Use "Erase in Line" CSI sequence that is already used in the editor
support to clear cruft in the progress output.
* sg/rebase-progress:
progress: use term_clear_line()
rebase: fix garbled progress display with '-x'
pager: add a helper function to clear the last line in the terminal
t3404: make the 'rebase.missingCommitsCheck=ignore' test more focused
t3404: modernize here doc style
Two new commands "git switch" and "git restore" are introduced to
split "checking out a branch to work on advancing its history" and
"checking out paths out of the index and/or a tree-ish to work on
advancing the current history" out of the single "git checkout"
command.
* nd/switch-and-restore: (46 commits)
completion: disable dwim on "git switch -d"
switch: allow to switch in the middle of bisect
t2027: use test_must_be_empty
Declare both git-switch and git-restore experimental
help: move git-diff and git-reset to different groups
doc: promote "git restore"
user-manual.txt: prefer 'merge --abort' over 'reset --hard'
completion: support restore
t: add tests for restore
restore: support --patch
restore: replace --force with --ignore-unmerged
restore: default to --source=HEAD when only --staged is specified
restore: reject invalid combinations with --staged
restore: add --worktree and --staged
checkout: factor out worktree checkout code
restore: disable overlay mode by default
restore: make pathspec mandatory
restore: take tree-ish from --source option instead
checkout: split part of it to new command 'restore'
doc: promote "git switch"
...
"git rebase --abort" used to leave refs/rewritten/ when concluding
"git rebase -r", which has been corrected.
* pw/rebase-abort-clean-rewritten:
rebase --abort/--quit: cleanup refs/rewritten
sequencer: return errors from sequencer_remove_state()
rebase: warn if state directory cannot be removed
rebase: fix a memory leak
When running a command with the 'exec' instruction during an
interactive rebase session, or for a range of commits using 'git
rebase -x', the output can be a bit garbled when the name of the
command is short enough:
$ git rebase -x true HEAD~5
Executing: true
Executing: true
Executing: true
Executing: true
Executing: true)
Successfully rebased and updated refs/heads/master.
Note the ')' at the end of the last line. It gets more garbled as the
range of commits increases:
$ git rebase -x true HEAD~50
Executing: true)
[ repeated 3 more times ]
Executing: true0)
[ repeated 44 more times ]
Executing: true00)
Successfully rebased and updated refs/heads/master.
Those extra numbers and ')' are remnants of the previously displayed
"Rebasing (N/M)" progress lines that are usually completely
overwritten by the "Executing: <cmd>" lines, unless 'cmd' is short and
the "N/M" part is long.
Make sure that the previously displayed "Rebasing (N/M)" line is
cleared by using the term_clear_line() helper function added in the
previous patch. Do so only when not being '--verbose', because in
that case these "Rebasing (N/M)" lines are not printed as progress
(i.e. as lines with '\r' at the end), but as "regular" output (with
'\n' at the end).
A couple of other rebase commands print similar messages, e.g.
"Stopped at <abbrev-oid>... <subject>" for the 'edit' or 'break'
commands, or the "Successfully rebased and updated <full-ref>." at the
very end. These are so long that they practically always overwrite
that "Rebasing (N/M)" progress line, but let's be prudent, and clear
the last line before printing these, too.
In 't3420-rebase-autostash.sh' two helper functions prepare the
expected output of four tests that check the full output of 'git
rebase' and thus are affected by this change, so adjust their
expectations to account for the new line clearing.
Note that this patch doesn't completely eliminate the possibility of
similar garbled outputs, e.g. some error messages from rebase or the
"Auto-merging <file>" message from within the depths of the merge
machinery might not be long enough to completely cover the last
"Rebasing (N/M)" line. This patch doesn't do anything about them,
because dealing with them individually would result in way too much
churn, while having a catch-all term_clear_line() call in the common
code path of pick_commits() would hide the "Rebasing (N/M)" line way
too soon, and it would either flicker or be invisible.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A "merge -c" instruction during "git rebase --rebase-merges" should
give the user a chance to edit the log message, even when there is
otherwise no need to create a new merge and replace the existing
one (i.e. fast-forward instead), but did not. Which has been
corrected.
