The matching step in commit 3235b7053c
did not properly account for users of the "rewriteRoot"
configuration parameter.
ref: <CANWsHyfHtr0EaJtNsDK9UTcmb_AbLg-1jUA-0uWJ-nEeNosb7w@mail.gmail.com>
Suggested-by: H Krishnan <hetchkay@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Adds a --preserve-empty-dirs flag to the clone operation that will detect
empty directories in the remote Subversion repository and create placeholder
files in the corresponding local Git directories. This allows "empty"
directories to exist in the history of a Git repository.
Also adds the --placeholder-file flag to control the name of any placeholder
files created. Default value is ".gitignore".
Signed-off-by: Ray Chen <rchen@cs.umd.edu>
Acked-by: Eric Wong <normalperson@yhbt.net>
If the bottom of a mergeinfo range is a commit that maps to a git root
commit, then it doesn't have a parent. In such a case, use git commit
range "$top_commit" rather than "$bottom_commit^..$top_commit".
[ew: line-wrap at 80 columns]
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Acked-by: Eric Wong <normalperson@yhbt.net>
Add "--" in the "git rev-list" command line so that if there is a bug
and the revisions cannot be found, the error message is a bit less
cryptic.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Acked-by: Eric Wong <normalperson@yhbt.net>
git svn log --show-commit had no tests and, consequently, no attention
by the author of
b1b4755 (git-log: put space after commit mark, 2011-03-10)
who kept git svn log working only without --show-commit.
Introduce a test and fix it.
Reported-by: Bernt Hansen <bernt@norang.ca>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running programs is not cheap!
Signed-off-by: James Y Knight <jknight@itasoftware.com>
Signed-off-by: Alejandro R. Sedeño <asedeno@mit.edu>
Acked-by: Eric Wong <normalperson@yhbt.net>
Similar to the 'remote.<name>.pushurl' config key for git remotes,
'pushurl' is designed to be used in cases where 'url' points to an SVN
repository via a read-only transport, to provide an alternate
read/write transport. It is assumed that both keys point to the same
repository.
The 'pushurl' key is distinct from the 'commiturl' key in that
'commiturl' is a full svn path while 'pushurl' (like 'url') is a base
path. 'commiturl' takes precendece over 'pushurl' in cases where
either might be used.
The 'pushurl' is used by git-svn's dcommit and branch commands.
Signed-off-by: Alejandro R. Sedeño <asedeno@mit.edu>
Reviewed-by: James Y Knight <jknight@itasoftware.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
"git svn mkdirs" (which creates empty directories in the current
working copy) can be very slow and is often unnecessary. Provide a
config file option "svn-remote.<name>.automkdirs" that prevents empty
directories from being created automatically. (They are still created
if "git svn mkdirs" is invoked explicitly.)
Based-on-patch-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, commit marks (left, right, boundary, cherry) are output right
before the commit sha1, which makes it difficult to copy sha1s. Sample
output for "git log --oneline --cherry":
=049c269 t6007: test rev-list --cherry
Change this to
= 049c269 t6007: test rev-list --cherry
which matches exactly the current output of "git log --graph".
Leave "git rev-list" output as is (no space) so that they do not break.
Adjust "git-svn" which uses "git log --pretty=raw --boundary".
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a first step towards preserving merges across dcommit, we need a
mechanism to update the svn:mergeinfo property.
[ew: fixed bashism and style issues in test case]
Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Formalize our dependency on perl 5.8, bumped from 5.6.[12]. We already
used the three-arg form of open() which was introduced in 5.6.1, but
t/t9700/test.pl explicitly depended on 5.6.2.
However git-add--interactive.pl has been failing on the 5.6 line since
it was introduced in v1.5.0-rc0~12^2~2 back in 2006 due to this open
syntax:
sub run_cmd_pipe {
my $fh = undef;
open($fh, '-|', @_) or die;
return <$fh>;
}
Which when executed dies on "Can't use an undefined value as
filehandle reference". Several of our tests also fail on 5.6 (even
more when compiled with NO_PERL_MAKEMAKER=1):
t2016-checkout-patch.sh
t3904-stash-patch.sh
t3701-add-interactive.sh
t7105-reset-patch.sh
t7501-commit.sh
t9700-perl-git.sh
Our code is bitrotting on 5.6 with no-one interested in fixing it, and
pinning us to such an ancient release of Perl is keeping us from using
useful features introduced in the 5.8 release.
The 5.6 series is now over 10 years old, and the 5.6.2 maintenance
release almost 7. 5.8 on the other hand is more than 8 years old.
