When the webserver responds with "405 Method Not Allowed", it
should tell the client what methods are allowed with the "Allow"
header.
* bc/http-backend-allow-405:
http-backend: provide Allow header for 405
Micro optimize hash function used in the object hash table.
* np/lookup-object-hashing:
lookup_object: remove hashtable_index() and optimize hash_obj()
Just like "git checkout -" knows to check out and "git merge -"
knows to merge the branch you were previously on, "git cherry-pick"
now understands "git cherry-pick -" to pick from the previous
branch.
* hu/cherry-pick-previous-branch:
cherry-pick: allow "-" as abbreviation of '@{-1}'
"git status" now omits the prefix to make its output a comment in a
commit log editor, which is not necessary for human consumption.
We may want to tighten the output to omit unnecessary trailing blank
lines, but that does not have to be in the scope of this series.
* mm/status-without-comment-char:
t7508: avoid non-portable sed expression
status: add missing blank line after list of "other" files
tests: don't set status.displayCommentPrefix file-wide
status: disable display of '#' comment prefix by default
submodule summary: ignore --for-status option
wt-status: use argv_array API
builtin/stripspace.c: fix broken indentation
Make "foo^{tag}" to peel a tag to itself, i.e. no-op., and fail if
"foo" is not a tag. "git rev-parse --verify v1.0^{tag}" would be a
more convenient way to say "test $(git cat-file -t v1.0) = tag".
* rh/peeling-tag-to-tag:
peel_onion: do not assume length of x_type globals
peel_onion(): add support for <rev>^{tag}
"git branch -v -v" (and "git status") did not distinguish among a
branch that does not build on any other branch, a branch that is in
sync with the branch it builds on, and a branch that is configured
to build on some other branch that no longer exists.
* jx/branch-vv-always-compare-with-upstream:
status: always show tracking branch even no change
branch: report invalid tracking branch as gone
When there is no sufficient overlap between old and new history
during a fetch into a shallow repository, we unnecessarily sent
objects the sending side knows the receiving end has.
* nd/fetch-into-shallow:
Add testcase for needless objects during a shallow fetch
list-objects: mark more commits as edges in mark_edges_uninteresting
list-objects: reduce one argument in mark_edges_uninteresting
upload-pack: delegate rev walking in shallow fetch to pack-objects
shallow: add setup_temporary_shallow()
shallow: only add shallow graft points to new shallow file
move setup_alternate_shallow and write_shallow_commits to shallow.c
Commit 05c1eb1 (push: teach --force-with-lease to smart-http
transport) fixed the compare-and-swap test in t5541. It
tried to mark the test as passing by teaching the test
helper function to expect an extra "success or failure"
parameter, but forgot to actually use the parameter in the
helper.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit a908047 taught format-patch the "--from" option,
which places the author ident into an in-body from header,
and uses the committer ident in the rfc822 from header. The
documentation claims that it will omit the in-body header
when it is the same as the rfc822 header, but the code never
implemented that behavior.
This patch completes the feature by comparing the two idents
and doing nothing when they are the same (this is the same
as simply omitting the in-body header, as the two are by
definition indistinguishable in this case). This makes it
reasonable to turn on "--from" all the time (if it matches
your particular workflow), rather than only using it when
exporting other people's patches.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to Bash's default filename completion, our git-aware filename
completion stops at directory boundaries, i.e. it doesn't offer the
full 'path/to/file' at first, but only 'path/'. To achieve that the
completion script runs 'git ls-files' with specific command line
options to get the list of relevant paths under the current directory,
and then processes each path to strip all but the base directory or
filename (see __git_index_files()).
To offer only modified and untracked files for 'git add' the
completion script runs 'git ls-files --exclude-standard --others
--modified'. This command lists all non-ignored files in untracked
directories, which leads to a noticeable delay caused by the
processing mentioned above if there are a lot of such files
(__git_index_files() specifies '--exclude-standard' internally):
$ mkdir untracked-dir
$ for i in {1..10000} ; do >untracked-dir/$i ; done
$ time __git_index_files "--others --modified"
untracked-dir
real 0m0.537s
user 0m0.452s
sys 0m0.160s
Eliminate this delay by additionally passing the '--directory
--no-empty-directory' options to 'git ls-files' to show only the
directory name of non-empty untracked directories instead their whole
content:
$ time __git_index_files "--others --modified --directory --no-empty-directory"
untracked-dir
real 0m0.029s
user 0m0.020s
sys 0m0.004s
Filename completion for 'git clean' suffers from the same delay, as it
offers untracked files, too. The fix could be the same, but since it
actually makes sense to 'git clean' empty directories, in this case we
only pass the '--directory' option to 'git ls-files'.
