We do not want a link to 0{40} object stored anywhere in our objects.
* jk/maint-null-in-trees:
fsck: detect null sha1 in tree entries
do not write null sha1s to on-disk index
diff: do not use null sha1 as a sentinel value
diff_setup_done() has historically returned an error code, but lost
the last nonzero return in 943d5b7 (allow diff.renamelimit to be set
regardless of -M/-C, 2006-08-09). The callers were in a pretty
confused state: some actually checked for the return code, and some
did not.
Let it return void, and patch all callers to take this into account.
This conveniently also gets rid of a handful of different(!) error
messages that could never be triggered anyway.
Note that the function can still die().
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The diff code represents paths using the diff_filespec
struct. This struct has a sha1 to represent the sha1 of the
content at that path, as well as a sha1_valid member which
indicates whether its sha1 field is actually useful. If
sha1_valid is not true, then the filespec represents a
working tree file (e.g., for the no-index case, or for when
the index is not up-to-date).
The diff_filespec is only used internally, though. At the
interfaces to the diff subsystem, callers feed the sha1
directly, and we create a diff_filespec from it. It's at
that point that we look at the sha1 and decide whether it is
valid or not; callers may pass the null sha1 as a sentinel
value to indicate that it is not.
We should not typically see the null sha1 coming from any
other source (e.g., in the index itself, or from a tree).
However, a corrupt tree might have a null sha1, which would
cause "diff --patch" to accidentally diff the working tree
version of a file instead of treating it as a blob.
This patch extends the edges of the diff interface to accept
a "sha1_valid" flag whenever we accept a sha1, and to use
that flag when creating a filespec. In some cases, this
means passing the flag through several layers, making the
code change larger than would be desirable.
One alternative would be to simply die() upon seeing
corrupted trees with null sha1s. However, this fix more
directly addresses the problem (while bogus sha1s in a tree
are probably a bad thing, it is really the sentinel
confusion sending us down the wrong code path that is what
makes it devastating). And it means that git is more capable
of examining and debugging these corrupted trees. For
example, you can still "diff --raw" such a tree to find out
when the bogus entry was introduced; you just cannot do a
"--patch" diff (just as you could not with any other
corrupted tree, as we do not have any content to diff).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"log --graph" was not very friendly with "--stat" option and its output
had line breaks at wrong places.
By Lucian Poston (5) and Zbigniew Jędrzejewski-Szmek (2)
* lp/diffstat-with-graph:
t4052: work around shells unable to set COLUMNS to 1
Prevent graph_width of stat width from falling below min
t4052: Test diff-stat output with minimum columns
t4052: Adjust --graph --stat output for prefixes
Adjust stat width calculations to take --graph output into account
Add output_prefix_length to diff_options
t4052: test --stat output with --graph
Forbids rename detection logic from matching two empty files as renames
during merge-recursive to prevent mismerges.
By Jeff King
* jk/diff-no-rename-empty:
merge-recursive: don't detect renames of empty files
teach diffcore-rename to optionally ignore empty content
make is_empty_blob_sha1 available everywhere
drop casts from users EMPTY_TREE_SHA1_BIN
Add output_prefix_length to diff_options. Initialize the value to 0 and only
set it when graph.c:diff_output_prefix_callback() is called.
Signed-off-by: Lucian Poston <lucian.poston@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Resurrects the preparatory clean-up patches from another topic that was
discarded, as this would give a saner foundation to build on diff.algo
configuration option series.
* jc/diff-algo-cleanup:
xdiff: PATIENCE/HISTOGRAM are not independent option bits
xdiff: remove XDL_PATCH_* macros
Our rename detection is a heuristic, matching pairs of
removed and added files with similar or identical content.
It's unlikely to be wrong when there is actual content to
compare, and we already take care not to do inexact rename
detection when there is not enough content to produce good
results.
However, we always do exact rename detection, even when the
blob is tiny or empty. It's easy to get false positives with
an empty blob, simply because it is an obvious content to
use as a boilerplate (e.g., when telling git that an empty
directory is worth tracking via an empty .gitignore).