All the modern Unix-like operating systems have now upgraded to it or
a later version, and 5.8 packages are available for old IRIX, AIX
Solaris and Tru64 systems.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Tor Arntsen <tor@spacetec.no>
Acked-by: Randal L. Schwartz <merlyn@stonehenge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function working_head_info() fails to parse commit hashes if they
are decorated (i.e. log.decorate is true), causing dcommit, rebase, and
other vital git-svn commands to malfunction.
This patch disables decorated log output with --no-decorate.
[ew: wrapped long line]
Signed-off-by: Mathias Lafeldt <misfire@debugon.org>
Acked-by: Eric Wong <normalperson@yhbt.net>
The merge-base between @$parents and $merge_tip may have been reached
through a merge commit. This means that some commits that are ancestors
of @$parents will not be ancestors of $merge_base. The mergeinfo
property will not list commits that are ancestors of @$parents, so we
need to explicitly exclude them.
[ew: squashed and cleaned up test case from Steven]
Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Currently git-svn assumes that two tags created from the same
revision will have the same repo url, so it uses a ref to the
tag without checking that its url matches the current url.
This causes issues when fetching an svn repo where a tag was
created, deleted, and then recreated under the following
circumstances:
- Both tags were copied from the same revision.
- Both tags had the same name.
- Both tags had different repository paths.
- [Optional] Both tags have a file with the same name but
different content.
When all four conditions are met, a checksum mismatch error
occurs because the content of two files with the same path
differs (see t/t9155--git-svn-fetch-deleted-tag.sh):
Checksum mismatch: ChangeLog 065854....
expected: ce771b....
got: 9563fd....
When only the first three conditions are met, no error occurs
but the tag in git matches the first (deleted) tag instead of
the last (most recent) tag (see
t/t9156-git-svn-fetch-deleted-tag-2.sh).
The fix is to verify that the repo url for the ref matches the
current url. If the urls do not match, then a "tail" is grown
on the tag name by appending a dash and rechecking the new ref's
repo url until either a matching repo url is found or a new tag
is created.
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Fix a regular expression used to remove the revision from the
end of an svn tag or branch name. The regex did not account for
any "tail" (dashes) that may have been added to the end of the
tag name (which first appeared in v1.4.1-rc2~11). If not fixed,
tags with names like "tags/mytag@5--@2" may be created.
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
This change allows git-svn to handle an URL with colons in the path
[ew: rewritten to use uri_decode() function]
Signed-off-by: Eric Wong <normalperson@yhbt.net>
The dcommit command fails if an otherwise unmodified file has
been touched in the working directory:
Cannot dcommit with a dirty index. Commit your changes
first, or stash them with `git stash'.
This happens because "git diff-index" reports a difference
between the index and the filesystem:
:100644 100644 d00491...... 000000...... M file
The fix is to run "git update-index --refresh" before
"git diff-index" as is done in git-rebase and
git-rebase--interactive before "git diff-files".
This changes dcommit to display a list of modified files before
exiting.
Also add a similar test case for "git svn rebase".
[ew: rearranged commit message subject]
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Introduce a new option 'svn.pathnameencoding' that instructs git svn to
recode pathnames to a given encoding. It can be used by windows users
and by those who work in non-utf8 locales to avoid corrupted file names
with non-ascii characters.
[rp: renamed the option and added manpage documentation]
Signed-off-by: Dmitry Statyvka <dstatyvka@tmsoft-ltd.kiev.ua>
Signed-off-by: Robert Pollak <robert.pollak@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Apparently using the Storable module during global destruction is
unsafe - there is a bug which can cause segmentation faults:
http://rt.cpan.org/Public/Bug/Display.html?id=36087http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=482355
The persistent memoization support introduced in commit 8bff7c538
relied on global destruction to write cached data, which was leading
to segfaults in some Perl configurations. Calling Memoize::unmemoize
in the END block forces the cache writeout to be performed earlier,
thus avoiding the bug.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Acked-by: Eric Wong <normalperson@yhbt.net>
svn:// servers are more picky regarding redundant slashes
than file:// and http(s)://-backed respositories. Since
the last commit, we avoid putting unnecessary slashes in
$GIT_CONFIG, but this doesn't help users who are already
set up that way.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
The following command
git svn clone \
-r9500:10006 \
svn://svn.debian.org/svn/pkg-games/packages \
--trunk=/trunk/freedoom \
--branches=/branches/freedoom \
--tags=/tags/freedoom \
freedoom.git.2009091
produces strange results:
With v1.6.3.3 (and perhaps earlier versions), this would fetch up to
and including r9978 (the last revision of the no_iwad_alternatives
branch before it was deleted), check it out, and prematurely declare
success, leaving out some commits to the trunk (r9984, r9985, r10006)
from after the branch was merged.
