A new inline function is_dot_or_dotdot is used to check if the
directory name is either "." or "..". It returns a non-zero value if
the given string is "." or "..". It's applicable to a lot of Git
source code.
Signed-off-by: Alexander Potashev <aspotashev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Current git versions ignore everything after # (called <head> in the
following) when pushing. Older versions (before cf818348f1),
interpret #<head> as part of the URL, which make git bail out.
As branches origin from Cogito, it is the best to correct this by using
the behaviour of cg-push, that is to push HEAD to remote refs/heads/<head>.
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows one to track where was the remote's original source, so that
it's possible to decide if it makes sense to migrate it to the config
format or not.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With all calls to alloc_ref() gone, we can remove it and then we're free
to give alloc_ref_from_str() the shorter name. It's a much nicer
interface, as the callers always need to have a name string when they
allocate a ref anyway and don't need to calculate and pass its length+1
any more.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace pairs of alloc_ref() and strcpy() with alloc_ref_from_str(),
simplifying the code.
In connect.c, also a pair of alloc_ref() and memcpy() is replaced --
the additional cost of a strlen() call should not have too much of an
impact. Consistency and simplicity are more important.
In remote.c, the code was allocating 11 bytes more than needed for
the name part, but I couldn't see them being used for anything.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In three cases in remote.c, a "raw" ref is allocated using alloc_ref()
and then its is constructed using sprintf(). Clean it up by adding a
helper function, alloc_ref_with_prefix(), which creates a composite
name. Use it in alloc_ref_from_str(), too, as it simplifies the code.
Open code alloc_ref() in alloc_ref_with_prefix(), as the former is
going to be removed in the patch after the next.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
t1301-shared-repo.sh: don't let a default ACL interfere with the test
git-check-attr(1): add output and example sections
xdiff-interface.c: strip newline (and cr) from line before pattern matching
t4018-diff-funcname: demonstrate end of line funcname matching flaw
t4018-diff-funcname: rework negated last expression test
Typo "does not exists" when git remote update remote.
remote.c: correct the check for a leading '/' in a remote name
Add testcase to ensure merging an early part of a branch is done properly
Conflicts:
t/t7600-merge.sh
This test is supposed to disallow remote entries in the config file of the
form:
[remote "/foobar"]
...
The leading slash in '/foobar' is not acceptable.
Instead it was incorrectly testing that the subkey had no leading '/', which
had no effect since the subkey pointer was made to point at a '.' in the
preceding lines.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many call sites use strbuf_init(&foo, 0) to initialize local
strbuf variable "foo" which has not been accessed since its
declaration. These can be replaced with a static initialization
using the STRBUF_INIT macro which is just as readable, saves a
function call, and takes up fewer lines.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Many call sites immediately initialize allocated memory with zero after
calling xmalloc. A single call to xcalloc can replace this two-call
sequence.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
These functions are not used by any other file.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Some places use the standard malloc/strdup without checking if the
allocation was successful; they should use xmalloc/xstrdup that
check the memory allocation result.
Signed-off-by: Dotan Barak <dotanba@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A number of call sites allocate memory for a refspec array, populate
its members with heap memory, and then free only the refspec pointer
while leaking the memory allocated for the member elements. Provide
a function for freeing the elements of a refspec array and the array
itself.
Caution to callers: code paths must be checked to ensure that the
refspec members "src" and "dst" can be passed to free.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We removed a handful of these useless if-before-free tests several months
ago. This change removes a new one that snuck back in.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A wildcard refspec is internally parsed into a refspec structure with src
and dst strings. Many parts of the code assumed that these do not include
the trailing "/*" when matching the wildcard pattern with an actual ref we
see at the remote. What this meant was that we needed to make sure not
just that the prefix matched, and also that a slash followed the part that
matched.
But a codepath that scans the result from ls-remote and finds matching
refs forgot to check the "matching part must be followed by a slash" rule.
This resulted in "refs/heads/b1" from the remote side to mistakenly match
the source side of "refs/heads/b/*:refs/remotes/b/*" refspec.
