* mz/rebase-tests:
rebase topology tests: fix commit names on case-insensitive file systems
tests: move test for rebase messages from t3400 to t3406
t3406: modernize style
add tests for rebasing merged history
add tests for rebasing root
add tests for rebasing of empty commits
add tests for rebasing with patch-equivalence present
add simple tests of consistency across rebase types
* jk/apache-test-for-2.4:
lib-httpd/apache.conf: check version only after mod_version loads
t/lib-httpd/apache.conf: configure an MPM module for apache 2.4
t/lib-httpd/apache.conf: load compat access module in apache 2.4
t/lib-httpd/apache.conf: load extra auth modules in apache 2.4
t/lib-httpd/apache.conf: do not use LockFile in apache >= 2.4
* cm/remote-mediawiki-perlcritique: (31 commits)
git-remote-mediawiki: make error message more precise
git-remote-mediawiki: add a perlcritic rule in Makefile
git-remote-mediawiki: add a .perlcriticrc file
git-remote-mediawiki: clearly rewrite double dereference
git-remote-mediawiki: fix a typo ("mediwiki" instead of "mediawiki")
git-remote-mediawiki: put non-trivial numeric values in constants.
git-remote-mediawiki: don't use quotes for empty strings
git-remote-mediawiki: replace "unless" statements with negated "if" statements
git-remote-mediawiki: brace file handles for print for more clarity
git-remote-mediawiki: modify strings for a better coding-style
git-remote-mediawiki: put long code into a subroutine
git-remote-mediawiki: remove import of unused open2
git-remote-mediawiki: check return value of open
git-remote-mediawiki: assign a variable as undef and make proper indentation
git-remote-mediawiki: rename a variable ($last) which has the name of a keyword
git-remote-mediawiki: remove unused variable $entry
git-remote-mediawiki: turn double-negated expressions into simple expressions
git-remote-mediawiki: change the name of a variable
git-remote-mediawiki: add newline in the end of die() error messages
git-remote-mediawiki: change style in a regexp
...
* rr/rebase-autostash:
rebase: finish_rebase() in noop rebase
rebase: finish_rebase() in fast-forward rebase
rebase: guard against missing files in read_basic_state()
"git status" learned status.branch and status.short configuration
variables to use --branch and --short options by default (override
with --no-branch and --no-short options from the command line).
* jg/status-config:
status: introduce status.branch to enable --branch by default
status: introduce status.short to enable --short by default
Appending "--diff-algorithm=histogram" at the end of canned command
line for various modes of "diff" is correct for most of them but not
for "stash" that has a non-option already wired in, like so:
'stash' => {
DIFF => 'diff-index -p HEAD',
Appending an extra option after non-option may happen to work due to
overly lax command line parser, but that is not something we should
rely on. Instead, splice in the extra argument immediately after the
command name (i.e. 'diff-index', 'diff-files', etc.).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend the test "migrate a remote from named file in $GIT_DIR/remotes"
to test that multiple "Push:" and "Pull:" lines in the remotes-file
works as expected.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One outdated example encourages the use of $GIT_DIR/branches files.
Replace it with an equivalent example using a remote.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace the <repository> paragraph containing specific references to
$GIT_DIR/branches and "." with a generic urls-or-remotes paragraph
referencing the relevant sections in the git-fetch(1) manpage.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Under the EXAMPLES section, there is one invocation on the git.git
repository that attempts to list the refs master, pu, and rc. The ref
rc does not exist in today's repository, so remove it. Among other
things, this example demonstrates that the "<refs>..." argument is
simply a filter; requesting a non-existent ref is not an error.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add one more test similar to "migrate a remote from named file in
$GIT_DIR/branches" to check that a url with a # can be used to specify
the branch name (as opposed to the constant "master").
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first line of the function checks that the remote-name contains a
slash ('/'), and sets the "slash" variable accordingly. The only caller
of read_branches_file() is remote_get_1(); the calling codepath is
guarded by valid_remote_nick(), which checks that the remote does not
contain a slash. Therefore, the "slash" variable can never be set:
remove the dead code that assumes otherwise.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace instances of ! test -f with test_path_is_missing.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test "migrate a remote from named file in $GIT_DIR/branches" reads
the branches-file, but only checks that the url and fetch-refspec are
set correctly. Check that the push-refspec is also set correctly.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Modernize the style of all tests throughout the file:
- Remove spurious blank lines.
