Since 0beee4c (git-add--interactive: remove hunk coalescing, 2008-07-02),
"git add--interactive" behaves lazily and passes overlapping hunks to the
underlying "git apply" without coalescing. This was partially corrected
by 7a26e65 (its partial revert, 2009-05-16), but overlapping hunks are
still passed when the patch is edited.
Teach "git apply" the --allow-overlap option that disables a safety
feature that avoids misapplication of patches by not applying patches
to overlapping hunks, and pass this option form "add -p" codepath.
Do not even advertise the option, as this is merely a workaround, and the
correct fix is to make "add -p" correctly coalesce adjacent patch hunks.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Depending on the direction and the target of patch application, we would
need to pass --cached and --reverse to underlying "git apply". Also we
only pass --check when we are not applying but just checking.
But we always pass --recount since 8cbd431 (git-add--interactive: replace
hunk recounting with apply --recount, 2008-07-02). Instead of repeating
the same --recount over and over again, move it to a single place that
actually runs the command, namely, "run_git_apply" subroutine.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Arnaud Lacombe reported that with the recent change to reject overlapping
hunks fed to "git apply", the edit mode of an "add -p" session that lazily
feeds overlapping hunks without coalescing adjacent ones claim that the
patch does not apply. Expose the problem to be fixed.
Cf. http://thread.gmane.org/gmane.comp.version-control.git/170685/focus=171000
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "quit" command was added in 9a7a1e0 (git add -p: new "quit" command at
the prompt, 2009-04-10) to allow the user to say that hunks other than
what have already been chosen are undesirable, and exit the interactive
loop immediately. It forgot that there may be an undecided hunk before
the current one. In such a case, the interactive loop still goes back to
the beginning.
Clear all the USE bit for undecided hunks and exit the loop.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the command cannot make a connection to the SMTP server the error
message to diagnose the broken configuration is issued. However, when an
optional smtp-server-port is given and needs to be reported, the message
lacked a space between "hello=<smtp-domain>" and "port=<smtp-server-port>".
Signed-off-by: Sylvain Rabot <sylvain@abstraction.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The names and e-mails are sanitized by fmt_ident() when creating commits,
so that they do not contain "<" nor ">", and the "committer" and "author"
lines in the commit object will always be in the form:
("author" | "committer") name SP "<" email ">" SP timestamp SP zone
When parsing the email part out, the current code looks for SP starting
from the end of the email part, but the author could obfuscate the address
as "author at example dot com".
We should instead look for SP followed by "<", to match the logic of the
side that formats these lines.
Signed-off-by: Josh Stone <jistone@redhat.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Definitions of ETC_GITCONFIG, ETC_GITATTRIBUTES and sysconfdir depend on
value of prefix. As prefix can be changed in config.mak.autogen, all if
blocks with conditions based on prefix should be placed after the file
is included in Makefile.
Signed-off-by: Kacper Kornet <draenog@pld-linux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git rebase' uses 'git merge' to preserve merges (-p). This preserves
the original merge commit correctly, except when the original merge
commit was created by 'git merge --no-ff'. In this case, 'git rebase'
will fail to preserve the merge, because during 'git rebase', 'git
merge' will simply fast-forward and skip the commit. For example:
B
/ \
A---M
/
---o---O---P---Q
If we try to rebase M onto P, we lose the merge commit and this happens:
A---B
/
---o---O---P---Q
To correct this, we simply do a "no fast-forward" on all merge commits
when rebasing. Since by the time we decided to do a 'git merge' inside
'git rebase', it means there was a merge originally, so 'git merge'
should always create a merge commit regardless of what the merge
branches look like. This way, when rebase M onto P from the above
example, we get:
B
/ \
A---M
/
---o---O---P---Q
Signed-off-by: Andrew Wong <andrew.kw.w@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reading the diff-family and config man pages one may think that the
color.diff and color.ui settings apply to all diff commands. Make it
clearer that they do not apply to the plumbing variants
diff-{files,index,tree}.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If somebody has a name that includes an rfc822 special, we
will output it literally in the "From:" header. This is
usually OK, but certain characters (like ".") are supposed
to be enclosed in double-quotes in a mail header.
