In three cases in remote.c, a "raw" ref is allocated using alloc_ref()
and then its is constructed using sprintf(). Clean it up by adding a
helper function, alloc_ref_with_prefix(), which creates a composite
name. Use it in alloc_ref_from_str(), too, as it simplifies the code.
Open code alloc_ref() in alloc_ref_with_prefix(), as the former is
going to be removed in the patch after the next.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
t1301-shared-repo.sh: don't let a default ACL interfere with the test
git-check-attr(1): add output and example sections
xdiff-interface.c: strip newline (and cr) from line before pattern matching
t4018-diff-funcname: demonstrate end of line funcname matching flaw
t4018-diff-funcname: rework negated last expression test
Typo "does not exists" when git remote update remote.
remote.c: correct the check for a leading '/' in a remote name
Add testcase to ensure merging an early part of a branch is done properly
Conflicts:
t/t7600-merge.sh
This test creates files with several different umasks and expects their
permissions to be initialized according to the umask, so a default ACL on the
trash directory (which overrides the umask for files created in that directory)
causes the test to fail. To avoid that, remove the default ACL if possible with
setfacl(1).
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Plumbing tools should document what output can be expected.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
POSIX doth sayeth:
"In the regular expression processing described in IEEE Std 1003.1-2001,
the <newline> is regarded as an ordinary character and both a period and
a non-matching list can match one. ... Those utilities (like grep) that
do not allow <newline>s to match are responsible for eliminating any
<newline> from strings before matching against the RE."
Thus far git has not been removing the trailing newline from strings matched
against regular expression patterns. This has the effect that (quoting
Jonathan del Strother) "... a line containing just 'FUNCNAME' (terminated by
a newline) will be matched by the pattern '^(FUNCNAME.$)' but not
'^(FUNCNAME$)'", and more simply not '^FUNCNAME$'.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Since the newline is not removed from lines before pattern matching, a
pattern cannot match to the end of the line using the '$' operator without
using an additional operator which will indirectly match the '\n' character.
Introduce a test which should pass, but which does not due to this flaw.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test used the non-zero exit status of 'git diff' to indicate that a
negated funcname pattern, when placed last, was correctly rejected.
The problem with this is that 'git diff' always returns non-zero if it
finds differences in the files it is comparing, and the files must
contain differences in order to trigger the funcname pattern codepath.
Instead of checking for non-zero exit status, make sure the expected
error message is printed.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test is supposed to disallow remote entries in the config file of the
form:
[remote "/foobar"]
...
The leading slash in '/foobar' is not acceptable.
Instead it was incorrectly testing that the subkey had no leading '/', which
had no effect since the subkey pointer was made to point at a '.' in the
preceding lines.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 969c8775 introduced a test which uses the non-portable construct:
command1 && ! command2 | command3
which must be
command1 && ! (command2 | command3)
to work on bsd shells (this is another example of bbf08124, which fixed
several similar cases).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to the message of commit 0fe7c1de16,
"git diff" with three or more trees expects the merged tree first followed by
the parents, in order. However, this command reversed the order of its
arguments, resulting in confusing diffs. A comment /* Again, the revs are all
reverse */ suggested there was a reason for this, but I can't figure out the
reason, so I removed the reversal of the arguments. Test case included.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Many call sites use strbuf_init(&foo, 0) to initialize local
strbuf variable "foo" which has not been accessed since its
declaration. These can be replaced with a static initialization
using the STRBUF_INIT macro which is just as readable, saves a
function call, and takes up fewer lines.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If verification of path failed, it is always better to print an
error message saying this than relying on the caller function to
print a meaningful error message (especially when the callee already
prints error message for another situation).
Because the callers of add_index_entry_with_check() did not print
any error message, it resulted that the user would not notice the
problem when checkout of an invalid path failed.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The "rebase and edit" howto predates the much easier solution 'git
rebase -i' by two years.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Since dbf5e1e9, the '--no-validate' option is a Getopt::Long boolean
option. The '--no-' prefix (as in --no-validate) for boolean options
is not supported in Getopt::Long version 2.32 which was released with
Perl 5.8.0. This version only supports '--no' as in '--novalidate'.
More recent versions of Getopt::Long, such as version 2.34, support
either prefix. So use the older form in the tests.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We carefully verify that the input to git-apply is sane,
including cross-checking that the filenames we see in "+++"
headers match what was provided on the command line of "diff
--git". When --directory is used, however, we ended up
comparing the unadorned name to one with the prepended root,
causing us to complain about a mismatch.
