Code clean-up for completion script (in contrib/).
* sg/completion-config:
completion: simplify query for config variables
completion: add a helper function to get config variables
Introduce http.<url>.SSLCipherList configuration variable to tweak
the list of cipher suite to be used with libcURL when talking with
https:// sites.
* ls/http-ssl-cipher-list:
http: add support for specifying an SSL cipher list
The Git subcommand completion (in contrib/) listed credential
helpers among candidates, which is not something the end user would
invoke interatively.
* sg/completion-omit-credential-helpers:
completion: remove credential helpers from porcelain commands
To get the name of all config variables in a given section we perform a
'git config --get-regex' query for all config variables containing the
name of that section, and then filter its output through a case statement
to throw away those that though contain but don't start with the given
section.
Modify the regex to match only at the beginning, so the case statement
becomes unnecessary and we can get rid of it. Add a test to check that a
match in the middle doesn't fool us.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently there are a few completion functions that perform similar 'git
config' queries and filtering to get config variable names: the completion
of pretty aliases, aliases, and remote groups for 'git remote update'.
Unify those 'git config' queries in a helper function to eliminate code
duplication.
Though the helper functions to get pretty aliases and alieses are reduced
to mere one-liner wrappers around the newly added function, keep these
helpers still, because users' completion functions out there might depend
on them. And they keep their callers a tad easier to read, too.
Add tests for the pretty alias and alias helper to show that they work
as before; not for the remote groups query, though, because that's not
extracted into a helper function and it's not worth the effort to do so
for a sole callsite.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The completion for "log --decorate=" parameter value was incorrect.
* sg/complete-decorate-full-not-long:
completion: fix and update 'git log --decorate=' options
Teach git about a new option, "http.sslCipherList", which permits one to
specify a list of ciphers to use when negotiating SSL connections. The
setting can be overwridden by the GIT_SSL_CIPHER_LIST environment
variable.
Signed-off-by: Lars Kellogg-Stedman <lars@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't offer the "main" 'git credential' command or any of the credential
helpers from contrib/credential/ when completing git commands.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git log --decorate=' understands the 'full', 'short' and 'no' options.
From these the completion script only offered 'short' and it offered
'long' instead of 'full'.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During lazy-initialization of the lists of all commands and porcelain
commands the function __git_compute_all_commands() is called twice. The
relevant part of the call sequence looks like this:
__git_compute_porcelain_commands()
__git_compute_all_commands()
<finds list of all commands uninitialized>
__git_list_all_commands()
<initializes list of all commands>
__git_list_porcelain_commands()
__git_compute_all_commands()
<finds list of all commands already initialized, does nothing>
<filters porcelains from list of all commands>
Either one of the two calls could be removed and the initialization of
both command lists would still work as a whole, but let's remove the call
from __git_compute_porcelain_commands(), because this way
__git_list_porcelain_commands() will keep working in itself.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The completion script (in contrib/) contaminated global namespace
and clobbered on a shell variable $x.
* ma/bash-completion-leaking-x:
completion: fix global bash variable leak on __gitcompappend
The completion script (in contrib/) contaminated global namespace
and clobbered on a shell variable $x.
* ma/bash-completion-leaking-x:
completion: fix global bash variable leak on __gitcompappend
The prompt script (in contrib/) did not show the untracked sign
when working in a subdirectory without any untracked files.
* ct/prompt-untracked-fix:
git prompt: use toplevel to find untracked files
The code that reads from the ctags file in the completion script
(in contrib/) did not spell ${param/pattern/string} substitution
correctly, which happened to work with bash but not with zsh.
* js/completion-ctags-pattern-substitution-fix:
contrib/completion: escape the forward slash in __git_match_ctag
The prompt script (in contrib/) did not show the untracked sign
when working in a subdirectory without any untracked files.
* ct/prompt-untracked-fix:
git prompt: use toplevel to find untracked files
The code that reads from the ctags file in the completion script
(in contrib/) did not spell ${param/pattern/string} substitution
correctly, which happened to work with bash but not with zsh.