With v1.6.5-rc0~74 (svn: allow branches outside of refs/remotes,
2009-08-11) and later, this fetches up to and including r9978 and then
attempts a post-fetch checkout and fails.
r9978 = 25f0920175c395f0f22f54ae7a2318147f745274
(refs/remotes/no_iwad_alternatives)
fatal: refs/remotes/trunk: not a valid SHA1
update-ref refs/heads/master refs/remotes/trunk: command returned error: 128
Checking .git/config reveals
fetch = packages//trunk/freedoom:refs/remotes/trunk
And with both 1.6.3.3 and 1.7.1, using --trunk=trunk/freedom without
the leading slash (/) works fine.
Moral: git-svn needs to scrub an initial / from $_trunk and related
arguments it receives. Make it so.
Reported-by: Jon Dowland <jmtd@debian.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Avoid attempts to stat() the contents of '', which could happen
when the root directory is empty. Additionally, remove the
unnecessary '_' stat optimization since it was confusing and
possibly throwing off the non-existent case.
[ew: fixed indentation, rewrote commit message]
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Michael J. Kiwala <mkiwala@genome.wustl.edu>
git-check-ref-format(1) describes names which
cannot be used as refnames for git. Some are
legal branchnames in subversion however.
Mangle the not yet handled cases.
Signed-off-by: Torsten Schmutzler <git-ts@theblacksun.eu>
Acked-by: Eric Wong <normalperson@yhbt.net>
The use line was added in ffe256f9. File::Temp calls were later moved
to Git.pm in 0b19138b, but that commit neglected to remove the
now-redundant import.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
When "git svn reset" is called with an invalid revision, we
bail out and show the user a proper error message instead
of giving them a cryptic one related to git-svn internals.
ref: http://bugs.debian.org/578908
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Reported-by: Jens Seidel <jensseidel@users.sf.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Detecting of merges from svn:mergeinfo or svk merge tickets failed
with rewrite-root option. This fixes it.
Signed-off-by: Tuomas Suutari <tuomas.suutari@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
by requesting SVN::Core which is needed for the svn version.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
git-svn rebase used to have issues with CRLF conversion. Since these issues
have been fixed, we can safely revert the work-around that disables CRLF
conversion.
This reverts commit d3c9634eac.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
The delayed loading of SVN missed a place where SVN::Core is used. Make
sure to load the package before trying to use it.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
git-svn reads passwords from an interactive terminal.
This behavior cause GUIs to hang waiting for git-svn to
complete
Fix this problem by allowing a password-retrieving command
to be specified in GIT_ASKPASS. SSH_ASKPASS is supported
as a fallback when GIT_ASKPASS is not provided.
Signed-off-by: Frank Li <lznuaa@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/maint-fix-pager:
tests: Fix race condition in t7006-pager
t7006-pager: if stdout is not a terminal, make a new one
tests: Add tests for automatic use of pager
am: Fix launching of pager
git svn: Fix launching of pager
git.1: Clarify the behavior of the --paginate option
Make 'git var GIT_PAGER' always print the configured pager
Fix 'git var' usage synopsis
Importing functions from a .dll into Git for Windows' perl is pretty slow,
so let's avoid importing if it is not necessary.
This seems particularly slow in virtualized enviroments. Before this
change (on my machine):
$ time perl /libexec/git-core/git-svn rebase
Current branch master is up to date.
real 2m56.750s
user 0m3.129s
sys 2m39.232s
Afterwards:
$ time perl /libexec/git-core/git-svn rebase
Current branch master is up to date.
real 0m33.407s
user 0m1.409s
sys 0m23.054s
git svn rebase -n goes from 3m7.046s to 0m10.312s.
Signed-off-by: Josh Robb <josh_robb@fastmail.fm>
Acked-by: Eric Wong <normalperson@yhbt.net>
If parent J is an ancestor of parent I, then parent J should be
discarded, not I.
Note that J is an ancestor of I if and only if rev-list I..J is emtpy,
which is what we are testing here.
Signed-off-by: Tuomas Suutari <tuomas.suutari@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
In commit dec543e (am -i, git-svn: use "git var GIT_PAGER"), I tried
to teach git svn to defer to git var on what pager to use. In the
process, I introduced two bugs:
- The value set for $pager in config_pager has local scope, so
run_pager never sees it;
- git var cannot tell whether git svn’s output is going to a
terminal, so the value chosen for $pager does not reflect that
information.
Fix them.
