Leaving only the function definitions and declarations so that any
new topic in flight can still make use of the old functions, replace
existing uses of the prefixcmp() and suffixcmp() with new API
functions.
The change can be recreated by mechanically applying this:
$ git grep -l -e prefixcmp -e suffixcmp -- \*.c |
grep -v strbuf\\.c |
xargs perl -pi -e '
s|!prefixcmp\(|starts_with\(|g;
s|prefixcmp\(|!starts_with\(|g;
s|!suffixcmp\(|ends_with\(|g;
s|suffixcmp\(|!ends_with\(|g;
'
on the result of preparatory changes in this series.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 7192777 refactors git_parse_ulong, which is public, into a more
generic function. But since we kept the git_parse_ulong wrapper, only
that part needs to be public; nobody outside the file calls the
lower-level git_parse_unsigned.
Noticed with sparse. ("'git_parse_unsigned' was not declared. Should
it be static?")
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Explained-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
"git config" did not provide a way to set or access numbers larger
than a native "int" on the platform; it now provides 64-bit signed
integers on all platforms.
* jk/config-int-range-check:
git-config: always treat --int as 64-bit internally
config: make numeric parsing errors more clear
config: set errno in numeric git_parse_* functions
config: properly range-check integer values
config: factor out integer parsing from range checks
When you run "git config --int", the maximum size of integer
you get depends on how git was compiled, and what it
considers to be an "int".
This is almost useful, because your scripts calling "git
config" will behave similarly to git internally. But relying
on this is dubious; you have to actually know how git treats
each value internally (e.g., int versus unsigned long),
which is not documented and is subject to change. And even
if you know it is "unsigned long", we do not have a
git-config option to match that behavior.
Furthermore, you may simply be asking git to store a value
on your behalf (e.g., configuration for a hook). In that
case, the relevant range check has nothing at all to do with
git, but rather with whatever scripting tools you are using
(and git has no way of knowing what the appropriate range is
there).
Not only is the range check useless, but it is actively
harmful, as there is no way at all for scripts to look
at config variables with large values. For instance, one
cannot reliably get the value of pack.packSizeLimit via
git-config. On an LP64 system, git happily uses a 64-bit
"unsigned long" internally to represent the value, but the
script cannot read any value over 2G.
Ideally, the "--int" option would simply represent an
arbitrarily large integer. For practical purposes, however,
a 64-bit integer is large enough, and is much easier to
implement (and if somebody overflows it, we will still
notice the problem, and not simply return garbage).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we try to parse an integer config argument and get a
number outside of the representable range, we die with the
cryptic message: "bad config value for '%s'".
We can improve two things:
1. Show the value that produced the error (e.g., bad
config value '3g' for 'foo.bar').
2. Mention the reason the value was rejected (e.g.,
"invalid unit" versus "out of range").
A few tests need to be updated with the new output, but that
should not be representative of real-world breakage, as
scripts should not be depending on the exact text of our
stderr output, which is subject to i18n anyway.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are parsing an integer or unsigned long, we use
the strto*max functions, which properly set errno to ERANGE
if we get a large value. However, we also do further range
checks after applying our multiplication factor, but do not
set ERANGE. This means that a caller cannot tell if an error
was caused by ERANGE or if the input was simply not a valid
number.
This patch teaches git_parse_signed and git_parse_unsigned to set
ERANGE for range errors, and EINVAL for other errors, so that the
caller can reliably tell these cases apart.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we look at a config value as an integer using the
git_config_int function, we carefully range-check the value
we get and complain if it is out of our range. But the range
we compare to is that of a "long", which we then cast to an
"int" in the function's return value. This means that on
systems where "int" and "long" have different sizes (e.g.,
LP64 systems), we may pass the range check, but then return
nonsense by truncating the value as we cast it to an int.
We can solve this by converting git_parse_long into
git_parse_int, and range-checking the "int" range. Nobody
actually cared that we used a "long" internally, since the
result was truncated anyway. And the only other caller of
git_parse_long is git_config_maybe_bool, which should be
fine to just use int (though we will now forbid out-of-range
nonsense like setting "merge.ff" to "10g" to mean "true",
which is probably a good thing).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are parsing integers for config, we use an intmax_t
(or uintmax_t) internally, and then check against the size
of our result type at the end. We can parameterize the
maximum representable value, which will let us re-use the
parsing code for a variety of range checks.