In practice, whether this matters may depend on your MUA.
Some MUAs will happily take in:
From: Foo B. Bar <author@example.com>
without quotes, and properly quote the "." when they send
the actual mail. Others may not, or may screw up harder
things like:
From: Foo "The Baz" Bar <author@example.com>
For example, mutt will strip the quotes, thinking they are
actual syntactic rfc822 quotes.
So let's quote properly, and then (if necessary) we still
apply rfc2047 encoding on top of that, which should make all
MUAs happy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For projects that do not release official archives, gitweb's snapshot
feature would be an excellent alternative, and but without the '-n'
('--no-name') argument, gzip includes a timestamp in output which results
in different files. Because some systems hash/checksum downloaded files
to ensure integrity of the tarball (e.g FreeBSD), it is desirable to
produce tarballs in a reproducible way for that purpose.
Whilst '--no-name' is more descriptive, the long version of the flag is
not supported on all systems. In particular, OpenBSD does not appear to
support it.
Supply '-n' to gzip to exclude timestamp from output and produce idential
output every time.
Signed-off-by: Fraser Tweedale <frase@frase.id.au>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark subcommand names as 'subcommand' to make them stand out.
Signed-off-by: Valentin Haenel <valentin.haenel@gmx.de>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The options '---use-log-author' and '--add-author-from' are applicable to other
subcommands except 'fetch' -- therefore move them from the 'fetch' section to
the more general 'options' section.
Signed-off-by: Valentin Haenel <valentin.haenel@gmx.de>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option '--add-author-from' is used in 'commit-diff', 'set-tree', and
'dcommit' subcommands.
Signed-off-by: Valentin Haenel <valentin.haenel@gmx.de>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document all test function arguments in the same way.
While at it, tweak the description of test_path_is_* (thanks to Junio),
and correct some grammatical errors.
Signed-off-by: Mathias Lafeldt <misfire@debugon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After posting a short request using CURLOPT_POSTFIELDS, if the slot
is reused for posting a large payload, the slot ends up having both
POSTFIELDS (which now points at a random garbage) and READFUNCTION,
in which case the curl library tries to use the stale POSTFIELDS.
Clear it as part of the general slot initialization in get_active_slot().
Heavylifting-by: Shawn Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Shawn Pearce <spearce@spearce.org>
* js/maint-1.6.6-send-pack-stateless-rpc-deadlock-fix:
send-pack: avoid deadlock when pack-object dies early
Evil merge to adjust the way the use of pthreads in sideband-demultiplexor
was decided (earlier it was "if we are not on Windows", now it is "if we
are not using pthreads").
Send-pack deadlocks in two ways when pack-object dies early (for example,
because there is some repo corruption).
The first deadlock happens with the smart push protocol (--stateless-rpc).
After the initial rev-exchange, the remote is waiting for the pack data
to arrive, and the sideband demuxer at the local side continues trying to
stream data from the remote repository until it gets EOF. Meanwhile,
send-pack (in function pack_objects()) has noticed that pack-objects did
not produce output and died. Back in send_pack(), it now tries to clean
up the sideband demuxer using finish_async(). The demuxer, however, waits
for the remote end to close down, the remote waits for pack data, and
the reason that it still waits is that send-pack forgot to close the
outgoing channel. Add the missing close() in pack_objects().
The second deadlock happens in a similar constellation when the sideband
demuxer runs in a forked process (rather than in a thread). Again, the
remote end waits for pack data to arrive, the sideband demuxer waits for
the remote to shut down, and send-pack (in the regular clean-up) waits for
the demuxer to terminate. This time, the send-pack parent process closes
the writable end of the outgoing channel (in start_command() that spawned
pack-objects) so that after the death of the pack-objects process all
writable ends should have been closed and the remote repo should see EOF.
This does not happen, however, because when the sideband demuxer was forked
earlier, it also inherited a writable end; it remains open and keeps the
remote repo from seeing EOF. To break this deadlock, close the writable end
in the demuxer.
