when trying 'M-x git-status' in a submodule created with recent (1.7.5+)
git, the command fails with
| ... is not a git working tree
This is caused by creating submodules with '--separate-git-dir' but
still checking for a working tree by testing for a '.git' directory.
The patch fixes this by relaxing the existing detection a little bit.
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Acked-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
eLisp fixes for a contrib/ script.
* lm/git-blame-el:
git-blame.el: Do not use bare 0 to mean (point-min)
git-blame.el: Use with-current-buffer where appropriate
git-blame.el: Do not use goto-line in lisp code
In git-blame-filter and git-blame-create-overlay we want to save
(along with the values of point and mark) the current-buffer in scope
when calling the functions. The idiom
(save-excursion
(set-buffer buf)
...)
will correctly restore the correct buffer, but will not save the
values of point and mark in buf (only in the buffer current when the
save-excursion call is executed). The intention of these functions is
to save the current buffer from the calling scope and the values of
point and mark in the buffer they are modifying. The correct idiom
for this is
(with-current-buffer buf
(save-excursion
...))
Signed-off-by: Rüdiger Sonderfeld <ruediger@c-plusplus.de>
Signed-off-by: Lawrence Mitchell <wence@gmx.li>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
goto-line is a user-level command, instead use the lisp-level
construct recommended in Emacs documentation.
Signed-off-by: Rüdiger Sonderfeld <ruediger@c-plusplus.de>
Signed-off-by: Lawrence Mitchell <wence@gmx.li>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using mapcar here is a waste of memory because the mapped result
is not used.
Noticed by emacs ("Warning: `mapcar' called for effect").
[jn: split from a larger patch, with new description]
Signed-off-by: Rüdiger Sonderfeld <ruediger@c-plusplus.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If font-lock is disabled, font-lock-compile-keywords complains.
Really what we want to do is to replace log-edit's font-lock
definitions with our own, so define a major mode deriving from
log-edit and set up font-lock-defaults there. We then use the
optional MODE argument to log-edit to set up the major mode of the
commit buffer appropriately.
Signed-off-by: Lawrence Mitchell <wence@gmx.li>
Acked-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
c5022f57 (git-blame.el: Change how blame information is shown,
2009-09-29) taught the "M-x git-blame" mode to format its output
in a more interesting way, making use of the format-spec function.
format-spec is included in Emacs 23 and is a useful function.
Older emacsen can get it from Gnus. In all emacsen, we need
to 'require it before use to avoid warnings:
git-blame.el:483:1:Warning: the function `format-spec' is not known to be
defined.
Reported-by: Sergei Organov <osv@javad.com>
Reported-by: Kevin Ryde <user42@zip.com.au>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is more customizable, and uses a line prefix to show the commit.
Signed-off-by: David Kågedal <davidk@lysator.liu.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Use `git-add-file' to mark unmerged files as resolved in the
*git-status* buffer to be consistent with git's CLI instructions. Also
remove `git-resolve-file' to make it clear that that "R" is a now a
free keybinding.
Signed-off-by: Martin Nordholts <martinn@src.gnome.org>
Acked-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This avoids a possibly redundant sort in git-update-status-files and
git-status-filenames-map, and allows callers to continue using the
list without having to copy it.
It also fixes the confusing success messages reported by Brent
Goodrick.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
vc-git is distributed with Emacs since version 22.2, and is maintained
in the Emacs CVS tree. This file is obsolete and causes trouble for
people who want to add contrib/emacs to their load-path.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
This allows using fill-paragraph on the log message without
interference from the various header fields.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Support for cherry-picking and reverting commits, with automatic
formatting of the commit log message. Bound to C-c C-p and C-c C-v
respectively.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Prompts for a branch name, create a new branch at HEAD and switch to
it. Bound to C-c C-b by default.
Based on a patch by Rémi Vanicat <vanicat@debian.org>.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Prompts for a branch name and checks it out. Bound to C-c C-o by
default.
Based on a patch by Rémi Vanicat <vanicat@debian.org>.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
This avoids the need to go through the list twice, which helps
performance on large file lists.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
This allows to insert a file in the buffer no matter what its state
is, making it possible for instance to remove an up-to-date file.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Use a single Merge: header instead of one Parent: header for each
parent, and don't list the current HEAD as a merged head. Support
symbolic references too.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Display all errors happening in the various subcommands of the commit
sequence, and abort on any error.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
This should have been part of 24a2293 (git-blame.el: show the when, who
and what in the minibuffer., 2008-02-12), that changed from using
--pretty=oneline to --pretty=format:... without terminating newline.
