This reverts commit c0ecb07048 "git-pull.sh:
Fix call to git-merge for new command format" and
commit b81e00a965 "git-merge: a deprecation
notice of the ancient command line syntax".
They caused a "git pull" (without any arguments, and without any local
commits---only to update to the other side) to warn that commit log
message is ignored because the merge resulted in a fast-forward.
Another possible solution is to add an extra option to "git merge" so that
"git pull" can tell it that the message given is not coming from the end
user (the canned message is passed just in case the merge resulted in a
non-ff and caused commit), but I think it is easier _not_ to deprecate the
old syntax.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 24ab81a fixed the deletion of empty files, but broke
deletion of non-empty files. The approach it took was to
factor out the "deleted" line from the patch header into its
own hunk, the same way we do for mode changes. However,
unlike mode changes, we only showed the special "delete this
file" hunk if there were no other hunks. Otherwise, the user
would annoyingly be presented with _two_ hunks: one for
deleting the file and one for deleting the content.
This meant that in the non-empty case, we forgot about the
deleted line entirely, and we submitted a bogus patch to
git-apply (with "/dev/null" as the destination file, but not
marked as a deletion).
Instead, this patch combines the file deletion hunk and the
content deletion hunk (if there is one) into a single
deletion hunk which is either staged or not.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This also adds a test case for:
"git svn: Don't create empty directories whose parents were deleted"
which was the reason we found this bug in the first place.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Commit 6111b93 "git svn: attempt to create empty dirs on clone+rebase"
will create empty directories 'a/b' and 'a/c' if they were previously
created in SVN, even if their parent directory 'a' was deleted.
For example, unhandled.log may contain lines like this:
r32
+empty_dir: packages/sipb-xen-remctl-auto/sipb-xen-remctl-auto/files/etc/remctl/sipb-xen-auto/acl
+empty_dir: packages/sipb-xen-remctl-auto/sipb-xen-remctl-auto/files/etc/remctl/sipb-xen-auto/machine.d
+empty_dir: packages/sipb-xen-remctl-auto/sipb-xen-remctl-auto/files/etc/remctl/sipb-xen-auto/moira-acl
[...]
r314
-empty_dir: packages/sipb-xen-remctl-auto
[ew: rewrote to be line-wrapped at <= 80-columns]
Reported-by: Evan Broder <broder@mit.edu>
Signed-off-by: Greg Price <price@ksplice.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
When merging branches based on svk:merge properties, a single merge
can have updated or added multiple svk:merge lines. Attempt to
include the minimal set of parents by sorting the merge properties in
order of revision, highest to lowest.
Signed-off-by: Alex Vandiver <alex@chmrr.net>
Acked-by: Sam Vilain <sam@vilain.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Due to a bug in Tk, git-gui almost always (unless git-gui is closed
right after starting) produces an X window error message on exit,
something like:
X Error of failed request: RenderBadPicture (invalid Picture parameter)
Major opcode of failed request: 150 (RENDER)
Minor opcode of failed request: 7 (RenderFreePicture)
Picture id in failed request: 0x3a000dc
Serial number of failed request: 1965
Current serial number in output stream: 1980
Respective Tk bug report is here:
http://sourceforge.net/tracker/?func=detail&atid=112997&aid=1821174&group_id=12997
This bug is triggered only when the send command is blocked via
rename send {} . The following patch re-enables send just before
quiting git-gui to suppress the error.
Signed-off-by: Jindrich Makovicka <makovick@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Without this, test-lib checks that the git_remote_helpers
directory has been built. However, if we are building
without python, we will not have done anything at all in
that directory, and test-lib's sanity check will fail.
We bump the inclusion of GIT-BUILD-OPTIONS further up in
test-lib; it contains configuration, and as such should be
read before we do any checks (and in this particular case,
we need its value to do our check properly).
Signed-off-by: Jeff King <peff@peff.net>
Looks-fine-to-me-by: Brandon Casey <brandon.casey.ctr@nrlssc.navy.mil>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I just wanted to add the recently learnt '--reset-author' option, but
then noticed that there are many more options missing. This patch
adds support for all of 'git commit's options, except '--allow-empty',
because it is primarily there for foreign scm interfaces.
Furthermore, this patch also adds support for completing the arguments
of those options that take a non-filename argument: valid modes are
offered for '--cleanup' and '--untracked-files', while refs for
'--reuse-message' and '--reedit-message', because these two take a
commit as argument.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On MacOS raising a window causes the focus to be transferred
to it -- although it may actually be a bug in the Tcl/Tk port.
When this happens with the blame viewer tooltips, it makes
the interface less usable, because Entry and Leave handlers
on the text view cause the tip to disappear once the mouse
is moved even 1 pixel.
This commit makes the code raise the main window on MacOS
when Tk 8.5 is used. This version seems to properly support
wm transient by making the tip stay on top of the master,
so reraising the master does not cause it to disappear. Thus
the only remaining sign of problems is slight UI flicker
when focus is momentarily transferred to the tip and back.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
On Windows, git-gui suggests running the garbage collector if it finds
1 or more files in .git/objects/42 (as opposed to 8 files on other
platforms). The probability of that happening if the repo contains
about 100 loose objects is 32%. The probability for the same to happen
when searching 4 directories is only 8%, which is bit more reasonable.
Also remove $objects_limit from the message, because we already know
that we are above (or close to) that limit. Telling the user about
that number does not really give him any useful information.