Worse, the refspec crafted internally by "git-clone", and a hardcoded
preparsed refspec that is used to implement "git-fetch --tags", violated
this "parsed widcard refspec does not end with slash" rule; simply adding
the "matching part must be followed by a slash" rule then would have
broken codepaths that use these refspecs.
This commit changes the rule to require a trailing slash to parsed
wildcard refspecs. IOW, "refs/heads/b/*:refs/remotes/b/*" is parsed as
src = "refs/heads/b/" and dst = "refs/remotes/b/". This allows us to
simplify the matching logic because we only need to do a prefixcmp() to
notice "refs/heads/b/one" matches and "refs/heads/b1" does not.
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The message length depends on the length of the branch name. In my case,
the branch name "origin/add-chickens2" put the first line of the "your
branch has diverged" message over 80 characters, which triggered "less -FS"
to not exit automatically as expected.
This patch rewords the messages to make the lines generally shorter, so
that you'd need a significantly longer branch name to trigger the problem.
Signed-off-by: Avery Pennarun <apenwarr@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When left-right traversal counts the commits in a diverged history, it
leaves the flags in the commits smudged, and we need to clear them before
we return. Otherwise the caller cannot inspect other branches with this
function again.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
People seem to like "Your branch is ahead by N commit" report made by
"git checkout", but the interface into the statistics function was a bit
clunky. This splits the function into three parts:
* The core "commit counting" function that takes "struct branch" and
returns number of commits to show if we are ahead, behind or forked;
* Convenience "stat formating" function that takes "struct branch" and
formats the report into a given strbuf, using the above function;
* "checkout" specific function that takes "branch_info" (type that is
internal to checkout implementation), calls the above function and
print the formatted result.
in the hope that the former two can be more easily reusable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
match_explicit is called for each push refspec to try to
fully resolve the source and destination sides of the
refspec. Currently, we look at each refspec and report
errors on both the source and the dest side before aborting.
It makes sense to report errors for each refspec, since an
error in one is independent of an error in the other.
However, reporting errors on the 'dst' side of a refspec if
there has been an error on the 'src' side does not
necessarily make sense, since the interpretation of the
'dst' side depends on the 'src' side (for example, when
creating a new unqualified remote ref, we use the same type
as the src ref).
This patch lets match_explicit return early when the src
side of the refspec is bogus. We still look at all of the
refspecs before aborting the push, though.
At the same time, we clean up the call signature, which
previously took an extra "errs" flag. This was pointless, as
we didn't act on that flag, but rather just passed it back
to the caller. Instead, we now use the more traditional
"return -1" to signal an error, and the caller aggregates
the error count.
This change fixes two bugs, as well:
- the early return avoids a segfault when passing a NULL
matched_src to guess_ref()
- the check for multiple sources pointing to a single dest
aborted if the "err" flag was set. Presumably the intent
was not to bother with the check if we had no
matched_src. However, since the err flag was passed in
from the caller, we might abort the check just because a
previous refspec had a problem, which doesn't make
sense.
In practice, this didn't matter, since due to the error
flag we end up aborting the push anyway.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* db/clone-in-c:
Add test for cloning with "--reference" repo being a subset of source repo
Add a test for another combination of --reference
Test that --reference actually suppresses fetching referenced objects
clone: fall back to copying if hardlinking fails
builtin-clone.c: Need to closedir() in copy_or_link_directory()
builtin-clone: fix initial checkout
Build in clone
Provide API access to init_db()
Add a function to set a non-default work tree
Allow for having for_each_ref() list extra refs
Have a constant extern refspec for "--tags"
Add a library function to add an alternate to the alternates file
Add a lockfile function to append to a file
Mark the list of refs to fetch as const
Conflicts:
cache.h
t/t5700-clone-reference.sh
git_config() only had a function parameter, but no callback data
parameter. This assumes that all callback functions only modify
global variables.
With this patch, every callback gets a void * parameter, and it is hoped
that this will help the libification effort.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also fix an underallocation in walker.c::interpret_target().
