The character sequences ->* and .* are valid C++ operators. Keep them
together in --word-diff mode.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many tests do something like:
(
mkdir foo &&
cd foo &&
git init
)
You can do the same these days with "git init foo", which
makes the tests shorter and simpler to read.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many tests use subshells, but don't actually change the
shell environment. They were probably cargo-culted from
earlier tests which did need subshells. Drop the useless
ones.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We've hand-rolled several "if" statements looking for
failures. We can use test_must_fail here, which is shorter
and more robust.
Note that we modify the commands slightly (to use "git init
foo" rather than "cd foo && git init") to avoid dealing with
a subshell, but this should not affect the outcome.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We hand-set several config options using :
git config -f $HOME/.gitconfig ...
Instead, we can use "test_config_global". Not only is this
more readable, but it cleans up for us so that subsequent
tests aren't polluted by our settings.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t0001 predates the test_path_is_* helpers, and uses "test
-f" and "test -d" directly. Using the helpers provides
better debugging output, and are a little more robust.
As opposed to "! test -d", test_path_is_missing will
actually makes sure the path does not exist at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the final test of t0001, we have a repo whose .git is a
symlink to a directory "here", and we use
"--separate-git-dir" to migrate that to a .git file pointing
to a different directory. We check that the data is migrated
to the new directory and that .git looks like a git-file.
We also check that "here" is not a directory, which is
slightly misleading. It should not be a directory, but
neither should it be gone. It is the actual resting place of
the git-file, and .git remains a symlink to it.
Let's check that more explicitly, both to make our test more
robust, and to make further cleanups in this area more
obvious.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Doing:
GIT_CONFIG=foo git config ...
is equivalent to:
git config --file=foo ...
The latter is easier to read and slightly less error-prone,
because of issues with one-shot variables and shell
functions (e.g., you cannot use the former with
test_must_fail).
Note that we explicitly leave one case in t1300 which checks
the same operation on both GIT_CONFIG and "git config
--file". They are equivalent in the code these days, but
this will make sure it remains so.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This lets us get rid of an extra "env" invocation in the
middle, and is slightly more readable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests want to check or set config in another
repository. E.g., t1000 creates repositories and makes sure
that their core.bare and core.worktree settings are what we
expect. We can do this with:
GIT_CONFIG=$repo/.git/config git config ...
but it better shows the intent to just enter the repository
and let "git config" do the normal lookups:
(cd $repo && git config ...)
In theory, this would cause us to use an extra subshell, but
in all such cases, we are actually already in a subshell.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Several test scripts manually unset GIT_CONFIG and other
GIT_* variables. These are generally taken care of for us by
test-lib.sh already.
Unsetting these is not only useless, but can be confusing to
a reader, who may wonder why some tests in a script unset
them and others do not (t0001 is particularly guilty of this
inconsistency, probably because many of its tests predate
the test-lib.sh environment-cleansing).
Note that we cannot always get rid of such unsetting. For
example, t9130 can drop the GIT_CONFIG unset, but not the
GIT_DIR one, because lib-git-svn.sh sets the latter. And in
t1000, we unset GIT_TEMPLATE_DIR, which is explicitly
initialized by test-lib.sh.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is already handled by the mass GIT_* unsetting added by
95a1d12 (tests: scrub environment of GIT_* variables,
2011-03-15).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Once upon a time, the setting of GIT_CONFIG in the
environment could affect how tests ran. Commit 9c3796f (Fix
setting config variables with an alternative GIT_CONFIG,
2006-06-20) unconditionally set GIT_CONFIG in the Makefile
when running tests to give us a known starting point.
This is insufficient for running the tests outside of the
Makefile, however, and 8565d2d (Make tests independent of
global config files, 2007-02-15) later set GIT_CONFIG
directly in test-lib.sh. At that point the Makefile setting
was redundant, but we never removed it. Let's do so now.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Discard the accumulated "heuristics" to guess from which branch the
result wants to be pulled from and make sure what the end user
specified is not second-guessed by "git request-pull", to avoid
mistakes.
* lt/request-pull:
request-pull: documentation updates
request-pull: resurrect "pretty refname" feature
request-pull: test updates
request-pull: pick up tag message as before
request-pull: allow "local:remote" to specify names on both ends
request-pull: more strictly match local/remote branches
Serving objects from a shallow repository needs to write a
temporary file to be used, but the serving upload-pack may not have
write access to the repository which is meant to be read-only.
