* lt/rev-list:
Rip out merge-order and make "git log <paths>..." work again.
Tie it all together: "git log"
Introduce trivial new pager.c helper infrastructure
git-rev-list libification: rev-list walking
blame.c #include's epoch.h; it needed to be killed.
Well, assuming breaking --merge-order is fine, here's a patch (on top of
the other ones) that makes
git log <filename>
actually work, as far as I can tell.
I didn't add the logic for --before/--after flags, but that should be
pretty trivial, and is independent of this anyway.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Conflicts:
Documentation/git-cvsserver.txt
git-cvsserver.perl
Originally Martin's tree was based on "next", which meant that all
the other things that I am not ready to push out to "master" were
contained in it. His changes looked good, and I wanted to have them
in "master".
So, here is what I did:
- fetch Martin's tree into a temporary topic branch.
$ git fetch $URL $remote:ml/cvsserver
$ git checkout ml/cvsserver
- rebase it on top of "master".
$ git rebase --onto master next
- pull that master into "next", recording Martin's head as well.
$ git pull --append . master
Since I have apply.whitespace=strip in my configuration file, the
rebased cvsserver changes have trailing whitespaces introduced by
Martin's tree cleansed out. Hence the above conflicts.
The reason I made this octopus is to make sure that next time Martin
pulls from my "next" branch, it results in a fast forward. There is
no reason to force him do the same conflict resolution I did with this
merge.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is to rework diffcore break/rename/copy detection code
so that it does not affected when deltifier code gets improved.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is what the previous diffs all built up to.
We can do "git log" as a trivial small helper function inside git.c,
because the infrastructure is all there for us to use as a library.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This introduces the new function
void setup_pager(void);
to set up output to be written through a pager applocation.
All in preparation for doing the simple scripts in C.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When on Darwin platforms don't include Fink or DarwinPorts
into the link path unless the related library directory
is actually present. The linker on MacOS 10.4 complains
if it is given a directory which does not exist.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* lt/rev-list:
First cut at libifying revlist generation
Merge branch 'maint'
sample hooks template.
Teach the "git" command to handle some commands internally
Use setenv(), fix warnings
contrib/git-svn: version 0.10.0
contrib/git-svn: optimize sequential commits to svn
contrib/git-svn: add show-ignore command
annotate: Use qx{} for pipes on activestate.
annotate: Convert all -| calls to use a helper open_pipe().
annotate: Handle dirty state and arbitrary revisions.
git-fetch: print the new and old ref when fast-forwarding
This really just splits things up partially, and creates the
interface to set things up by parsing the command line.
No real code changes so far, although the parsing of filenames is a bit
stricter. In particular, if there is a "--", then we do not accept any
filenames before it, and if there isn't any "--", then we check that _all_
paths listed are valid, not just the first one.
The new argument parsing automatically also gives us "--default" and
"--not" handling as in git-rev-parse.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* master:
Merge branches 'jc/rev-list' and 'jc/pack-thin'
gitview: Code cleanup
Add missing programs to ignore list
git ls files recursively show ignored files
Build and install git-mailinfo.
gitview: Bump the rev
gitview: Fix DeprecationWarning
The merge 712b1dd389 was done
incorrectly, and lost this program from Makefile.
Big thanks go to Tony Luck for noticing it, and Linus for
diagnosing it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds a git-rm command which provides convenience similar to
git-add, (and a bit more since it takes care of the rm as well if
given -f).
Like git-add, git-rm expands the given path names through
git-ls-files. This means it only acts on files listed in the
index. And it does act recursively on directories by default, (no -r
needed as in the case of rm itself). When it recurses, it does not
remove empty directories that are left behind.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-cvsserver is highly functional. However, not all methods are implemented,
and for those methods that are implemented, not all switches are implemented.
All the common read operations are implemented, and add/remove/commit are
supported.
Testing has been done using both the CLI CVS client, and the Eclipse CVS
plugin. Most functionality works fine with both of these clients.
Currently git-cvsserver only works over SSH connections, see the
Documentation for more details on how to configure your client. It
does not support pserver for anonymous access but it should not be
hard to implement. Anonymous access will need tighter input validation.