This patch lets callers specify whether or not they are
interested in using empty files as rename sources and
destinations. The default is "yes", keeping the original
behavior. It works by detecting the empty-blob sha1 for
rename sources and destinations.
One more flexible alternative would be to allow the caller
to specify a minimum size for a blob to be "interesting" for
rename detection. But that would catch small boilerplate
files, not large ones (e.g., if you had the GPL COPYING file
in many directories).
A better alternative would be to allow a "-rename"
gitattribute to allow boilerplate files to be marked as
such. I'll leave the complexity of that solution until such
time as somebody actually wants it. The complaints we've
seen so far revolve around empty files, so let's start with
the simple thing.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By Junio C Hamano (2) and Ramsay Jones (1)
* jc/pickaxe-ignore-case:
ctype.c: Fix a sparse warning
pickaxe: allow -i to search in patch case-insensitively
grep: use static trans-case table
By Zbigniew Jędrzejewski-Szmek (8) and Junio C Hamano (1)
* zj/diff-stat-dyncol:
: This breaks tests. Perhaps it is not worth using the decimal-width stuff
: for this series, at least initially.
diff --stat: add config option to limit graph width
diff --stat: enable limiting of the graph part
diff --stat: add a test for output with COLUMNS=40
diff --stat: use a maximum of 5/8 for the filename part
merge --stat: use the full terminal width
log --stat: use the full terminal width
show --stat: use the full terminal width
diff --stat: use the full terminal width
diff --stat: tests for long filenames and big change counts
A new option --stat-graph-width=<width> can be used to limit the width
of the graph part even is more space is available. Up to <width>
columns will be used for the graph.
If commits changing a lot of lines are displayed in a wide terminal
window (200 or more columns), and the +- graph uses the full width,
the output can be hard to comfortably scan with a horizontal movement
of human eyes. Messages wrapped to about 80 columns would be
interspersed with very long +- lines. It makes sense to limit the
width of the graph part to a fixed value (e.g. 70 columns), even if
more columns are available.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log -S<string>" is a useful way to find the last commit in the
codebase that touched the <string>. As it was designed to be used by a
porcelain script to dig the history starting from a block of text that
appear in the starting commit, it never had to look for anything but an
exact match.
When used by an end user who wants to look for the last commit that
removed a string (e.g. name of a variable) that he vaguely remembers,
however, it is useful to support case insensitive match.
When given the "--regexp-ignore-case" (or "-i") option, which originally
was designed to affect case sensitivity of the search done in the commit
log part, e.g. "log --grep", the matches made with -S/-G pickaxe search is
done case insensitively now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because the default Myers, patience and histogram algorithms cannot be in
effect at the same time, XDL_PATIENCE_DIFF and XDL_HISTOGRAM_DIFF are not
independent bits. Instead of wasting one bit per algorithm, define a few
macros to access the few bits they occupy and update the code that access
them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --stat" and "git apply --stat" now learn to print the line
"%d files changed, %d insertions(+), %d deletions(-)" in singular form
whenever applicable. "0 insertions" and "0 deletions" are also omitted
unless they are both zero.
This matches how versions of "diffstat" that are not prehistoric produced
their output, and also makes this line translatable.
[jc: with help from Thomas Dickey in archaeology of "diffstat"]
[jc: squashed Jonathan's updates to illustrations in tutorials and a test]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of passing the hash of a commit and then searching that
same commit in the single caller, simply pass the commit directly.
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Maintaining an array of hashes is easier using sha1_array than
open-coding it. This patch also fixes a leak of the SHA1 array
in diff_tree_combined_merge().
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the option -W/--function-context to git diff. It is similar to
the same option of git grep and expands the context of change hunks
so that the whole surrounding function is shown. This "natural"
context can allow changes to be understood better.
Note: GNU patch doesn't like diffs generated with the new option;
it seems to expect context lines to be the same before and after
changes. git apply doesn't complain.
This implementation has the same shortcoming as the one in grep,
namely that there is no way to explicitly find the end of a
function. That means that a few lines of extra context are shown,
right up to the next recognized function begins. It's already
useful in its current form, though.
The function get_func_line() in xdiff/xemit.c is extended to work
forward as well as backward to find post-context as well as
pre-context. It returns the position of the first found matching
line. The func_line parameter is made optional, as we don't need
it for -W.