- Indent the test body.
- Make sure that all lines end with &&, to make it easier to spot
breaks in the chain.
- When executing something in a subshell, put the parenthesis on
separate lines and indent the body. Also make sure that the
first statement in the subshell is a 'cd'.
- When redirecting input or output, do not use SP between
redirection operator and the target filename.
- Use the <<-\EOF and <<-EOF forms of heredoc, not <<EOF, when the
command is indented and the heredoc text itself does not have to
have a leading tab.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 3.x tree has been out for a while now. The -2.6 repository name
survived the initial release [1], but kernel.org now only lists
'linux.git' (for aegl as well as torvalds) [2].
[1]: http://article.gmane.org/gmane.linux.kernel/1147422
On 2011-05-30 01:47:57 GMT, Linus Torvalds wrote:
> ... yes, that means that my git tree is still called
> "linux-2.6.git" on kernel.org.
[2]: http://git.kernel.org/cgit/
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
linux-nfs.org seems to have restructured their repository layout since
8391c60 (git-remote.txt: fix example url, 2007-11-02), and Bruce's
repo is now at git://git.linux-nfs.org/projects/bfields/linux.git.
Bruce also has a more richer internal branch structure (master,
everything, for-3.1, ...), so updating the existing example to use his
current repo may be confusing.
To simplify, I've replaced the NFS repo with Greg's staging repo.
I've also updated the output of the surrounding commands to match the
output of a current run through.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There may be times when using one of your local repositories as a
reference for a new clone make sense, but the implied version-bump in
the old example isn't one of them. I think a more intuitive example
is multi-user system with a central reference clone, and the new paths
hint at this use case.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are other examples in git-clone.txt demonstrating both '--bare'
and '-l -s'.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 0442743 introduced an <IfVersion> directive near the
top of the apache config file. However, at that point we
have not yet checked for and loaded the mod_version module.
This means that the directive will behave oddly if
mod_version is dynamically loaded, failing to match when it
should.
We can fix this by moving the whole block below the
LoadModule directive for mod_version.
Reported-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tweak the --topo/date-order test vector a bit and mark the author
dates of two commits (a2 and a3) earlier than their own committer
dates, making them much older than other commits that are made on
parallel branches to simulate the case where a long running topic
was rebased recently.
They will show up as recent in the --date-order output due to their
timestamps, but they appear a lot later in the --author-date-order
output, even though their committer timestamp says otherwise.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce on_dates helper that is similar to on_committer_date but
also sets the author date, not just the committer date.
At this step, just set the same timestamp to the author date as the
committer date, as no test looks at author date yet.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--date-order" output is a slight twist of "--topo-order" in
that commits from parallel histories are shown in their committer
date order without an attempt to clump commits from a single line
of history together like --topo-order does.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The on_committer_date helper in t/lib-t6000 is used in t6002 and
t6003 with timestamps on a single day within a single minute
(i.e. 1971-08-16 00:00) and the tests repeat this over and over.
The actual value of the timestamp, however, does not matter very
much; only their relative ordering does.
Introduce another helper to expand only the suffix of the timestamp
to a full timestamp to make the lines shorter, and use it in this
helper. Also, because all the commits in the test are made with
specific GIT_COMMITTER_DATE, stop unsetting it at the end of the
helper.
We'll be specifying the author timestamp to these test commits in a
later patch, which will be helped with this change.
Also remove a test that was commented-out from t6003; it used to
test a commit with the same parent listed twice, which was allowed
by mistake but was fixed long time ago.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While both GUI and console Cygwin browsers do exist, anecdotal evidence
suggests most users rely on their native Windows browser. cygstart,
which is a long-standing part of the base Cygwin installation, will
cause the page to be opened in the default Windows browser (the one
registered to open .html files).
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prior to commit 81d340d4, we did not print any error message
if a remote transport helper died unexpectedly. If a helper
did not print any error message (e.g., because it crashed),
the user could be left confused. That commit tried to
rectify the situation by printing a note that the helper
exited unexpectedly.