Signed-off-by: Krzysztof Kowalczyk <kkowalczyk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The refspec refs/tags/*:refs/tags/* is sufficiently common and generic
to merit having a constant instead of generating it as needed.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch provides a way to specify "push matching heads" using a
special refspec ":". This is useful because it allows "push = +:"
as a way to specify that matching refs will be pushed but, in addition,
forced updates will be allowed, which was not possible before.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes a struct ref able to represent a symref, and makes http.c
able to recognize one, and makes transport.c look for "HEAD" as a ref
in the list, and makes it dereference symrefs for the resulting ref,
if any.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, a push like:
git push remote src:dst
would go through the following steps:
1. check for an unambiguous 'dst' on the remote; if it
exists, then push to that ref
2. otherwise, check if 'dst' begins with 'refs/'; if it
does, create a new ref
3. otherwise, complain because we don't know where in the
refs hierarchy to put 'dst'
However, in some cases, we can guess about the ref type of
'dst' based on the ref type of 'src'. Specifically, before
complaining we now check:
2.5. if 'src' resolves to a ref starting with refs/heads
or refs/tags, then prepend that to 'dst'
So now this creates a new branch on the remote, whereas it
previously failed with an error message:
git push master:newbranch
Note that, by design, we limit this DWIM behavior only to
source refs which resolve exactly (including symrefs which
resolve to existing refs). We still complain on a partial
destination refspec if the source is a raw sha1, or a ref
expression such as 'master~10'.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds a remote.*.mirror configuration option that,
when set, automatically puts git-push in --mirror mode for that
remote.
Furthermore, the option is set automatically by `git remote
add --mirror'.
The code in remote.c to parse remote.*.skipdefaultupdate
had a subtle problem: a comment in the code indicated that
special care was needed for boolean options, but this care was
not used in parsing the option. Since I was touching related
code, I did this fix too.
[jc: and I further fixed up the "ignore boolean" code.]
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This can happen if the arguments to git-remote add is switched by the
user, and git would only show an error if fetching was also requested.
Fix it by using the refspec parsing engine to check if the requested
name can be parsed as a remote before add it.
Also cleanup so that the "remote.<name>.url" config name buffer is only
initialized once.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also tighten test to require it to be correct.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-fetch-regression-1.5.4:
git-fetch test: test tracking fetch results, not just FETCH_HEAD
Fix branches file configuration
Tighten refspec processing
Fix the wrong output of `git-show v1.3.0~155^2~4` in documentation.
Fetched remote branch from .git/branches/foo should fetch into
refs/heads/foo. Also when partial URL is given, the fetched head should
always be remote HEAD, and the result should not be stored anywhere.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes the pattern matching code to not store the required final
/ before the *, and then to require each side to be a valid ref (or
empty). In particular, any refspec that looks like it should be a
pattern but doesn't quite meet the requirements will be found to be
invalid as a fallback non-pattern.
This was cherry picked from commit ef00d15 (Tighten refspec processing,
2008-03-17), and two fix-up commits 46220ca (remote.c: Fix overtight
refspec validation, 2008-03-20) and 7d19da4 (refspec: allow colon-less
wildcard "refs/category/*", 2008-03-25) squashed in.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git push --tags elsewhere" is implemented in terms of wildcarded refspec
"refs/tags/*" these days, and the user wants to push the tags under the
same name to the other branch. This resurrects the support for it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We tightened the refspec validation code in an earlier commit ef00d15
(Tighten refspec processing, 2008-03-17) per my suggestion, but the
suggestion was misguided to begin with and it broke this usage:
$ git push origin HEAD~12:master
The syntax of push refspecs and fetch refspecs are similar in that they
are both colon separated LHS and RHS (possibly prefixed with a + to
force), but the similarity ends there. For example, LHS in a push refspec
can be anything that evaluates to a valid object name at runtime (except
when colon and RHS is missing, or it is a glob), while it must be a
valid-looking refname in a fetch refspec. To validate them correctly, the
caller needs to be able to say which kind of refspecs they are. It is
unreasonable to keep a single interface that cannot tell which kind it is
dealing with, and ask it to behave sensibly.
This commit separates the parsing of the two into different functions, and
clarifies the code to implement the parsing proper (i.e. splitting into
two parts, making sure both sides are wildcard or neither side is).