* js/completion-ctags-pattern-substitution-fix:
contrib/completion: escape the forward slash in __git_match_ctag
Restructure "git push" codepath to make it easier to add new
configuration bits and then add push.followTags configuration that
turns --follow-tags option on by default.
* jk/push-config:
push: allow --follow-tags to be set by config push.followTags
cmd_push: pass "flags" pointer to config callback
cmd_push: set "atomic" bit directly
git_push_config: drop cargo-culted wt_status pointer
We do that almost everywhere, because it's faster for large number of
refs, see a31e62629 (completion: optimize refs completion, 2011-10-15).
These were the last two places where we still used __gitcomp() for
completing refs.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The __git_ps1() prompt function would not show an untracked state
when all the untracked files are outside the current working
directory.
Signed-off-by: Cody A Taylor <codemister99@yahoo.com>
Helped-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current definition results in an incorrect expansion of the term under zsh.
For instance "/^${1////\\/}/" under zsh with the argument "hi" results in:
/^/\/h/\/i/
This results in an output similar to this when trying to complete `git grep
chartab` under zsh:
:: git grep chartabawk: cmd. line:1: /^/\/c/\/h/\/a/\/r/\/t/\/a/\/b/ { print $1 }
awk: cmd. line:1: ^ backslash not last character on line
awk: cmd. line:1: /^/\/c/\/h/\/a/\/r/\/t/\/a/\/b/ { print $1 }
awk: cmd. line:1: ^ syntax error
Leaving the prompt in a goofy state until the user hits a key.
Escaping the literal / in the parameter expansion (using "/^${1//\//\\/}/")
results in:
/^chartab/
allowing the completion to work correctly.
This formulation also works under bash.
Signed-off-by: John Szakmeister <john@szakmeister.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reported-by: "Mladen B." <mladen074@gmail.com>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The __git_remotes() helper function lists the remotes from the config
file by processing the output of a 'git config' query. A simple 'git
remote' produces the exact same output, so run that instead.
Remotes under '$GIT_DIR/remotes' are still listed by running 'ls -1',
because 'git remote' unfortunately ignores them.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log --invert-grep --grep=WIP" will show only commits that do
not have the string "WIP" in their messages.
* cj/log-invert-grep:
log: teach --invert-grep option
Using the exit status of the last command in the prompt, e.g.
PS1='$(__git_ps1) $? ', did not work well because the helper
function stomped on the exit status.
* tf/prompt-preserve-exit-status:
git-prompt: preserve value of $? in all cases
* rh/hide-prompt-in-ignored-directory:
git-prompt.sh: allow to hide prompt for ignored pwd
git-prompt.sh: if pc mode, immediately set PS1 to a plain prompt
"git log --grep=<string>" shows only commits with messages that
match the given string, but sometimes it is useful to be able to
show only commits that do *not* have certain messages (e.g. "show
me ones that are not FIXUP commits").
Originally, we had the invert-grep flag in grep_opt, but because
"git grep --invert-grep" does not make sense except in conjunction
with "--files-with-matches", which is already covered by
"--files-without-matches", it was moved it to revisions structure.
To have the flag there expresses the function to the feature better.
When the newly inserted two tests run, the history would have commits
with messages "initial", "second", "third", "fourth", "fifth", "sixth"
and "Second", committed in this order. The commits that does not match
either "th" or "Sec" is "second" and "initial". For the case insensitive
case only "initial" matches.
Signed-off-by: Christoph Junghans <ottxor@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using the exit status of the last command in the prompt, e.g.
PS1='$(__git_ps1) $? ', did not work well because the helper
function stomped on the exit status.
* tf/prompt-preserve-exit-status:
git-prompt: preserve value of $? inside shell prompt
The top-of-the-file instruction for completion scripts (in contrib/)
did not name the files correctly.
* pd/completion-filenames-fix:
Update documentation occurrences of filename .sh
This option was added in 58794775 (rebase: implement
--[no-]autostash and rebase.autostash, 2013-05-12).
