If an untracked text file is selected, then its contents are displayed
instead of a diff. If the file is large, then the following hint is
inserted at the top:
* Untracked file is 14774881 bytes.
* Showing only first 131072 bytes.
Why exactly 131072 bytes? With this patch it is 100000 bytes.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This restores functionality of the file icon for unmerged files.
Safety is enforced by loading the diff and checking for lines
that look like conflict markers. If such lines are found, or
the conflict involves deletion and/or symlinks, a confirmation
dialog is presented. Otherwise, the icon immediately stages the
working copy version of the file.
Includes a revert of 2fe5b2ee42
(Restore ability to Stage Working Copy for conflicts)
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Tested-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Add a submenu to allow dynamically changing the encoding to use
for diffs. Encoding settings are remembered while git-gui runs.
The rules are:
1) Encoding set for a specific file overrides gitattributes.
2) Last explicitly set value of the encoding overrides gui.encoding
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Tested-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
- Make diffs and blame default to the system (locale)
encoding instead of hard-coding UTF-8.
- Add a gui.encoding option to allow overriding it.
- gitattributes still have the final word.
The rationale for this is Windows support:
1) Windows people are accustomed to using legacy encodings
for text files. For many of them defaulting to utf-8
will be counter-intuitive.
2) Windows doesn't support utf-8 locales, and switching
the system encoding is a real pain. Thus the option.
This patch also adds proper encoding conversion to Apply Hunk/Line.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Tested-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Most folks using git-gui on internationalized files have complained
that it doesn't recognize UTF-8 correctly. In the past we have just
ignored the problem and showed the file contents as binary/US-ASCII,
which is wrong no matter how you look at it.
This really should be a per-file attribute, managed by .gitattributes,
so we now pull the "encoding" attribute data for the given path from
the .gitattributes (if available) and use that, falling back to UTF-8
if the attributes are unavailable, git-check-attr is broken, or an
encoding for this path not specified.
We apply the encoding anytime we show file content, which currently
is limited to only the diff viewer and the blame viewer.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Languages like Lua and SQL use "--" to mark a line as commented out.
If this appears at column 0 and is part of the pre-image we may see
"--- foo" in the diff, indicating that the line whose content is
"-- foo" has been removed from the new version.
git-gui was incorrectly parsing "--- foo" as the old file name
in the file header, causing it to generate a bad patch file when
the user tried to stage or unstage a hunk or the selected line.
We need to keep track of where we are in the parsing so that we do
not misread a deletion or addition record as part of the header.
Reported-by: Alexander Gladysh <agladysh@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Add special handling for displaying diffs of modified/deleted,
and symlink/mode conflicts. Currently the display is completely
unusable for deciding how to resolve the conflict.
New display modes:
1) Deleted/Modified conflict: e.g.
LOCAL: deleted
REMOTE:
[diff :1:$path :3:$path]
2) Conflict involving symlinks:
LOCAL:
[diff :1:$path :2:$path]
REMOTE:
[diff :1:$path :3:$path]
In order to be able to display multiple diffs, this
patch adds a queue of commands to call.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Generalize the next_diff system, and implement auto-reselection
for merge tool resolution and reshow_diff. Also add auto-selection
of diffs after rescan, if no diff is already selected.
New auto-select rules:
- Rescan auto-selects the first conflicting file, or if none
a modified tracked file, if nothing was selected previously.
- Resolving a conflict auto-selects the nearest conflicting
file, or nothing if everything is resolved.
- Staging the last remaining hunk auto-selects the nearest
modified staged file.
- Staging a file through its icon auto-selects the nearest file.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Support _U (local deleted, remote modified) and
UT (file type changed in conflict) modes.
Note that 'file type changed' does not refer to
changes in the executable bit, instead it denotes
replacing a file with a link, or vice versa.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Staging hunks without context does not work, because line number
information would have to be recomputed for individual hunks.
Since it is already possible to stage individual lines using
'Stage Line for Commit', zero context diffs are not really
necessary for git gui.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
It is especially useful for Stage/Unstage Line, because
they invoke full state scan and diff reload, which originally
would reset the scroll position to the top of the file.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Assume that we want to commit these states:
Old state == HEAD Intermediate state New state
--------------------------------------------------------
context before context before context before
old 1 new 1 new 1
old 2 old 2 new 2
context after context after context after
that is, want to commit two changes in this order:
1. transform "old 1" into "new 1"
2. transform "old 2" into "new 2"
[This discussion and this patch is about this very case and one other case
as outlined below; any other intermediate states that one could imagine are
not affected by this patch.]