Reported-by: Sebastian Celis <sebastian@sebastiancelis.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make memoization of the svn:mergeinfo processing functions persistent with
Memoize::Storable so that the memoization tables don't need to be regenerated
every time the user runs git-svn fetch.
The Memoize::Storable hashes are stored in ENV{GIT_DIR}/svn/.caches.
[ew: changed caches path to avoid conflicts with old repos]
[ew: File::Path::{make_path => mkpath} for compatibility]
[ew: line-wrapped at 80 chars]
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Andrew Myrick <amyrick@apple.com>
In contrast to GIT_SSH, SVN_SSH requires quotes for paths that contain
spaces. As GIT_SSH will not work if it contains quotes, it is safe to
assume it never contains quotes. Also, adding quotes to SVN_SSH for paths
that do not contain spaces does no harm. So we always add quotes when
deriving SVN_SSH from GIT_SSH on msys.
This fixes msysGit issue 385, see
http://code.google.com/p/msysgit/issues/detail?id=385
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For very large projects it is useful to be able to clone a subset of the
upstream SVN repo's branches. Allow for this by letting the left-side of
the branches and tags glob specs contain a brace-delineated comma-separated
list of names. e.g.:
branches = branches/{red,green}/src:refs/remotes/branches/*
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
In certain situations it may be necessary to manually remap an svn
repostitory UUID. For example:
o--- [git-svn clone]
/
[origin svn repo]
\
o--- [svnsync clone]
Imagine that only "git-svn clone" and "svnsync clone" are made available
to external users. Furthur, "git-svn clone" contains only trunk, and for
reasons unknown, "svnsync clone" is missing the revision properties that
normally provide the origin svn repo's UUID.
A git user who has cloned the "git-svn clone" repo now wishes to use
git-svn to pull in the missing branches from the "synsync clone" repo.
In order for git-svn to get the history correct for those branches,
it needs to know the origin svn repo's UUID. Hence rewriteUUID.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Add ability to specify on the command line the username to perform the
operation as and the writable URL of the repository to perform it on.
[ew: shortened subject]
Signed-off-by: Igor Mironov <igor.a.mironov@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
When constructing a destination URL, use the property 'commiturl' if it
is specified in the configuration file; otherwise take 'url' as usual.
This accommodates the scenario where a user only wants to involve the
writable repository in operations performing a commit and defaults
everything else to a read-only URL.
[ew: shortened subject]
Signed-off-by: Igor Mironov <igor.a.mironov@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Change git-svn to warn and continue when merge-base fails while processing svn
merge tickets.
merge-base can fail when a partial branch is created and merged back to trunk
in svn, because it cannot find a common ancestor between the partial branch and
trunk.
Signed-off-by: Andrew Myrick <amyrick@apple.com>
Acked-by: Sam Vilain <sam@vilain.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Update git-svn to ignore commits that do not change the tree when it is
deciding if an svn merge ticket represents a real branch merge or just a
cherry-pick.
Consider the following integration model in the svn repository:
F---G branch1
/ \
D tag1 \ E tag2
/ \ /
A---B C trunk
branch1 is merged to trunk in commit C.
With this patch, git-svn will correctly identify branch1 as a proper merge
parent, instead of incorrectly ignoring it as a cherry-pick.
Signed-off-by: Andrew Myrick <amyrick@apple.com>
Acked-by: Sam Vilain <sam@vilain.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
svn+ssh:// repositories often have userinfo embedded in the URL
which were stripped out of the "git-svn-id:" trailers. Since
the SVN::Client::copy function takes userinfo into account when
matching URLs for SVN repositories, we need to retrieve the full
URL with embedded userinfo in it to avoid mismatched URLs.
Tested-by: Florian Köberle <florian@fkoeberle.de>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This appears to be a trivial case where array indices were being
passed to git rev-list, instead of the contents stored in the
array itself.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Change git-svn not to impose a limit of 16 parents on a merge.
This limit in git-svn artificially prevents cloning svn repositories
that contain commits with more than 16 merge parents.
The limit was removed from builtin-commit-tree.c for git v1.6.0 in commit
ef98c5cafb, so there is no need to check for it
it in git-svn.
Signed-off-by: Andrew Myrick <amyrick@apple.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
The old function was incorrect; in some instances it marks a cherry picked
range as a merged branch (because of an incorrect assumption that
'rev-list COMMIT --not RANGE' would work). This is replaced with a
function which should detect them correctly, memoized to limit the expense
of dealing with branches with many cherry picks to one 'merge-base' call
per merge, per branch which used cherry picking.