In our very informal tests, it seems to be significantly faster than a real
CVS server.
This utility depends on a version of git-cvsannotate that supports -S and on
DBD::SQLite.
Licensed under GPLv2. Copyright The Open University UK.
Authors: Martyn Smith <martyn@catalyst.net.nz>
Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In my attempt to port git to IRIX, I broke it. Sorry.
Signed-off-by: Johannes E. Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
- Solaris 9 and up do not need -liconv, so NEEDS_LIBICONV should be set
only for S8.
- Move the declaration of the uname variables to early in the Makefile
so they can be referenced by prefix and gitexecdir variables.
- gitexecdir defaults to being same as bindir, it might as well reference
that variable.
[jc: corrupt patch, sneakily tried to remove inclusion of GIT-VERSION-FILE
I do not know why I am applying this...]
Signed-off-by: Paul Jakma <paul@quagga.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I have also been working on a blame program. The algorithm is pretty
much the one described by Junio in his blame.perl. My variant doesn't
handle renames, but it shouldn't be too hard to add that. The output
is minimal, just the line number followed by the commit SHA1.
An interesting observation is that the output from my git-blame and
your git-annotate doesn't match on all files in the git
repository. One example where several lines differ is read-cache.c. I
haven't investigated it further to find out which one is correct.
The code should be considered as a work in progress. It certainly has
a couple of rough edges. The output looks fairly sane on the few files
I have tested it on, but it wouldn't be too surprising if it gets some
cases wrong.
[jc: adding it to pu for wider comments. I did minimum
whitespace fixups but it still needs an indent run and
-Wdeclaration-after-statement fixups.]
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This reads data in the format a (non recursive) ls-tree outputs
and writes a tree object to the object database. The created
tree object name is output to the standard output.
For convenience, the input data does not need to be sorted; the
command sorts the input lines internally.
By request from Tommi Virtanen.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* ra/anno:
Add git-annotate, a tool for assigning blame.
git-svn: 0.9.1: add --version and copyright/license (GPL v2+) information
contrib/git-svn: add Makefile, test, and associated ignores
git-svn: fix several corner-case and rare bugs with 'commit'
contrib/git-svn.txt: add a note about renamed/copied directory support
git-svn: change ; to && in addremove()
git-svn: remove any need for the XML::Simple dependency
git-svn: Allow for more argument types for commit (from..to)
git-svn: allow --find-copies-harder and -l<num> to be passed on commit
git-svn: fix a typo in defining the --no-stop-on-copy option
Do not even test for subprocess (trying to execute python).
Signed-off-by: Johannes E. Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some versions of GNU make do not understand $(call), and have problems to
interpret rules like this:
some_target: CFLAGS += -Dsome=defs
[jc: simplified substitution a bit. ]
Signed-off-by: Johannes E. Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In some setups (notably server setups) you do not need that dependency.
Gracefully handle the absence of python when NO_PYTHON is defined.
Signed-off-by: Johannes E. Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* js/portable:
Support Irix
Optionally support old diffs
Fix cpio call
SubmittingPatches: note on whitespaces
Add a README for gitview
Add contrib/README.
git-tag: -l to list tags (usability).
Some versions of diff do not correctly detect a missing new-line at the end
of the file under certain circumstances.
When defining NO_ACCURATE_DIFF, work around this bug.
Signed-off-by: Johannes E. Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/pack-reuse:
git-repack: allow passing a couple of flags to pack-objects.
pack-objects: finishing touches.
pack-objects: reuse data from existing packs.
Add contrib/gitview from Aneesh.
git-svn: ensure fetch always works chronologically.
git-svn: fix revision order when XML::Simple is not loaded
Introducing contrib/git-svn.
Allow building Git in systems without iconv
Systems using some uClibc versions do not properly support
iconv stuff. This patch allows Git to be built on those
systems by passing NO_ICONV=YesPlease to make. The only
drawback is mailinfo won't do charset conversion in those
systems.