We simply need to prepend the root directory, if any, when
pulling the name out of the git header.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint:
rebase -i: do not fail when there is no commit to cherry-pick
test-lib: fix color reset in say_color()
fix pread()'s short read in index-pack
Conflicts:
csum-file.c
In case there is no commit to apply (for example because you rebase to
upstream and all your local patches have been applied there), do not
fail. The non-interactive rebase already behaves that way.
Do this by introducing a new command, "noop", which is substituted for
an empty commit list, so that deleting the commit list can still abort
as before.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When executing a single test with colors enabled, the cursor was not set
back to the previous one, and you had to hit an extra enter to get it
back.
Work around this problem by calling 'tput sgr0' before printing the
final newline.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Since v1.6.0.2~13^2~ the completion of a thin pack uses sha1write() for
its ability to compute a SHA1 on the written data. This also provides
data buffering which, along with commit 92392b4a45, will confuse pread()
whenever an appended object is 1) freed due to memory pressure because
of the depth-first delta processing, and 2) needed again because it has
many delta children, and 3) its data is still buffered by sha1write().
Let's fix the issue by simply forcing cached data out when such an
object is written so it can be pread()'d at leisure.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* pb/gitweb:
gitweb: Support for simple project search form
gitweb: Make the by_tag filter delve in forks as well
gitweb: Support for tag clouds
gitweb: Add support for extending the action bar with custom links
gitweb: Sort the list of forks on the summary page by age
gitweb: Clean-up sorting of project list
* mw/sendemail:
bash completion: Add --[no-]validate to "git send-email"
send-email: signedoffcc -> signedoffbycc, but handle both
Docs: send-email: Create logical groupings for man text
Docs: send-email: Create logical groupings for --help text
Docs: send-email: Remove unnecessary config variable description
Docs: send-email: --chain_reply_to -> --[no-]chain-reply-to
send-email: change --no-validate to boolean --[no-]validate
Docs: send-email: Man page option ordering
Docs: send-email usage text much sexier
Docs: send-email's usage text and man page mention same options
* maint:
builtin-apply: fix typo leading to stack corruption
git-stash.sh: fix flawed fix of invalid ref handling (commit da65e7c1)
builtin-merge.c: allocate correct amount of memory
Makefile: do not set NEEDS_LIBICONV for Solaris 8
rebase -i: remove leftover debugging
rebase -i: proper prepare-commit-msg hook argument when squashing
This typo led to stack corruption for lines with whitespace fixes
and length > 1024.
Signed-off-by: Imre Deak <imre.deak@gmail.com>
Looks-good-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The referenced commit tried to fix a flaw in stash's handling of a user
supplied invalid ref. i.e. 'git stash apply fake_ref@{0}' should fail
instead of applying stash@{0}. But, it did so in a naive way by avoiding the
use of the --default option of rev-parse, and instead manually supplied the
default revision if the user supplied an empty command line. This prevented
a common usage scenario of supplying flags on the stash command line (i.e.
non-empty command line) which would be parsed by lower level git commands,
without supplying a specific revision. This should fall back to the default
revision, but now it causes an error. e.g. 'git stash show -p'
The correct fix is to use the --verify option of rev-parse, which fails
properly if an invalid ref is supplied, and still allows falling back to a
default ref when one is not supplied.
Convert stash-drop to use --verify while we're at it, since specifying
multiple revisions for any of these commands is also an error and --verify
makes it so.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This patch just removes an unnecessary goto which makes the code easier
to read and shorter.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Fix two memory allocation errors which allocate space for a pointer
rather than enough space for the structure itself.
This:
struct commit_list *parent = xmalloc(sizeof(struct commit_list *));
should have been this:
struct commit_list *parent = xmalloc(sizeof(struct commit_list));
But while we're at it, change the allocation to reference the
variable it is allocating memory for to try to prevent a similar
mistake, for example if the type is changed, in the future.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Acked-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint:
Do not use errno when pread() returns 0
git init: --bare/--shared overrides system/global config
git-push.txt: Describe --repo option in more detail
git rm: refresh index before up-to-date check
Fix a few typos in relnotes
If we use pread() while at the end of the file, it will return 0, which is
not an error from the operating system point of view. In this case, errno
has not been set and must not be used.
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Many call sites immediately initialize allocated memory with zero after
calling xmalloc. A single call to xcalloc can replace this two-call
sequence.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