Unfortunately, we cannot combine the signed and unsigned
parsing functions easily, as we have to rely on the signed
and unsigned C types internally.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to C99, section 7.1.4:
Any function declared in a header may be additionally
implemented as a function-like macro defined in the
header.
Therefore calling our struct member function pointer "fgetc"
may run afoul of unwanted macro expansion when we call:
char c = cf->fgetc(cf);
This turned out to be a problem on uclibc, which defines
fgetc as a macro and causes compilation failure.
The standard suggests fixing this in a few ways:
1. Using extra parentheses to inhibit the function-like
macro expansion. E.g., "(cf->fgetc)(cf)". This is
undesirable as it's ugly, and each call site needs to
remember to use it (and on systems without the macro,
forgetting will compile just fine).
2. Using #undef (because a conforming implementation must
also be providing fgetc as a function). This is
undesirable because presumably the implementation was
using the macro for a performance benefit, and we are
dropping that optimization.
Instead, we can simply use non-colliding names.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow configuration data to be read from in-tree blob objects,
which would help working in a bare repository and submodule
updates.
* hv/config-from-blob:
do not die when error in config parsing of buf occurs
teach config --blob option to parse config from database
config: make parsing stack struct independent from actual data source
config: drop cf validity check in get_next_char()
config: factor out config file stack management
If a config parsing error in a file occurs we can die and let the user
fix the issue. This is different for the buf parsing function since it
can be used to parse blobs of .gitmodules files. If a parsing error
occurs here we should proceed since otherwise a database containing such
an error in a single revision could be rendered unusable.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This can be used to read configuration values directly from git's
database. For example it is useful for reading to be checked out
.gitmodules files directly from the database.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To simplify adding other sources we extract all functions needed for
parsing into a list of callbacks. We implement those callbacks for the
current file parsing. A new source can implement its own set of callbacks.
Instead of storing the concrete FILE pointer for parsing we store a void
pointer. A new source can use this to store its custom data.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The global variable cf is set with an initialized value in all codepaths before
calling this function.
The complete call graph looks like this:
git_config_from_file
-> do_config_from
-> git_parse_file
-> get_next_char
-> get_value
-> get_next_char
-> parse_value
-> get_next_char
-> get_base_var
-> get_next_char
-> get_extended_base_var
-> get_next_char
The variable is initialized in do_config_from.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because a config callback may start parsing a new file, the
global context regarding the current config file is stored
as a stack. Currently we only need to manage that stack from
git_config_from_file. Let's factor it out to allow new
sources of config data.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
5f44324 (core: log offset pack data accesses happened - 2011-07-06)
provides a way to observe pack access patterns via a config
switch. Setting an environment variable looks more obvious than a
config var, especially when you just need to _observe_, and more
inline with other tracing knobs we have.
Document it as it may be useful for remote troubleshooting.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The configuration variable core.checkstat was advertised in the
documentation but the code expected core.statinfo instead.
For now, we accept both core.checkstat and core.statinfo, but the
latter will be removed in the longer term.
* jc/core-checkstat:
deprecate core.statinfo at Git 2.0 boundary
c08e4d5b5c (Enable minimal stat checking, 2013-01-22) advertised
the configuration variable core.checkstat in the documentation and
its log message, but the code expected core.statinfo instead.
For now, add core.checkstat, and warn people who have core.statinfo
in their configuration file that we will remove it in Git 2.0.
Noticed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The changes v1.7.12.1~2^2~4 (config: warn on inaccessible files,
2012-08-21) and v1.8.1.1~22^2~2 (config: treat user and xdg config
permission problems as errors, 2012-10-13) were intended to prevent
important configuration (think "[transfer] fsckobjects") from being
ignored when the configuration is unintentionally unreadable (for
example with EIO on a flaky filesystem, or with ENOMEM due to a DoS
attack). Usually ~/.gitconfig and ~/.config/git are readable by the
current user, and if they aren't then it would be easy to fix those
permissions, so the damage from adding this check should have been
minimal.
Unfortunately the access() check often trips when git is being run as
a server. A daemon (such as inetd or git-daemon) starts as "root",
creates a listening socket, and then drops privileges, meaning that
when git commands are invoked they cannot access $HOME and die with
fatal: unable to access '/root/.config/git/config': Permission denied
Any patch to fix this would have one of three problems:
1. We annoy sysadmins who need to take an extra step to handle HOME
when dropping privileges (the current behavior, or any other
proposal that they have to opt into).