Signed-off-by: Fernando J. Pereda <ferdy@gentoo.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
On Tue, 14 Feb 2006, Junio C Hamano wrote:
> Linus Torvalds <torvalds@osdl.org> writes:
>
> > If somebody is interested in making the "lots of filename changes" case go
> > fast, I'd be more than happy to walk them through what they'd need to
> > change. I'm just not horribly motivated to do it myself. Hint, hint.
>
> In case anybody is wondering, I share the same feeling. I
> cannot say I'd be "more than happy to" clean up potential
> breakages during the development of such changes, but if the
> change eventually would help certain use cases, I can be
> persuaded to help debugging such a mess ;-).
Actually, I got interested in seeing how hard this is, and wrote a simple
first cut at doing a tree-optimized merger.
Let me shout a bit first:
THIS IS WORKING CODE, BUT BE CAREFUL: IT'S A TECHNOLOGY DEMONSTRATION
RATHER THAN THE FINAL PRODUCT!
With that out of the way, let me descibe what this does (and then describe
the missing parts).
This is basically a three-way merge that works entirely on the "tree"
level, rather than on the index. A lot of the _concepts_ are the same,
though, and if you're familiar with the results of an index merge, some of
the output will make more sense.
You give it three trees: the base tree (tree 0), and the two branches to
be merged (tree 1 and tree 2 respectively). It will then walk these three
trees, and resolve them as it goes along.
The interesting part is:
- it can resolve whole sub-directories in one go, without actually even
looking recursively at them. A whole subdirectory will resolve the same
way as any individual files will (although that may need some
modification, see later).
- if it has a "content conflict", for subdirectories that means "try to
do a recursive tree merge", while for non-subdirectories it's just a
content conflict and we'll output the stage 1/2/3 information.
- a successful merge will output a single stage 0 ("merged") entry,
potentially for a whole subdirectory.
- it outputs all the resolve information on stdout, so something like the
recursive resolver can pretty easily parse it all.
Now, the caveats:
- we probably need to be more careful about subdirectory resolves. The
trivial case (both branches have the exact same subdirectory) is a
trivial resolve, but the other cases ("branch1 matches base, branch2 is
different" probably can't be silently just resolved to the "branch2"
subdirectory state, since it might involve renames into - or out of -
that subdirectory)
- we do not track the current index file at all, so this does not do the
"check that index matches branch1" logic that the three-way merge in
git-read-tree does. The theory is that we'd do a full three-way merge
(ignoring the index and working directory), and then to update the
working tree, we'd do a two-way "git-read-tree branch1->result"
- I didn't actually make it do all the trivial resolve cases that
git-read-tree does. It's a technology demonstration.
Finally (a more serious caveat):
- doing things through stdout may end up being so expensive that we'd
need to do something else. In particular, it's likely that I should
not actually output the "merge results", but instead output a "merge
results as they _differ_ from branch1"
However, I think this patch is already interesting enough that people who
are interested in merging trees might want to look at it. Please keep in
mind that tech _demo_ part, and in particular, keep in mind the final
"serious caveat" part.
In many ways, the really _interesting_ part of a merge is not the result,
but how it _changes_ the branch we're merging into. That's particularly
important as it should hopefully also mean that the output size for any
reasonable case is minimal (and tracks what we actually need to do to the
current state to create the final result).
The code very much is organized so that doing the result as a "diff
against branch1" should be quite easy/possible. I was actually going to do
it, but I decided that it probably makes the output harder to read. I
dunno.
Anyway, let's think about this kind of approach.. Note how the code itself
is actually quite small and short, although it's prbably pretty "dense".
As an interesting test-case, I'd suggest this merge in the kernel:
git-merge-tree $(git-merge-base 4cbf876 7d2babc) 4cbf876 7d2babc
which resolves beautifully (there are no actual file-level conflicts), and
you can look at the output of that command to start thinking about what
it does.
The interesting part (perhaps) is that timing that command for me shows
that it takes all of 0.004 seconds.. (the git-merge-base thing takes
considerably more ;)
The point is, we _can_ do the actual merge part really really quickly.
Linus
PS. Final note: when I say that it is "WORKING CODE", that is obviously by
my standards. IOW, I tested it once and it gave reasonable results - so it
must be perfect.