* pw/rebase-edit-message-for-replayed-merge:
rebase -r: always reword merge -c
If a merge can be fast-forwarded then make sure that we still edit the
commit message if the user specifies -c. The implementation follows the
same pattern that is used for ordinary rewords that are fast-forwarded.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If there is an error when removing the state directory then we should
report it. This matches what the non-interactive rebase does.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update a code comment that referred to those files as if they were still
there.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git chery-pick" (and "revert" that shares the same runtime engine)
that deals with multiple commits got confused when the final step
gets stopped with a conflict and the user concluded the sequence
with "git commit". Attempt to fix it by cleaning up the state
files used by these commands in such a situation.
* pw/clean-sequencer-state-upon-final-commit:
fix cherry-pick/revert status after commit
commit/reset: try to clean up sequencer state
The internal implementation of "git rebase -i" has been updated to
avoid forking a separate "rebase--interactive" process.
* pw/rebase-i-internal:
rebase -i: run without forking rebase--interactive
rebase: use a common action enum
rebase -i: use struct rebase_options in do_interactive_rebase()
rebase -i: use struct rebase_options to parse args
rebase -i: use struct object_id for squash_onto
rebase -i: use struct commit when parsing options
rebase -i: remove duplication
rebase -i: combine rebase--interactive.c with rebase.c
rebase: use OPT_RERERE_AUTOUPDATE()
rebase: rename write_basic_state()
rebase: don't translate trace strings
sequencer: always discard index after checkout
The list of conflicted paths shown in the editor while concluding a
conflicted merge was shown above the scissors line when the
clean-up mode is set to "scissors", even though it was commented
out just like the list of updated paths and other information to
help the user explain the merge better.
* dl/merge-cleanup-scissors-fix:
cherry-pick/revert: add scissors line on merge conflict
sequencer.c: save and restore cleanup mode
merge: add scissors line on merge conflict
merge: cleanup messages like commit
parse-options.h: extract common --cleanup option
commit: extract cleanup_mode functions to sequencer
t7502: clean up style
t7604: clean up style
t3507: clean up style
t7600: clean up style
"git cherry-pick" run with the "-x" or the "--signoff" option used
to (and more importantly, ought to) clean up the commit log message
with the --cleanup=space option by default, but this has been
broken since late 2017. This has been fixed.
* pw/sequencer-cleanup-with-signoff-x-fix:
sequencer: fix cleanup with --signoff and -x
"git cherry-pick --options A..B", after giving control back to the
user to ask help resolving a conflicted step, did not honor the
options it originally received, which has been corrected.
* pw/cherry-pick-continue:
cherry-pick --continue: remember options
cherry-pick: demonstrate option amnesia
sequencer: break some long lines
The scripted version of "git rebase -i" wrote and rewrote the todo
list many times during a single step of its operation, and the
recent C-rewrite made a faithful conversion of the logic to C. The
implementation has been updated to carry necessary information
around in-core to avoid rewriting the same file over and over
unnecessarily.
* ag/sequencer-reduce-rewriting-todo:
rebase--interactive: move transform_todo_file()
sequencer: use edit_todo_list() in complete_action()
rebase-interactive: rewrite edit_todo_list() to handle the initial edit
rebase-interactive: append_todo_help() changes
rebase-interactive: use todo_list_write_to_file() in edit_todo_list()
sequencer: refactor skip_unnecessary_picks() to work on a todo_list
rebase--interactive: move rearrange_squash_in_todo_file()
rebase--interactive: move sequencer_add_exec_commands()
sequencer: change complete_action() to use the refactored functions
sequencer: make sequencer_make_script() write its script to a strbuf
sequencer: refactor rearrange_squash() to work on a todo_list
sequencer: refactor sequencer_add_exec_commands() to work on a todo_list
sequencer: refactor check_todo_list() to work on a todo_list
sequencer: introduce todo_list_write_to_file()
sequencer: refactor transform_todos() to work on a todo_list
sequencer: remove the 'arg' field from todo_item
sequencer: make the todo_list structure public
sequencer: changes in parse_insn_buffer()
This is in preparation for using `struct rebase_options` when parsing
options in cmd_rebase__interactive(). Using a string for onto,
restrict_revision and upstream, was a hangover from the scripted version
of rebase. The functions that use these variables are updated to take a
`struct commit`.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the checkout runs in a separate process our index will be out of date
so it should be discarded. The existing callers are not doing this
consistently so do it here to avoid the callers having to worry about
it.
