
diff flag to outside to allow easier experimentation with this new mode.
The "plan" is to make --ita-invisible-in-index default to keep consistent
behavior with 'status' and 'commit', but a bunch other commands like
'apply', 'merge', 'reset'.... need to be taken into consideration as well.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark rename_limit_warning and degrade_cc_to_c_warning and
rename_limit_warning for translation.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We call "qsort(array, nelem, sizeof(array[0]), fn)", and most of
the time third parameter is redundant. A new QSORT() macro lets us
omit it.
* rs/qsort:
show-branch: use QSORT
use QSORT, part 2
coccicheck: use --all-includes by default
remove unnecessary check before QSORT
use QSORT
add QSORT
Code clean-up with help from coccinelle tool continues.
* rs/cocci:
coccicheck: make transformation for strbuf_addf(sb, "...") more precise
use strbuf_add_unique_abbrev() for adding short hashes, part 2
use strbuf_addstr() instead of strbuf_addf() with "%s", part 2
gitignore: ignore output files of coccicheck make target
With the preparatory steps, it has become trivial to teach the
system a new diff.wsErrorHighlight configuration that gives the
default value for --ws-error-highlight command line option.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These need to be usable from git_diff_ui_config() code to help
parsing a configuration variable, so move them up.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the function to parse_ws_error_highlight_opt(), because it is
meant to parse a command line option, and then refactor the meat of
the function into a helper function that reports the parsed result
which is typically a small unsigned int (these are OR'ed bitmask
after all), or a negative offset that indicates where in the input
string a parse error happened.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code that sets custom abbreviation length, in response to
command line argument, often does something like this:
if (skip_prefix(arg, "--abbrev=", &arg))
abbrev = atoi(arg);
else if (!strcmp("--abbrev", &arg))
abbrev = DEFAULT_ABBREV;
/* make the value sane */
if (abbrev < 0 || 40 < abbrev)
abbrev = ... some sane value ...
However, it is pointless to sanity-check and tweak the value
obtained from DEFAULT_ABBREV. We are going to allow it to be
initially set to -1 to signal that the default abbreviation length
must be auto sized upon the first request to abbreviate, based on
the number of objects in the repository, and when that happens,
rejecting or tweaking a negative value to a "saner" one will
negatively interfere with the auto sizing. The codepaths for
git rev-parse --short <object>
git diff --raw --abbrev
do exactly that; allow them to pass possibly negative abbrevs
intact, that will come from DEFAULT_ABBREV in the future.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is used to add "..." to displayed object names in
"diff --raw --abbrev[=<n>]" output. It bases its behaviour on an
untold assumption that the abbreviation length requested by the
caller is "reasonble", i.e. most of the objects will abbreviate
within the requested length and the resulting length would never
exceed it by more than a few hexdigits (otherwise the resulting
columns would not align). Explain that in a comment.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some codepaths in "git diff" used regexec(3) on a buffer that was
mmap(2)ed, which may not have a terminating NUL, leading to a read
beyond the end of the mapped region. This was fixed by introducing
a regexec_buf() helper that takes a <ptr,len> pair with REG_STARTEND
extension.
* js/regexec-buf:
regex: use regexec_buf()
regex: add regexec_buf() that can work on a non NUL-terminated string
regex: -G<pattern> feeds a non NUL-terminated string to regexec() and fails
Apply the semantic patch contrib/coccinelle/qsort.cocci to the code
base, replacing calls of qsort(3) with QSORT. The resulting code is
shorter and supports empty arrays with NULL pointers.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call strbuf_add_unique_abbrev() to add abbreviated hashes to strbufs
instead of taking detours through find_unique_abbrev() and its static
buffer. This is shorter and a bit more efficient.
1eb47f167d already converted six cases,
this patch covers three more.
A semantic patch for Coccinelle is included for easier checking for
new cases that might be introduced in the future.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some codepaths in "git diff" used regexec(3) on a buffer that was
mmap(2)ed, which may not have a terminating NUL, leading to a read
beyond the end of the mapped region. This was fixed by introducing
a regexec_buf() helper that takes a <ptr,len> pair with REG_STARTEND
extension.