The enhanced function is then used in xdl_emit_diff() to extend
the context as needed. If the added context overlaps with the
next change, it is merged into the current hunk.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/color-and-pager:
want_color: automatically fallback to color.ui
diff: don't load color config in plumbing
config: refactor get_colorbool function
color: delay auto-color decision until point of use
git_config_colorbool: refactor stdout_is_tty handling
diff: refactor COLOR_DIFF from a flag into an int
setup_pager: set GIT_PAGER_IN_USE
t7006: use test_config helpers
test-lib: add helper functions for config
t7006: modernize calls to unset
Conflicts:
builtin/commit.c
parse-options.c
This lets us store more than just a bit flag for whether we
want color; we can also store whether we want automatic
colors. This can be useful for making the automatic-color
decision closer to the point of use.
This mostly just involves replacing DIFF_OPT_* calls with
manipulations of the flag. The biggest exception is that
calls to DIFF_OPT_TST must check for "o->use_color > 0",
which lets an "unknown" value (i.e., the default) stay at
"no color". In the previous code, a value of "-1" was not
propagated at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the "do not stop feeding the backend early" logic into a small
helper function and use it in both run_diff_files() and diff_tree() that
has the stop-early optimization. We may later add other types of diffcore
transformation that require to look at the whole result like diff-filter
does, and having the logic in a single place is essential for longer term
maintainability.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Often one is interested in the full --stat output only for commits which
change a few files, but not others, because larger restructuring gives a
--stat which fills a few screens.
Introduce a new option --stat-count=<count> which limits the --stat output
to the first <count> lines, followed by a "..." line. It can
also be given as the third parameter in
--stat=<width>,<name-width>,<count>.
Also, the unstuck form is supported analogous to the other two stat
parameters.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jh/dirstat-lines:
Mark dirstat error messages for translation
Improve error handling when parsing dirstat parameters
New --dirstat=lines mode, doing dirstat analysis based on diffstat
Allow specifying --dirstat cut-off percentage as a floating point number
Add config variable for specifying default --dirstat behavior
Refactor --dirstat parsing; deprecate --cumulative and --dirstat-by-file
Make --dirstat=0 output directories that contribute < 0.1% of changes
Add several testcases for --dirstat and friends
* jc/fix-diff-files-unmerged:
diff-files: show unmerged entries correctly
diff: remove often unused parameters from diff_unmerge()
diff.c: return filepair from diff_unmerge()
test: use $_z40 from test-lib
This patch adds an alternative implementation of show_dirstat(), called
show_dirstat_by_line(), which uses the more expensive diffstat analysis
(as opposed to show_dirstat()'s own (relatively inexpensive) analysis)
to derive the numbers from which the --dirstat output is computed.
The alternative implementation is controlled by the new "lines" parameter
to the --dirstat option (or the diff.dirstat config variable).
For binary files, the diffstat analysis counts bytes instead of lines,
so to prevent binary files from dominating the dirstat results, the
byte counts for binary files are divided by 64 before being compared to
their textual/line-based counterparts. This is a stupid and ugly - but
very cheap - heuristic.
In linux-2.6.git, running the three different --dirstat modes:
time git diff v2.6.20..v2.6.30 --dirstat=changes > /dev/null
vs.
time git diff v2.6.20..v2.6.30 --dirstat=lines > /dev/null
vs.
time git diff v2.6.20..v2.6.30 --dirstat=files > /dev/null
yields the following average runtimes on my machine:
- "changes" (default): ~6.0 s
- "lines": ~9.6 s
- "files": ~0.1 s
So, as expected, there's a considerable performance hit (~60%) by going
through the full diffstat analysis as compared to the default "changes"
analysis (obviously, "files" is much faster than both). As such, the
"lines" mode is probably only useful if you really need the --dirstat
numbers to be consistent with the numbers returned from the other
--*stat options.
The patch also includes documentation and tests for the new dirstat mode.
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Only the first digit after the decimal point is kept, as the dirstat
calculations all happen in permille.
Selftests verifying floating-point percentage input has been added.
