Since we are now sanity-checking the contents of patches and
refusing to send ones with long lines, this knob provides a
way for the user to override the new behavior (if, e.g., he
knows his SMTP path will handle it).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We try to catch errors early so that we don't end up sending
half of a broken patch series. Right now the only validation
is checking that line-lengths are under the SMTP-mandated
limit of 998.
The validation parsing is very crude (it just checks each
line length without understanding the mailbox format) but
should work fine for this simple check.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We never even look at the command line arguments until after
we have prompted the user for some information. So running
"git send-email" without arguments would prompt for "from"
and "to" headers, only to then die with "No patch files
specified." Instead, let's try to do as much error checking
as possible before getting user input.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently git send-email does not accept $EDITOR with arguments, eg,
emacs -nw, when starting an editor to produce a cover letter. This
patch changes this by letting the shell handle the option parsing.
Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to unconditionally add a message-id to the outgoing
email without bothering to check if it already had one.
Instead, let's use the existing one.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When not prompting, initial_reply_to can be left unset. Do not try to
sanitize it and get useless warning.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
3803bcea tried to fix this, but it only adds the branckes when the given
In-Reply-To begins and ends with whitespaces. It also didn't do anything
to the --in-reply-to argument.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using git-send-email with SMTP authentication sending a patch series
would redundantly authenticate multiple times, once for each patch. In
the worst case, this would actually prevent the series from being sent
because the server would reply with a "5.5.0 Already Authenticated"
status code which would derail the process.
This commit teaches git-send-email to authenticate once and only once at
the beginning of the series.
Signed-off-by: Wincent Colaiuta <win@wincent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We add the content-type header only when we have non-7bit
characters from the 'From' header, so we really need to
specify the encoding (in other cases, where the commit text
needed a content-type, git-format-patch will already have
added the encoding header).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a git newbie, it was confusing to set an In-Reply-To header but then
not see it printed when the git-send-email command was run.
This patch prints all headers that would be sent to sendmail or an SMTP
server instead of only printing From, Subject, Cc, To. It also removes
the now-extraneous Date header after the "Log says" line.
Added test to t/t9001-send-email.sh.
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We sometimes pick out the original rfc822 'From' header and
include it in the body of the message. If the original
author's name needs encoding, then we should specify that in
the content-type header.
If we already had a content-type header in the mail, then we
may need to re-encode. The logic is there to detect
this case, but it doesn't actually do the re-encoding.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Start preparing for 1.5.3.6
git-send-email: Change the prompt for the subject of the initial message.
SubmittingPatches: improve the 'Patch:' section of the checklist
instaweb: Minor cleanups and fixes for potential problems
stop t1400 hiding errors in tests
Makefile: add missing dependency on wt-status.h
refresh_index_quietly(): express "optional" nature of index writing better
Fix sed string regex escaping in module_name.
Avoid a few unportable, needlessly nested "...`...".
git-mailsplit: with maildirs not only process cur/, but also new/
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I never understood what this prompt was asking for until I read the actual
source code. I think this wording is much more understandable.
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some projects prefer to receive patches via a given email address.
In these cases, it's handy to configure that address once.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can use --smtp-server-port option to specify a port
different from the default (typically, SMTP servers listen
to smtp port 25 and ssmtp port 465).
Users should be aware that sending auth info over non-ssl
connections may be unsafe or just may not work at all
depending on SMTP server config.
Signed-off-by: Glenn Rempe <glenn@rempe.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Document ls-files --with-tree=<tree-ish>
git-commit: partial commit of paths only removed from the index
git-commit: Allow partial commit of file removal.
send-email: make message-id generation a bit more robust
git-gui: Disable native platform text selection in "lists"
git-gui: Paper bag fix "Commit->Revert" format arguments
git-gui: Provide 'uninstall' Makefile target to undo an installation
git-gui: Font chooser to handle a large number of font families
git-gui: Make backporting changes from i18n version easier
git-gui: Don't delete send on Windows as it doesn't exist
git-gui: Trim trailing slashes from untracked submodule names
git-gui: Assume untracked directories are Git submodules
git-gui: handle "deleted symlink" diff marker
git-gui: show unstaged symlinks in diff viewer
git-gui: Avoid use of libdir in Makefile
git-gui: Disable Tk send in all git-gui sessions
git-gui: lib/index.tcl: handle files with % in the filename properly
git-gui: Properly set the state of "Stage/Unstage Hunk" action
git-gui: Fix detaching current branch during checkout
git-gui: Correct starting of git-remote to handle -w option
Earlier code took Unix time and appended a few random digits.
If you are firing off many messages within a second, you could
issue the same id to different messages, which is a no-no. If
you send out 31 messages within a single second, with random
integer taken out of rand(4200), you have about 10% chance of
producing the same message ID.
This fixes the problem by uses a prefix string which is
constant-per-invocation (time and pid), with a serial number for
each message generated by the process appended at the end.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
stash: end index commit log with a newline
git-commit: Disallow amend if it is going to produce an empty non-merge commit
git-send-email.perl: Add angle brackets to In-Reply-To if necessary
Fix a test failure (t9500-*.sh) on cygwin
Although message-id by defintion should have surrounding angle
brackets, there is no point forcing people to type them in.
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allows username and password to be given using --smtp-user
and --smtp-pass. SSL use is flagged by --smtp-ssl. These are
backed by corresponding defaults in the git configuration file.