Analyzed-by: Jeff King <peff@peff.net>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git add -u" updates the index with the updated contents from the working
tree by internally running "diff-files" to grab the set of paths that are
different from the index. Then it updates the index entries for the paths
that are modified in the working tree, and deletes the index entries for
the paths that are deleted in the working tree.
It ignored the output from the diff-files that indicated that a path is
unmerged. For these paths, it instead relied on the fact that an unmerged
path is followed by the result of comparison between stage #2 (ours) and
the working tree, and used that to update or delete such a path when it is
used to record the resolution of a conflict.
As the result, when a path did not have stage #2 (e.g. "we deleted while
the other side added"), these unmerged stages were left behind, instead of
recording what the user resolved in the working tree.
Since we recently fixed "diff-files" to indicate if the corresponding path
exists on the working tree for an unmerged path, we do not have to rely on
the comparison with stage #2 anymore. We can instead tell the diff-files
not to compare with higher stages, and use the unmerged output to update
the index to reflect the state of the working tree.
The changes to the test vector in t2200 illustrates the nature of the bug
and the fix. The test expected stage #1 and #3 entries be left behind,
but it was codifying the buggy behaviour.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, e9c8409 (diff-index --cached --raw: show tree entry on the LHS
for unmerged entries., 2007-01-05) taught the command to show the object
name and the mode from the entry coming from the tree side when comparing
a tree with an unmerged index.
This is a belated companion patch that teaches diff-files to show the mode
from the entry coming from the working tree side, when comparing an
unmerged index and the working tree.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
e9c8409 (diff-index --cached --raw: show tree entry on the LHS for
unmerged entries., 2007-01-05) added a <mode, object name> pair as
parameters to this function, to store them in the pre-image side of an
unmerged file pair. Now the function is fixed to return the filepair it
queued, we can make the caller on the special case codepath to do so.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The underlying diff_queue() returns diff_filepair so that the caller can
further add information to it, and the helper function diff_unmerge()
utilizes the feature itself, but does not expose it to its callers, which
was kind of selfish.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no need to duplicate the definition of $_z40 and $_x40 that
test-lib.sh supplies the test scripts.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When relative dates are more than about a year ago, we start
writing them as "Y years, M months". At the point where we
calculate Y and M, we have the time delta specified as a
number of days. We calculate these integers as:
Y = days / 365
M = (days % 365 + 15) / 30
This rounds days in the latter half of a month up to the
nearest month, so that day 16 is "1 month" (or day 381 is "1
year, 1 month").
We don't round the year at all, though, meaning we can end
up with "1 year, 12 months", which is silly; it should just
be "2 years".
Implement this differently with months of size
onemonth = 365/12
so that
totalmonths = (long)( (days + onemonth/2)/onemonth )
years = totalmonths / 12
months = totalmonths % 12
In order to do this without floats, we write the first formula as
totalmonths = (days*12*2 + 365) / (365*2)
Tests and inspiration by Jeff King.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If start_command fails after forking and before exec finishes, there
is not much use in noticing an I/O error on top of that.
finish_command will notice that the child exited with nonzero status
anyway. So as noted in v1.7.0.3~20^2 (run-command.c: fix build
warnings on Ubuntu, 2010-01-30) and v1.7.5-rc0~29^2 (2011-03-16), it
is safe to ignore errors from write in this codepath.
Even so, the result from write contains useful information: it tells
us if the write was cancelled by a signal (EINTR) or was only
partially completed (e.g., when writing to an almost-full pipe).
Let's use write_in_full to loop until the desired number of bytes have
been written (still ignoring errors if that fails).
As a happy side effect, the assignment to a dummy variable to appease
gcc -D_FORTIFY_SOURCE is no longer needed. xwrite and write_in_full
check the return value from write(2).