2. We annoy sysadmins who want to set HOME when dropping privileges,
either by making what they want to do impossible, or making them
set an extra variable or option to accomplish what used to work
(e.g., a patch to git-daemon to set HOME when --user is passed).
3. We loosen the check, so some cases which might be noteworthy are
not caught.
This patch is of type (3).
Treat user and xdg configuration that are inaccessible due to
permissions (EACCES) as though no user configuration was provided at
all.
An alternative method would be to check if $HOME is readable, but that
would not help in cases where the user who dropped privileges had a
globally readable HOME with only .config or .gitconfig being private.
This does not change the behavior when /etc/gitconfig or .git/config
is unreadable (since those are more serious configuration errors),
nor when ~/.gitconfig or ~/.config/git is unreadable due to problems
other than permissions.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Improved-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Configuration parsing for tar.* configuration variables were
broken. Introduce a new config-keyname parser API to make the
callers much less error prone.
* jk/config-parsing-cleanup:
reflog: use parse_config_key in config callback
help: use parse_config_key for man config
submodule: simplify memory handling in config parsing
submodule: use parse_config_key when parsing config
userdiff: drop parse_driver function
convert some config callbacks to parse_config_key
archive-tar: use parse_config_key when parsing config
config: add helper function for parsing key names
Allow a configuration variable core.commentchar to customize the
character used to comment out the hint lines in the edited text from
the default '#'.
* jc/custom-comment-char:
Allow custom "comment char"
The config callback functions get keys of the general form:
section.subsection.key
(where the subsection may be contain arbitrary data, or may
be missing). For matching keys without subsections, it is
simple enough to call "strcmp". Matching keys with
subsections is a little more complicated, and each callback
does it in an ad-hoc way, usually involving error-prone
pointer arithmetic.
Let's provide a helper that keeps the pointer arithmetic all
in one place.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Specifically the fields uid, gid, ctime, ino and dev are set to zero
by JGit. Other implementations, eg. Git in cygwin are allegedly also
somewhat incompatible with Git For Windows and on *nix platforms
the resolution of the timestamps may differ.
Any stat checking by git will then need to check content, which may
be very slow, particularly on Windows. Since mtime and size
is typically enough we should allow the user to tell git to avoid
checking these fields if they are set to zero in the index.
This change introduces a core.checkstat config option where the
the user can select to check all fields (default), or just size
and the whole second part of mtime (minimal).
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some users do want to write a line that begin with a pound sign, #,
in their commit log message. Many tracking system recognise
a token of #<bugid> form, for example.
The support we offer these use cases is not very friendly to the end
users. They have a choice between
- Don't do it. Avoid such a line by rewrapping or indenting; and
- Use --cleanup=whitespace but remove all the hint lines we add.
Give them a way to set a custom comment char, e.g.
$ git -c core.commentchar="%" commit
so that they do not have to do either of the two workarounds.
[jc: although I started the topic, all the tests and documentation
updates, many of the call sites of the new strbuf_add_commented_*()
functions, and the change to git-submodule.sh scripted Porcelain are
from Ralf.]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Deal with a situation where .config/git is a file and we notice
.config/git/config is not readable due to ENOTDIR, not ENOENT.
* jn/warn-on-inaccessible-loosen:
config: exit on error accessing any config file
doc: advertise GIT_CONFIG_NOSYSTEM
config: treat user and xdg config permission problems as errors
config, gitignore: failure to access with ENOTDIR is ok
Help compilers' flow analysis by making it more explicit that
error() always returns -1, to reduce false "variable used
uninitialized" warnings. Looks somewhat ugly but not too much.
* jk/error-const-return:
silence some -Wuninitialized false positives
make error()'s constant return value more visible
There are a few error functions that simply wrap error() and
provide a standardized message text. Like error(), they
always return -1; knowing that can help the compiler silence
some false positive -Wuninitialized warnings.
One strategy would be to just declare these as inline in the
header file so that the compiler can see that they always
return -1. However, gcc does not always inline them (e.g.,
it will not inline opterror, even with -O3), which renders
our change pointless.