Signed-off-by: Sam Vilain <sam@vilain.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
The old function would have to check all mentioned merge tips, every time
that the mergeinfo ticket changed. This involved 1-2 rev-list operation
for each listed mergeinfo line. If there are a lot of feature branches
being merged into a trunk, this makes for a very expensive operation for
detecting the new parents on every merge.
This new version first uses a single 'rev-list' to figure out which commit
ranges are already reachable from the parents. This is used to eliminate
the already merged branches from the list.
Signed-off-by: Sam Vilain <sam@vilain.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
SVN's list of commit ranges in mergeinfo tickets is inclusive, whereas
git commit ranges are exclusive on the left hand side. Also, the end
points of the commit ranges may not exist; they simply delineate
ranges of commits which may or may not exist. Fix these two mistakes.
Signed-off-by: Sam Vilain <sam@vilain.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Each time the svn mergeinfo ticket changes, we look it up in the rev_map;
when there are a lot of merged branches, this will result in many repeated
lookups of the same information for subsequent commits. Arrange the slow
part of the function so that it may be memoized, and memoize it. The more
expensive revision walking operation can be memoized separately.
[ew: changed "next" to "return" for function exit]
Signed-off-by: Sam Vilain <sam@vilain.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
When using the -r/--revision argument to fetch deleted history,
calling SVN::Ra::get_log() from an SVN::Ra object initialized
to track the deleted URL will fail.
This regression was introduced in:
commit 4aacaeb3dc
"fix shallow clone when upstream revision is too new"
We now ignore errors from SVN::Ra::get_log() here because using
--revision will always override the value of $head here if
(and only if) we're tracking deleted directories.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
The "git svn gc" command creates and appends to unhandled.log.gz
files which should be parsed before the uncompressed
unhandled.log files.
Reported-by: Robert Zeh
Signed-off-by: Eric Wong <normalperson@yhbt.net>
If a clone errors out because of a missing author, or user interrupt,
this allows `git svn fetch` to resume seamlessly, rather than forcing
the user to re-provide the path to the authors file.
[ew: shortened subject]
Signed-off-by: Alex Vandiver <alex@chmrr.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
If --authors-file is passed a relative path, cloning will work, but
future `git svn fetch`es will fail to locate the authors file
correctly. Thus, use File::Spec->rel2abs to determine an absolute
path for the authors file before setting it.
Signed-off-by: Alex Vandiver <alex@chmrr.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
This also adds a test case for:
"git svn: Don't create empty directories whose parents were deleted"
which was the reason we found this bug in the first place.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Commit 6111b93 "git svn: attempt to create empty dirs on clone+rebase"
will create empty directories 'a/b' and 'a/c' if they were previously
created in SVN, even if their parent directory 'a' was deleted.
For example, unhandled.log may contain lines like this:
r32
+empty_dir: packages/sipb-xen-remctl-auto/sipb-xen-remctl-auto/files/etc/remctl/sipb-xen-auto/acl
+empty_dir: packages/sipb-xen-remctl-auto/sipb-xen-remctl-auto/files/etc/remctl/sipb-xen-auto/machine.d
+empty_dir: packages/sipb-xen-remctl-auto/sipb-xen-remctl-auto/files/etc/remctl/sipb-xen-auto/moira-acl
[...]
r314
-empty_dir: packages/sipb-xen-remctl-auto
[ew: rewrote to be line-wrapped at <= 80-columns]
Reported-by: Evan Broder <broder@mit.edu>
Signed-off-by: Greg Price <price@ksplice.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
When merging branches based on svk:merge properties, a single merge
can have updated or added multiple svk:merge lines. Attempt to
include the minimal set of parents by sorting the merge properties in
order of revision, highest to lowest.
Signed-off-by: Alex Vandiver <alex@chmrr.net>
Acked-by: Sam Vilain <sam@vilain.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Since unhandled.log stores paths relative to the repository
root, we need to strip out leading path components if the
directories we're tracking are not the repository root.
Reported-by: Björn Steinbrink
Signed-off-by: Eric Wong <normalperson@yhbt.net>
The internal no_reuse_existing flag is set to allow initializing
multiple remotes with the same URL, common with SVM users.
Unfortunately, this flag caused misbehavior when used
with the -R command-line flag for fetching.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
* jn/editor-pager:
Provide a build time default-pager setting
Provide a build time default-editor setting
am -i, git-svn: use "git var GIT_PAGER"
add -i, send-email, svn, p4, etc: use "git var GIT_EDITOR"
Teach git var about GIT_PAGER
Teach git var about GIT_EDITOR
Suppress warnings from "git var -l"
Do not use VISUAL editor on dumb terminals
Handle more shell metacharacters in editor names
We parse unhandled.log files for empty_dir statements and make a
best effort attempt to recreate empty directories on fresh
clones and rebase. This should cover the majority of cases
where users work off a single branch or for projects where
branches do not differ in empty directories.