Improved-by: Junio C Hamano <gitster@pobox.com>
Improved-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
e9c8409 (diff-index --cached --raw: show tree entry on the LHS for
unmerged entries., 2007-01-05) added a <mode, object name> pair as
parameters to this function, to store them in the pre-image side of an
unmerged file pair. Now the function is fixed to return the filepair it
queued, we can make the caller on the special case codepath to do so.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The underlying diff_queue() returns diff_filepair so that the caller can
further add information to it, and the helper function diff_unmerge()
utilizes the feature itself, but does not expose it to its callers, which
was kind of selfish.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When reviewing a patch while concentrating primarily on the text after
then change, wading through pages of deleted text involves a cognitive
burden.
Introduce the -D option that omits the preimage text from the patch output
for deleted files. When used with -B (represent total rewrite as a single
wholesale deletion followed by a single wholesale addition), the preimage
text is also omitted.
To prevent such a patch from being applied by mistake, the output is
designed not to be usable by "git apply" (or GNU "patch"); it is strictly
for human consumption.
It of course is possible to "apply" such a patch by hand, as a human can
read the intention out of such a patch. It however is impossible to apply
such a patch even manually in reverse, as the whole point of this option
is to omit the information necessary to do so from the output.
Initial request by Mart Sõmermaa, documentation and tests helped by
Michael J Gruber.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there are too many paths in the project, the number of rename source
candidates "git diff -C -C" finds will exceed the rename detection limit,
and no inexact rename detection is performed. We however could fall back
to "git diff -C" if the number of modified paths is sufficiently small.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We might spend many seconds doing inexact rename detection
with no output. It's nice to let the user know that
something is actually happening.
This patch adds the infrastructure, but no callers actually
turn on progress reporting.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The warning is generated deep in the diffcore code, which
means that it will come first, followed possibly by a spew
of conflicts, making it hard to see.
Instead, let's have diffcore pass back the information about
how big the rename limit would needed to have been, and then
the caller can provide a more appropriate message (and at a
more appropriate time).
No refactoring of other non-merge callers is necessary,
because nobody else was even using the warn_on_rename_limit
feature.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recursive merge strategy turns on rename detection but leaves the
rename threshold at the default. Add a strategy option to allow the user
to specify a rename threshold to use.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "-G<regexp>" that is similar to "-S<regexp> --pickaxe-regexp" to the
"git diff" family of commands. This limits the diff queue to filepairs
whose patch text actually has an added or a deleted line that matches the
given regexp. Unlike "-S<regexp>", changing other parts of the line that
has a substring that matches the given regexp IS counted as a change, as
such a change would appear as one deletion followed by one addition in a
patch text.
Unlike -S (pickaxe) that is intended to be used to quickly detect a commit
that changes the number of occurrences of hits between the preimage and
the postimage to serve as a part of larger toolchain, this is meant to be
used as the top-level Porcelain feature.
The implementation unfortunately has to run "diff" twice if you are
running "log" family of commands to produce patches in the final output
(e.g. "git log -p" or "git format-patch"). I think we _could_ cache the
result in-core if we wanted to, but that would require larger surgery to
the diffcore machinery (i.e. adding an extra pointer in the filepair
structure to keep a pointer to a strbuf around, stuff the textual diff to
the strbuf inside diffgrep_consume(), and make use of it in later stages
when it is available) and it may not be worth it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mm/shortopt-detached:
log: parse separate option for --glob
log: parse separate options like git log --grep foo
diff: parse separate options --stat-width n, --stat-name-width n
diff: split off a function for --stat-* option parsing
diff: parse separate options like -S foo
Conflicts:
revision.c
* jc/maint-follow-rename-fix:
log: test for regression introduced in v1.7.2-rc0~103^2~2
diff --follow: do call diffcore_std() as necessary
diff --follow: do not waste cycles while recursing
Usually, diff frontends populate the output queue with filepairs without
any rename information and call diffcore_std() to sort the renames out.