Instead, let's follow the same route we did with error() in
the last patch, and define a macro that makes the constant
return value obvious to the compiler.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a bare repository, there isn't a simple way to respect an
in-tree mailmap without extracting it to a temporary file.
This patch provides a config variable, similar to
mailmap.file, which reads the mailmap from a blob in the
repository.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Drop duplicate detection from "git-config --get"; this lets it
better match the internal config callbacks, which clears up some
corner cases with includes.
* jk/config-ignore-duplicates:
builtin/config.c: Fix a sparse warning
git-config: use git_config_with_options
git-config: do not complain about duplicate entries
git-config: collect values instead of immediately printing
git-config: fix regexp memory leaks on error conditions
git-config: remove memory leak of key regexp
t1300: test "git config --get-all" more thoroughly
t1300: remove redundant test
t1300: style updates
The get_value function has a goto label for cleaning up on
errors, but it only cleans up half of what the function
might allocate. Let's also clean up the key and regexp
variables there.
Note that we need to take special care when compiling the
regex fails to clean it up ourselves, since it is in a
half-constructed state (we would want to free it, but not
regfree it).
Similarly, we fix git_config_parse_key to return NULL when
it fails, not a pointer to some already-freed memory.
Signed-off-by: Jeff King <peff@peff.net>
There is convenience in warning and moving on when somebody has a
bogus permissions on /etc/gitconfig and cannot do anything about it.
But the cost in predictability and security is too high --- when
unreadable config files are skipped, it means an I/O error or
permissions problem causes important configuration to be bypassed.
For example, servers may depend on /etc/gitconfig to enforce security
policy (setting transfer.fsckObjects or receive.deny*). Best to
always error out when encountering trouble accessing a config file.
This may add inconvenience in some cases:
1. You are inspecting somebody else's repo, and you do not have
access to their .git/config file. Git typically dies in this
case already since we cannot read core.repositoryFormatVersion,
so the change should not be too noticeable.
2. You have used "sudo -u" or a similar tool to switch uid, and your
environment still points Git at your original user's global
config, which is not readable. In this case people really would
be inconvenienced (they would rather see the harmless warning and
continue the operation) but they can work around it by setting
HOME appropriately after switching uids.
3. You do not have access to /etc/gitconfig due to a broken setup.
In this case, erroring out is a good way to put pressure on the
sysadmin to fix the setup. While they wait for a reply, users
can set GIT_CONFIG_NOSYSTEM to true to keep Git working without
complaint.
After this patch, errors accessing the repository-local and systemwide
config files and files requested in include directives cause Git to
exit, just like errors accessing ~/.gitconfig.
Explained-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git reads multiple configuration files: settings come first from the
system config file (typically /etc/gitconfig), then the xdg config
file (typically ~/.config/git/config), then the user's dotfile
(~/.gitconfig), then the repository configuration (.git/config).
Git has always used access(2) to decide whether to use each file; as
an unfortunate side effect, that means that if one of these files is
unreadable (e.g., EPERM or EIO), git skips it. So if I use
~/.gitconfig to override some settings but make a mistake and give it
the wrong permissions then I am subject to the settings the sysadmin
chose for /etc/gitconfig.
Better to error out and ask the user to correct the problem.
This only affects the user and xdg config files, since the user
presumably has enough access to fix their permissions. If the system
config file is unreadable, the best we can do is to warn about it so
the user knows to notify someone and get on with work in the meantime.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously while reading the variable names in config files, there
was a 256 character limit with at most 128 of those characters being
used by the section header portion of the variable name. This
limitation was only enforced while reading the config files. It was
possible to write a config file that was not subsequently readable.
Instead of enforcing this limitation for both reading and writing,
remove it entirely by changing the var member of the config_file
struct to a strbuf instead of a fixed length buffer. Update all of
the parsing functions in config.c to use the strbuf instead of the
static buffer.
The parsing functions that returned the base length of the variable
name now return simply 0 for success and -1 for failure. The base
length information is obtained through the strbuf's len member.
We now send the buf member of the strbuf to external callback
functions to preserve the external api. None of the external
callers rely on the old size limitation for sizing their own buffers
so removing the limit should have no externally visible effect.
Signed-off-by: Ben Walton <bdwalton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before reading a config file, we check "!access(path, R_OK)"
to make sure that the file exists and is readable. If it's
not, then we silently ignore it.