Since this cannot affect "normal" git commands like "checkout"
or "reset", so users switching between branches in a single
working directory should use the new "git svn mkdirs" command
after switching branches.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Since $GIT_DIR does not exist when initializing new repositories,
we can follow back to the global and system config files for
git.
The logic for this was originally introduced when
$GIT_DIR/config was the only config file git could read (back
when "git config" was "git repo-config"), so the function is
renamed to "read_git_config" instead of "read_repo_config".
Signed-off-by: Eric Wong <normalperson@yhbt.net>
When recording the revisions that it has merged, SVN sets the top
revision to be the latest revision in the repository, which is not
necessarily a revision on the branch that is being merged from. When
it is not on the branch, git-svn fails to add the extra parent to
represent the merge because it relies on finding the commit on the
branch that corresponds to the top of the SVN merge range.
In order to correctly handle this case, we look for the maximum
revision less than or equal to the top of the SVN merge range that is
actually on the branch being merged from.
[ew: This includes the following (squashed) commit to prevent
errors during bisect:]
Author: Toby Allsopp <toby.allsopp@navman.co.nz>
Date: Fri Nov 13 09:48:39 2009 +1300
git-svn: add (failing) test for SVN 1.5+ merge with intervening commit
This test exposes a bug in git-svn's handling of SVN 1.5+ mergeinfo
properties. The problematic case is when there is some commit on an
unrelated branch after the last commit on the merged-from branch.
When SVN records the mergeinfo property, it records the latest
revision in the whole repository, which, in the problematic case, is
not on the branch it is merging from.
To trigger the git-svn bug, we modify t9151 to include two SVN merges,
the second of which has an intervening commit. The SVN dump was
generated using SVN 1.6.6 (on Debian squeeze amd64).
Signed-off-by: Toby Allsopp <toby.allsopp@navman.co.nz>
Acked-by: Eric Wong <normalperson@yhbt.net>
Use the new "git var GIT_PAGER" command to ask what pager to use.
Without this change, the core.pager configuration is ignored by
these commands.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the new "git var GIT_EDITOR" feature to decide what editor to
use, instead of duplicating its logic elsewhere. This should make
the behavior of commands in edge cases (e.g., editor names with
spaces) a little more consistent.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This feature is long overdue; convert SVN's merge representation to git's
as revisions are imported. This works by converting the list of revisions
in each line of the svn:mergeinfo into git revision ranges, and then
checking the latest of each of these revision ranges for A) being new and
B) now being completely merged.
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Acked-by: Eric Wong <normalperson@yhbt.net>
SVK is a simple case to start with, as its idea of merge parents
matches git's one. When a svk:merge ticket is encountered, check each
of the listed merged revisions to see if they are in the history of
this commit; if not, then we have encountered a merge - record it.
[ew: minor formatting cleanups]
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Acked-by: Eric Wong <normalperson@yhbt.net>
In cases where the top-level URL we're tracking is the path we
glob against, we can once again track odd repositories that keep
branches/tags at the top level. This regression was introduced
in commit 6f5748e14c.
Thanks to Daniel Cordero for the original bug report and
bisection.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
After doing a rebase, git-svn checks that the SVN URL
is what it expects. However, it does not account for
rewriteRoot, which is a legitimate way for the URL
to change. This produces a lot of spurious errors.
[ew: fixed line wrapping]
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Previously, the call to authors-prog was not properly escaped, so any
special characters in the Subversion username, such as spaces and
semi-colons, would be interpreted by the shell rather than being passed
in as the first argument. Now all unsafe characters are escaped using
"git rev-parse --sq-quote"
[ew: switched from "\Q..\E" to "rev-parse --sq-quote"]
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If SVN_SSH is defined, it will be used. Else value in
GIT_SSH is copied to SVN_SSH & then, only on Windows,
the \s are escaped.
On Windows, the shell-variables must be set as follows
GIT_SSH="C:\Program Files\PuTTY\plink.exe"
SVN_SSH="C:\\Program Files\\PuTTY\\plink.exe"
See http://code.google.com/p/msysgit/issues/detail?id=305
[ew: fixed indentation to use tabs]
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Karthik Rajagopalan <karthikr@fastmail.fm>
And then unescape them when writing to $GIT_CONFIG.
SVN has different rules for repository URLs (usually the root)
and for paths within that repository (below the HTTP layer).
