These shell functions are written in an unnecessarily verbose way;
simplify their "conditionally use $<number> after checking $# against
<number>" logic by using shell's built-in conditional substitution
facilities.
Also remove the first of the two assignments to IFS in __gitcomp_nl
that does not have any effect.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This simplifies the code a great deal. In particular, it allows us to
get rid of __git_shopt, which is used only in this fuction to enable
'nullglob' in zsh.
[jn: squashed with a patch that actually gets rid of __git_shopt]
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When listing commands in zsh (git <TAB><TAB>), all of them will show up,
instead of only porcelain ones.
The root cause of this is because zsh versions from 4.3.0 to present
(4.3.15) do not correctly propagate the SH_WORD_SPLIT option into the
subshell in ${foo:=$(bar)} expressions. Because of this bug, the list of
all commands was treated as a single word in __git_list_porcelain_commands
and did not match any of the patterns that would usually cause plumbing to
be excluded.
With problematic versions of zsh, after running
emulate sh
fn () {
var='one two'
for v in $var; do echo $v; done
}
x=$(fn)
: ${y=$(fn)}
printing "$x" results in two lines as expected, but printing "$y" results
in a single line because $var is expanded as a single word when evaluating
fn to compute y.
So avoid the construct, and use an explicit 'test -n "$foo" || foo=$(bar)'
instead.
[jn: clarified commit message, indentation style fix]
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
zsh adds a backslash (foo\ ) for each item in the COMPREPLY array if IFS
doesn't contain spaces. This issue has been reported[1], but there is no
solution yet.
This wasn't a problem due to another bug[2], which was fixed in zsh
version 4.3.12. After this change, 'git checkout ma<tab>' would resolve
to 'git checkout master\ '.
Aditionally, the introduction of __gitcomp_nl in commit a31e626
(completion: optimize refs completion) in git also made the problem
apparent, as Matthieu Moy reported.
The simplest and most generic solution is to hide all the changes we do
to IFS, so that "foo \nbar " is recognized by zsh as "foo bar". This
works on versions of git before and after the introduction of
__gitcomp_nl (a31e626), and versions of zsh before and after 4.3.12.
Once zsh is fixed, we should conditionally disable this workaround to
have the same benefits as bash users.
[1] http://www.zsh.org/mla/workers/2012/msg00053.html
[2] http://zsh.git.sourceforge.net/git/gitweb.cgi?p=zsh/zsh;a=commitdiff;h=2e25dfb8fd38dbef0a306282ffab1d343ce3ad8d
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use the 'read' command without -r, so that it treats '\' as an
escape character, in several places. This breaks the loop reading
refnames from git-for-each-ref in __git_refs() if there are refnames
such as "foo'bar", in which case for-each-ref helpfully quotes them as
$ git update-ref "refs/remotes/test/foo'bar" HEAD
$ git for-each-ref --shell --format="ref=%(refname:short)" "refs/remotes"
ref='test/foo'\''bar'
Interpolating the \' here will read "ref='test/foo'''bar'" instead, and
eval then chokes on the unbalanced quotes.
However, since none of the read loops _want_ to have backslashes
interpolated, it's much safer to use read -r everywhere.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sg/complete-refs:
completion: remove broken dead code from __git_heads() and __git_tags()
completion: fast initial completion for config 'remote.*.fetch' value
completion: improve ls-remote output filtering in __git_refs_remotes()
completion: query only refs/heads/ in __git_refs_remotes()
completion: support full refs from remote repositories
completion: improve ls-remote output filtering in __git_refs()
completion: make refs completion consistent for local and remote repos
completion: optimize refs completion
completion: document __gitcomp()
Conflicts:
contrib/completion/git-completion.bash
Commit e5b8eebc (completion: fix issue with process substitution not
working on Git for Windows, 2011-10-26) introduced a new variable in
__git_ps1_show_upstream(), but didn't declare it as local to prevent it
from leaking into the environment.
We may want to rewrite it like the following, but that can wait until the
next cycle.
while read key value
do
...
done <<-EOF
$(git config -z --get-regexp ...)
EOF
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git for Windows comes with a bash that doesn't support process substitution.
It issues the following error when using git-completion.bash with
GIT_PS1_SHOWUPSTREAM set:
$ export GIT_PS1_SHOWUPSTREAM=1
sh.exe": cannot make pipe for process substitution: Function not implemented
sh.exe": cannot make pipe for process substitution: Function not implemented
sh.exe": <(git config -z --get-regexp '^(svn-remote\..*\.url|bash\.showupstream)$' 2>/dev/null | tr '\0\n' '\n '): ambiguous redirect
Replace the process substitution with a 'here string'.
Signed-off-by: Stefan Naewe <stefan.naewe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
__git_heads() was introduced in 5de40f5 (Teach bash about
git-repo-config., 2006-11-27), and __git_tags() in 88e21dc (Teach bash
about completing arguments for git-tag, 2007-08-31). As their name
suggests, __git_heads() is supposed to list only branches, and
__git_tags() only tags.
Since their introduction both of these functions consist of two
distinct parts. The first part gets branches or tags, respectively,
from a local repositoty using 'git for-each-ref'. The second part
queries a remote repository given as argument using 'git ls-remote'.
These remote-querying parts are broken in both functions since their
introduction, because they list both branches and tags from the remote
repository. (The 'git ls-remote' query is not limited to list only
heads or tags, respectively, and the for loop filtering the query
results prints everything except dereferenced tags.) This breakage
could be easily fixed by passing the '--heads' or '--tags' options or
appropriate refs patterns to the 'git ls-remote' invocations.
However, that no one noticed this breakage yet is probably not a
coincidence: neither of these two functions were used to query a
remote repository, the remote-querying parts were dead code already
upon thier introduction and remained dead ever since.
Since those parts of code are broken, are and were never used, stop
the bit-rotting and remove them.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refspecs for branches in a remote repository start with 'refs/heads/',
so completing those refspecs with 'git config remote.origin.fetch
<TAB>' always offers 'refs/heads/' first, because that's the unique
part of the possible refspecs. But it does so only after querying the
remote with 'git ls-remote', which can take a while when the request
goes through some slower network to a remote server.
Don't waste the user's time and offer 'refs/heads/' right away for
'git config remote.origin.fetch <TAB>'.
The reason for putting 'refs/heads/' directly into COMPREPLY instead
of using __gitcomp() is to avoid __gitcomp() adding a trailing space.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This follows suit of a previous patch for __git_refs(): use a
while-read loop and let bash's word splitting get rid of object names
from 'git ls-remote's output.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
__git_refs_remotes() is used to provide completion for refspecs to set
'remote.*.fetch' config variables for branches on the given remote.
So it's really only interested in refs under 'refs/heads/', but it
queries the remote for all its refs and then filters out all refs
outside of 'refs/heads/'.
Let 'git ls-remote' do the filtering.
Also remove the unused $cmd variable from __git_refs_remotes().
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the __git_refs() completion helper function lists refs from a
local repository, it usually lists the refs' short name, except when
it needs to provide completion for words starting with refs, because
in that case it lists full ref names, see 608efb87 (bash: complete
full refs, 2008-11-28).