Acked-by: David Kågedal <davidk@lysator.liu.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With git-am, it sounds awkward to have the patches in ".git/rebase/",
but for technical reasons, we have to keep the same directory name
for git-am and git-rebase. ".git/rebase-apply" seems to be a good
compromise.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the files generated and used during a rebase are never to be
tracked, they should live in $GIT_DIR. While at it, avoid the rather
meaningless term "dotest" to "rebase", and unhide ".dotest-merge".
This was wished for on the mailing list, but so far unimplemented.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit dbe48256b4, which
caused mis-encoding of non-ASCII author/committer names when the
git-status mode is used to create commits.
Signed-off-by: Karl Hasselström <kha@treskal.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to the similar patch from David Kågedal [1], "this will make
it a little less posix-dependent and more efficient." However, there
are two other areas that need to replaced, namely
git-run-command-region and git-run-hooks. This patch implements the
changes of [1] onto those Emacs Lisp functions.
If unpatched, using the git port "msysgit" on Windows will require
defadvice changes as shown at [2] (also explained at 4msysgit.git
[3]).
I have tested git-run-command-region on msysgit, because this is
always called by git-commit (via git-commit-tree <- git-do-commit <-
git-commit-file). However, I could not test git-run-hooks because it
currently does not work on the Emacs Windows port. The latter reports
the hooks files as a+rw and a-x, despite msysgit and cygwin chmod
setting on the respective files.
References:
[1] f27e558643
[2] http://groups.google.com/group/msysgit/browse_thread/thread/b852fef689817707
[3] http://repo.or.cz/w/git/mingw/4msysgit.git?a=commit;h=3c30e5e87358eba7b6d7dcd6301ae8438f0c30ea
Signed-off-by: Clifford Caoile <piyo@users.sourceforge.net>
Acked-by: David Kågedal <davidk@lysator.liu.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The following patch will introduce a new configuration variable,
"format.pretty", from then on the pretty format without specifying
"--pretty" might not be the default "--pretty=medium", it depends on
the user's config. So all kinds of Shell/Perl/Emacs scripts that needs
the default medium pretty format must specify it explicitly.
Signed-off-by: Denis Cheng <crquan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Documentation cherry-pick: Fix cut-and-paste error
git.el: find the git-status buffer whatever its name is
git-gui: Paper bag fix info dialog when no files are staged at commit
git-status used the buffer name to find git-status buffers, and that
can fail if the buffer has another name, for example when multiple
working directories is tracked.
Signed-off-by: Rémi Vanicat <vanicat@debian.org>
Acked-by: Alexandre Julliard <julliard@winehq.org>
Tested-by: Xavier Maillard <xma@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Tested-by: Karl Hasselström <kha@treskal.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will make it a little less posix-dependent, and more efficient.
Included is also a minor doc improvement.
Signed-off-by: David Kågedal <davidk@lysator.liu.se>
Acked-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the default operation to show 'when (day the commit was made),
who (who made the commit), what (what the commit log was)' in the
minibuffer instead of SHA1 and title of the commit log.
Since the user may prefer other displaying options, it is made as a
user-configurable option.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Where possible, capture the output of the git command and display it
if the command fails.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refuse to revert a file if it is modified in an existing buffer but
not saved. On success, revert the buffers that contains the files that
have been reverted.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It reverts the commit and sets up the status and edit log buffer to
allow making changes and recommitting it. Bound to C-c C-a.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of recursing into directories that only contain unknown files,
display only the directory itself. Its contents can be expanded with
git-find-file (bound to C-m).
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't set the needs-refresh flag when inserting a new file info, since
ewoc refreshes it upon insert already; this makes a full refresh twice
as fast.
Also make git-fileinfo-prettyprint a little faster by not retrieving
permission values twice.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of just setting the state to up-to-date, retrieve the full
state again, so that the file type can be displayed properly.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Skip non-zero stage files during git-ls-files -c, they are handled
later. Also fix git-insert-info-list to merge duplicate file names.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Handle the T status from git-diff-index to display type changes
between file/symlink/subproject. Also always show the file type for
symlink and subprojects to indicate that they are not normal files.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