Noticed with gcc -Wunused-but-set-variable.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In git versions starting at v1.7.5-rc0~29^2 until v1.7.5-rc3~2 (Revert
"run-command: prettify -D_FORTIFY_SOURCE workaround", 2011-04-18)
fixed it, the run_command facility would write a truncated error
message when the command is present but cannot be executed for some
other reason. For example, if I add a 'hello' command to git:
$ echo 'echo hello' >git-hello
$ chmod +x git-hello
$ PATH=.:$PATH git hello
hello
and make it non-executable, this is what I normally get:
$ chmod -x git-hello
$ git hello
fatal: cannot exec 'git-hello': Permission denied
But with the problematic versions, we get disturbing output:
$ PATH=.:$PATH git hello
fatal: $
Add some tests to make sure it doesn't happen again.
The hello-script used in these tests uses cat instead of echo because
on Windows the bash spawned by git converts LF to CRLF in text written
by echo while the bash running tests does not, causing the test to
fail if "echo" is used. Thanks to Hannes for noticing.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Improved-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Of the (now) three methods to send unmangled patches using Thunderbird,
this method is listed first because it provides a single-click on-demand
option rather than a permanent change of configuration like the other
two methods.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
6abd933 (git-svn: allow the mergeinfo property to be set, 2010-09-24)
introduced the --mergeinfo option. Document it.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for "cherry-pick -x" could be misread in the way that a
"git notes" object is attached to the new commit, which is not the case.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The hints in SubmittingPatches about stopping GMail from clobbering
patches are widely useful both as examples of "git send-email" and
"git imap-send" usage.
Move the documentation to the appropriate places.
While at it, don't encourage storing passwords in config files.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These hints are in git's private SubmittingPatches document but a
wider audience might be interested. Move them to the "git
format-patch" manpage.
I'm not sure what gotchas these hints are meant to work around.
They might be completely false.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The standard reference for this information is the article
"Plain text e-mail - Thunderbird#Completely_plain_email" at
kb.mozillazine.org, but the hints hidden away in git's
SubmittingPatches file are more complete. Move them to the
"git format-patch" manual so they can be installed with git and
read by a wide audience.
While at it, make some tweaks:
- update "Approach #1" so it might work with Thunderbird 3;
- remove ancient version numbers from the descriptions of both
approaches so current readers might have more reason to
complain if they don't work.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SubmittingPatches has some excellent advice about how to check a patch
for corruption before sending it off. Move it to the format-patch
manual so it can be installed with git's documentation for use by
people not necessarily interested in the git project's practices.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a DISCUSSION section to the "git format-patch" manual to encourage
people to send patches in a form that can be applied by "git am"
automatically. There are two such forms:
1. The default form in which most metadata goes in the mail header
and the message body starts with the patch description;
2. The snipsnip form in which a message starts with pertinent
discussion and ends with a patch after a "scissors" mark.
The example requires QP encoding in the "Subject:" header intended for
the mailer to give the reader a chance to reflect on that, rather than
being startled by it later. By contrast, in-body "From:" and
"Subject:" lines should be human-readable and not QP encoded.
Inspired-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Improved-by: Junio C Hamano <gitster@pobox.com>
Improved-by: Drew Northup <drew.northup@maine.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Restructure the text of git-merge-base to better explain more clearly
the different modes of operation.
Signed-off-by: Vincent van Ravesteijn <vfr@lyx.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike plain merge-base, merge-base --octopus only requires at least one
commit argument; update the synopsis to reflect that.
Add a sentence to the discussion that when --octopus is used, we do expect
'2' (the common ansestor across all) as the result.
Signed-off-by: Vincent van Ravesteijn <vfr@lyx.org>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Two tests looked for "[Uu]sage" in the output, but we cannot expect the
l10n to use that phrase. Mark them with test_i18ngrep so that in later
versions we can test truly localized versions with the same tests, not
just GETTEXT_POISON that happens to keep the original string in the
output.
Merge a few tests that were artificially split into "do" and "test output
under C_LOCALE_OUTPUT" in the original i18n patches back.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The local value of the config variable tar.umask is not passed to the
other side with --remote. We may want to change that, but for now just
document this fact.
Reported-by: Jacek Masiulaniec <jacek.masiulaniec@gmail.com>
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