This fixes some test failures that happen if do_interactive_rebase() is
called without forking rebase--interactive which we will implement
shortly. Running
git rebase -i master topic
starting on master created empty todo lists because all the commits in
topic were marked as cherry-picks. After topic was checked out in
prepare_branch_to_be_rebased() the working tree contained the contents
from topic but the index contained master and the cache entries were
still valid. This meant that diff_populate_filespec() which loads the
blobs when calculating patch-id's ended up reading the contents for
master from the working tree which actually contained topic.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ag/sequencer-reduce-rewriting-todo:
rebase--interactive: move transform_todo_file()
sequencer: use edit_todo_list() in complete_action()
rebase-interactive: rewrite edit_todo_list() to handle the initial edit
rebase-interactive: append_todo_help() changes
rebase-interactive: use todo_list_write_to_file() in edit_todo_list()
sequencer: refactor skip_unnecessary_picks() to work on a todo_list
rebase--interactive: move rearrange_squash_in_todo_file()
rebase--interactive: move sequencer_add_exec_commands()
sequencer: change complete_action() to use the refactored functions
sequencer: make sequencer_make_script() write its script to a strbuf
sequencer: refactor rearrange_squash() to work on a todo_list
sequencer: refactor sequencer_add_exec_commands() to work on a todo_list
sequencer: refactor check_todo_list() to work on a todo_list
sequencer: introduce todo_list_write_to_file()
sequencer: refactor transform_todos() to work on a todo_list
sequencer: remove the 'arg' field from todo_item
sequencer: make the todo_list structure public
sequencer: changes in parse_insn_buffer()
Fix a bug where the scissors line is placed after the Conflicts:
section, in the case where a merge conflict occurs and
commit.cleanup = scissors.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user specifies an explicit cleanup mode then save and restore it
so that it is preserved by 'git cherry-pick --continue'.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before commit 356ee4659b ("sequencer: try to commit without forking 'git
commit'", 2017-11-24) when --signoff or -x were given on the command
line the commit message was cleaned up with --cleanup=space or
commit.cleanup if it was set. Unfortunately this behavior was lost when
I implemented committing without forking. Fix this and add some tests to
catch future regressions.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user commits a conflict resolution using `git commit` in the
middle of a sequence of cherry-picks/reverts then `git status` missed
the fact that a cherry-pick/revert is still in progress.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cherry-picking or reverting a sequence of commits and if the final
pick/revert has conflicts and the user uses `git commit` to commit the
conflict resolution and does not run `git cherry-pick --continue` then
the sequencer state is left behind. This can cause problems later. In my
case I cherry-picked a sequence of commits the last one of which I
committed with `git commit` after resolving some conflicts, then a while
later, on a different branch I aborted a revert which rewound my HEAD to
the end of the cherry-pick sequence on the previous branch. Avoid this
potential problem by removing the sequencer state if we're committing or
resetting the final pick in a sequence.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remember --allow-empty, --allow-empty-message and
--keep-redundant-commits when cherry-pick stops for a conflict
resolution.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
reformat save_opts() to remove excessively long lines.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The interactive rebase simply complains about an "invalid line" when the
object hash of, say, a `pick` line could not be parsed.
Let's tell the user what happened in a little more detail.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A more structured way to obtain execution trace has been added.
* jh/trace2:
trace2: add for_each macros to clang-format
trace2: t/helper/test-trace2, t0210.sh, t0211.sh, t0212.sh
trace2:data: add subverb for rebase
trace2:data: add subverb to reset command
trace2:data: add subverb to checkout command
trace2:data: pack-objects: add trace2 regions
trace2:data: add trace2 instrumentation to index read/write
trace2:data: add trace2 hook classification
trace2:data: add trace2 transport child classification
trace2:data: add trace2 sub-process classification
trace2:data: add editor/pager child classification
trace2:data: add trace2 regions to wt-status
trace2: collect Windows-specific process information
trace2: create new combined trace facility
trace2: Documentation/technical/api-trace2.txt
Four new configuration variables {author,committer}.{name,email}
have been introduced to override user.{name,email} in more specific
cases.