Add the same functionality to the code path dealing with remote
repositories, too.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The remote-handling part of __git_refs() has a nice for loop and state
machine case statement to iterate over all words from the output of
'git ls-remote' to identify object names and ref names. Since each
line in the output of 'git ls-remote' consists of an object name and a
ref name, we can do more effective filtering by using a while-read
loop and letting bash's word splitting take care of object names.
This way the code is easier to understand and the loop will need only
half the number of iterations than before.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For a local repository the __git_refs() completion helper function
lists refs under 'refs/(tags|heads|remotes)/', plus some special refs
like HEAD and ORIG_HEAD. For a remote repository, however, it lists
all refs.
Fix this inconsistency by specifying refs filter patterns for 'git
ls-remote' to only list refs under 'refs/(tags|heads|remotes)/'.
For now this makes it impossible to complete refs outside of
'refs/(tags|heads|remotes)/' in a remote repository, but a followup
patch will resurrect that.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After a unique command or option is completed, in most cases it is a
good thing to add a trailing a space, but sometimes it doesn't make
sense, e.g. when the completed word is an option taking an argument
('--option=') or a configuration section ('core.'). Therefore the
completion script uses the '-o nospace' option to prevent bash from
automatically appending a space to unique completions, and it has the
__gitcomp() function to add that trailing space only when necessary.
See 72e5e989 (bash: Add space after unique command name is completed.,
2007-02-04), 78d4d6a2 (bash: Support unique completion on git-config.,
2007-02-04), and b3391775 (bash: Support unique completion when
possible., 2007-02-04).
__gitcomp() therefore iterates over all possible completion words it
got as argument, and checks each word whether a trailing space is
necessary or not. This is ok for commands, options, etc., i.e. when
the number of words is relatively small, but can be noticeably slow
for large number of refs. However, while options might or might not
need that trailing space, refs are always handled uniformly and always
get that trailing space (or a trailing '.' for 'git config
branch.<head>.'). Since refs listed by __git_refs() & co. are
separated by newline, this allows us some optimizations with
'compgen'.
So, add a specialized variant of __gitcomp() that only deals with
possible completion words separated by a newline and uniformly appends
the trailing space to all words using 'compgen -S " "' (or any other
suffix, if specified), so no iteration over all words is needed. But
we need to fiddle with IFS, because the default IFS containing a space
would cause the added space suffix to be stripped off when compgen's
output is stored in the COMPREPLY array. Therefore we use only
newline as IFS, hence the requirement for the newline-separated
possible completion words.
Convert all callsites of __gitcomp() where it's called with refs, i.e.
when it gets the output of either __git_refs(), __git_heads(),
__git_tags(), __git_refs2(), __git_refs_remotes(), or the odd 'git
for-each-ref' somewhere in _git_config(). Also convert callsites
where it gets other uniformly handled newline separated word lists,
i.e. either remotes from __git_remotes(), names of set configuration
variables from __git_config_get_set_variables(), stashes, or commands.
Here are some timing results for dealing with 10000 refs.
Before:
$ refs="$(__git_refs ~/tmp/git/repo-with-10k-refs/)"
$ time __gitcomp "$refs"
real 0m1.134s
user 0m1.060s
sys 0m0.130s
After:
$ time __gitcomp_nl "$refs"
real 0m0.373s
user 0m0.360s
sys 0m0.020s
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I always forget which argument is which, and got tired of figuring it
out over and over again.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A common thing to grep for is the name of a symbol. This
patch teaches the completion for "git grep" to look in
a 'tags' file, if present, to complete a pattern. For
example, in git.git:
$ make tags
$ git grep get_sha1<Tab><Tab>
get_sha1 get_sha1_oneline
get_sha1_1 get_sha1_with_context
get_sha1_basic get_sha1_with_context_1
get_sha1_hex get_sha1_with_mode
get_sha1_hex_segment get_sha1_with_mode_1
get_sha1_mb
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document the namespace mechanism in a new gitnamespaces(7) page.
Reference it from receive-pack and upload-pack.
Document the new --namespace option and GIT_NAMESPACE environment
variable in git(1), and reference gitnamespaces(7).
Add a sample Apache configuration to http-backend(1) to support
namespaced repositories, and reference gitnamespaces(7).
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for dividing the refs of a single repository into multiple
namespaces, each of which can have its own branches, tags, and HEAD.
Git can expose each namespace as an independent repository to pull from
and push to, while sharing the object store, and exposing all the refs
to operations such as git-gc.
Storing multiple repositories as namespaces of a single repository
avoids storing duplicate copies of the same objects, such as when
storing multiple branches of the same source. The alternates mechanism
provides similar support for avoiding duplicates, but alternates do not
prevent duplication between new objects added to the repositories
without ongoing maintenance, while namespaces do.
To specify a namespace, set the GIT_NAMESPACE environment variable to
the namespace. For each ref namespace, git stores the corresponding
refs in a directory under refs/namespaces/. For example,
GIT_NAMESPACE=foo will store refs under refs/namespaces/foo/. You can
also specify namespaces via the --namespace option to git.
Note that namespaces which include a / will expand to a hierarchy of
namespaces; for example, GIT_NAMESPACE=foo/bar will store refs under
refs/namespaces/foo/refs/namespaces/bar/. This makes paths in
GIT_NAMESPACE behave hierarchically, so that cloning with
GIT_NAMESPACE=foo/bar produces the same result as cloning with
GIT_NAMESPACE=foo and cloning from that repo with GIT_NAMESPACE=bar. It
also avoids ambiguity with strange namespace paths such as
foo/refs/heads/, which could otherwise generate directory/file conflicts
within the refs directory.
Add the infrastructure for ref namespaces: handle the GIT_NAMESPACE
environment variable and --namespace option, and support iterating over
refs in a namespace.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The core.abbrevguard config variable had removed and
now core.abbrev has been used instead. Teach it.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mk/grep-pcre:
git-grep: Fix problems with recently added tests
git-grep: Update tests (mainly for -P)
Makefile: Pass USE_LIBPCRE down in GIT-BUILD-OPTIONS
git-grep: update tests now regexp type is "last one wins"
git-grep: do not die upon -F/-P when grep.extendedRegexp is set.
git-grep: Bail out when -P is used with -F or -E
grep: Add basic tests
configure: Check for libpcre
git-grep: Learn PCRE
grep: Extract compile_regexp_failed() from compile_regexp()
grep: Fix a typo in a comment
grep: Put calls to fixmatch() and regmatch() into patmatch()
contrib/completion: --line-number to git grep
Documentation: Add --line-number to git-grep synopsis
* sg/completion-updates:
Revert "completion: don't declare 'local words' to make zsh happy"
git-completion: fix regression in zsh support
completion: move private shopt shim for zsh to __git_ namespace
completion: don't declare 'local words' to make zsh happy
The zsh support of git-completion script in contrib/ is broken for current
versions of zsh, and does not notice when there's a subcommand.
For example: "git log origi<TAB>" gives no completions because it would
try to find a "git origi..." command. This will be fixed by zsh 4.3.12,
but for now we can workaround it by backporting the same fix as zsh folks
implemented.
The problem started after commit v1.7.4-rc0~11^2~2 (bash: get
--pretty=m<tab> completion to work with bash v4), which introduced
_get_comp_words_by_ref() that comes from bash-completion[1] scripts, and
relies on the 'words' variable.
However, it turns out 'words' is a special variable used by zsh
completion. From zshcompwid(1):
[...] the parameters are reset on each function exit (including nested
function calls from within the completion widget) to the values they had
when the function was entered.