For the case of ENOENT, this is fine, as the presence of the
file is optional. For other cases, though, it may indicate a
configuration error (e.g., not having permissions to read
the file). Let's print a warning in these cases to let the
user know.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When $HOME is unset, home_config_paths fails and returns NULL pointers
for user_config and xdg_config. Valgrind complains with Syscall param
access(pathname) points to unaddressable byte(s).
Don't call blindly access() on these variables, but test them for
NULL-ness before.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teaches git to normalize pathnames read from readdir(3) and all
arguments from the command line into precomposed UTF-8 (assuming
that they come as decomposed UTF-8) to work around issues on Mac OS.
I think there still are other places that need conversion
(e.g. paths that are read from stdin for some commands), but this
should be a good first step in the right direction.
* tb/sanitize-decomposed-utf-8-pathname:
git on Mac OS and precomposed unicode
Mac OS X mangles file names containing unicode on file systems HFS+,
VFAT or SAMBA. When a file using unicode code points outside ASCII
is created on a HFS+ drive, the file name is converted into
decomposed unicode and written to disk. No conversion is done if
the file name is already decomposed unicode.
Calling open("\xc3\x84", ...) with a precomposed "Ä" yields the same
result as open("\x41\xcc\x88",...) with a decomposed "Ä".
As a consequence, readdir() returns the file names in decomposed
unicode, even if the user expects precomposed unicode. Unlike on
HFS+, Mac OS X stores files on a VFAT drive (e.g. an USB drive) in
precomposed unicode, but readdir() still returns file names in
decomposed unicode. When a git repository is stored on a network
share using SAMBA, file names are send over the wire and written to
disk on the remote system in precomposed unicode, but Mac OS X
readdir() returns decomposed unicode to be compatible with its
behaviour on HFS+ and VFAT.
The unicode decomposition causes many problems:
- The names "git add" and other commands get from the end user may
often be precomposed form (the decomposed form is not easily input
from the keyboard), but when the commands read from the filesystem
to see what it is going to update the index with already is on the
filesystem, readdir() will give decomposed form, which is different.
- Similarly "git log", "git mv" and all other commands that need to
compare pathnames found on the command line (often but not always
precomposed form; a command line input resulting from globbing may
be in decomposed) with pathnames found in the tree objects (should
be precomposed form to be compatible with other systems and for
consistency in general).
- The same for names stored in the index, which should be
precomposed, that may need to be compared with the names read from
readdir().
NFS mounted from Linux is fully transparent and does not suffer from
the above.
As Mac OS X treats precomposed and decomposed file names as equal,
we can
- wrap readdir() on Mac OS X to return the precomposed form, and
- normalize decomposed form given from the command line also to the
precomposed form,
to ensure that all pathnames used in Git are always in the
precomposed form. This behaviour can be requested by setting
"core.precomposedunicode" configuration variable to true.
The code in compat/precomposed_utf8.c implements basically 4 new
functions: precomposed_utf8_opendir(), precomposed_utf8_readdir(),
precomposed_utf8_closedir() and precompose_argv(). The first three
are to wrap opendir(3), readdir(3), and closedir(3) functions.
The argv[] conversion allows to use the TAB filename completion done
by the shell on command line. It tolerates other tools which use
readdir() to feed decomposed file names into git.
When creating a new git repository with "git init" or "git clone",
"core.precomposedunicode" will be set "false".
The user needs to activate this feature manually. She typically
sets core.precomposedunicode to "true" on HFS and VFAT, or file
systems mounted via SAMBA.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git to read the "gitconfig" information from a new location,
$XDG_CONFIG_HOME/git/config; this allows the user to avoid
cluttering $HOME with many per-application configuration files.
In the order of reading, this file comes between the global
configuration file (typically $HOME/.gitconfig) and the system wide
configuration file (typically /etc/gitconfig).
We do not write to this new location (yet).
If $XDG_CONFIG_HOME is either not set or empty, $HOME/.config/git/config
will be used. This is in line with XDG specification.
If the new file does not exist, the behavior is unchanged.
Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no reason for this to be in config, except that once
upon a time all of the config parsing was there. It makes
more sense to keep the ident code together.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
New users tend to work on one branch at a time and push the result
out. The current and upstream modes of push is a more suitable default
mode than matching mode for these people, but neither is surprise-free
depending on how the project is set up. Introduce a "simple" mode that
is a subset of "upstream" but only works when the branch is named the same
between the remote and local repositories.