When --follow is in effect, however, diff-tree family of frontend has a
hack that looks like this:
diff-tree frontend
-> diff_tree_sha1()
. populate diff_queued_diff
. if --follow is in effect and there is only one change that
creates the target path, then
-> try_to_follow_renames()
-> diff_tree_sha1() with no pathspec but with -C
-> diffcore_std() to find renames
. if rename is found, tweak diff_queued_diff and put a
single filepair that records the found rename there
-> diffcore_std()
. tweak elements on diff_queued_diff by
- rename detection
- path ordering
- pickaxe filtering
We need to skip parts of the second call to diffcore_std() that is related
to rename detection, and do so only when try_to_follow_renames() did find
a rename. Earlier 1da6175 (Make diffcore_std only can run once before a
diff_flush, 2010-05-06) tried to deal with this issue incorrectly; it
unconditionally disabled any second call to diffcore_std().
This hopefully fixes the breakage.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new "ignore" config option controls the default behavior for "git
status" and the diff family. It specifies under what circumstances they
consider submodules as modified and can be set separately for each
submodule.
The command line option "--ignore-submodules=" has been extended to accept
the new parameter "none" for both status and diff.
Users that chose submodules to get rid of long work tree scanning times
might want to set the "dirty" option for those submodules. This brings
back the pre 1.7.0 behavior, where submodule work trees were never
scanned for modifications. By using "--ignore-submodules=none" on the
command line the status and diff commands can be told to do a full scan.
This option can be set to the following values (which have the same name
and meaning as for the "--ignore-submodules" option of status and diff):
"all": All changes to the submodule will be ignored.
"dirty": Only differences of the commit recorded in the superproject and
the submodules HEAD will be considered modifications, all changes
to the work tree of the submodule will be ignored. When using this
value, the submodule will not be scanned for work tree changes at
all, leading to a performance benefit on large submodules.
"untracked": Only untracked files in the submodules work tree are ignored,
a changed HEAD and/or modified files in the submodule will mark it
as modified.
"none" (which is the default): Either untracked or modified files in a
submodules work tree or a difference between the subdmodules HEAD
and the commit recorded in the superproject will make it show up
as changed. This value is added as a new parameter for the
"--ignore-submodules" option of the diff family and "git status"
so the user can override the settings in the configuration.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the option parsing logic in revision.c to accept separate forms
like `-S foo' in addition to `-Sfoo'. The rest of git already accepted
this form, but revision.c still used its own option parsing.
Short options affected are -S<string>, -l<num> and -O<orderfile>, for
which an empty string wouldn't make sense, hence -<option> <arg> isn't
ambiguous.
This patch does not handle --stat-name-width and --stat-width, which are
special-cases where diff_long_opt do not apply. They are handled in a
separate patch to ease review.
Original patch by Matthieu Moy, plus refactoring by Jonathan Nieder.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* gv/portable:
test-lib: use DIFF definition from GIT-BUILD-OPTIONS
build: propagate $DIFF to scripts
Makefile: Tru64 portability fix
Makefile: HP-UX 10.20 portability fixes
Makefile: HPUX11 portability fixes
Makefile: SunOS 5.6 portability fix
inline declaration does not work on AIX
Allow disabling "inline"
Some platforms lack socklen_t type
Make NO_{INET_NTOP,INET_PTON} configured independently
Makefile: some platforms do not have hstrerror anywhere
git-compat-util.h: some platforms with mmap() lack MAP_FAILED definition
test_cmp: do not use "diff -u" on platforms that lack one
fixup: do not unconditionally disable "diff -u"
tests: use "test_cmp", not "diff", when verifying the result
Do not use "diff" found on PATH while building and installing
enums: omit trailing comma for portability
Makefile: -lpthread may still be necessary when libc has only pthread stubs
Rewrite dynamic structure initializations to runtime assignment
Makefile: pass CPPFLAGS through to fllow customization
Conflicts:
Makefile
wt-status.h
The textconv functionality allows one to convert a file into text before
running diff. But this functionality can be useful to other features
such as blame.
Signed-off-by: Axel Bonnet <axel.bonnet@ensimag.imag.fr>
Signed-off-by: Clément Poulain <clement.poulain@ensimag.imag.fr>
Signed-off-by: Diane Gasselin <diane.gasselin@ensimag.imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The callback can be used to add some prefix string to each line of
diff output.
Signed-off-by: Bo Yang <struggleyb.nku@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