As a result, subcommand words are lost. Ouch.
This is now fixed in the latest master branch of zsh[2] by simply defining
'words' as hidden (typeset -h), which removes the special meaning inside
the emulated bash function. So let's do the same.
Jonathan Nieder helped on the commit message.
[1] http://bash-completion.alioth.debian.org/
[2] http://zsh.git.sourceforge.net/git/gitweb.cgi?p=zsh/zsh;a=commitdiff;h=e880604f029088f32fb1ecc39213d720ae526aaa
Reported-by: Stefan Haller <lists@haller-berlin.de>
Comments-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch teaches git-grep the --perl-regexp/-P options (naming
borrowed from GNU grep) in order to allow specifying PCRE regexes on the
command line.
PCRE has a number of features which make them more handy to use than
POSIX regexes, like consistent escaping rules, extended character
classes, ungreedy matching etc.
git isn't build with PCRE support automatically. USE_LIBPCRE environment
variable must be enabled (like `make USE_LIBPCRE=YesPlease`).
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most zsh users probably probably do not expect a custom shopt function
to enter their environment just because they ran "source
~/.git-completion.sh".
Such namespace pollution makes development of other scripts confusing
(because it makes the bash-specific shopt utility seem to be available
in zsh) and makes git's tab completion script brittle (since any other
shell snippet implementing some other subset of shopt will break it).
Rename the shopt shim to the more innocuous __git_shopt to be a good
citizen (with two underscores to avoid confusion with completion rules
for a hypothetical "git shopt" command).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "-n" option of "git grep" gained a synonym "--line-number" with
commit 7d6cb10b ("grep: Add the option '--line-number'", 2011-03-28).
Teach bash-completion about it.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "_get_comp_words_by_ref -n := words" command from the
bash_completion library reassembles a modified version of COMP_WORDS
with ':' and '=' no longer treated as word separators and stores it in
the ${words[@]} array. Git's programmable tab completion script uses
this to abstract away the difference between bash v3's and bash v4's
definitions of COMP_WORDS (bash v3 used shell words, while bash v4
breaks at separator characters); see v1.7.4-rc0~11^2~2 (bash: get
--pretty=m<tab> completion to work with bash v4, 2010-12-02).
zsh has (or rather its completion functions have) another idea about
what ${words[@]} should contain: the array is prepopulated with the
words from the command it is completing. For reasons that are not
well understood, when git-completion.bash reserves its own "words"
variable with "local words", the variable becomes empty and cannot be
changed from then on. So the completion script neglects the arguments
it has seen, and words complete like git subcommand names. For
example, typing "git log origi<TAB>" gives no completions because
there are no "git origi..." commands.
However, when this words variable is not declared as local but is just
populated by _get_comp_words_by_ref() and then read in various
completion functions, then zsh seems to be happy about it and our
completion script works as expected.
So, to get our completion script working again under zsh and to
prevent the words variable from leaking into the shell environment
under bash, we will only declare words as local when using bash.
Reported-by: Stefan Haller <lists@haller-berlin.de>
Suggested-by: Felipe Contreras <felipe.contreras@gmail.com>
Explained-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In v1.7.4-rc0~11^2~2 (bash: get --pretty=m<tab> completion to work
with bash v4, 2010-12-02) we started to use _get_comp_words_by_ref()
to access completion-related variables. That was large change, and to
make it easily reviewable, we invoked _get_comp_words_by_ref() in each
completion function and systematically replaced every occurance of
bash's completion-related variables ($COMP_WORDS and $COMP_CWORD) with
variables set by _get_comp_words_by_ref().
This has the downside that _get_comp_words_by_ref() is invoked several
times during a single completion. The worst offender is perhaps 'git
log mas<TAB>': during the completion of 'master'
_get_comp_words_by_ref() is invoked no less than six times.
However, the variables $prev, $cword, and $words provided by
_get_comp_words_by_ref() are not modified in any of the completion
functions, and the previous commit ensures that the $cur variable is
not modified as well. This makes it possible to invoke
_get_comp_words_by_ref() to get those variables only once in our
toplevel completion functions _git() and _gitk(), and all other
completion functions will inherit them.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since v1.7.4-rc0~11^2~2 (bash: get --pretty=m<tab> completion to work
with bash v4, 2010-12-02) we use _get_comp_words_by_ref() to access
completion-related variables, and the $cur variable holds the word
containing the current cursor position in all completion functions.
This $cur variable is left unchanged in most completion functions;
there are only four functions modifying its value, namely __gitcomp(),
__git_complete_revlist_file(), __git_complete_remote_or_refspec(), and
_git_config().
If this variable were never modified, then it would allow us a nice
optimisation and cleanup. Therefore, this patch assigns $cur to an
other local variable and uses that for later modifications in those
four functions.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If bashcompinit has not already been autoloaded, do so
automatically, as it is required to properly parse the
git-completion file with ZSH.
Helped-by: Felipe Contreras
Signed-off-by: Marius Storm-Olsen <mstormo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mg/rev-list-n-parents:
tests: avoid nonportable {foo,bar} glob
rev-list --min-parents,--max-parents: doc, test and completion
revision.c: introduce --min-parents and --max-parents options
t6009: use test_commit() from test-lib.sh
This also adds test for "--merges" and "--no-merges" which we did not
have so far.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enable bash completion for "git help <alias>", analogous to "git
<alias>", which was already implemented.
Signed-off-by: Jakob Pfender <jpfender@elegosoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While doing a final sanity check before merging a topic Bsomething, it
is a good idea to review what damage Bsomething branch would make, by
running:
$ git diff ...Bsomething
Unfortunately, our completion script for 'git diff' doesn't offer
anything after '...'. This is because 'git diff's completion function
invokes __git_complete_file() for non-option arguments to complete the
'<tree>:<path>' extended SHA-1 notation, but this helper function
doesn't support refs after '...' or '..'. Completion of refs after
'...' or '..' is supported by the __git_complete_revlist() helper
function, but that doesn't support '<tree>:<path>'.
To support both '...<ref>' and '<tree>:<path>' notations for 'git
diff', this patch, instead of adding yet another helper function,
joins __git_complete_file() and __git_complete_revlist() into the new
common function __git_complete_revlist_file(). The old helper
functions __git_complete_file() and __git_complete_revlist() are
changed to be a direct wrapper around the new
__git_complete_revlist_file(), because they might be used in
user-supplied completion scripts and we don't want to break them.
This change will cause some wrong suggestions for other commands which
use __git_complete_file() ('git diff' and friends) or
__git_complete_revlist() ('git log' and friends), e.g. 'git diff
...master:Doc<TAB>' and 'git log master:Doc<TAB>' will complete the
path to 'Documentation/', although neither commands make any sense.
However, both of these were actively wrong to begin with as soon as
the user entered the ':', so there is no real harm done.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Tested-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the git prompt (when enabled) show a CHERRY-PICKING indicator
when we are in the middle of a conflicted cherry-pick, analogous
to the existing MERGING and BISECTING flags.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* pd/bash-4-completion:
bash: simple reimplementation of _get_comp_words_by_ref
bash: get --pretty=m<tab> completion to work with bash v4
Conflicts:
contrib/completion/git-completion.bash
Quite a few configuration variables have been added since 226b343
(completion: add missing configuration variables to _git_config(),
2009-05-03). Add these variables to the Bash completion script.
