The earlier change df391b192 to rename fsck-objects to fsck broke
fsck-objects. This should fix it again.
Signed-off-by: Mark Wooding <mdw@distorted.org.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/fsck-reflog:
Add git-reflog to .gitignore
reflog expire: do not punt on tags that point at non commits.
reflog expire: prune commits that are not incomplete
Don't crash during repack of a reflog with pruned commits.
git reflog expire
Move in_merge_bases() to commit.c
reflog: fix warning message.
Teach git-repack to preserve objects referred to by reflog entries.
Protect commits recorded in reflog from pruning.
add for_each_reflog_ent() iterator
The perl version used modules which are non-standard in some setups.
This patch brings the full power of rerere to a wider audience.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This prepares a place to collect reflog management subcommands,
and implements "expire" action.
$ git reflog expire --dry-run \
--expire=4.weeks \
--expire-unreachable=1.week \
refs/heads/master
The expiration uses two timestamps: --expire and --expire-unreachable.
Entries older than expire time (defaults to 90 days), and entries older
than expire-unreachable time (defaults to 30 days) and records a commit
that has been rewound and made unreachable from the current tip of the
ref are removed from the reflog.
The parameter handling is still rough, but I think the
core logic for expiration is already sound.
Signed-off-by: Junio C Hamano <junkio@cox.net>
merge-file has the same syntax as RCS merge, but supports only the
"-L" option.
For good measure, a test is added, which is quite minimal, though.
[jc: further fix for compliation errors included.]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
[jc: with minimum squelching of compiler warning under "-pedantic"
compilation options.]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Just make it take over blame's place. Documentation and command
have all stopped mentioning "git-pickaxe". The built-in synonym
is left in the command table, so you can still say "git pickaxe",
but it probably is a good idea to retire it as well.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* lj/refs: (63 commits)
Fix show-ref usagestring
t3200: git-branch testsuite update
sha1_name.c: avoid compilation warnings.
Make git-branch a builtin
ref-log: fix D/F conflict coming from deleted refs.
git-revert with conflicts to behave as git-merge with conflicts
core.logallrefupdates thinko-fix
git-pack-refs --all
core.logallrefupdates create new log file only for branch heads.
Remove bashism from t3210-pack-refs.sh
ref-log: allow ref@{count} syntax.
pack-refs: call fflush before fsync.
pack-refs: use lockfile as everybody else does.
git-fetch: do not look into $GIT_DIR/refs to see if a tag exists.
lock_ref_sha1_basic does not remove empty directories on BSD
Do not create tag leading directories since git update-ref does it.
Check that a tag exists using show-ref instead of looking for the ref file.
Use git-update-ref to delete a tag instead of rm()ing the ref file.
Fix refs.c;:repack_without_ref() clean-up path
Clean up "git-branch.sh" and add remove recursive dir test cases.
...
* jc/web-blame:
gitweb: spell "blame --porcelain" with -p
blame: Document and add help text for -f, -n, and -p
gitweb: blame porcelain: lineno and orig lineno swapped
Remove git-annotate.perl and create a builtin-alias for git-blame
gitweb: use blame --porcelain
git-blame --porcelain
blame.c: move code to output metainfo into a separate function.
git-blame: --show-number (and -n)
git-blame: --show-name (and -f)
blame.c: whitespace and formatting clean-up.
Gitweb - provide site headers and footers
gitweb: blame: Mouse-over commit-8 shows author and date
gitweb: blame: print commit-8 on the leading row of a commit-block
Revert 954a618375
gitweb: prepare for repositories with packed refs.
gitweb: make leftmost column of blame less cluttered.
This replaces git-branch.sh with builtin-branch.c
The changes is basically a patch from Kristian Hgsberg, updated
to apply onto current 'next'
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This replaces the shell script git-cherry with a version written in C.