The plan is to make it the new default when push.default is not
configured.
By Matthieu Moy (5) and others
* mm/simple-push:
push.default doc: explain simple after upstream
push: document the future default change for push.default (matching -> simple)
t5570: use explicit push refspec
push: introduce new push.default mode "simple"
t5528-push-default.sh: add helper functions
Undocument deprecated alias 'push.default=tracking'
Documentation: explain push.default option a bit more
"git config --rename-section" to rename an existing section into a
bogus one did not check the new name.
By Jeff King
* jk/maint-config-bogus-section:
config: reject bogus section names for --rename-section
You can already use relative paths in include.path, which
means that including "foo" from your global "~/.gitconfig"
will look in your home directory. However, you might want to
do something clever like putting "~/.gitconfig-foo" in a
specific repository's config file.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can feed junk to "git config --rename-section", which
will result in a config file that git will not even parse
(so you cannot fix it with git-config). We already have
syntactic sanity checks when setting a variable; let's do
the same for section names.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When calling "git push" without argument, we want to allow Git to do
something simple to explain and safe. push.default=matching is unsafe
when used to push to shared repositories, and hard to explain to
beginners in some contexts. It is debatable whether 'upstream' or
'current' is the safest or the easiest to explain, so introduce a new
mode called 'simple' that is the intersection of them: push to the
upstream branch, but only if it has the same name remotely. If not, give
an error that suggests the right command to push explicitely to
'upstream' or 'current'.
A question is whether to allow pushing when no upstream is configured. An
argument in favor of allowing the push is that it makes the new mode work
in more cases. On the other hand, refusing to push when no upstream is
configured encourages the user to set the upstream, which will be
beneficial on the next pull. Lacking better argument, we chose to deny
the push, because it will be easier to change in the future if someone
shows us wrong.
Original-patch-by: Jeff King <peff@peff.net>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git config" diagnoses an error in a configuration file and
shows the line number for the offending line, it miscounted if the
error was at the end of line.
By Martin Stenberg
* ms/maint-config-error-at-eol-linecount:
config: report errors at the EOL with correct line number
Conflicts:
t/t1300-repo-config.sh
A section in a config file with a missing "]" reports the next line
as bad, same goes to a value with a missing end quote.
This happens because the error is not detected until the end of the
line, when line number is already increased. Fix this by decreasing
line number by one for these cases.
Signed-off-by: Martin Stenberg <martin@gnutiken.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be useful to split your ~/.gitconfig across multiple
files. For example, you might have a "main" file which is
used on many machines, but a small set of per-machine
tweaks. Or you may want to make some of your config public
(e.g., clever aliases) while keeping other data back (e.g.,
your name or other identifying information). Or you may want
to include a number of config options in some subset of your
repos without copying and pasting (e.g., you want to
reference them from the .git/config of participating repos).
This patch introduces an include directive for config files.
It looks like:
[include]
path = /path/to/file
This is syntactically backwards-compatible with existing git
config parsers (i.e., they will see it as another config
entry and ignore it unless you are looking up include.path).
The implementation provides a "git_config_include" callback
which wraps regular config callbacks. Callers can pass it to
git_config_from_file, and it will transparently follow any
include directives, passing all of the discovered options to
the real callback.
Include directives are turned on automatically for "regular"
git config parsing. This includes calls to git_config, as
well as calls to the "git config" program that do not
specify a single file (e.g., using "-f", "--global", etc).
They are not turned on in other cases, including:
1. Parsing of other config-like files, like .gitmodules.
There isn't a real need, and I'd rather be conservative
and avoid unnecessary incompatibility or confusion.
2. Reading single files via "git config". This is for two
reasons:
a. backwards compatibility with scripts looking at
config-like files.
b. inspection of a specific file probably means you
care about just what's in that file, not a general
lookup for "do we have this value anywhere at
all". If that is not the case, the caller can
always specify "--includes".
3. Writing files via "git config"; we want to treat
include.* variables as literal items to be copied (or
modified), and not expand them. So "git config
--unset-all foo.bar" would operate _only_ on
.git/config, not any of its included files (just as it
also does not operate on ~/.gitconfig).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