Also remove the obsolete 'add.ignore-errors' and
'color.grep.external', as well as 'diff.renameLimit.', which never
existed and rename the misspelled 'sendemail.aliasesfiletype'.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"Promote" the reflog command out of plumbing, so that we now run
completion for it. After all, it's listed under porcelain (ancillary),
and we do run completion for those commands.
Add basic completion for the three subcommands - show, expire, delete.
Try completing refs for these too.
Helped-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' (early part): (529 commits)
completion: fix zsh check under bash with 'set -u'
Fix copy-pasted comments related to tree diff handling.
Git 1.7.3.2
{cvs,svn}import: use the new 'git read-tree --empty'
t/t9001-send-email.sh: fix stderr redirection in 'Invalid In-Reply-To'
Clarify and extend the "git diff" format documentation
git-show-ref.txt: clarify the pattern matching
documentation: git-config minor cleanups
Update test script annotate-tests.sh to handle missing/extra authors
Better advice on using topic branches for kernel development
Documentation: update implicit "--no-index" behavior in "git diff"
Documentation: expand 'git diff' SEE ALSO section
Documentation: diff can compare blobs
Documentation: gitrevisions is in section 7
fast-import: Allow filemodify to set the root
shell portability: no "export VAR=VAL"
CodingGuidelines: reword parameter expansion section
Documentation: update-index: -z applies also to --index-info
gitweb: Improve behavior for actionless path_info gitweb URLs
gitweb: Fix bug in evaluate_path_info
...
Conflicts:
GIT-VERSION-GEN
RelNotes
contrib/completion/git-completion.bash
Add a minimal implementation of _get_comp_words_by_ref so
$ git show head:g <tab><tab>
on bash 4 can complete paths within the head commit without requiring
the bash_completion functions to be loaded. This is a follow-up to
the previous patch (bash: get --pretty=m<tab> completion to work with
bash v4).
Based on bash-completion 2.x (commit bf763033, 2010-10-26) but tweaked
for simplicity and to allow zsh to parse the code.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Improved-by: SZEDER Gábor <szeder@ira.uka.de>
Bash's programmable completion provides the COMP_WORDS array variable,
which holds the individual words in the current command line. In bash
versions prior to v4 "words are split on shell metacharacters as the
shell parser would separate them" (quote from bash v3.2.48's man
page). This behavior has changed with bash v4, and the command line
"is split into words as readline would split it, using COMP_WORDBREAKS
as" "the set of characters that the readline library treats as word
separators" (quote from bash v4's man page).
Since COMP_WORDBREAKS contains the characters : and = by default, this
behavior change in bash affects git's completion script. For example,
before bash 4, running
$ git log --pretty=m <tab><tab>
would give a list of pretty-printing formats starting with 'm' but now
it completes on branch names.
It would be possible to work around this by removing '=' and ':' from
COMP_WORDBREAKS, but as noticed in v1.5.6.4~9^2 (bash completion:
Resolve git show ref:path<tab> losing ref: portion, 2008-07-15), that
would break *other* completion scripts. The bash-completion library
includes a better workaround: the _get_comp_words_by_ref function
re-assembles a copy of COMP_WORDS, excluding a collection of word
separators of the caller's choice. Use it.
As a bonus, this also improves behavior when tab is pressed with the
cursor in the middle of a word.
To avoid breaking setups with the bash-completion library not already
loaded, if the _get_comp_words_by_ref function is not defined then a
shim that just reads COMP_WORDS will be used instead (no change from
the current behavior in that case).
Signed-off-by: Peter van der Does <peter@avirtualhome.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Explained-by: SZEDER Gábor <szeder@ira.uka.de>
* maint:
add: introduce add.ignoreerrors synonym for add.ignore-errors
bash: Match lightweight tags in prompt
git-commit.txt: (synopsis): move -i and -o before "--"
* maint-1.7.2:
add: introduce add.ignoreerrors synonym for add.ignore-errors
bash: Match lightweight tags in prompt
git-commit.txt: (synopsis): move -i and -o before "--"
The bash prompt would display a commit's object name when having checked
out a lightweight tag. Provide `--tags` to `git describe` in the completion
script, so it will display lightweight tag names, as it already does for
annotated tags.
Signed-off-by: Daniel Knittl-Frank <knittl89+git@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sg/completion:
bash: support pretty format aliases
bash: support more 'git notes' subcommands and their options
bash: not all 'git bisect' subcommands make sense when not bisecting
bash: offer refs for 'git bisect start'
Commit 06f44c3 (completion: make compatible with zsh) broke bash
compatibility with 'set -u': a warning was generated when checking
$ZSH_VERSION. The solution is to supply a default value, using
${ZSH_VERSION-}. Thanks to SZEDER Gábor for the fix.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since commit 70c9ac2 (DWIM: "git checkout frotz" to "git checkout
-b frotz origin/frotz"), git checkout has supported a DWIM mode where
it creates a local tracking branch for a remote branch if just the name
of the remote branch is specified on the command-line and only one remote
has a branch with that name. Teach the bash completion script to understand
this DWIM mode and provide such remote-tracking branch names as possible
completions.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users can have their own pretty format aliases since 8028184 (pretty:
add aliases for pretty formats, 2010-05-02), so let's offer those
after '--pretty=' and '--format=' for 'log' and 'show', too.
Similar to the completion of aliases, this will invoke 'git config'
each time pretty aliases needs to be completed, so changes in pretty.*
configuration will be reflected immediately.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current completion function for 'git notes' only supported the
'edit' and 'show' subcommands and none of their options. This patch
adds support for all missing subcommands, options, and their arguments
(files or refs), if any.
The code responsible for completing subcommand looks different
compared to the completion functions of other git commands with
subcommands. This is because of the '--ref <notes-ref>' option which
comes before the subcommand (i.e. git notes --ref <notes-ref> add).
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
... but only 'start' and 'replay'. The other commands will either
error out or offer to start bisecting for the user.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The completion script only offered path completion after 'git bisect
start', although bad and good refs could also be specified before the
doubledash.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Modify git-completion.bash so that it also works with zsh when using
bashcompinit. In particular:
declare -F
Zsh doesn't have the same 'declare -F' as bash, but 'declare -f'
is the same, and it works just as well for our purposes.
${var:2}
Zsh does not implement ${var:2} to skip the first 2 characters, but
${var#??} works in both shells to replace the first 2 characters
with nothing. Thanks to Jonathan Nieder for the suggestion.
for (( n=1; "$n" ... ))
Zsh does not allow "$var" in arithmetic loops. Instead, pre-compute
the endpoint and use the variables without $'s or quotes.
shopt
Zsh uses 'setopt', which has a different syntax than 'shopt'. Since
'shopt' is used infrequently in git-completion, we provide
a bare-bones emulation.
emulate -L bash
KSH_TYPESET
Zsh offers bash emulation, which turns on a set of features to
closely resemble bash. In particular, this enables SH_WORDSPLIT,
which splits scalar variables on word boundaries in 'for' loops.
We also need to set KSH_TYPESET, to fix "local var=$(echo foo bar)"
issues.
The last set of options are turned on only in _git and _gitk. Some of
the sub-functions may not work correctly if called directly.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a notification in the command prompt specifying whether (and optionally how
far) your branch has diverged from its upstream. This is especially helpful in
small teams that very frequently (forget to) push to each other.