However, this makes a much more common case worse: when a
helper does die with a useful message, we print the extra
"Reading from 'git-remote-foo failed" message. This can also
end up confusing users, as they may not even know what
remote helpers are (e.g., the fact that http support comes
through git-remote-https is purely an implementation detail
that most users do not know or care about).
Since we do not have a good way of knowing whether the
helper printed a useful error, and since the common failure
mode is for it to do so, let's default to remaining quiet.
Debuggers can dig further by setting GIT_TRANSPORT_HELPER_DEBUG.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2901bbe (apply: free patch->{def,old,new}_name fields, 2012-03-21)
cleaned up the memory management of filenames in the patches, but
forgot that find_name_traditional() can return NULL as a way of saying
"I couldn't find a name".
That NULL unfortunately gets passed into xstrdup() next, resulting in
a segfault. Use null_strdup() so as to safely propagate the null,
which will let us emit the correct error message.
Reported-by: DevHC on #git
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Flip the default for color.ui to 'auto', which is what many
tutorials recommend new users to do.
* mm/color-auto-default:
make color.ui default to 'auto'
config: refactor management of color.ui's default value
Makefile simplification.
* fc/makefile:
Makefile: use $^ to avoid listing prerequisites on the command line
build: do not install git-remote-testgit
build: generate and clean test scripts
Many tests that check the behaviour of symbolic links stored in the
index or the tree objects do not have to be skipped on a filesystem
that lack symbolic link support.
* js/test-ln-s-add:
t4011: remove SYMLINKS prerequisite
t6035: use test_ln_s_add to remove SYMLINKS prerequisite
t3509, t4023, t4114: use test_ln_s_add to remove SYMLINKS prerequisite
t3100: use test_ln_s_add to remove SYMLINKS prerequisite
t3030: use test_ln_s_add to remove SYMLINKS prerequisite
t0000: use test_ln_s_add to remove SYMLINKS prerequisite
tests: use test_ln_s_add to remove SYMLINKS prerequisite (trivial cases)
tests: introduce test_ln_s_add
t3010: modernize style
test-chmtime: Fix exit code on Windows
The logic for pulling into an unborn branch was originally
designed to be used on a newly-initialized repository
(d09e79c, git-pull: allow pulling into an empty repository,
2006-11-16). It thus did not initially deal with
uncommitted changes in the unborn branch. The case of an
_unstaged_ untracked file was fixed by 4b3ffe5 (pull: do not
clobber untracked files on initial pull, 2011-03-25).
However, it still clobbered existing staged files, both when
the file exists in the merged commit (it will be
overwritten), and when it does not (it will be deleted).
We fix this by doing a two-way merge, where the "current"
side of the merge is an empty tree, and the "target" side is
HEAD (already updated to FETCH_HEAD at this point). This
amounts to claiming that all work in the index was done vs.
an empty tree, and thus all content of the index is
precious.
Note that this use of read-tree just gives us protection
against overwriting index and working tree changes. It will
not actually result in a 3-way merge conflict in the index.
This is fine, as this is a rare situation, and the conflict
would not be interesting anyway (it must, by definition, be
an add/add conflict with the whole content conflicting). And
it makes it simpler for the user to recover, as they have no
HEAD to "git reset" back to.
Reported-by: Stefan Schüßler <mail@stefanschuessler.de>
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When commit d09e79c taught git to pull into an unborn
branch, it first updated the unborn branch to point at the
pulled commit, and then used read-tree to update the index
and working tree. That ordering made sense, since any
failure of the latter step would be due to filesystem
errors, and one could then recover with "git reset --hard".
Later, commit 4b3ffe5 added extra safety for existing files
in the working tree by asking read-tree to bail out when it
would overwrite such a file. This error mode is much less
"your pull failed due to random errors" and more like "we
reject this pull because it would lose data". In that case,
it makes sense not to update the HEAD ref, just as a regular
rejected merge would do.
This patch reverses the order of the update-ref and
read-tree calls, so that we do not touch the HEAD ref at all if a
merge is rejected. This also means that we would not update
HEAD in case of a transient filesystem error, but those are
presumably less rare (and one can still recover by repeating
the pull, or by accessing FETCH_HEAD directly).
While we're reorganizing the code, we can drop the "exit 1"
from the end of our command chain. We exit immediately
either way, and just calling exit without an argument will
use the exit code from the last command.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