Thus, for the request URI path at the HTTP level, the URI needs
to be encoded. However, in the body of the HTTP request (the
with underlying SVN XML protocol), those paths should not be
URI-encoded[1]. For non-HTTP(S) requests, SVN appears to be
more flexible and will except weird characters in the URL as
well as URI-encoded ones.
Since users are used to using URLs being entirely URI-encoded,
git svn will now attempt to unescape the path portion of URLs
while leaving the actual repository URL untouched.
This change will be reflected in newly-created $GIT_CONFIG files
only. This allows users to switch between svn(+ssh)://, file://
and http(s):// urls without changing the fetch/branches/tags
config keys. This won't affect existing imports at all (since
things didn't work before this commit anyways), and will allow
users to force escaping into repository paths that look like
they're escaped (but are not).
Thanks to Mike Smullin for the original bug report and Björn
Steinbrink for summarizing it into testable cases for me.
[1] Except when committing copies/renames, see
commit 29633bb91c
Signed-off-by: Eric Wong <normalperson@yhbt.net>
It may be convenient for some users to store svn remote tracking
branches outside of the refs/remotes/ heirarchy.
To accomplish this feat, this patch includes the entire path to
the ref in $r->{'refname'} in &read_all_remotes and tries to change
references to this entry so the new value makes sense.
[ew: fixed backwards compatibility, long lines]
Signed-off-by: Adam Brewster <adambrewster@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Since "trunk" is a convention for the main development branch in
the SVN world, try to make that the master branch upon initial
checkout if it exists. This is probably less surprising based
on user requests.
t9135 was the only test which relied on the previous behavior
and thus needed to be modified.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Subversion ignores all blank lines in svn:ignore properties. The old
git-svn code ignored blank lines everywhere except for the first line
of the svn:ignore property. This patch makes the "git svn
show-ignore" and "git svn create-ignore" commands ignore leading blank
lines, too.
Also include leading blank lines in the test suite.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Acked-by: Eric Wong <normalperson@yhbt.net>
Most users who type
git svn init file:///tmp/repo --prefix=my-svn/
would expect the root of the svn repository to be tracked by
refs/remotes/my-svn/git-svn.
Acked-by: Eric Wong <normalperson@yhbt.net>
In addition to path-based restrictions, Subversion servers over
http(s) may have access controls implemented via the LimitExcept
directive in Apache. In some cases, LimitExcept may be
(arguably) misconfigured to not allow REPORT requests while
allowing OPTIONS and PROPFIND.
This caused problems with our existing minimize_url logic that
only issued OPTIONS and PROPFIND requests when connecting and
using SVN::Ra::get_latest_revnum. We now call SVN::Ra::get_log
if get_latest_revnum succeeds, resulting in a REPORT request
being sent. This will increase our chances of tripping access
controls before we start attempting to fetch history.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Timothy Schaeffer reported the following:
> Git-svn has been giving me the following error for some time
> when calling "git svn dcommit":
>
> RA layer request failed: PROPFIND request failed on
> '/svn/stf/branches/dev/sw%2Fdpemu%2Finclude%2FNetCnxn.h': PROPFIND of
> '/svn/stf/branches/dev/sw%2Fdpemu%2Finclude%2FNetCnxn.h': 302 Found
> (https://oursvnrepo.net) at /usr/local/libexec/git-core/git-svn line 508
>
> This only occurred when git detected a rename or copy.
>
> Following the lead into git-svn.perl,
> and noticing that some of the '/'s in the path were hex-encoded
> and some were not,
> I changed the regex used to find chars
> to hex-encode in the relative part of the path
> to exclude '/'.
> It works, so far.
> I have included a patch.
While this has previous not been a problem in my experience,
newer versions of SVN may be stricter and this does not
introduce regressions in t9115.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This was introduced in 0b2af457a4
("Fix branch detection when repository root is inaccessible")
but reintroduced in the previous commit.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This reverts the --minimize-url behavior change that
appeared recently in commit 0b2af457a4
("Fix branch detection when repository root is inaccessible").
However, we now allow the option to be turned off by allowing
"--no-minimize-url" so people with limited-access setups can
still take advantage of the fix in
0b2af457a4.
Also document the behavior and default settings of minimize-url
in the manpage for the first time.
This introduces a temporary UI regression to allow t9141 to pass
that will be reverted (fixed) in the next commit.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Add a git svn gc command that gzips all unhandled.log files, and
removes all index files under .git/svn.