Support git-svn upstream detection as a special case, as migrators from
centralised version control systems are especially likely to forget to push.
Support for other types of upstream than SVN should be easy to add if anyone is
so inclined.
Signed-off-by: Andrew Sayers <andrew-git@pileofstuff.org>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Define several variables in __git_ps1 to avoid errors under "set -u" semantics.
__git_ps1 seems to have been missed when the rest of the file was fixed in
25a31f8.
Signed-off-by: Andrew Sayers <andrew-git@pileofstuff.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update git-completion.bash with new --orphan option to 'git checkout'.
Signed-off-by: Erick Mattos <erick.mattos@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already complete HEAD, of course, and might as well complete the other
common refs mentioned in the rev-parse man page: FETCH_HEAD, ORIG_HEAD, and
MERGE_HEAD.
Signed-off-by: Ian Ward Comfort <icomfort@stanford.edu>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitk aliases either start with "!gitk", or look something like "!sh -c
FOO=bar gitk", IOW they contain the "gitk" word. With this patch the
completion script will recognize these cases and will offer gitk's
options.
Just like the earlier change improving on aliased command recognition,
this change can also be fooled easily by some complex aliases, but
users of such aliases could remedy it with custom completion
functions.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shell command aliases can get rather complex, and the completion
script can not always determine correctly the git command invoked by
such an alias. For such cases users might want to provide custom
completion scripts the same way like for their custom commands made
possible by the previous patch.
The current completion script does not allow this, because if it
encounters an alias, then it will unconditionally perform completion
for the aliased git command (in case it can determine the aliased git
command, of course). With this patch the completion script will first
search for a completion function for the command given on the command
line, be it a git command, a custom git command of the user, or an
alias, and invoke that function to perform the completion. This has
no effect on git commands, because they can not be aliased anyway. If
it is an alias and there is a completion function for that alias (e.g.
_git_foo() for the alias 'foo'), then it will be invoked to perform
completion, allowing users to provide custom completion functions for
aliases. If such a completion function can not be found, only then
will the completion script check whether the command given on the
command line is an alias or not, and proceed as usual (i.e. find out
the aliased git command and provide completion for it).
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The bash completion script already provides support to complete
aliases, options and refs for aliases (if the alias can be traced back
to a supported git command by __git_aliased_command()), and the user's
custom git commands, but it does not support the options of the user's
custom git commands (of course; how could it know about the options of
a custom git command?). Users of such custom git commands could
extend git's bash completion script by writing functions to support
their commands, but they might have issues with it: they might not
have the rights to modify a system-wide git completion script, and
they will need to track and merge upstream changes in the future.
This patch addresses this by providing means for users to supply
custom completion scriplets for their custom git commands without
modifying the main git bash completion script.
Instead of having a huge hard-coded list of command-completion
function pairs (in _git()), the completion script will figure out
which completion function to call based on the command's name. That
is, when completing the options of 'git foo', the main completion
script will check whether the function '_git_foo' is declared, and if
declared, it will invoke that function to perform the completion. If
such a function is not declared, it will fall back to complete file
names. So, users will only need to provide this '_git_foo' completion
function in a separate file, source that file, and it will be used the
next time they press TAB after 'git foo '.
There are two git commands (stage and whatchanged), for which the
completion functions of other commands were used, therefore they
got their own completion function.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To support completion for aliases, the completion script tries to
figure out which git command is invoked by an alias. Its
implementation in __git_aliased_command() is rather straightforward:
it returns the first word from the alias. For simple aliases starting
with the git command (e.g. alias.last = cat-file commit HEAD) this
gives the right results. Unfortunately, it does not work with shell
command aliases, which can get rather complex, as illustrated by one
of Junio's aliases:
[alias]
lgm = "!sh -c 'GIT_NOTES_REF=refs/notes/amlog git log \"$@\" || :' -"
In this case the current implementation returns "!sh" as the aliased
git command, which is obviosly wrong.
The full parsing of a shell command alias like that in the completion
code is clearly unfeasible. However, we can easily improve on aliased
command recognition by eleminating stuff that is definitely not a git
command: shell commands (anything starting with '!'), command line
options (anything starting with '-'), environment variables (anything
with a '=' in it), and git itself. This way the above alias would be
handled correctly, and the completion script would correctly recognize
"log" as the aliased git command.
Of course, this solution is not perfect either, and could be fooled
easily. It's not hard to construct an alias, in which a word does not
match any of these filter patterns, but is still not a git command
(e.g. by setting an environment variable to a value which contains
spaces). It may even return false positives, when the output of a git
command is piped into an other git command, and the second gets the
command line options via $@, but options for the first one are
offered. However, the following patches will enable the user to
supply custom completion scripts for aliases, which can be used to
remedy these problematic cases.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
... and it will offer refs unless after -m or -F, because these two
options require a non-ref argument.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since commits a2d725b7 (Use an external program to implement fetching
with curl, 2009-08-05) and c9e388bb (Make the
"traditionally-supported" URLs a special case, 2009-09-03) remote
transport helpers like 'remote-ftp' and 'remote-curl' are offered by the
completion script as available subcommands. Not good, since they are
helpers, therefore should not be offered, so filter them out.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.6.5:
Git 1.6.5.8
Fix mis-backport of t7002
bash completion: factor submodules into dirty state
reset: unbreak hard resets with GIT_WORK_TREE
Conflicts:
Documentation/git.txt
GIT-VERSION-GEN
RelNotes
In the implementation of GIT_PS1_SHOWDIRTYSTATE in 738a94a (bash:
offer to show (un)staged changes, 2009-02-03), I cut&pasted the
git-diff invocations from dirty-worktree checks elsewhere, carrying
along the --ignore-submodules option.
As pointed out by Kevin Ballard, this doesn't really make sense: to
the _user_, a changed submodule counts towards uncommitted changes.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve the readability of the bash prompt by adding a space between
the branch name and the status flags (dirty, stash, untracked).
While we are cleaning up this section of code, the two cases for
formatting the prompt are identical except for the format string,
so make them the same.
Suggested-by: Roman Fietze <roman.fietze@telemotive.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support the new options --all, --prune, and --dry-run for
'git fetch'.
As the --multiple option was primarily introduced to enable
'git remote update' to be re-implemented in terms of 'git fetch'
(16679e37) and is not likely to be used much from the command
line, it does not seems worthwhile to complicate the code
(to support completion of multiple remotes) to handle it.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I just wanted to add the recently learnt '--reset-author' option, but
then noticed that there are many more options missing. This patch
adds support for all of 'git commit's options, except '--allow-empty',
because it is primarily there for foreign scm interfaces.
Furthermore, this patch also adds support for completing the arguments
of those options that take a non-filename argument: valid modes are
offered for '--cleanup' and '--untracked-files', while refs for
'--reuse-message' and '--reedit-message', because these two take a
commit as argument.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since git is not used in each and every interactive xterm, it
seems best to load completion support with cold caches and then
load each needed thing lazily. This has most of the speed
advantage of pre-generating everything at build time, without the
complication of figuring out at build time what commands will be
available at run time.
On this slow laptop, this decreases the time to load
git-completion.bash from about 500 ms to about 175 ms.