The behaviour of the new version differs from the original in two
points: it has no long help any more, and it is handling the (optional)
third parameter a bit differently. Basically, it does the equivalent
of
ours=`git-rev-list $ours ^$limit ^$upstream`
instead of
ours=`git-rev-list $ours ^$limit`
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Both the git-prune manpage and everday.txt say that git-prune should also prune
unpacked objects that are also found in packs, by running git prune-packed.
Junio thought this was "a regression when prune was rewritten as a built-in."
So modify prune to call prune-packed again.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Currently it does what git-blame does, but only faster.
More importantly, its internal structure is designed to support
content movement (aka cut-and-paste) more easily by allowing
more than one paths to be taken from the same commit.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* master: (72 commits)
runstatus: do not recurse into subdirectories if not needed
grep: fix --fixed-strings combined with expression.
grep: free expressions and patterns when done.
Corrected copy-and-paste thinko in ignore executable bit test case.
An illustration of rev-list --parents --pretty=raw
Allow git-checkout when on a non-existant branch.
gitweb: Decode long title for link tooltips
git-svn: Fix fetch --no-ignore-externals with GIT_SVN_NO_LIB=1
Ignore executable bit when adding files if filemode=0.
Remove empty ref directories that prevent creating a ref.
Use const for interpolate arguments
git-archive: update documentation
Deprecate merge-recursive.py
gitweb: fix over-eager application of esc_html().
Allow '(no author)' in git-svn's authors file.
Allow 'svn fetch' on '(no date)' revisions in Subversion.
git-repack: allow git-repack to run in subdirectory
Remove upload-tar and make git-tar-tree a thin wrapper to git-archive
git-tar-tree: Move code for git-archive --format=tar to archive-tar.c
git-tar-tree: Remove duplicate git_config() call
...
* jc/lt-ref2-with-lt-refs:
Fix show-ref usage for --dereference.
Document git-show-ref [-s|--hash] option.
Add man page for git-show-ref
gitignore: git-show-ref is a generated file.
Use Linus' show ref in "git-branch.sh".
Add [-s|--hash] option to Linus' show-ref.
Teach "git checkout" to use git-show-ref
Add "git show-ref" builtin command
git-zip-tree can be safely removed because it was never part of a formal
release. This patch makes 'git-archive --format=zip' the one and only git
ZIP file creation command.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* lt/refs: (58 commits)
git-pack-refs --prune
pack-refs: do not pack symbolic refs.
Tell between packed, unpacked and symbolic refs.
Add callback data to for_each_ref() family.
symbolit-ref: fix resolve_ref conversion.
Fix broken sha1 locking
fsck-objects: adjust to resolve_ref() clean-up.
gitignore: git-pack-refs is a generated file.
wt-status: use simplified resolve_ref to find current branch
Fix t1400-update-ref test minimally
Enable the packed refs file format
Make ref resolution saner
Add support for negative refs
Start handling references internally as a sorted in-memory list
gitweb fix validating pg (page) parameter
git-repack(1): document --window and --depth
git-apply(1): document --unidiff-zero
gitweb: fix warnings in PATH_INFO code and add export_ok/strict_export
upload-archive: monitor child communication even more carefully.
gitweb: export options
...
* lt/refs: (58 commits)
git-pack-refs --prune
pack-refs: do not pack symbolic refs.
Tell between packed, unpacked and symbolic refs.
Add callback data to for_each_ref() family.
symbolit-ref: fix resolve_ref conversion.
Fix broken sha1 locking
fsck-objects: adjust to resolve_ref() clean-up.
gitignore: git-pack-refs is a generated file.
wt-status: use simplified resolve_ref to find current branch
Fix t1400-update-ref test minimally
Enable the packed refs file format
Make ref resolution saner
Add support for negative refs
Start handling references internally as a sorted in-memory list
gitweb fix validating pg (page) parameter
git-repack(1): document --window and --depth
git-apply(1): document --unidiff-zero
gitweb: fix warnings in PATH_INFO code and add export_ok/strict_export
upload-archive: monitor child communication even more carefully.
gitweb: export options
...