This implements Junio's 'mail identity' suggestion in a slightly
more generalised manner. --identity=$identity, backed by
sendemail.identity indicates that the configuration subsection
[sendemail "$identity"] should take priority over the [sendemail]
section for all configuration values.
Signed-off-by: Douglas Stockwell <doug@11011.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you break out of the prompts presented to you by git send-email
your terminal can be left in an inconsistent state. Here we trap
the interrupt signal and reset the terminal before exiting.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new option allows an arbitrary "cmd" to generate per patch
file specific "Cc:"s.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- when sending several mails I got a slightly different behaviour for the first
mail compared to the second to last one. The reason is that $from was
assigned in line 608 and was not reset when beginning to handle the next
mail.
- Email::Valid can only handle properly quoted real names, so quote arguments
to extract_valid_address.
This patch cleans up variable naming to better differentiate between sender of
the mail and it's author.
Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Email::Valid does respect this considering such a mailbox specification
invalid. b06c6bc831 addressed the issue, but
only if Email::Valid is available.
Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this patch I'm not able to properly send emails as I have a
non-ascii character in my name.
I removed the _rfc822 suffix from the function name as it now does more
than rfc822 quoting.
I dug through rfc822 to do the double quoting right. Only if that is not
possible rfc2047 quoting is applied.
Signed-off-by: Uwe Kleine-K,Av(Bnig <ukleinek@informatik.uni-freiburg.de>
Cc: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pine address book format is tab seperated and the first field
is the nickname/alias and the third field is the email address as
per:
http://www.washington.edu/pine/tech-notes/low-level.html
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These variables let you specify an editor that will be launched in
preference to the EDITOR and VISUAL environment variables. The order
of preference is GIT_EDITOR, core.editor, EDITOR, VISUAL.
[jc: added a test and config variable documentation]
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using git-send-email.perl on a changeset that has:
Cc: <stable@kernel.org>
in the body of the description, and the Email::Valid perl module is
installed on the system, the email address will be deemed "invalid" for
some reason (Email::Valid isn't smart enough to handle this?) and
complain and not send the address the email.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change makes git-send-email's behavior easier to modify by adding config
equivalents for two more of git-send-email's flags.
The mapping of flag to config setting is:
--[no-]supress-from => sendemail.suppressfrom
--[no-]signed-off-cc => sendemail.signedoffcc
It renames the --threaded option to --thread/--no-thread; the
config variable is also called sendemail.thread.
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --threaded option controls whether the In-Reply-To header will be set on
any emails sent. The current behavior is to always set this header, so this
option is most useful in its negated form, --no-threaded. This behavior can
also be controlled through the 'sendemail.threaded' config setting.
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the original $from address fails to yield a valid-looking
e-mail address, we created a bogus looking message ID, formatted
like this:
Message-Id: <11823357623688-git-send-email->
This commit fixes it by moving call to make_message_id() to
where it matters, namely, before the $message_id is needed to be
placed in the generated e-mail header; this has an important
side effect of making it clear that $from is already available.
Also throw in Sys::Hostname::hostname() just for fun, although I
suspect that the code would never trigger due to the modified
call sequence that makes sure $from is always available. This
is based on a suggestion by Michael Hendricks.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes --suppress-from actually work when you're unfortunate enough
to have non-ASCII in your name. Also, if there's a match use the optionally
RFC2047 quoted version from the email.
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
mutt version 1.5.14 (perhaps earlier versions too) permits alias files to have
white space before the 'alias' keyword.
Signed-off-by: Michael Hendricks <michael@ndrix.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch renames config_boolean() to config_bool() for consistency with
the commandline interface and because it is shorter but still obvious. ;-)
It also changes the return value from some obscure string to real Perl
boolean, allowing for clean user code.
Signed-off-by: Petr Baudis <pasky@suse.cz>
* maint:
Start preparing for 1.5.1.3
Sanitize @to recipients.
git-svn: Ignore usernames in URLs in find_by_url
Document --dry-run and envelope-sender for git-send-email.
Allow users to optionally specify their envelope sender.
Ensure clean addresses are always used with Net::SMTP
Validate @recipients before using it for sendmail and Net::SMTP.
Perform correct quoting of recipient names.
Change the scope of the $cc variable as it is not needed outside of send_message.
Debugging cleanup improvements
Prefix Dry- to the message status to denote dry-runs.
Document --dry-run parameter to send-email.
git-svn: Don't rely on $_ after making a function call
Fix handle leak in write_tree
Actually handle some-low memory conditions
Conflicts:
RelNotes
git-send-email.perl
We need to sanitize @to as well to ensure that names are properly quoted.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If your normal user is not the same user you are subscribed to a list with,
then the default envelope sender used will cause your messages to bounce or
silently vanish into the ether.
This patch provides an optional parameter to set the envelope sender.
To use it with the sendmail binary, you must have privileges to use the -f
parameter!
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Always pass in clean addresses to Net::SMTP for the MAIL FROM, and use them on
the SMTP non-quiet output as well.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Ensure that @recipients is only raw addresses when it is handed to the sendmail
binary OR Net::SMTP, otherwise BCC cases might get an extra <, or wierd stuff
might be passed to the exec.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Always perform quoting of the recipient names if they contain periods,
previously only the author's address was treated this way. This stops sendmail
binaries from exploding the name into bad addresses.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
$cc is only used inside the send_message scope, so lets clean it out of the global scope.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