This happens to also allow pushing a commit named with the esoteric "look
for that string" syntax:
$ git push ../test.git ':/remote.c: Fix overtight refspec:master'
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes the pattern matching code to not store the required final
/ before the *, and then to require each side to be a valid ref (or
empty). In particular, any refspec that looks like it should be a
pattern but doesn't quite meet the requirements will be found to be
invalid as a fallback non-pattern.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier we had a cop-out in the documentation to make the
behaviour "undefined" if configuration had more than one
insteadOf that would match the target URL, like this:
[url "git://git.or.cz/"]
insteadOf = "git.or.cz:" ; (1)
insteadOf = "repo.or.cz:" ; (2)
[url "/local/mirror/"]
insteadOf = "git.or.cz:myrepo" ; (3)
insteadOf = "repo.or.cz:" ; (4)
It would be most natural to take the longest and first match, i.e.
- rewrite "git.or.cz:frotz" to "git://git.or.cz/frotz" by using
(1),
- rewrite "git.or.cz:myrepo/xyzzy" to "/local/mirror/xyzzy" by favoring
(3) over (1), and
- rewrite "repo.or.cz:frotz" to "git://git.or.cz/frotz" by
favoring (2) over (4).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows users with different preferences for access methods to the
same remote repositories to rewrite each other's URLs by pattern
matching across a large set of similiarly set up repositories to each
get the desired access.
For example, if you don't have a kernel.org account, you might want
settings like:
[url "git://git.kernel.org/pub/"]
insteadOf = master.kernel.org:/pub
Then, if you give git a URL like:
master.kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6.git
it will act like you gave it:
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git
and you can cut-and-paste pull requests in email without fixing them
by hand, for example.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change removes all obvious useless if-before-free tests.
E.g., it replaces code like this:
if (some_expression)
free (some_expression);
with the now-equivalent:
free (some_expression);
It is equivalent not just because POSIX has required free(NULL)
to work for a long time, but simply because it has worked for
so long that no reasonable porting target fails the test.
Here's some evidence from nearly 1.5 years ago:
http://www.winehq.org/pipermail/wine-patches/2006-October/031544.html
FYI, the change below was prepared by running the following:
git ls-files -z | xargs -0 \
perl -0x3b -pi -e \
's/\bif\s*\(\s*(\S+?)(?:\s*!=\s*NULL)?\s*\)\s+(free\s*\(\s*\1\s*\))/$2/s'
Note however, that it doesn't handle brace-enclosed blocks like
"if (x) { free (x); }". But that's ok, since there were none like
that in git sources.
Beware: if you do use the above snippet, note that it can
produce syntactically invalid C code. That happens when the
affected "if"-statement has a matching "else".
E.g., it would transform this
if (x)
free (x);
else
foo ();
into this:
free (x);
else
foo ();
There were none of those here, either.
If you're interested in automating detection of the useless
tests, you might like the useless-if-before-free script in gnulib:
[it *does* detect brace-enclosed free statements, and has a --name=S
option to make it detect free-like functions with different names]
http://git.sv.gnu.org/gitweb/?p=gnulib.git;a=blob;f=build-aux/useless-if-before-free
Addendum:
Remove one more (in imap-send.c), spotted by Jean-Luc Herren <jlh@gmx.ch>.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pushing a refspec like "HEAD", we used to treat it as
"HEAD:HEAD", which didn't work without rewriting. Instead, we should
resolve the ref. If it's a symref, further require it to point to a
branch, to avoid doing anything especially unexpected. Also remove the
rewriting previously added in builtin-push.
Since the code for "HEAD" uses the regular refspec parsing, it
automatically handles "+HEAD" without anything special.
[jc: added a further test to make sure that "remote.*.push = HEAD" works]
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original problem was that the parsers for configuration files were
getting confused by seeing as nicknames remotes that involved
directory-changing characters. In particular, the branches config file
for ".." was particularly mystifying on platforms that can open
directories and read odd data from them.
The validation function was written by Junio Hamano (with a typo
corrected).
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