Signed-off-by: Robert Allan Zeh <robert.a.zeh@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Thanks to Ka-Hing Cheung for the initial bug report and patch:
> git-svn uses $ra->get_latest_revnum to find out the latest
> revision, but that can be problematic, because get_latest_revnum
> returns the latest revnum in the entire repository, not
> restricted by whatever URL you used to construct $ra. So if you
> do git svn clone -r HEAD svn://blah/blah/trunk, it won't work if
> the latest checkin is in one of the branches (it will try to
> fetch a rev that doesn't exist in trunk, making the clone
> useless).
Relying on SVN::Core::INVALID_REVNUM (-1) as the "start"
argument to SVN::Ra::get_log() proved unreliable with http(s)
URLs so the result of SVN::Ra::get_latest_revnum() is used as
the "start" argument instead.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Mishandling of http(s) in need of escaping was causing
t9118-git-svn-funky-branch-names to fail when SVN_HTTPD_PORT
was defined.
This bug was exposed in (but not caused by)
commit 0b2af457a4
(Fix branch detection when repository root is inaccessible)
Signed-off-by: Eric Wong <normalperson@yhbt.net>
SVN allows uppercase A-F characters in repositories. Although
`svnadmin' does not create UUIDs with uppercase by default, it
is possible to change the UUID of a SVN repository and SVN
itself will make no attempt to normalize them.
Thanks to Esben Skovenborg for discovering this issue.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
For the case of multiple projects sharing a single SVN repository, it is
common practice to create the standard SVN directory layout within a
subdirectory for each project. In such setups, access control is often
used to limit what projects a given user may access. git-svn failed to
detect branches (e.g. when passing --stdlayout to clone) because it
relied on having access to the root directory in the repository. This
patch solves this problem by making git-svn use paths relative to the
given repository URL instead of the repository root.
Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de>
Acked-by: Eric Wong <normalperson@yhbt.net>
This makes get_log more safe to use because callers cannot run into path
clobbering any more. The additional overhead will not affect performance
since the critical calls from the fetch loop need the path duplication
anyway and the rest of the call sites is not performance critical.
Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de>
Acked-by: Eric Wong <normalperson@yhbt.net>
Cloning/initializing svn repositories with an uncanonicalize url
does not work as libsvn throws an assertion. This patch
canonicalize svn uris for the clone and init command from
git-svn.
[ew: fixed trailing whitespace]
Signed-off-by: Ulrich Dangel <uli@spamt.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Marc Branchaud wrote:
> I'm fairly happy with this, except for the way the branch
> subcommand matches refspecs. The patch does a simple string
> comparison, but it'd be better to do an actual glob. I just
> couldn't track down the right function for that, so I left it as
> a strcmp and hope that a gitizen can tell me how to glob here.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This enables git-svn.perl to read multiple 'branches' and 'tags' entries in
svn-remote config sections. The init and clone subcommands also support
multiple --branches and --tags arguments.
The branch (and tag) subcommand gets a new argument: --destination (or -d).
This argument is required if there are multiple branches (or tags) entries
configured for the remote Subversion repository. The argument's value
specifies which branch (or tag) path to use to create the branch (or tag).
The specified value must match the left side (without wildcards) of one of
the branches (or tags) refspecs in the svn-remote's config.
[ew: avoided explicit loop when combining globs with "push"]
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Add a command to unwind the effects of fetch by moving the rev_map
and refs/remotes/git-svn back to an old SVN revision. This allows
revisions to be re-fetched. Ideally SVN revs would be immutable,
but permissions changes in the SVN repository or indiscriminate use
of '--ignore-paths' can create situations where fetch cannot make
progress.
Signed-off-by: Ben Jackson <ben@ben.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
By limiting start revision of find_rev_before to max existing
revision. This avoids a long wait if you do
'git svn reset -r 9999999'. The linear search within the
contiguous revisions doesn't seem to be a problem.
[ew: expanded commit message]
Signed-off-by: Ben Jackson <ben@ben.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Previously there was no explicit 'help' command, but 'git svn help'
still printed the usage message (as an invalid command), provided you
got past the initialization steps that required a valid repo.
Signed-off-by: Ben Jackson <ben@ben.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
'git svn dcommit' takes an optional revision argument, but the meaning
of it was rather scary. It completely ignored the current state of
the HEAD, only looking at the revisions between SVN and $rev. If HEAD
was attached to $branch, the branch lost all commits $rev..$branch in
the process.
Considering that 'git svn dcommit HEAD^' has the intuitive meaning
"dcommit all changes on my branch except the last one", we change the
meaning of the revision argument. git-svn temporarily checks out $rev
for its work, meaning that
* if a branch is specified, that branch (_not_ the HEAD) is rebased as
part of the dcommit,
* if some other revision is specified, as in the example, all work
happens on a detached HEAD and no branch is affected.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Eric Wong <normalperson@yhbt.net>