* wh/author-committer-ident-config:
config: allow giving separate author and committer idents
As transform_todo_file() is only needed inside of
rebase--interactive.c for `rebase -p', it is moved there from
sequencer.c.
The parameter r (repository) is dropped along the way.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes complete_action() to use edit_todo_list(), now that it can
handle the initial edit of the todo list.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
edit_todo_list() is changed to work on a todo_list, and to handle the
initial edition of the todo list (ie. making a backup of the todo
list).
It does not check for dropped commits yet, as todo_list_check() does not
take the commits that have already been processed by the rebase (ie. the
todo list is edited in the middle of a rebase session).
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This moves the writing of the comment "Rebase $shortrevisions onto
$shortonto ($command_count commands)" from todo_list_write_to_file() to
append_todo_help().
shortrevisions, shortonto, and command_count are passed as parameters to
append_todo_help().
During the initial edit of the todo list, shortrevisions and shortonto
are not NULL. Therefore, if shortrevisions or shortonto is NULL, then
edit_todo would be true, otherwise it would be false. Thus, edit_todo
is removed from the parameters of append_todo_help().
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like complete_action(), edit_todo_list() used a
function (transform_todo_file()) that read the todo list from the disk
and wrote it back, resulting in useless disk accesses.
This changes edit_todo_list() to call directly todo_list_write_to_file()
instead.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This refactors skip_unnecessary_picks() to work on a todo_list. As this
function is only called by complete_action() (and thus is not used by
rebase -p), the file-handling logic is completely dropped here.
Instead of truncating the todo list’s buffer, the items are moved to
the beginning of the list, eliminating the need to reparse the list.
This also means its buffer cannot be directly written to the disk.
rewrite_file() is then removed, as it is now unused.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As rearrange_squash_in_todo_file() is only needed inside of
rebase--interactive.c for `rebase -p', it is moved there from
sequencer.c.
The parameter r (repository) is dropped along the way, and the error
handling is slightly improved.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As sequencer_add_exec_commands() is only needed inside of
rebase--interactive.c for `rebase -p', it is moved there from
sequencer.c.
The parameter r (repository) is dropped along the way.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
complete_action() used functions that read the todo-list file, made some
changes to it, and wrote it back to the disk.
The previous commits were dedicated to separate the part that deals with
the file from the actual logic of these functions. Now that this is
done, we can call directly the "logic" functions to avoid useless file
access.
The parsing of the list has to be done by the caller. If the buffer of
the todo list provided by the caller is empty, a `noop' command is
directly added to the todo list, without touching the buffer.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes sequencer_make_script() write its script to a strbuf (ie. the
buffer of a todo_list) instead of a FILE. This reduce the amount of
read/write made by rebase interactive.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This refactors rearrange_squash() to work on a todo_list to avoid
redundant reads and writes. The function is renamed
todo_list_rearrange_squash().
The old version created a new buffer, which was directly written to the
disk. This new version creates a new item list by just copying items
from the old item list, without creating a new buffer. This eliminates
the need to reparse the todo list, but this also means its buffer cannot
be directly written to the disk.
As rebase -p still need to check the todo list from the disk, a new
function is introduced, rearrange_squash_in_todo_file().
complete_action() still uses rearrange_squash_in_todo_file() for now.
This will be changed in a future commit.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This refactors sequencer_add_exec_commands() to work on a todo_list to
avoid redundant reads and writes to the disk.