This also adds some very rudimentary support for the notion of packed
refs. HOWEVER! At this point it isn't used to actually look up a ref
yet, only for listing them (ie "for_each_ref()" and friends see the
packed refs, but none of the other single-ref lookup routines).
Note how we keep two separate lists: one for the loose refs, and one for
the packed refs we read. That's so that we can easily keep the two apart,
and read only one set or the other (and still always make sure that the
loose refs take precedence).
[ From this, it's not actually obvious why we'd keep the two separate
lists, but it's important to have the packed refs on their own list
later on, when I add support for looking up a single loose one.
For that case, we will want to read _just_ the packed refs in case the
single-ref lookup fails, yet we may end up needing the other list at
some point in the future, so keeping them separated is important ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jk/diff:
wt-status: remove extraneous newline from 'deleted:' output
git-status: document colorization config options
Teach runstatus about --untracked
git-commit.sh: convert run_status to a C builtin
Move color option parsing out of diff.c and into color.[ch]
diff: support custom callbacks for output
* jc/archive:
git-tar-tree: devolve git-tar-tree into a wrapper for git-archive
git-archive: inline default_parse_extra()
builtin-archive.c: rename remote_request() to extract_remote_arg()
upload-archive: monitor child communication more carefully.
Add sideband status report to git-archive protocol
Prepare larger packet buffer for upload-pack protocol.
Teach --exec to git-archive --remote
Add --verbose to git-archive
archive: force line buffered output to stderr
Use xstrdup instead of strdup in builtin-{tar,zip}-tree.c
Move sideband server side support into reusable form.
Move sideband client side support into reusable form.
archive: allow remote to have more formats than we understand.
git-archive: make compression level of ZIP archives configurable
Add git-upload-archive
git-archive: wire up ZIP format.
git-archive: wire up TAR format.
Add git-archive
This adds a new command, git-for-each-ref. You can have it iterate
over refs and have it output various aspects of the objects they
refer to.
Signed-off-by: Junio C Hamano <junkio@cox.net>
It's kind of like "git peek-remote", but works only locally (and thus
avoids the whole overhead of git_connect()) and has some extra
verification features.
For example, it allows you to filter the results, and to choose whether
you want the tag dereferencing or not. You can also use it to just test
whether a particular ref exists.
For example:
git show-ref master
will show all references called "master", whether tags or heads or
anything else, and regardless of how deep in the reference naming
hierarchy they are (so it would show "refs/heads/master" but also
"refs/remote/other-repo/master").
When using the "--verify" flag, the command requires an exact ref path:
git show-ref --verify refs/heads/master
will only match the exact branch called "master".
If nothing matches, show-ref will return an error code of 1, and in the
case of verification, it will show an error message.
For scripting, you can ask it to be quiet with the "--quiet" flag, which
allows you to do things like
git-show-ref --quiet --verify -- "refs/heads/$headname" ||
echo "$headname is not a valid branch"
to check whether a particular branch exists or not (notice how we don't
actually want to show any results, and we want to use the full refname for
it in order to not trigger the problem with ambiguous partial matches).
To show only tags, or only proper branch heads, use "--tags" and/or
"--heads" respectively (using both means that it shows tags _and_ heads,
but not other random references under the refs/ subdirectory).
To do automatic tag object dereferencing, use the "-d" or "--dereference"
flag, so you can do
git show-ref --tags --dereference
to get a listing of all tags together with what they dereference.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This command implements the git archive protocol on the server
side. This command is not intended to be used by the end user.
Underlying git-archive command line options are sent over the
protocol from "git-archive --remote=...", just like upload-tar
currently does with "git-tar-tree=...".
As for "git-archive" command implementation, this new command
does not execute any existing "git-{tar,zip}-tree" but rely
on the archive API defined by "git-archive" patch. Hence we
get 2 good points:
- "git-archive" and "git-upload-archive" share all option
parsing code.
- All kind of git-upload-{tar,zip} can be deprecated.
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-archive is a command to make TAR and ZIP archives of a git tree.