* js/regexec-buf:
regex: use regexec_buf()
regex: add regexec_buf() that can work on a non NUL-terminated string
regex: -G<pattern> feeds a non NUL-terminated string to regexec() and fails
Even more i18n.
* va/i18n-more:
i18n: stash: mark messages for translation
i18n: notes-merge: mark die messages for translation
i18n: ident: mark hint for translation
i18n: i18n: diff: mark die messages for translation
i18n: connect: mark die messages for translation
i18n: commit: mark message for translation
Output from "git diff" can be made easier to read by selecting
which lines are common and which lines are added/deleted
intelligently when the lines before and after the changed section
are the same. A command line option is added to help with the
experiment to find a good heuristics.
* mh/diff-indent-heuristic:
blame: honor the diff heuristic options and config
parse-options: add parse_opt_unknown_cb()
diff: improve positioning of add/delete blocks in diffs
xdl_change_compact(): introduce the concept of a change group
recs_match(): take two xrecord_t pointers as arguments
is_blank_line(): take a single xrecord_t as argument
xdl_change_compact(): only use heuristic if group can't be matched
xdl_change_compact(): fix compaction heuristic to adjust ixo
The new regexec_buf() function operates on buffers with an explicitly
specified length, rather than NUL-terminated strings.
We need to use this function whenever the buffer we want to pass to
regexec(3) may have been mmap(2)ed (and is hence not NUL-terminated).
Note: the original motivation for this patch was to fix a bug where
`git diff -G <regex>` would crash. This patch converts more callers,
though, some of which allocated to construct NUL-terminated strings,
or worse, modified buffers to temporarily insert NULs while calling
regexec(3). By converting them to use regexec_buf(), the code has
become much cleaner.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While marking individual messages for translation, consolidate some
messages "option 'foo' requires a value" that is used for many
options into one by introducing a helper function to die with the
message with the option name embedded in it, and ask the translators
to localize that single message instead.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Jean-Noel Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "unsigned char sha1[20]" to "struct object_id" conversion
continues. Notable changes in this round includes that ce->sha1,
i.e. the object name recorded in the cache_entry, turns into an
object_id.
It had merge conflicts with a few topics in flight (Christian's
"apply.c split", Dscho's "cat-file --filters" and Jeff Hostetler's
"status --porcelain-v2"). Extra sets of eyes double-checking for
mismerges are highly appreciated.
* bc/object-id:
builtin/reset: convert to use struct object_id
builtin/commit-tree: convert to struct object_id
builtin/am: convert to struct object_id
refs: add an update_ref_oid function.
sha1_name: convert get_sha1_mb to struct object_id
builtin/update-index: convert file to struct object_id
notes: convert init_notes to use struct object_id
builtin/rm: convert to use struct object_id
builtin/blame: convert file to use struct object_id
Convert read_mmblob to take struct object_id.
notes-merge: convert struct notes_merge_pair to struct object_id
builtin/checkout: convert some static functions to struct object_id
streaming: make stream_blob_to_fd take struct object_id
builtin: convert textconv_object to use struct object_id
builtin/cat-file: convert some static functions to struct object_id
builtin/cat-file: convert struct expand_data to use struct object_id
builtin/log: convert some static functions to use struct object_id
builtin/blame: convert struct origin to use struct object_id
builtin/apply: convert static functions to struct object_id
cache: convert struct cache_entry to use struct object_id
Teach "git blame" and "git annotate" the --compaction-heuristic and
--indent-heuristic options that are now supported by "git diff".
Also teach them to honor the `diff.compactionHeuristic` and
`diff.indentHeuristic` configuration options.
