The use of heredoc inside quoted strings doesn't seem to be
supported by dash. pdksh seems to handle it fine, however.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
echo isn't remotely standardized for handling backslashes,
so cat + heredoc seems better
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since the "a..b c..d" syntax is interpreted as "b ^a d ^c" as other
range-ish commands, if you want to format a..b and then c..d and end
up with files consecutively numbered, the second run needs to be able
to tell the command what number to start from.
This does not imply --numbered (which gives [PATCH n/m] to the subject).
Signed-off-by: Junio C Hamano <junkio@cox.net>
Otherwise, if make is suspended, or killed with prejudice, or if the
system crashes, you could be left with an up-to-date, yet corrupt,
generated file.
I left off the `clean' addition, because I believe "make clean" should
not remove wildcard patterns like "*+", on the off-chance that someone
uses names like that for files they care about. Besides, in practice,
those temporary files are left behind so rarely that they're not a bother,
and they're removed again as part of the next build.
[jc: sign-off?]
Signed-off-by: Junio C Hamano <junkio@cox.net>
I was just testing that "git ls-remote" change by Junio, and when you're
not in a git repository, it gives this totally bogus warning. The _target_
obviously has to be a git repository, but there's no reason why you'd have
to be in a local git repo when doing an ls-remote.
The reason is commit 73136b2e8a by Dscho: it
adds calls to git-repo-config in git-parse-remote.sh to get the remote
shorthands etc.
Now, either we should just hide and ignore the error from git-repo-config
(probably bad, because some errors _are_ valid - like git-repo-config
failing due to bad syntax in the config file), or we should just make
git-repo-config quietly handle the case of not being in a git repository.
This does the latter: just quietly accepting (and doing nothing - trying
to set a value will result in the lock-file failing) our lot in life
sounds better than dying with a bogus error message.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Acked-By: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
As both DESTDIR and the prefix are supposed to be absolute pathnames
they can simply be concatenated without an extra / (like in the main Makefile).
The extra slash may even break installation on Windows.
[jc: adjusted an earlier workaround for this problem in the dist-doc
target in the main Makefile as well. ]
Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This removes the "Files" and "Pickaxe" parts of the "Find" function,
so Find is now just about searching the commit data. We now highlight
the commits that match the Find string (without having to press Find),
and have a drop-down menu for selecting whether the git-diff-tree based
highlighting is done on paths or on adding/removing a given string.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This makes it work a bit more smoothly, and adds a reverse-search
function, for which I stole the ^R binding from the find function.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Avoid "use POSIX qw(strftime dup2 :errno_h)"; it was reported
that a Perl installations on Mandrake 9.1 did not like it, even
though it understood "use POSIX qw(:errno_h)". Funny.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/fetchupload:
fetch-pack: give up after getting too many "ack continue"
cat-file: document -p option
Built git-upload-tar should be ignored.
ls-remote: fix rsync:// to report HEAD
If your repository have more roots than the remote repository
you ask an object for, the remote upload-pack keeps responding
"ack continue" until it fills up its received-have buffer
(currently 256 entries). Usually this is not a problem because
the requester stops traversing the ancestry chain from the commit
it gets "ack continue" for, but this mechanism does not work as
a roadblock when it traverses down the path to the root the
other side does not have.
Signed-off-by: Junio C Hamano <junkio@cox.net>
If the user supplies -l to git-branch when creating a new branch
then the new branch's log should be created automatically and the
branch creation should be logged in that log.
Further if a branch is being deleted and it had a log then also
verify that the log was deleted.
Test git-checkout -b foo -l for creating a new branch foo with a
log and checking out that branch.
Fixed git-checkout -b foo -l as the branch variable name was
incorrect in the script.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The reflog message from git-commit should include the first line
of the commit message as supplied by the user.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* master: (90 commits)
fetch.c: remove an unused variable and dead code.
Clean up sha1 file writing
Builtin git-cat-file
builtin format-patch: squelch content-type for 7-bit ASCII
CMIT_FMT_EMAIL: Q-encode Subject: and display-name part of From: fields.
add more informative error messages to git-mktag
remove the artificial restriction tagsize < 8kb
git-rebase: use canonical A..B syntax to format-patch
git-format-patch: now built-in.
fmt-patch: Support --attach
fmt-patch: understand old <his> notation
Teach fmt-patch about --keep-subject
Teach fmt-patch about --numbered
fmt-patch: implement -o <dir>
fmt-patch: output file names to stdout
Teach fmt-patch to write individual files.
built-in tar-tree and remote tar-tree
Builtin git-diff-files, git-diff-index, git-diff-stages, and git-diff-tree.
Builtin git-show-branch.
Builtin git-apply.
...
Funnily enough, this variable was never assigned ever since it
was introduced, and has been protecting some code that has never
been executed.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* lt/apply:
Clean up sha1 file writing
Builtin git-cat-file
apply: force matching at the beginning.
Add a test-case for git-apply trying to add an ending line
apply: treat EOF as proper context.
* master: (40 commits)
Clean up sha1 file writing
Builtin git-cat-file
builtin format-patch: squelch content-type for 7-bit ASCII
CMIT_FMT_EMAIL: Q-encode Subject: and display-name part of From: fields.
add more informative error messages to git-mktag
remove the artificial restriction tagsize < 8kb
git-rebase: use canonical A..B syntax to format-patch
git-format-patch: now built-in.
fmt-patch: Support --attach
fmt-patch: understand old <his> notation
Teach fmt-patch about --keep-subject
Teach fmt-patch about --numbered
fmt-patch: implement -o <dir>
fmt-patch: output file names to stdout
Teach fmt-patch to write individual files.