It helps prevent a proliferation of git-{format}-tree commands.
Instead of directly calling git-{tar,zip}-tree command, it defines
a very simple API, that archiver should implement and register in
"git-archive.c". This API is made up by 2 functions whose prototype
is defined in "archive.h" file.
- The first one is used to parse 'extra' parameters which have
signification only for the specific archiver. That would allow
different archive backends to have different kind of options.
- The second one is used to ask to an archive backend to build
the archive given some already resolved parameters.
The main reason for making this API is to avoid using
git-{tar,zip}-tree commands, hence making them useless. Maybe it's
time for them to die ?
It also implements remote operations by defining a very simple
protocol: it first sends the name of the specific uploader followed
the repository name (git-upload-tar git://example.org/repo.git).
Then it sends options. It's done by sending a sequence of one
argument per packet, with prefix "argument ", followed by a flush.
The remote protocol is implemented in "git-archive.c" for client
side and is triggered by "--remote=<repo>" option. For example,
to fetch a TAR archive in a remote repo, you can issue:
$ git archive --format=tar --remote=git://xxx/yyy/zzz.git HEAD
We choose to not make a new command "git-fetch-archive" for example,
avoind one more GIT command which should be nice for users (less
commands to remember, keeps existing --remote option).
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Acked-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This creates a new git-runstatus which should do roughly the same thing
as the run_status function from git-commit.sh. Except for color support,
the main focus has been to keep the output identical, so that it can be
verified as correct and then used as a C platform for other improvements to
the status printing code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In the Windows world ZIP files are better supported than tar files.
Windows even includes built-in support for ZIP files nowadays.
git-zip-tree is similar to git-tar-tree; it creates ZIP files out of
git trees. It stores the commit ID (if available) in a ZIP file comment
which can be extracted by unzip.
There's still quite some room for improvement: this initial version
supports no symlinks, calls write() way too often (three times per file)
and there is no unit test.
[jc: with a minor typefix to avoid void* arithmetic]
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Convert git-verify-pack to a builtin command. Also rename ac to argc
and av to argv for consistancy.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This cleans up the build procedure for built-in commands by:
- generating mostly redundant definition of BUILT_INS from
BUILTIN_OBJS in the Makefile,
- renaming a few files to make the above possible, and
- sorting the built-in command table in git.c.
It might be a good idea to binary search (or perfect hash) the built-in
command table, but that can be done later when somebody feels like.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The cmd_usage() routine was causing warning messages due to a NULL
format parameter being passed in three out of four calls. This is a
problem if you want to compile with -Werror. A simple solution is to
simply remove the GNU __attribute__ format pragma from the cmd_usage()
declaration in the header file. The function interface was somewhat
muddled anyway, so re-write the code to finesse the problem.
[jc: this incidentally revealed that t9100 test assumed that the output
from "git help" to be fixed in stone, but this patch lower-cases
"Usage" to "usage". Update the test not to rely on "git help" output.]
Signed-off-by: Ramsay Allan Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The header builtin.h was, incorrectly, redefining PATH_MAX which
causes a header order dependency in builtin-write-tree.c. The fix
is to simply include <limits.h> directly to obtain the correct
definition of PATH_MAX.
Signed-off-by: Ramsay Allan Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This merges the new built-in calling convention code into Johannes's
builtin-mv topic in order to resolve their conflicts early on.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This changes the calling convention of built-in commands and
passes the "prefix" (i.e. pathname of $PWD relative to the
project root level) down to them.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This also moves add_file_to_index() to read-cache.c. Oh, and while
touching builtin-add.c, it also removes a duplicate git_config() call.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This actually removes the objects to be pruned, unless you specify "-n"
(at which point it will just tell you which files it would prune).
This doesn't do the pack-file pruning that the shell-script used to do,
but if somebody really wants to, they could add it easily enough. I wonder
how useful it is, though, considering that "git repack -a -d" is just a
lot more efficient and generates a better end result.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