It would be conceivable to introduce separate configuration options for
"blame" and "annotate"; for example `blame.compactionHeuristic` and
`blame.indentHeuristic`. But it would be confusing to users if blame
output is inconsistent with diff output, so it makes more sense for them
to respect the same configuration.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some groups of added/deleted lines in diffs can be slid up or down,
because lines at the edges of the group are not unique. Picking good
shifts for such groups is not a matter of correctness but definitely has
a big effect on aesthetics. For example, consider the following two
diffs. The first is what standard Git emits:
--- a/9c572b21dd090a1e5c5bb397053bf8043ffe7fb4:git-send-email.perl
+++ b/6dcfa306f2b67b733a7eb2d7ded1bc9987809edb:git-send-email.perl
@@ -231,6 +231,9 @@ if (!defined $initial_reply_to && $prompting) {
}
if (!$smtp_server) {
+ $smtp_server = $repo->config('sendemail.smtpserver');
+}
+if (!$smtp_server) {
foreach (qw( /usr/sbin/sendmail /usr/lib/sendmail )) {
if (-x $_) {
$smtp_server = $_;
The following diff is equivalent, but is obviously preferable from an
aesthetic point of view:
--- a/9c572b21dd090a1e5c5bb397053bf8043ffe7fb4:git-send-email.perl
+++ b/6dcfa306f2b67b733a7eb2d7ded1bc9987809edb:git-send-email.perl
@@ -230,6 +230,9 @@ if (!defined $initial_reply_to && $prompting) {
$initial_reply_to =~ s/(^\s+|\s+$)//g;
}
+if (!$smtp_server) {
+ $smtp_server = $repo->config('sendemail.smtpserver');
+}
if (!$smtp_server) {
foreach (qw( /usr/sbin/sendmail /usr/lib/sendmail )) {
if (-x $_) {
This patch teaches Git to pick better positions for such "diff sliders"
using heuristics that take the positions of nearby blank lines and the
indentation of nearby lines into account.
The existing Git code basically always shifts such "sliders" as far down
in the file as possible. The only exception is when the slider can be
aligned with a group of changed lines in the other file, in which case
Git favors depicting the change as one add+delete block rather than one
add and a slightly offset delete block. This naive algorithm often
yields ugly diffs.
Commit d634d61ed6 improved the situation somewhat by preferring to
position add/delete groups to make their last line a blank line, when
that is possible. This heuristic does more good than harm, but (1) it
can only help if there are blank lines in the right places, and (2)
always picks the last blank line, even if there are others that might be
better. The end result is that it makes perhaps 1/3 as many errors as
the default Git algorithm, but that still leaves a lot of ugly diffs.
This commit implements a new and much better heuristic for picking
optimal "slider" positions using the following approach: First observe
that each hypothetical positioning of a diff slider introduces two
splits: one between the context lines preceding the group and the first
added/deleted line, and the other between the last added/deleted line
and the first line of context following it. It tries to find the
positioning that creates the least bad splits.
Splits are evaluated based only on the presence and locations of nearby
blank lines, and the indentation of lines near the split. Basically, it
prefers to introduce splits adjacent to blank lines, between lines that
are indented less, and between lines with the same level of indentation.
In more detail:
1. It measures the following characteristics of a proposed splitting
position in a `struct split_measurement`:
* the number of blank lines above the proposed split
* whether the line directly after the split is blank
* the number of blank lines following that line
* the indentation of the nearest non-blank line above the split
* the indentation of the line directly below the split
* the indentation of the nearest non-blank line after that line
2. It combines the measured attributes using a bunch of
empirically-optimized weighting factors to derive a `struct
split_score` that measures the "badness" of splitting the text at
that position.
3. It combines the `split_score` for the top and the bottom of the
slider at each of its possible positions, and selects the position
that has the best `split_score`.
I determined the initial set of weighting factors by collecting a corpus
of Git histories from 29 open-source software projects in various
programming languages. I generated many diffs from this corpus, and
determined the best positioning "by eye" for about 6600 diff sliders. I
used about half of the repositories in the corpus (corresponding to
about 2/3 of the sliders) as a training set, and optimized the weights
against this corpus using a crude automated search of the parameter
space to get the best agreement with the manually-determined values.