Now assume further, that we have not staged and commited anything, but we
have already changed the working file to the new state. Then we will see
this hunk in the "Unstaged Changes":
@@ -1,4 +1,4 @@
context before
-old 1
-old 2
+new 1
+new 2
context after
The obvious way to stage the intermediate state is to apply "Stage This
Line" to "-old 1" and "+new 1". Unfortunately, this resulted in this
intermediate state:
context before
old 2
new 1
context after
which is not what we wanted. In fact, it was impossible to stage the
intermediate state using "Stage Line". The crux was that if a "+" line was
staged, then the "-" lines were converted to context lines and arranged
*before* the "+" line in the forged hunk that we fed to 'git apply'.
With this patch we now treat "+" lines that are staged differently. In
particular, the "-" lines before the "+" block are moved *after* the
staged "+" line. Now it is possible to get the correct intermediate state
by staging "-old 1" and "+new 1". Problem solved.
But there is a catch.
Noticing that we didn't get the right intermediate state by staging
"-old 1" and "+new 1", we could have had the idea to stage the complete
hunk and to *unstage* "-old 2" and "+new 2". But... the result is the same.
The reason is that there is the exact symmetric problem with unstaging the
last "-" and "+" line that are in adjacent blocks of "-" and "+" lines.
This patch does *not* change the way in which "-" lines are *unstaged*.
Why? Because if we did (i.e. move "+" lines before the "-" line after
converting them to context lines), then it would be impossible to stage
this intermediate state:
context before
old 1
new 2
context after
that is, it would be impossible to stage the two independet changes in the
opposite order.
Let's look at this case a bit further: The obvious way to get this
intermediate state would be to apply "Stage This Line" to "-old 2" and
"+new 2". Before this patch, this worked as expected. With this patch, it
does not work as expected, but it can still be achieved by first staging
the entire hunk, then *unstaging* "-old 1" and "+new 1".
In summary, this patch makes a common case possible, at the expense that
a less common case is made more complicated for the user.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
To "Stage/Unstage Line" we construct a patch that contains exactly one
change (either addition or removal); the hunk header was forged by counting
the old side and adjusting the count by +/-1 for the new side. But when we
counted the context we never counted the changed line itself. If the hunk
had only one removal line and one line of context, like this:
@@ -1,3 +1,2 @@
context 1
-removal
context 2
We had constructed this patch:
@@ -1,2 +1,1 @@
context 1
-removal
context 2
which does not apply because git apply deduces that it must apply at the
end of the file. ("context 2" is considered garbage and ignored.) The fix
is that removal lines must be counted towards the context of the old side.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This adds a context menu entry below "Stage/Unstage Hunk" that stages or
unstages just the line under the mouse pointer.
This is by itself useful, for example, if there are unrelated changes in
the same hunk and the hunk cannot be split by reducing the context.
The feature can also be used to split a hunk by staging a number of
additions (or unstaging a number of removals) until there are enough
context lines that the hunk gets split.
The implementation reads the complete hunk that the line lives in, and
constructs a new hunk by picking existing context lines, removing unneeded
change lines and transforming other change lines to context lines. The
resulting hunk is fed through 'git apply' just like in the "Stage/Unstage
Hunk" case.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If we apply a hunk in either direction this may change the file's
status. For example if a file is completely unstaged, and has at
least two hunks in it and the user stages one hunk the file will
change from "Modified, not staged" to "Portions staged for commit".
Resetting the file path causes our trace on this variable to fire;
that trace is used to update the file header in the diff viewer to
the file's current status.
Noticed by Johannes Sixt.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Johannes Sixt pointed out the diff headers "old mode ..." and
"new mode ..." were not being parsed properly by git-gui. We
now include them in the diff viewer for a file.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The Tcl expression "[append [mc Foo] Bar]" does not return the string
"FooBar" after translation; instead it is setting the variable Foo to
the value Bar, or if Foo is already defined it is appending Bar onto
the end of it. This is *not* what we wanted to have happen here.