Suggested-by: Kirill Smelkov <kirr@mns.spb.ru>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Cc: Stephen Boyd <bebarino@gmail.com>
Cc: SZEDER Gábor <szeder@ira.uka.de>
Cc: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add p4merge to the set of built-in diff/merge tools, and update
bash completion and documentation.
Signed-off-by: Scott Chacon <schacon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So complete refs, files after the double-dash and some diff options that
make sense for difftool.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Complete all long options for 'git rebase' except --no-verify
(probably used very seldom) and the long options corresponding
to -v, -q, and -f.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before the --, always attempt ref completion. This helps with
entering the <treeish> arguments to git-grep. As a bonus, you can
work around git-grep's current lack of --all by hitting M-*, ugly as
the resulting command line may be.
Strictly speaking, completing the regular expression argument (or
option argument) makes no sense. However, we cannot prevent _all_
completion (it will fall back to filenames), so we dispense with any
additional complication to detect whether the user still has to enter
a regular expression.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Aliases with newlines have been a problem since commit 56fc25f (Bash
completion support for remotes in .git/config., 2006-11-05). The chance
of the problem occurring has been slim at best, until commit 518ef8f
(completion: Replace config --list with --get-regexp, 2009-09-11)
removed the case statement introduced by commit 56fc25f. Before removing
the case statement, most aliases with newlines would work unless they
were specially crafted as follows
[alias]
foo = "log -1 --pretty='format:%s\nalias.error=broken'"
After removing the case statement, a more benign alias like
[alias]
whowhat = "log -1 --pretty='format:%an <%ae>\n%s'"
wont-complete = ...
would cause the completion to break badly.
For now, revert the removal of the case statement until someone comes up
with a better way to get keys from git-config.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After commit 511a3fc (wrap git's main usage string., 2009-09-12), the
bash completion for git commands includes COMMAND and [ARGS] when it
shouldn't. Fix this by grepping more strictly for a line with git
commands. It's doubtful whether git will ever have commands starting
with anything besides numbers and letters so this should be fine. At
least by being stricter we'll know when we break the completion earlier.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git am learned --scissors, git commit learned --dry-run and git log
learned --decorate=long|short recently.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This update adds 'git stash (apply|pop) --quiet' and all options known
to 'git stash save', and handles the DWIMery from 3c2eb80f (stash:
simplify defaulting to "save" and reject unknown options, 2009-08-18).
Care is taken to avoid offering subcommands in the DWIM case.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
__git_find_subcommand() was originally meant to check whether
subcommands are already present on the command line. But the code is
general enough to be used for checking the presence of command line
options as well, and the next commit will use it for that purpose, so
let's give it a more general name.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
James Bardin noted that the completion spewed warnings when no git config
file is present. This is likely a bug to be fixed in git config, but it's
also good to simplify the completion code by using the --get-regexp option
as Jeff King pointed out.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Trivially-acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This configuration option allows systematically rewriting fetch-only URLs
to push-capable URLs when used with push. For instance:
[url "ssh://example.org/"]
pushInsteadOf = "git://example.org/"
This will allow clones of "git://example.org/path/to/repo" to subsequently
push to "ssh://example.org/path/to/repo", without manually configuring
pushurl for that remote.
Includes documentation for the new option, bash completion updates, and
test cases (both that pushInsteadOf applies to push, that it does not
apply to fetch, and that it is ignored when pushURL is already defined).
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce --ignore-whitespace option and corresponding config bool to
ignore whitespace differences while applying patches, akin to the
'patch' program.
'git am', 'git rebase' and the bash git completion are made aware of
this option.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Added the envvar GIT_PS1_SHOWUNTRACKEDFILES to 'git-completion.bash'.
When set to a nonempty value, then the char '%' will be shown next
to the branch name in the bash prompt.
Signed-off-by: Daniel Trstenjak <daniel.trstenjak@science-computing.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is useful to grep directories non-recursively, e.g. when one wants to
look for all files in the toplevel directory, but not in any subdirectory,
or in Documentation/, but not in Documentation/technical/.
This patch adds support for --max-depth <depth> option to git-grep. If it is
given, git-grep descends at most <depth> levels of directories below paths
specified on the command line.
Note that if path specified on command line contains wildcards, this option
makes no sense, e.g.
$ git grep -l --max-depth 0 GNU -- 'contrib/*'
(note the quotes) will search all files in contrib/, even in
subdirectories, because '*' matches all files.
Documentation updates, bash-completion and simple test cases are also
provided.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
... so it's available for git log, shortlog and gitk.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 0065236 (bash completion: complete variable names for "git
config" with options 2009-05-08) implemented its config variable search
wrong. When a config contains a value with a space and a period (.) in
it, completion erroneously thinks that line in the configuration is
multiple config variables.
For example
$ cat .git/config
format.cc = Junio C Hamano <gitster@pobox.com>
$ git config --unset <TAB>
format.cc
<gitster@pobox.com>
Instead of using a for loop splitting across spaces, pipe each line to a
while read loop and beef up the case statement to match only
'config.variable=value'.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update to include branch.*.rebase, remote.*.pushurl, and
add.ignore-errors
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For another patch series I'm working on I needed some tests
for the cc-cmd feature of git-send-email.
This patch adds 3 tests for the feature and for the possibility
to specify --suppress-cc multiple times, and fixes two bugs.
The first bug is that the --suppress-cc option for `cccmd' was
misspelled as `ccmd' in the code. The second bug, which is
actually found only with my other series, is that the argument
to the cccmd is never quoted, so the cccmd would fail with
patch file names containing a space.
A third bug I fix (in the docs) is that the bodycc argument was
actually spelled ccbody in the documentation and bash completion.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Cc: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a '$' in the __git_ps1 output to show stashed changes are present,
when GIT_PS1_SHOWSTASHSTATE is set to a nonempty value.
The code for checking if the stash has entries is taken from
'git-stash.sh'.
Signed-off-by: Daniel Trstenjak <daniel.trstenjak@online.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recent commits 8763dbb1 (completion: fix PS1 display during a
merge on detached HEAD, 2009-05-16), ff790b6a (completion: simplify
"current branch" in __git_ps1(), 2009-05-10), and d7107ca6
(completion: fix PS1 display during an AM on detached HEAD,
2009-05-26) ensure that the branch name in __git_ps1() is always set
to something sensible. Therefore, the condition for checking the
non-empty branch name is always fulfilled, and can be removed.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a companion patch to previous 8763dbb (completion: fix PS1 display
during a merge on detached HEAD, 2009-05-16). While rebasing or running am
on a detached HEAD, the code failed to set $b (branch description) that
enables the whole status display business.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Araxis merge is now a built-in diff/merge tool.