Then I tested the resulting heuristic against the full corpus. The
results are summarized in the following table, in column `indent-1`:
| repository | count | Git 2.9.0 | compaction | compaction-fixed | indent-1 | indent-2 |
| --------------------- | ----- | -------------- | -------------- | ---------------- | -------------- | -------------- |
| afnetworking | 109 | 89 (81.7%) | 37 (33.9%) | 37 (33.9%) | 2 (1.8%) | 2 (1.8%) |
| alamofire | 30 | 18 (60.0%) | 14 (46.7%) | 15 (50.0%) | 0 (0.0%) | 0 (0.0%) |
| angular | 184 | 127 (69.0%) | 39 (21.2%) | 23 (12.5%) | 5 (2.7%) | 5 (2.7%) |
| animate | 313 | 2 (0.6%) | 2 (0.6%) | 2 (0.6%) | 2 (0.6%) | 2 (0.6%) |
| ant | 380 | 356 (93.7%) | 152 (40.0%) | 148 (38.9%) | 15 (3.9%) | 15 (3.9%) | *
| bugzilla | 306 | 263 (85.9%) | 109 (35.6%) | 99 (32.4%) | 14 (4.6%) | 15 (4.9%) | *
| corefx | 126 | 91 (72.2%) | 22 (17.5%) | 21 (16.7%) | 6 (4.8%) | 6 (4.8%) |
| couchdb | 78 | 44 (56.4%) | 26 (33.3%) | 28 (35.9%) | 6 (7.7%) | 6 (7.7%) | *
| cpython | 937 | 158 (16.9%) | 50 (5.3%) | 49 (5.2%) | 5 (0.5%) | 5 (0.5%) | *
| discourse | 160 | 95 (59.4%) | 42 (26.2%) | 36 (22.5%) | 18 (11.2%) | 13 (8.1%) |
| docker | 307 | 194 (63.2%) | 198 (64.5%) | 253 (82.4%) | 8 (2.6%) | 8 (2.6%) | *
| electron | 163 | 132 (81.0%) | 38 (23.3%) | 39 (23.9%) | 6 (3.7%) | 6 (3.7%) |
| git | 536 | 470 (87.7%) | 73 (13.6%) | 78 (14.6%) | 16 (3.0%) | 16 (3.0%) | *
| gitflow | 127 | 0 (0.0%) | 0 (0.0%) | 0 (0.0%) | 0 (0.0%) | 0 (0.0%) |
| ionic | 133 | 89 (66.9%) | 29 (21.8%) | 38 (28.6%) | 1 (0.8%) | 1 (0.8%) |
| ipython | 482 | 362 (75.1%) | 167 (34.6%) | 169 (35.1%) | 11 (2.3%) | 11 (2.3%) | *
| junit | 161 | 147 (91.3%) | 67 (41.6%) | 66 (41.0%) | 1 (0.6%) | 1 (0.6%) | *
| lighttable | 15 | 5 (33.3%) | 0 (0.0%) | 2 (13.3%) | 0 (0.0%) | 0 (0.0%) |
| magit | 88 | 75 (85.2%) | 11 (12.5%) | 9 (10.2%) | 1 (1.1%) | 0 (0.0%) |
| neural-style | 28 | 0 (0.0%) | 0 (0.0%) | 0 (0.0%) | 0 (0.0%) | 0 (0.0%) |
| nodejs | 781 | 649 (83.1%) | 118 (15.1%) | 111 (14.2%) | 4 (0.5%) | 5 (0.6%) | *
| phpmyadmin | 491 | 481 (98.0%) | 75 (15.3%) | 48 (9.8%) | 2 (0.4%) | 2 (0.4%) | *
| react-native | 168 | 130 (77.4%) | 79 (47.0%) | 81 (48.2%) | 0 (0.0%) | 0 (0.0%) |
| rust | 171 | 128 (74.9%) | 30 (17.5%) | 27 (15.8%) | 16 (9.4%) | 14 (8.2%) |
| spark | 186 | 149 (80.1%) | 52 (28.0%) | 52 (28.0%) | 2 (1.1%) | 2 (1.1%) |
| tensorflow | 115 | 66 (57.4%) | 48 (41.7%) | 48 (41.7%) | 5 (4.3%) | 5 (4.3%) |
| test-more | 19 | 15 (78.9%) | 2 (10.5%) | 2 (10.5%) | 1 (5.3%) | 1 (5.3%) | *
| test-unit | 51 | 34 (66.7%) | 14 (27.5%) | 8 (15.7%) | 2 (3.9%) | 2 (3.9%) | *
| xmonad | 23 | 22 (95.7%) | 2 (8.7%) | 2 (8.7%) | 1 (4.3%) | 1 (4.3%) | *
| --------------------- | ----- | -------------- | -------------- | ---------------- | -------------- | -------------- |
| totals | 6668 | 4391 (65.9%) | 1496 (22.4%) | 1491 (22.4%) | 150 (2.2%) | 144 (2.2%) |
| totals (training set) | 4552 | 3195 (70.2%) | 1053 (23.1%) | 1061 (23.3%) | 86 (1.9%) | 88 (1.9%) |
| totals (test set) | 2116 | 1196 (56.5%) | 443 (20.9%) | 430 (20.3%) | 64 (3.0%) | 56 (2.6%) |
In this table, the numbers are the count and percentage of human-rated
sliders that the corresponding algorithm got *wrong*. The columns are
* "repository" - the name of the repository used. I used the diffs
between successive non-merge commits on the HEAD branch of the
corresponding repository.