Instead feed these temporary shallow bounds from the standard input
of pack-objects so that we do not have to use a temporary file.
* nd/upload-pack-shallow:
upload-pack: send shallow info over stdin to pack-objects
Unify the codepaths that format new/modified/changed sections and
conflicted paths in the "git status" output and make it possible to
properly internationalize their output.
* jn/wt-status:
wt-status: lift the artificual "at least 20 columns" floor
wt-status: i18n of section labels
wt-status: extract the code to compute width for labels
wt-status: make full label string to be subject to l10n
"stash pop", upon failing to apply the stash, refrains from
discarding the stash to avoid information loss. Be more explicit
in the error message.
The wording may want to get a bit more bikeshedding.
* jc/stash-pop-not-popped:
stash pop: mention we did not drop the stash upon failing to apply
Update implementation of skip_prefix() to scan only once; given
that most "prefix" arguments to the inline function are constant
strings whose strlen() can be determined at the compile time, this
might actually make things worse with a compiler with sufficient
intelligence.
* dk/skip-prefix-scan-only-once:
skip_prefix(): scan prefix only once
Serving objects from a shallow repository needs to write a
new file to hold the temporary shallow boundaries but it was not
cleaned when we exit due to die() or a signal.
* jk/shallow-update-fix:
shallow: verify shallow file after taking lock
shallow: automatically clean up shallow tempfiles
shallow: use stat_validity to check for up-to-date file
This hasn't been true since 2556b996 (status: disable display of '#'
comment prefix by default, 2013-09-06).
Signed-off-by: Dirk Wallenstein <halsmit@t-online.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since an earlier "Finally switch over tree descriptors to contain a
pre-parsed entry", we can safely access all tree_desc->entry fields
directly instead of first "extracting" them through
tree_entry_extract.
Use it. The code generated stays the same - only it now visually looks
cleaner.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We moved all action-taking code below show_path() in recent HEAD~~
(tree-diff: move all action-taking code out of compare_tree_entry).
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since previous commit, this function does not compare entry hashes, and
mode are compared fully outside of it. So what it does is compare entry
names and DIR bit in modes. Reflect this in its name.
Add documentation stating the semantics, and move the note about
files/dirs comparison to it.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- let it do only comparison.
This way the code is cleaner and more structured - cmp function only
compares, and the driver takes action based on comparison result.
There should be no change in performance, as effectively, we just move
if series from on place into another, and merge it to was-already-there
same switch/if, so the result is maybe a little bit faster.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It does, but we'll be reworking it in the next patch after it won't, and
besides it is better to stick to standard
strcmp/memcmp/base_name_compare/etc... convention, where comparison
function returns <0, =0, >0
Regarding performance, comparing for <0, =0, >0 should be a little bit
faster, than switch, because it is just 1 test-without-immediate
instruction and then up to 3 conditional branches, and in switch you
have up to 3 tests with immediate and up to 3 conditional branches.
No worry, that update_tree_entry(t2) is duplicated for =0 and >0 - it
will be good after we'll be adding support for multiparent walker and
will stay that way.
=0 case goes first, because it happens more often in real diffs - i.e.
paths are the same.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently both compare_tree_entry() and show_entry() invoke opt diff
callbacks (opt->add_remove() and opt->change()), and also they both have
code which decides whether to recurse into sub-tree, and whether to emit
a tree as separate entry if DIFF_OPT_TREE_IN_RECURSIVE is set.
I.e. we have code duplication and logic scattered on two places.
Let's consolidate it - all diff emiting code and recurion logic moves
to show_entry, which is now named as show_path, because it shows diff
for a path, based on up to two tree entries, with actual diff emitting
code being kept in new helper emit_diff() for clarity.
What we have as the result, is that compare_tree_entry is now free from
code with logic for diff generation, and also performance is not
affected as timings for
`git log --raw --no-abbrev --no-renames`
for navy.git and `linux.git v3.10..v3.11`, just like in previous patch,
stay the same.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This configuration variable sets the default for the --full-name option.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fsck_tree() has two different ways to set a flag variable, either by
using a if-statement that guards an assignment, or by using a
bitwise-or assignment operator. Most are done with the former, and
only one variable is assigned with the latter.