Reported-by: Isaac Levy <ilevy@google.com>
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of repeating the text to record as the commit log message
and string we expect to see in "log" output, use the same variable
to avoid them going out of sync.
Use different names for test files in different directories to
improve our chance to catch future breakages that makes "-C <dir>"
go to a place that is different from what was specified.
Signed-off-by: Nazri Ramliy <ayiehere@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of git's traversals are robust against minor breakages
in commit data. For example, "git log" will still output an
entry for a commit that has a broken encoding or missing
author, and will not abort the whole operation.
Shortlog, on the other hand, will die as soon as it sees a
commit without an author, meaning that a repository with
a broken commit cannot get any shortlog output at all.
Let's downgrade this fatal error to a warning, and continue
the operation.
We simply ignore the commit and do not count it in the total
(since we do not have any author under which to file it).
Alternatively, we could output some kind of "<empty>" record
to collect these bogus commits. It is probably not worth it,
though; we have already warned to stderr, so the user is
aware that such bogosities exist, and any placeholder we
came up with would either be syntactically invalid, or would
potentially conflict with real data.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some people still use rather old versions of bash, which cannot grok
some constructs like 'printf -v varname' the prompt and completion
code started to use recently.
* bc/completion-for-bash-3.0:
contrib/git-prompt.sh: handle missing 'printf -v' more gracefully
t9902-completion.sh: old Bash still does not support array+=('') notation
git-completion.bash: use correct Bash/Zsh array length syntax
Fixes a minor bug in "git rebase -i" (there could be others, as the
root cause is pretty generic) where the code feeds a random, data
dependeant string to 'echo' and expects it to come out literally.
* mm/no-shell-escape-in-die-message:
die_with_status: use "printf '%s\n'", not "echo"
Output from "git log --full-diff -- <pathspec>" looked strange,
because comparison was done with the previous ancestor that touched
the specified <pathspec>, causing the patches for paths outside the
pathspec to show more than the single commit has changed.
* tr/log-full-diff-keep-true-parents:
log: use true parents for diff when walking reflogs
log: use true parents for diff even when rewriting
The auto-tag-following code in "git fetch" tries to reuse the same
transport twice when the serving end does not cooperate and does
not give tags that point to commits that are asked for as part of
the primary transfer. Unfortunately, Git-aware transport helper
interface is not designed to be used more than once, hence this
does not work over smart-http transfer.
* jc/transport-do-not-use-connect-twice-in-fetch:
builtin/fetch.c: Fix a sparse warning
fetch: work around "transport-take-over" hack
fetch: refactor code that fetches leftover tags
fetch: refactor code that prepares a transport
fetch: rename file-scope global "transport" to "gtransport"
t5802: add test for connect helper
Send a large request to read(2)/write(2) as a smaller but still
reasonably large chunks, which would improve the latency when the
operation needs to be killed and incidentally works around broken
64-bit systems that cannot take a 2GB write or read in one go.
* sp/clip-read-write-to-8mb:
Revert "compat/clipped-write.c: large write(2) fails on Mac OS X/XNU"
xread, xwrite: limit size of IO to 8MB
While normalizing a URL, we forgot that the buffer that holds it
could be relocated when it grows, which was a brown-paper-bag bug
that can lead to a crash introduced on 'master' post 1.8.4 release.
* jc/url-match:
urlmatch.c: recompute pointer after append_normalized_escapes
"git cvsserver" computed the permission mode bits incorrectly for
executable files.
* jc/cvsserver-perm-bit-fix:
cvsserver: pick up the right mode bits
When send-email comes up with an error message to die with upon
failure to start an SSL session, it tried to read the error string
from a wrong place.
* bc/send-email-ssl-die-message-fix:
send-email: don't call methods on undefined values
"git-svn" used with SVN 1.8.0 when talking over https:// connection
dumped core due to a bug in the serf library that SVN uses. Work
it around on our side, even though the SVN side is being fixed.
* uh/git-svn-serf-fix:
git-svn: fix termination issues for remote svn connections
* fc/contrib-bzr-hg-fixes:
contrib/remote-helpers: quote variable references in redirection targets
contrib/remote-helpers: style updates for test scripts
remote-hg: use notes to keep track of Hg revisions
remote-helpers: cleanup more global variables
remote-helpers: trivial style fixes
remote-hg: improve basic test
remote-hg: add missing &&s in the test
remote-hg: fix test
remote-bzr: make bzr branches configurable per-repo
remote-bzr: fix export of utf-8 authors
The implementation of "add -i" has a crippling code to work around
ActiveState Perl limitation but it by mistake also triggered on Git
for Windows where MSYS perl is used.