This adds araxis to git-completion and updates
the documentation to mention araxis.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
grep: fix word-regexp colouring
completion: use git rev-parse to detect bare repos
Cope better with a _lot_ of packs
for-each-ref: fix segfault in copy_email
Its check is more robust than a config check for core.bare
Trivially-Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mh/show-branch-color:
bash completion: show-branch color support
show-branch: color the commit status signs
Conflicts:
contrib/completion/git-completion.bash
* maint:
completion: add missing options to show-branch and show
dir.c: clean up handling of 'path' parameter in read_directory_recursive()
Fix type-punning issues
Add --oneline and --abbrev-commit to show and --sparse to show-branch.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
test: checkout shouldn't say that HEAD has moved if it didn't
completion: enhance "current branch" display
completion: simplify "current branch" in __git_ps1()
completion: fix PS1 display during a merge on detached HEAD
builtin-checkout: Don't tell user that HEAD has moved before it has
pre-commit.sample: don't print incidental SHA1
tests: Add tests for missing format-patch long options
api-parse-options.txt: use 'func' instead of 'funct'
Turn on USE_ST_TIMESPEC for OpenBSD
ls-tree manpage: output of ls-tree is compatible with update-index
ls-tree manpage: use "unless" instead of "when ... is not"
Introduce GIT_PS1_DESCRIBE option you can set to "contains", "branch", or
"describe" to tweak the way how a detached HEAD is described.
The default behaviour is to describe only exact match with some tag
(otherwise use the first 7 hexdigits) as before.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As I very often work on a detached HEAD, I found it pretty confusing
when __git_ps1() said 'some-name'. Did I create a branch with that name
by mistake, or do I happen to be on a commit with that exact tag?
This patch fixes the issue by enclosing non branch names in a pair of
parentheses when used to substitute %s token in __git_ps1() argument.
It also fixes a small bug where the branch part is left empty when
.git/HEAD is unreadable for whatever reason. The output now says
"(unknown)".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If your merge stops in a conflict while on a detached HEAD, recent
completion code fails to show anything. This was because various cases
added to support the operation-in-progress markers (e.g. REBASE, MERGING)
forgot that they need to set the variable "b" to something for the result
they computed to be displayed at all.
Probably not many people make trial merges on a detached HEAD (which is
tremendously useful feature of git, by the way), and that may be why this
was not noticed for a long time.
Acked-By: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes it easier for users to get and unset their configuration
variables without having to open documentation or dig through their
configuration file.
__git_config_get_set_variables() retrieves the set configuration
variables from the appropriate configuration file. For example, if
the user has previously specified --global only the global variables
are returned. The same applies for --system, and --file. If no
location has been specified, all set variables are returned.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add completion for --confirm, --suppress-cc, and --smtp-encryption
command line arguments. Add completion for aliasfiletype and confirm
configuration variables.
Since --smtp-ssl is deprecated, replace it with --smtp-encryption and
the two options ssl and tls.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add raw to the date formats too.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This implements completion of --color and --no-color for "git
show-branch" and color.showbranch for "git config".
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* da/difftool:
mergetool--lib: simplify API usage by removing more global variables
Fix misspelled mergetool.keepBackup
difftool/mergetool: refactor commands to use git-mergetool--lib
mergetool: use $( ... ) instead of `backticks`
bash completion: add git-difftool
difftool: add support for a difftool.prompt config variable
difftool: add various git-difftool tests
difftool: move 'git-difftool' out of contrib
difftool/mergetool: add diffuse as merge and diff tool
difftool: add a -y shortcut for --no-prompt
difftool: use perl built-ins when testing for msys
difftool: remove the backup file feature
difftool: remove merge options for opendiff, tkdiff, kdiff3 and xxdiff
git-mergetool: add new merge tool TortoiseMerge
git-mergetool/difftool: make (g)vimdiff workable under Windows
doc/merge-config: list ecmerge as a built-in merge tool
This adds completion for difftool's --tool flag.
The known diff tool names were also consolidated into
a single variable.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds diffuse as a built-in merge tool.
Signed-off-by: Sebastian Pipping <sebastian@pipping.org>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds --committer-date-is-author-date, --ignore-date, and --no-utf8
options. The --binary option is removed, as it was made a no-op by
cb3a160. The option list is also sorted alphabetically.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This can be used in GUIs to open installed HTML documentation in the
browser.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Update draft release notes to 1.6.2.2
Fix bash completion in path with spaces
bash completion: only show 'log --merge' if merging
git-tag(1): add hint about commit messages
Documentation: update graph api example.
* maint-1.6.1:
Fix bash completion in path with spaces
bash completion: only show 'log --merge' if merging
git-tag(1): add hint about commit messages
Documentation: update graph api example.
Conflicts:
contrib/completion/git-completion.bash
* maint-1.6.0:
Fix bash completion in path with spaces
bash completion: only show 'log --merge' if merging
git-tag(1): add hint about commit messages
Documentation: update graph api example.
Signed-off-by: Daniel Cheng (aka SDiZ) <j16sdiz+freenet@gmail.com>
Trivially-acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The gitk completion only shows --merge if MERGE_HEAD is present.
Do it the same way for git-log completion.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Trivially-Acked-By: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Trivially-Acked-By: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Trivially-Acked-By: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --staged option (synonym for --cached) isn't listed in the
completion choices for git diff. This tiny patch adds it.
Trivially-Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/remote-improvements: (23 commits)
builtin-remote.c: no "commented out" code, please
builtin-remote: new show output style for push refspecs
builtin-remote: new show output style
remote: make guess_remote_head() use exact HEAD lookup if it is available
builtin-remote: add set-head subcommand
builtin-remote: teach show to display remote HEAD
builtin-remote: fix two inconsistencies in the output of "show <remote>"
builtin-remote: make get_remote_ref_states() always populate states.tracked
builtin-remote: rename variables and eliminate redundant function call
builtin-remote: remove unused code in get_ref_states
builtin-remote: refactor duplicated cleanup code
string-list: new for_each_string_list() function
remote: make match_refs() not short-circuit
remote: make match_refs() copy src ref before assigning to peer_ref
remote: let guess_remote_head() optionally return all matches
remote: make copy_ref() perform a deep copy
remote: simplify guess_remote_head()
move locate_head() to remote.c
move duplicated ref_newer() to remote.c
move duplicated get_local_heads() to remote.c
...
Conflicts:
builtin-clone.c
fetch, pull, and push didn't know their options. They do now. merge's
options are factored into a variable so they can be shared between
_git_merge and _git_pull
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to complete --strategy was duplicated between _git_rebase and
_git_merge, and is about to gain a third caller (_git_pull). This patch
factors it into its own function.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sverre Rabbelier noticed a completion issue with push:
$ git push ori<tab>
git push origin
$ git push -f ori<tab>
git push -f origin/
Markus Heidelberg pointed out that the issue extends to fetch and pull.
The reason is that the current code naively assumes that if
COMP_CWORD=2, it should complete a remote name, otherwise it should
complete a refspec. This assumption fails if there are any --options.
This patch fixes that issue by instead scanning COMP_CWORDS to see if
the remote has been completed yet (we now assume the first non-dashed
argument is the remote). The new logic is factored into a function,
shared by fetch, pull, and push.
The new function also properly handles '.' as the remote.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ns/pretty-format:
bash completion: add --format= and --oneline options for "git log"
Add tests for git log --pretty, --format and --oneline.
Add --oneline that is a synonym to "--pretty=oneline --abbrev-commit"
Give short-hands to --pretty=tformat:%formatstring
Add --format that is a synonym to --pretty
* tp/completion:
Fixup: Add bare repository indicator for __git_ps1
Add bare repository indicator for __git_ps1
completion: More fixes to prevent unbound variable errors
completion: Better __git_ps1 support when not in working directory
completion: Use consistent if [...] convention, not "test"
completion: For consistency, change "git rev-parse" to __gitdir calls
Provide a porcelain command for setting and deleting
$GIT_DIR/remotes/<remote>/HEAD.