Since all the conditions are short-and-sweet, we can afford to
uniformly use the latter style, which makes the resulting code
shorter and easier to read.
Signed-off-by: Hiroyuki Sano <sh19910711@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
User config file location complies with the XDG base directory
specification while supporting the traditional $HOME/.gitk as a
fallback.
Signed-off-by: Astril Hayato <astrilhayato@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fsck_commit() uses memcmp() to check if the buffer starts with a
certain prefix, and skips the prefix if it does.
This is exactly what skip_prefix() was designed for.
Signed-off-by: Yuxuan Shui <yshuiv7@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On MINGW, "pwd" is defined as "pwd -W" in test-lib.sh. This usually is the
right thing, but the absolute Windows path with a colon confuses rsync. We
could use $PWD in this case to work around the issue, but in fact there is
no need to use an absolute path in the first place, so get rid of it.
This was discovered in the context of the mingwGitDevEnv project and only
did not surface before with msysgit because the latter does not ship
rsync.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ordinarily, we would say "VAR=VAL command" to execute a tested
command with environment variable(s) set only for that command.
This however does not work if 'command' is a shell function (most
notably 'test_must_fail'); the result of the assignment is retained
and affects later commands.
To avoid this, we used to assign and export environment variables
and run such a test in a subshell, like so:
(
VAR=VAL && export VAR &&
test_must_fail git command to be tested
)
But with "env" utility, we should be able to say:
test_must_fail env VAR=VAL git command to be tested
which is much shorter and easier to read.
Signed-off-by: David Tran <unsignedzero@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the next patch, we will replace a manual checking of "." or ".."
with a call to is_dot_or_dotdot() defined in dir.h. The private
function read_directory() defined in this file will conflict with
the global function declared there when we do so.
As a preparatory step, rename the private read_directory() to avoid
the name collision.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Brian Bourn <ba.bourn@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach rebase the same shorthand as checkout and merge to name the
branch to rebase the current branch on; that is, that "-" means "the
branch we were previously on".
Requested-by: Tim Chase <git@tim.thechases.com>
Signed-off-by: Brian Gesiak <modocache@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The version numbering scheme has changed since Git 1.9 and we
dropped the third dewey-decimal from the traditional numbering
(e.g. both 1.8.4 and 1.8.5 were major feature releases). This
release 1.9.1 is the first maintenance relase for Git 1.9.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clean -d pathspec" did not use the given pathspec correctly
and ended up cleaning too much.
* jk/clean-d-pathspec:
clean: simplify dir/not-dir logic
clean: respect pathspecs with "-d"
"git difftool" misbehaved when the repository is bound to the
working tree with the ".git file" mechanism, where a textual file
".git" tells us where it is.
* da/difftool-git-files:
t7800: add a difftool test for .git-files
difftool: support repositories with .git-files
"git push" did not pay attention to branch.*.pushremote if it is
defined earlier than remote.pushdefault; the order of these two
variables in the configuration file should not matter, but it did by
mistake.
* jk/remote-pushremote-config-reading:
remote: handle pushremote config in any order
Codepaths that parse timestamps in commit objects have been
tightened.
* jk/commit-dates-parsing-fix:
show_ident_date: fix tz range check
log: do not segfault on gmtime errors
log: handle integer overflow in timestamps
date: check date overflow against time_t
fsck: report integer overflow in author timestamps
t4212: test bogus timestamps with git-log
"git diff --external-diff" incorrectly fed the submodule directory
in the working tree to the external diff driver when it knew it is
the same as one of the versions being compared.
* tr/diff-submodule-no-reuse-worktree:
diff: do not reuse_worktree_file for submodules
"git reset" needs to refresh the index when working in a working
tree (it can also be used to match the index to the HEAD in an
otherwise bare repository), but it failed to set up the working
tree properly, causing GIT_WORK_TREE to be ignored.
* nd/reset-setup-worktree:
reset: optionally setup worktree and refresh index on --mixed
"git check-attr" when working on a repository with a working tree
did not work well when the working tree was specified via the
--work-tree (and obviously with --git-dir) option.
* jc/check-attr-honor-working-tree:
check-attr: move to the top of working tree when in non-bare repository
t0003: do not chdir the whole test process