Completion of "--autosquash" has been there, but this was not;
addition of this would require people completing "--autosquash" to
type a bit more than before.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Optionally set __git_ps1 to display nothing when present working
directory is ignored, triggered by the new environment variable
GIT_PS1_HIDE_IF_PWD_IGNORED. This environment variable may be
overridden on any repository by setting bash.hideIfPwdIgnored to
"false". In the absence of GIT_PS1_HIDE_IF_PWD_IGNORED this change
has no effect.
Many people manage e.g. dotfiles in their home directory with git.
This causes the prompt generated by __git_ps1 to refer to that "top
level" repo while working in any descendant directory. That can be
distracting, so this patch helps one shut off that noise.
Signed-off-by: Jess Austin <jess.austin@gmail.com>
Signed-off-by: Richard Hansen <rhansen@bbn.com>
Reviewed-by: Richard Hansen <rhansen@bbn.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At the beginning of __git_ps1, right after determining that the
function is running in pc mode, set PS1 to a plain (undecorated)
prompt. This makes it possible to simply return early without having
to set PS1 if the prompt should not be decorated.
Signed-off-by: Richard Hansen <rhansen@bbn.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git-prompt" (in contrib/) used a variable from the global scope,
possibly contaminating end-user's namespace.
* jg/prompt-localize-temporary:
git-prompt.sh: make $f local to __git_eread()
If you have a prompt which displays the command exit status,
__git_ps1 without this change corrupts it, although it has
the correct value in the parent shell:
~/src/git (master) 0 $ set | grep ^PS1
PS1='\w$(__git_ps1) $? \$ '
~/src/git (master) 0 $ false
~/src/git (master) 0 $ echo $?
1
~/src/git (master) 0 $
There is a slightly ugly workaround:
~/src/git (master) 0 $ set | grep ^PS1
PS1='\w$(x=$?; __git_ps1; exit $x) $? \$ '
~/src/git (master) 0 $ false
~/src/git (master) 1 $
This change makes the workaround unnecessary.
Signed-off-by: Tony Finch <dot@dotat.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation in the completion scripts for Bash and Zsh state the wrong filenames.
Signed-off-by: Peter van der Does <peter@avirtualhome.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function uses (non-local) $f to store the value of its first parameter.
This can interfere with the user's environment.
Signed-off-by: Justin Guenther <jguenther@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add completion for git-tag options including
all options that are currently shown in "git tag -h".
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The thread at http://thread.gmane.org/gmane.comp.version-control.git/257392
details problems when applying patches with "git am" in a repository with
CRLF line endings. In the example in the thread, the repository originated
from "git-svn" so it is not possible to use core.eol and friends on it.
Right now, the best option is to use "git am --keep-cr". However, when
a patch create new files, the patch application process will reject the
new file because it finds a "/dev/null\r" string instead of "/dev/null".
The problem is that SMTP transport is CRLF-unsafe. Sending a patch by
email is the same as passing it through "dos2unix | unix2dos". The newly
introduced CRLFs are normally transparent because git-am strips them. The
keepcr=true setting preserves them, but it is mostly working by chance
and it would be very problematic to have a "git am" workflow in a
repository with mixed LF and CRLF line endings.
The MIME solution to this is the quoted-printable transfer enconding.
This is not something that we want to enable by default, since it makes
received emails horrible to look at. However, it is a very good match
for projects that store CRLF line endings in the repository.
The only disadvantage of quoted-printable is that quoted-printable
patches fail to apply if the maintainer uses "git am --keep-cr". This
is because the decoded patch will have two carriage returns at the end
of the line. Therefore, add support for base64 transfer encoding too,
which makes received emails downright impossible to look at outside
a MUA, but really just works.
The patch covers all bases, including users that still live in the late
80s, by also providing a 7bit content transfer encoding that refuses
to send emails with non-ASCII character in them. And finally, "8bit"
will add a Content-Transfer-Encoding header but otherwise do nothing.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some internal error messages leaked out of the bash completion when
typing "git cmd <TAB>" and the machinery tried to complete
refnames.
* js/completion-hide-not-a-repo:
completion: silence "fatal: Not a git repository" error