* "count" - the number of sliders that were human-rated. I chose most,
but not all, sliders to rate from those among which the various
algorithms gave different answers.
* "Git 2.9.0" - the default algorithm used by `git diff` in Git 2.9.0.
* "compaction" - the heuristic used by `git diff --compaction-heuristic`
in Git 2.9.0.
* "compaction-fixed" - the heuristic used by `git diff
--compaction-heuristic` after the fixes from earlier in this patch
series. Note that the results are not dramatically different than
those for "compaction". Both produce non-ideal diffs only about 1/3 as
often as the default `git diff`.
* "indent-1" - the new `--indent-heuristic` algorithm, using the first
set of weighting factors, determined as described above.
* "indent-2" - the new `--indent-heuristic` algorithm, using the final
set of weighting factors, determined as described below.
* `*` - indicates that repo was part of training set used to determine
the first set of weighting factors.
The fact that the heuristic performed nearly as well on the test set as
on the training set in column "indent-1" is a good indication that the
heuristic was not over-trained. Given that fact, I ran a second round of
optimization, using the entire corpus as the training set. The resulting
set of weights gave the results in column "indent-2". These are the
weights included in this patch.
The final result gives consistently and significantly better results
across the whole corpus than either `git diff` or `git diff
--compaction-heuristic`. It makes only about 1/30 as many errors as the
former and about 1/10 as many errors as the latter. (And a good fraction
of the remaining errors are for diffs that involve weirdly-formatted
code, sometimes apparently machine-generated.)
The tools that were used to do this optimization and analysis, along
with the human-generated data values, are recorded in a separate project
[1].
This patch adds a new command-line option `--indent-heuristic`, and a
new configuration setting `diff.indentHeuristic`, that activate this
heuristic. This interface is only meant for testing purposes, and should
be finalized before including this change in any release.
[1] https://github.com/mhagger/diff-slider-tools
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git diff --submodule={short,log}" mechanism has been enhanced
to allow "--submodule=diff" to show the patch between the submodule
commits bound to the superproject.
* jk/diff-submodule-diff-inline:
diff: teach diff to display submodule difference with an inline diff
submodule: refactor show_submodule_summary with helper function
submodule: convert show_submodule_summary to use struct object_id *
allow do_submodule_path to work even if submodule isn't checked out
diff: prepare for additional submodule formats
graph: add support for --line-prefix on all graph-aware output
diff.c: remove output_prefix_length field
cache: add empty_tree_oid object and helper function
When `len < 1`, len has to be 0 or negative, emit_line will then remove the
first character and by then `len` would be negative. As this doesn't
happen, it is safe to assume it is dead code.
This continues to simplify the code, which was started in b8d9c1a66b
(2009-09-03, diff.c: the builtin_diff() deals with only two-file
comparison).
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We keep the actual data in the diff options, which are just as accessible.
Remove the pointer stored in struct emit_callback for readability.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The value of `ecbdata->opt` is accessible via the short variable `o`
already, so let's use that instead.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert struct cache_entry to use struct object_id by applying the
following semantic patch and the object_id transforms from contrib, plus
the actual change to the struct:
@@
struct cache_entry E1;
@@
- E1.sha1
+ E1.oid.hash
@@
struct cache_entry *E1;
@@
- E1->sha1
+ E1->oid.hash
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git-diff and friends a new format for displaying the difference
of a submodule. The new format is an inline diff of the contents of the
submodule between the commit range of the update. This allows the user
to see the actual code change caused by a submodule update.