Use RFC2822 dates from "git fmt-patch".
git-fmt-patch: thinkofix to show [PATCH] properly.
rename internal format-patch wip
Minor tweak on subject line in --pretty=email
Tentative built-in format-patch.
...
This cleans up and future-proofs the sha1 file writing in sha1_file.c.
In particular, instead of doing a simple "write()" call and just verifying
that it succeeds (or - as in one place - just assuming it does), it uses
"write_buffer()" to write data to the file descriptor while correctly
checking for partial writes, EINTR etc.
It also splits up write_sha1_to_fd() to be a lot more readable: if we need
to re-create the compressed object, we do so in a separate helper
function, making the logic a whole lot more modular and obvious.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When there is no leading context, the patch must match at the
beginning of preimage; otherwise there is a "patch adds these
lines while the other lines were added to the original file"
conflict.
This is the opposite of match_end fix earlier in this series.
Unlike matching at the end case, we can additionally check the
preimage line number recorded in the patch, so the change is not
symmetrical with the earlier one.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes "git format-patch" a built-in.
* js/fmt-patch:
git-rebase: use canonical A..B syntax to format-patch
git-format-patch: now built-in.
fmt-patch: Support --attach
fmt-patch: understand old <his> notation
Teach fmt-patch about --keep-subject
Teach fmt-patch about --numbered
fmt-patch: implement -o <dir>
fmt-patch: output file names to stdout
Teach fmt-patch to write individual files.
Use RFC2822 dates from "git fmt-patch".
git-fmt-patch: thinkofix to show [PATCH] properly.
rename internal format-patch wip
Minor tweak on subject line in --pretty=email
Tentative built-in format-patch.
This makes 'git add' and 'git rm' built-ins.
* lt/dirwalk:
Add builtin "git rm" command
Move pathspec matching from builtin-add.c into dir.c
Prevent bogus paths from being added to the index.
builtin-add: fix unmatched pathspec warnings.
Remove old "git-add.sh" remnants
builtin-add: warn on unmatched pathspecs
Do "git add" as a builtin
Clean up git-ls-file directory walking library interface
libify git-ls-files directory traversal
* master:
--summary output should print immediately after stats.
git-svn: ignore expansion of svn:keywords
git-svn: starting a 1.1.0-pre development version
cvsimport: set up commit environment in perl instead of using env
git-apply adding an ending line doesn't seem to fail if the ending line is
already present in the patched file.
Signed-off-by: Catalin Marinas <catalin.marinas@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Currently the summary is displayed after the patch. Fix this so
that the output order is stat-summary-patch. As a consequence of
the way this is coded, the --summary option will only actually
display summary data if combined with either the --stat or
--patch-with-stat option.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Catalin noticed that we do not treat end-of-file condition shown
in the patch text as the patch context. This causes a patch
that appends at the end of the file to cleanly apply even if
something else has been appended to the file. If this happened
in the middle, we would refuse by saying that the file has
conflicting modifications.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Unlike my earlier test patch, this also checks svn:eol-style and
makes sure it's applied to working copy updates. This is
definitely more correct than my original attempt at killing
keyword expansions, but I still haven't tested it enough to
know. Feedback would be much appreciated.
Also changed assert_svn_wc_clean() to only work on the svn
working copy. This requires a separate call to assert_tree() to
check wc integrity against git in preparation for another change
I'm planning.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This does incremental highlighting of matches to the search string
but doesn't do true incremental search a la emacs.
Signed-off-by: Paul Mackerras <paulus@samba.org>
When the server says "created this file whose length is empty",
we mistakenly said "oops, the server did not say a sensible
thing". Fix it.
Spotted and fixed by Linus, acked by Martin.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* sp/reflog:
Enable ref log creation in git checkout -b.
Create/delete branch ref logs.
Include ref log detail in commit, reset, etc.
Change order of -m option to update-ref.
Correct force_write bug in refs.c
Change 'master@noon' syntax to 'master@{noon}'.
Log ref updates made by fetch.
Force writing ref if it doesn't exist.
Added logs/ directory to repository layout.
General ref log reading improvements.
Fix ref log parsing so it works properly.
Support 'master@2 hours ago' syntax
Log ref updates to logs/refs/<ref>
Convert update-ref to use ref_lock API.
Improve abstraction of ref lock/write.
* eb/mailinfo:
Allow in body headers beyond the in body header prefix.
More accurately detect header lines in read_one_header_line
In handle_body only read a line if we don't already have one.
Refactor commit messge handling.
Move B and Q decoding into check header.
Make read_one_header_line return a flag not a length.
- handle_from is fixed to not mangle it's input line.
- Then handle_inbody_header is allowed to look in
the body of a commit message for additional headers
that we haven't already seen.
This allows patches with all of the right information in
unfortunate places to be imported.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Only count lines of the form '^.*: ' and '^From ' as email
header lines.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This prepares for detecting non-email patches that don't have
mail headers. In which case we have already read the first
line so handle_body should not ignore it.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
- Move handle_info into main so it is called once
after everything has been parsed. This allows the removal
of a static variable and removes two duplicate calls.
- Move parsing of inbody headers into handle_commit.
This means we parse the in-body headers after we have decoded
the character set, and it removes code duplication between
handle_multipart_one_part and handle_body.
- Change the flag indicating that we have seen an in body
prefix header into another bit in seen.
This is a little more general and allows the possibility of parsing
in body headers after the body message has begun.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