Instead of inserting the `exec' commands between the other commands and
re-parsing the buffer at the end, they are appended to the buffer once,
and a new list of items is created. Items from the old list are copied
across and new `exec' items are appended when necessary. This
eliminates the need to reparse the buffer, but this also means we have
to use todo_list_write_to_disk() to write the file.
todo_list_add_exec_commands() and sequencer_add_exec_commands() are
modified to take a string list instead of a string -- one item for each
command. This makes it easier to insert a new command to the todo list
for each command to execute.
sequencer_add_exec_commands() still reads the todo list from the disk,
as it is needed by rebase -p.
complete_action() still uses sequencer_add_exec_commands() for now.
This will be changed in a future commit.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit d0aaa46fd3 ("commit: move empty message checks to libgit",
2017-11-10) removes the last use of 'sign_off_header' outside of
the "sequencer.c" source file. Remove the extern declaration from
the header file and mark the definition of the symbol with the
static keyword.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The assumption to work on the single "in-core index" instance has
been reduced from the library-ish part of the codebase.
* nd/the-index-final:
cache.h: flip NO_THE_INDEX_COMPATIBILITY_MACROS switch
read-cache.c: remove the_* from index_has_changes()
merge-recursive.c: remove implicit dependency on the_repository
merge-recursive.c: remove implicit dependency on the_index
sha1-name.c: remove implicit dependency on the_index
read-cache.c: replace update_index_if_able with repo_&
read-cache.c: kill read_index()
checkout: avoid the_index when possible
repository.c: replace hold_locked_index() with repo_hold_locked_index()
notes-utils.c: remove the_repository references
grep: use grep_opt->repo instead of explict repo argument
"git rebase --merge" as been reimplemented by reusing the internal
machinery used for "git rebase -i".
* en/rebase-merge-on-sequencer:
rebase: implement --merge via the interactive machinery
rebase: define linearization ordering and enforce it
git-legacy-rebase: simplify unnecessary triply-nested if
git-rebase, sequencer: extend --quiet option for the interactive machinery
am, rebase--merge: do not overlook --skip'ed commits with post-rewrite
t5407: add a test demonstrating how interactive handles --skip differently
rebase: fix incompatible options error message
rebase: make builtin and legacy script error messages the same
The author.email, author.name, committer.email and committer.name
settings are analogous to the GIT_AUTHOR_* and GIT_COMMITTER_*
environment variables, but for the git config system. This allows them
to be set separately for each repository.
Git supports setting different authorship and committer
information with environment variables. However, environment variables
are set in the shell, so if different authorship and committer
information is needed for different repositories an external tool is
required.
This adds support to git config for author.email, author.name,
committer.email and committer.name settings so this information
can be set per repository.
Also, it generalizes the fmt_ident function so it can handle author vs
committer identification.
Signed-off-by: William Hubbs <williamh@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase -i" learned to re-execute a command given with 'exec'
to run after it failed the last time.
* js/rebase-i-redo-exec:
rebase: introduce a shortcut for --reschedule-failed-exec
rebase: add a config option to default to --reschedule-failed-exec
rebase: introduce --reschedule-failed-exec
This refactors check_todo_list() to work on a todo_list to avoid
redundant reads and writes to the disk. The function is renamed
todo_list_check(). The parsing of the two todo lists is left to the
caller.
As rebase -p still need to check the todo list from the disk, a new
function is introduced, check_todo_list_from_file(). It reads the file
from the disk, parses it, pass the todo_list to todo_list_check(), and
writes it back to the disk.
As get_missing_commit_check_level() and the enum
missing_commit_check_level are no longer needed inside of sequencer.c,
they are moved to rebase-interactive.c, and made static again.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces a new function to recreate the text of a todo list from
its commands and write it to a file. This will be useful as the next
few commits will change the use of the buffer in struct todo_list so it
will no longer be a mirror of the file on disk.
This functionality already exists in todo_list_transform(), but this
function was made to replace the buffer of a todo list, which is not
what we want here. Thus, the part of todo_list_transform() that
replaces the buffer is dropped, and the function is renamed
todo_list_to_strbuf(). It is called by todo_list_write_to_file() to
fill the buffer to write to the disk.
todo_list_write_to_file() can also take care of appending the help text
to the buffer before writing it to the disk, or to write only the first
n items of the list. This feature will be used by
skip_unnecessary_picks(), which has to write done commands in a file.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