* js/add-i-mingw:
add--interactive: fix external command invocation on Windows
A packfile that stores the same object more than once is broken and
will be rejected by "git index-pack" that is run when receiving data
over the wire.
* jk/duplicate-objects-in-packs:
t5308: check that index-pack --strict detects duplicate objects
test index-pack on packs with recoverable delta cycles
add tests for indexing packs with delta cycles
sha1-lookup: handle duplicate keys with GIT_USE_LOOKUP
test-sha1: add a binary output mode
We made sure that we notice the user-supplied GIT_DIR is actually a
gitfile, but did not do the same when the default ".git" is a gitfile.
* nd/git-dir-pointing-at-gitfile:
Make setup_git_env() resolve .git file when $GIT_DIR is not specified
If a build-time fallback is set to "cat" instead of "less", we
should apply the same "no subprocess or pipe" optimization as we
apply to user-supplied GIT_PAGER=cat.
* jk/pager-bypass-cat-for-default-pager:
pager: turn on "cat" optimization for DEFAULT_PAGER
Modernize tests.
* fc/rev-parse-test-updates:
rev-parse test: use standard test functions for setup
rev-parse test: use test_cmp instead of "test" builtin
rev-parse test: use test_must_fail, not "if <command>; then false; fi"
rev-parse test: modernize quoting and whitespace
When --shallow-file is added to the command line, it has to be
before the subcommand name, the first argument won't be the command
name any more. Stop assuming that and keep track of the command name
explicitly.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike other git commands which work correctly at the top-level or in a
subdirectory, git-contacts fails when invoked in a subdirectory. This is
because it invokes git-blame with pathnames relative to the top-level,
but git-blame interprets the pathnames as relative to the current
directory. Fix this.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove now disused remote-helpers framework for helpers written in
Python.
* jk/remove-remote-helpers-in-python:
git_remote_helpers: remove little used Python library
When we converted many documents that were traditionally text-only
to be formatted to AsciiDoc, we did not update links that point at
them to refer to the formatted HTML files.
* ss/doclinks:
Documentation: make AsciiDoc links always point to HTML files
We liberally use "committish" and "commit-ish" (and "treeish" and
"tree-ish"); as these are non-words, let's unify these terms to
their dashed form. More importantly, clarify the documentation on
object peeling using these terms.
* rh/ishes-doc:
glossary: fix and clarify the definition of 'ref'
revisions.txt: fix and clarify <rev>^{<type>}
glossary: more precise definition of tree-ish (a.k.a. treeish)
use 'commit-ish' instead of 'committish'
use 'tree-ish' instead of 'treeish'
glossary: define commit-ish (a.k.a. committish)
glossary: mention 'treeish' as an alternative to 'tree-ish'
When the user types "git diff" outside a working tree, thinking he
is inside one, the current error message that is a single-liner
"usage: git diff --no-index <path> <path>" may not be sufficient to
make him realize the mistake. Add "Not a git repository" to the
error message when we fell into the "--no-index" mode without an
explicit command line option to instruct us to do so.
* dw/diff-no-index-doc:
diff --no-index: describe in a separate paragraph
diff --no-index: clarify operation when not inside a repository
Update the user's manual to more recent versions of Git.
* ta/user-manual:
"git prune" is safe
Remove irrelevant reference from "Tying it all together"
Remove unnecessary historical note from "Object storage format"
Improve section "Merging multiple trees"
Improve section "Manipulating branches"
Simplify "How to make a commit"
Fix some typos and improve wording
Use "git merge" instead of "git pull ."
Use current output for "git repack"
Use current "detached HEAD" message
Call it "Git User Manual" and remove reference to very old Git version
When an object is not found after checking the packfiles and then
loose object directory, read_sha1_file() re-checks the packfiles to
prevent racing with a concurrent repacker; teach the same logic to
has_sha1_file().
* jk/has-sha1-file-retry-packed:
has_sha1_file: re-check pack directory before giving up
Earlier we started rejecting an attempt to add 0{40} object name to
the index and to tree objects, but it sometimes is necessary to
allow so to be able to use tools like filter-branch to correct such
broken tree objects.
* jk/write-broken-index-with-nul-sha1:
write_index: optionally allow broken null sha1s
Finishing touches to update the document to adjust to a new option
"git clean" learned recently.
* jx/clean-interactive:
documentation: clarify notes for clean.requireForce