The following octave script shows the probability for at least m*q
objects to be found in q subdirectories of .git/objects if n is the
total number of objects.
q = 4;
m = [1 2 8];
n = 0:10:2000;
P = zeros(length(n), length(m));
for k = 1:length(n)
P(k, :) = 1-binocdf(q*m-1, n(k), q/(256-q));
end
plot(n, P);
n \ q 1 4
50 18% 1%
100 32% 8%
200 54% 39%
500 86% 96%
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We already do the same when locally deleting a branch.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
What used to happen is that diffcore_count_changes() simply ignored any
hashes in the destination that didn't match hashes in the source. EXCEPT
if the source hash didn't exist at all, in which case it would count _one_
destination hash that happened to have the "next" hash value. As a
consequence, newly added material was often undercounted, making output
from --dirstat and "complete rewrite" detection used by -B unrelialble.
This changes it so that:
- whenever it bypasses a destination hash (because it doesn't match a
source), it counts the bytes associated with that as "literal added"
- at the end (once we have used up all the source hashes), we do the same
thing with the remaining destination hashes.
- when hashes do match, and we use the difference in counts as a value,
we also use up that destination hash entry (the 'd++').
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing code checked to make sure we were not in a bare
repository when doing a hard reset. However, we should take
this one step further, and make sure we are in a worktree.
Otherwise, we can end up munging files inside of '.git'.
Furthermore, we should do the same check for --merge resets,
which have the same properties. Actually, a merge reset of
HEAD^ would already complain, since further down in the code
we want a worktree. However, it is nicer to check up-front;
then we are sure we cover all cases ("git reset --merge"
would run, even though it wasn't doing anything) and we can
give a more specific message.
Add tests to t7103 to cover these cases and some missing ones.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --stringparam option is not available on older xmlto versions.
Instead, set man.base.url.for.relative.links via a .xsl file. Older
docbook versions will ignore this without causing grief to users of
older xmlto versions.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mention that path parameters are based on the current working directory.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
--
Documentation/git-archive.txt | 5 +++--
1 files changed, 3 insertions(+), 2 deletions(-)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rr-cache directory should always exist if we are doing
garbage collection (earlier code paths check this
explicitly), but we may not necessarily succeed in opening
it (for example, due to permissions problems). In that case,
we should print an error message rather than simply
segfaulting.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the failed push message to before transport_disconnect() so that
it doesn't access transport->url after transport has been free()'d (in
transport_disconnect()).
Additionally, make the failed push message more accurate by moving it
before transport_disconnect(), so that it doesn't report errors due
to a failed disconnect.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mm/maint-hint-failed-merge:
user-manual: Document that "git merge" doesn't like uncommited changes.
merge-recursive: point the user to commit when file would be overwritten.
* mm/config-pathname-tilde-expand:
Documentation: avoid xmlto input error
expand_user_path: expand ~ to $HOME, not to the actual homedir.
Expand ~ and ~user in core.excludesfile, commit.template
* jk/maint-break-rename-reduce-memory:
diffcore-rename: reduce memory footprint by freeing blob data early
diffcore-break: save cnt_data for other phases
diffcore-break: free filespec data as we go
Newer DocBook stylesheets want man.base.url.for.relative.links
parameter set when formatting manpages with external references
to turn them into full URLs, and leave a helpful "you should
set this parameter" message in the output. Earlier we added
the MAN_BASE_URL make variable to specify the value for it.
When MAN_BASE_URL is not given, it ought to be safe to set the
parameter to empty; it would result in an empty leading path for
older stylesheets that ignore the parameter, and newer ones
would produce the same "relative URL" without the message.
Unfortunately, older xmlto (at least version 0.0.18 released in
early 2004 that comes with RHEL/CentOS 5) does not understand
the --stringparam command line option, so we cannot add the
parameter definition unconditionally to the command line. Work
it around by passing the parameter only when set.
If you do not have a suitable URL prefix, you can pass a quoted empty
string to it, like so:
$ make MAN_BASE_URL='""'
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When loading a notes tree, the code primarily looks for SHA1-like paths
whose total length (discounting directory separators) are 40 chars
(interpreted as valid note entries) or less (interpreted as subtree
entries that may in turn contain note entries when unpacked).
However, there is an additional condition that must hold for valid
subtree entries: They must be _tree_ objects (duh).
This patch adds an appropriate test for this condition, thereby fixing
the crash that occured when passing a non-tree object to the tree-walk
API.
The patch also adds another selftest verifying correct behaviour of
non-notes in note trees.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '--no-chain-reply-to' option is a Getopt::Long boolean option. The
'--no-' prefix (as in --no-chain-reply-to) for boolean options is not
supported in Getopt::Long version 2.32 which was released with Perl 5.8.0.
This version only supports '--no' as in '--nochain-reply-to'. More recent
versions of Getopt::Long, such as version 2.34, support either prefix. So
use the older form in the tests.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some ancient platforms do not have an extensive list of alternate names for
character encodings. For example, Solaris 7 and IRIX 6.5 do not know that
ISO-8859-1 is the same as ISO8859-1. Modern platforms do know this, so use
the older name.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pull --rebase fails because it cannot find what branch to
merge against, the error message implies we are trying to merge.
Say "rebase against" instead of "merge with" to avoid confusion.
The configuration suggested to remedy the situation uses a
confusing syntax, with variables specified in the dotted form
accepted by 'git config' but separated from their values by the
'=' delimiter used by config files. Since the user will have to
edit this output anyway, it is more helpful to provide a config
file snippet to paste into an editor and modify.
Signed-off-by: Jan Krüger <jk@jk.gs>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even setting it to empty is better than leaving it unset as it
prevents the warning cruft from appearing in the output.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