Whether it works for anybody else, or indeed for any other test-case, is
not my problem ;)
Signed-off-by: Junio C Hamano <junkio@cox.net>
If Git is compiled with NO_CURL=YesPlease and one tries to
clone a http repository, git-clone tries to call the curl
binary. This trivial patch prints an error instead in such
situation.
Signed-off-by: Fernando J. Pereda <ferdy@gentoo.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With the current Makefile we don't use the shell chosen by the
platform specific defines when we invoke GIT-VERSION-GEN.
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This revamps the git-status command to take the same set of
parameters as git commit. It gives a preview of what is being
committed with that command. With -v flag, it shows the diff
output between the HEAD commit and the index that would be
committed if these flags were given to git-commit command.
git-commit also acquires -v flag (it used to mean "verify" but
that is the default anyway and there is --no-verify to turn it
off, so not much is lost), which uses the updated git-status -v
to seed the commit log buffer. This is handy for writing a log
message while reviewing the changes one last time.
Now, git-commit and git-status are internally share the same
implementation.
Unlike previous git-commit change, this uses a temporary index
to prepare the index file that would become the real index file
after a successful commit, and moves it to the real index file
once the commit is actually made. This makes it safer than the
previous scheme, which stashed away the original index file and
restored it after an aborted commit.
Signed-off-by: Junio C Hamano <junkio@cox.net>
In a workflow that employs relatively long lived topic branches,
the developer sometimes needs to resolve the same conflict over
and over again until the topic branches are done (either merged
to the "release" branch, or sent out and accepted upstream).
This commit introduces a new command, "git rerere", to help this
process by recording the conflicted automerge results and
corresponding hand-resolve results on the initial manual merge,
and later by noticing the same conflicted automerge and applying
the previously recorded hand resolution using three-way merge.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is essentially 'git whatchanged -n1 --always --cc "$@"'.
Just like whatchanged takes default flags from
whatchanged.difftree configuration, this uses show.difftree
configuration.
Signed-off-by: Junio C Hamano <junkio@cox.net>
A new option '-c' to diff-tree changes the way a merge commit is
displayed when generating a patch output. It shows a "combined
diff" (hence the option letter 'c'), which looks like this:
$ git-diff-tree --pretty -c -p fec9ebf1 | head -n 18
diff-tree fec9ebf... (from parents)
Merge: 0620db3... 8a263ae...
Author: Junio C Hamano <junkio@cox.net>
Date: Sun Jan 15 22:25:35 2006 -0800
Merge fixes up to GIT 1.1.3
diff --combined describe.c
@@@ +98,7 @@@
return (a_date > b_date) ? -1 : (a_date == b_date) ? 0 : 1;
}
- static void describe(char *arg)
- static void describe(struct commit *cmit, int last_one)
++ static void describe(char *arg, int last_one)
{
+ unsigned char sha1[20];
+ struct commit *cmit;
There are a few things to note about this feature:
- The '-c' option implies '-p'. It also implies '-m' halfway
in the sense that "interesting" merges are shown, but not all
merges.
- When a blob matches one of the parents, we do not show a diff
for that path at all. For a merge commit, this option shows
paths with real file-level merge (aka "interesting things").
- As a concequence of the above, an "uninteresting" merge is
not shown at all. You can use '-m' in addition to '-c' to
show the commit log for such a merge, but there will be no
combined diff output.
- Unlike "gitk", the output is monochrome.
A '-' character in the nth column means the line is from the nth
parent and does not appear in the merge result (i.e. removed
from that parent's version).
A '+' character in the nth column means the line appears in the
merge result, and the nth parent does not have that line
(i.e. added by the merge itself or inherited from another
parent).
The above example output shows that the function signature was
changed from either parents (hence two "-" lines and a "++"
line), and "unsigned char sha1[20]", prefixed by a " +", was
inherited from the first parent.
The code as sent to the list was buggy in few corner cases,
which I have fixed since then.
It does not bother to keep track of and show the line numbers
from parent commits, which it probably should.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Needs iconv and third party lib/headers are inside /usr/local
Signed-off-by: Alecs King <alecsk@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