Add tests for the new format and option.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we're going to be changing this function in a future patch, lets
go ahead and convert this to use object_id now.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A future patch will add a new format for displaying the difference of
a submodule. Make it easier by changing how we store the current
selected format. Replace the DIFF_OPT flag with an enumeration, as each
format will be mutually exclusive.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an extension to git-diff and git-log (and any other graph-aware
displayable output) such that "--line-prefix=<string>" will print the
additional line-prefix on every line of output.
To make this work, we have to fix a few bugs in the graph API that force
graph_show_commit_msg to be used only when you have a valid graph.
Additionally, we extend the default_diff_output_prefix handler to work
even when no graph is enabled.
This is somewhat of a hack on top of the graph API, but I think it
should be acceptable here.
This will be used by a future extension of submodule display which
displays the submodule diff as the actual diff between the pre and post
commit in the submodule project.
Add some tests for both git-log and git-diff to ensure that the prefix
is honored correctly.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"diff/log --stat" has a logic that determines the display columns
available for the diffstat part of the output and apportions it for
pathnames and diffstat graph automatically.
5e71a84a (Add output_prefix_length to diff_options, 2012-04-16)
added the output_prefix_length field to diff_options structure to
allow this logic to subtract the display columns used for the
history graph part from the total "terminal width"; this matters
when the "git log --graph -p" option is in use.
The field must be set to the number of display columns needed to
show the output from the output_prefix() callback, which is error
prone. As there is only one user of the field, and the user has the
actual value of the prefix string, let's get rid of the field and
have the user count the display width itself.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git rebase" tries to compare set of changes on the updated
upstream and our own branch, it computes patch-id for all of these
changes and attempts to find matches. This has been optimized by
lazily computing the full patch-id (which is expensive) to be
compared only for changes that touch the same set of paths.
* kw/patch-ids-optim:
rebase: avoid computing unnecessary patch IDs
patch-ids: add flag to create the diff patch id using header only data
patch-ids: replace the seen indicator with a commit pointer
patch-ids: stop using a hand-rolled hashmap implementation
There is an optimization used in "git diff $treeA $treeB" to borrow
an already checked-out copy in the working tree when it is known to
be the same as the blob being compared, expecting that open/mmap of
such a file is faster than reading it from the object store, which
involves inflating and applying delta. This however kicked in even
when the checked-out copy needs to go through the convert-to-git
conversion (including the clean filter), which defeats the whole
point of the optimization. The optimization has been disabled when
the conversion is necessary.
* jk/diff-do-not-reuse-wtf-needs-cleaning:
diff: do not reuse worktree files that need "clean" conversion
This will allow a diff patch id to be created using only the header data
so that the contents of the file will not have to be loaded.
Signed-off-by: Kevin Willford <kcwillford@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When accessing a blob for a diff, we may try to reuse file
contents in the working tree, under the theory that it is
faster to mmap those file contents than it would be to
extract the content from the object database.
When we have to filter those contents, though, that
assumption does not hold. Even for our internal conversions
like CRLF, we have to allocate and fill a new buffer anyway.
But much worse, for external clean filters we have to exec
an arbitrary script, and we have no idea how expensive it
may be to run.
So let's skip this optimization when conversion into git's
"clean" form is required. This applies whenever the
"want_file" flag is false. When it's true, the caller
actually wants the smudged worktree contents, which the
reused file by definition already has (in fact, this is a
key optimization going the other direction, since reusing
the worktree file there lets us skip smudge filters).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of the callers of this function use struct object_id, so convert it
to use struct object_id in its arguments and internally.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that this struct's sha1 member is called "oid", update the comment
and the sha1_valid member to be called "oid_valid" instead. The
following Coccinelle semantic patch was used to implement this, followed
by the transformations in object_id.cocci:
@@
struct diff_filespec o;
@@
- o.sha1_valid
+ o.oid_valid
@@
struct diff_filespec *p;
@@
- p->sha1_valid
+ p->oid_valid
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert struct diff_filespec's sha1 member to use a struct object_id
called "oid" instead. The following Coccinelle semantic patch was used
to implement this, followed by the transformations in object_id.cocci:
@@
struct diff_filespec o;
@@
- o.sha1
+ o.oid.hash
@@
struct diff_filespec *p;
@@
- p->sha1
+ p->oid.hash
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