Tcl's join function is actually the correct function but its default
joinStr argument is a single space. Unfortunately all of our call
sites do not want an extra space added to their string. So we need
a small wrapper function to make the call to join with an empty
join string. In C this is (roughly) the job of the strcat function.
Since strcat is not yet used at the global level it is a reasonable
name to use here.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Most of these changes were suggested by Shawn Pearce in an answer
to Johannes Schindelin.
Some strings for the blame module were added too.
[sp: Minor edits in blame module formatting]
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If `git ls-files --others` returned us the name of a directory then
it is because Git has decided that this directory itself contains a
valid Git repository and its files shouldn't be listed as untracked
for this repository.
In such a case we should label the object as a Git repository and
not just as a directory.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui has a minor problem with regards to symlinks that point
to directories.
git init
mkdir realdir
ln -s realdir linkdir
git gui
Now clicking on file names in the "unstaged changes" window,
there's a problem coming from the "linkdir" symlink: git-gui
complains with
error reading "file4": illegal operation on a directory
...even though git-gui can add that same symlink to the index just
fine.
This patch fix this by adding a check.
[sp: Minor fix to use {link} instead of "link" in condition
and to only open the path if it is not a symlink.]
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The procedure [mc ...] will translate the strings through msgcat.
Strings must be enclosed in quotes, not in braces, because otherwise
xgettext cannot extract them properly, although on the Tcl side both
delimiters would work fine.
[jes: I merged the later patches to that end.]
Signed-off-by: Christian Stimming <stimming@tuhh.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows (which includes Cygwin) Tcl defaults to leaving the EOF
character of input file streams set to the ASCII EOF character, but
if that character were to appear in the data stream then Tcl will
close the channel early. So we have to disable eofchar on Windows.
Since the default is disabled on all platforms except Windows, we
can just disable it everywhere to prevent any sort of read problem.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Rather than making the C library search for git every time we want
to execute it we now search for the main git wrapper at startup, do
symlink resolution, and then always use the absolute path that we
found to execute the binary later on. This should save us some
cycles, especially on stat challenged systems like Cygwin/Win32.
While I was working on this change I also converted all of our
existing pipes ([open "| git ..."]) to use two new pipe wrapper
functions. These functions take additional options like --nice
and --stderr which instructs Tcl to take special action, like
running the underlying git program through `nice` (if available)
or redirect stderr to stdout for capture in Tcl.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I'm really starting to dislike global variables. The ui_status_value
global varible is just one of those that seems to appear in a lot of
code and in many cases we didn't even declare it "global" within the
proc that updates it so we haven't always been getting all of the
updates we expected to see.
This change introduces two new global procs:
ui_status $msg; # Sets the status bar to show $msg.
ui_ready; # Changes the status bar to show "Ready."
The second (special) form is used because we often update the area
with this message once we are done processing a block of work and
want the user to know we have completed it.
I'm not fixing the cases that appear in lib/branch.tcl right now
as I'm actually in the middle of a huge refactoring of that code
to support making a detached HEAD checkout.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Johannes Sixt pointed out that dropping to 0 lines of context
does allow the user to get more fine-grained hunk selection,
especially since we don't currently support "highlight and
apply (or revert)".
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I'm finding it difficult to work with a 6,000+ line Tcl script
and not go insane while looking for a particular block of code.
Since most of the program is organized into different units of
functionality and not all users will need all units immediately
on startup we can improve things by splitting procs out into
multiple files and let auto_load handle things for us.
This should help not only to better organize the source, but
it may also improve startup times for some users as the Tcl
parser does not need to read as much script before it can show
the UI. In many cases the user can avoid reading at least half
of git-gui now.
Unfortunately we now need a library directory in our runtime
location. This is currently assumed to be $(sharedir)/git-gui/lib
and its expected that the Makefile invoker will setup some sort of
reasonable sharedir value for us, or let us assume its going to be
$(gitexecdir)/../share.
We now also require a tclsh (in TCL_PATH) to just run the Makefile,
as we use tclsh to generate the tclIndex for our lib directory. I'm
hoping this is not an unncessary burden on end-users who are building
from source.
I haven't really made any functionality changes here, this is just a
huge migration of code from one file to many smaller files. All of
the new changes are to setup the library path and install the library
files.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