While we're at it, document what $GIT_DIR/remotes/<remote>/HEAD is all
about.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We also add --format= completion for "git show".
Signed-off-by: Teemu Likonen <tlikonen@iki.fi>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Marius Storm-Olsen <git@storm-olsen.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prefixes the branch name with "BARE:" if you're in a
bare repository.
Signed-off-by: Marius Storm-Olsen <git@storm-olsen.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The gitk completion only shows --merge if MERGE_HEAD is present.
Do it the same way for git-log completion.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor options that are useful for more than one of them into a
variable used by the relevant completions. This has the effect of
adding the following options to git-log:
--branches --tags --remotes --first-parent --dense --sparse
--simplify-merges --simplify-by-decoration --first-parent
--no-merges
The following to git-shortlog:
--branches --tags --remotes --first-parent
And the following to gitk:
--branches --tags --remotes --first-parent --no-merges --max-count=
--max-age= --since= --after= --min-age= --until= --before= --dense
--sparse --full-history --simplify-merges --simplify-by-decoration
--left-right
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git svn' got some new subcommands and otions in the last couple of
months. This patch adds completion support for them.
In particular:
* 'fetch', 'clone', etc.: '--ignore-paths='
* 'init' and 'clone': '--prefix=', '--use-log-author',
'--add-author-from'
* 'dcommit': '--commit-url', '--revision'
* 'log': '--color'
* 'rebase': '--dry-run'
* 'branch', 'tag', 'blame', 'migrate' subcommands and their options
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Namely: '--commit', '--stat', '--no-squash', '--ff', '--no-ff'.
One might wonder why add options that specify the default behaviour
anyway (e.g. '--commit', '--no-squash', etc.). Users can override the
default with config options (e.g. 'branch.<name>.mergeoptions',
'merge.log'), but sometimes might still need the default behaviour.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Several functions make use of "[-n ...]" and "[-z ...]". In many cases,
the variables being tested were declared with "local."
However, several __variables are not, and so they must be replaced with
their ${__-} equivalents.
Signed-off-by: Ted Pavlic <ted@tedpavlic.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If .git/HEAD is not readable, __git_ps1 does nothing.
If --is-in-git-dir, __git_ps1 returns " (GIT_DIR!)" as a cautionary
note. The previous behavior would show the branch name (and would
optionally attempt to determine the dirtyState of the directory, which
was impossible because a "git diff" was used).
If --is-in-work-tree, __git_ps1 returns the branch name. Additionally,
if showDirtyState is on, the dirty state is displayed.
Signed-off-by: Ted Pavlic <ted@tedpavlic.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The local coding convention in bash completion is to use [...] rather
than test. Additionally,
if [...]; then
is preferred over
if [...]
then
and so matching "if [...]\nthen" were changed accordingly.
Signed-off-by: Ted Pavlic <ted@tedpavlic.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a bit of code to __git_ps1 that lets it append '*' to the branch
name if there are any unstaged changes, and '+' if there are any
staged changes.
Since this is a rather expensive operation and will force a lot of
data into the cache whenever you first enter a repository, you have to
enable it manually by setting GIT_PS1_SHOWDIRTYSTATE to a nonempty
value. The configuration variable bash.showDirtyState can then be
used to disable it again for some repositories.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff, log and show all take the same diff options. Refactor them from
__git_diff and __git_log into a variable, and complete them in
__git_show too.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the options --pickaxe-all and --pickaxe-regex to git-log, where
they make more sense than with git-diff.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default git-svn stores timestamps of fetched commits in
Subversion's UTC format. Passing --localtime to fetch will convert
them to the timezone of the server on which git-svn is run.
This makes the timestamps of a resulting "git log" agree with what
"svn log" shows for the same repository.
Signed-off-by: Pete Harlan <pgit@pcharlan.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Both 'git log' and 'show' have the same '--pretty=<format>' option
with the same formats. So refactor these formats into a common
variable.
While at it, also add 'format:' to the list.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
__gitcomp takes care of it since 5447aac7 (bash: fix long option with
argument double completion, 2008-03-05)
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a few simple comments above commands that take arguments. These
comments are meant to remind developers of potential problems that
can occur when the script is sourced on systems with "set -u." Any
function which requires arguments really ought to be called with
explicit arguments given.
Also adds a #!bash to the top of bash completions so that editing
software can always identify that the file is of sh type.
Signed-off-by: Ted Pavlic <ted@tedpavlic.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a git completion is not found, a bash shell should try bash-type
completions first before going to standard filetype completions. This
patch adds "-o bashdefault" to the completion line. If that option is
not available, it uses the old method.
This behavior was inspired by Mercurial's bash completion script.
Signed-off-by: Ted Pavlic <ted@tedpavlic.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Under "set -u" semantics, it is an error to access undefined variables.
Some user environments may enable this setting in the interactive shell.
In any context where the completion functions access an undefined
variable, accessing a default empty string (aka "${1-}" instead of "$1")
is a reasonable way to code the function, as it silences the undefined
variable error while still supplying an empty string.
In this patch, functions that should always take an argument still use
$1. Functions that have optional arguments use ${1-}.
Signed-off-by: Ted Pavlic <ted@tedpavlic.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Lee Marlow <lee.marlow@gmail.com>
Trivially-Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Lee Marlow <lee.marlow@gmail.com>
Trivially-Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge two hunks if there is only the specified number of otherwise unshown
context between them. For --inter-hunk-context=1, the resulting patch has
the same number of lines but shows uninterrupted context instead of a
context header line in between.
Patches generated with this option are easier to read but are also more
likely to conflict if the file to be patched contains other changes.
This patch keeps the default for this option at 0. It is intended to just
make the feature available in order to see its advantages and downsides.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add 'normal' to config color options.
Add 'mergeoptions' to branch config options.
Add 'proxy' and 'mirror' to remote config options.
Signed-off-by: Lee Marlow <lee.marlow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sort the config variables to make sync-ing them with
Documents/config.txt easier in the future.
Signed-off-by: Lee Marlow <lee.marlow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
sha1_file.c: resolve confusion EACCES vs EPERM
sha1_file: avoid bogus "file exists" error message
git checkout: don't warn about unborn branch if -f is already passed
bash: offer refs instead of filenames for 'git revert'
bash: remove dashed command leftovers
git-p4: fix keyword-expansion regex
fast-export: use an unsorted string list for extra_refs
Add new testcase to show fast-export does not always exports all tags
The completion script for 'git revert' currently offers options and
filenames. However, 'git revert' doesn't take any filenames from the
command line, but a single commit. Therefore, it's more sane to offer
refs instead.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes it's handy to complete full refs, e.g. the user has some
refs outside of refs/{heads,remotes,tags} or the user wants to
complete some git command's special refs (like 'git show
refs/bisect/bad').
To do that, we check whether the ref to be completed starts with
'refs/' or is 'refs' (to reduce the risk of matching 'refs-'). If it
does, then we offer full refs for completion; otherwise everything
works as usual.
This way the impact on the common case is fairly small (hopefully not
many users have branches or tags starting with 'refs'), and in the
special case the cost of typing out 'refs' is bearable.
While at it, also remove the unused 'cmd' variable from '__git_refs'.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 5a625b07 (bash: remove fetch, push, pull dashed form leftovers,
2008-10-03) did that already, but there were still some git-cmd left
here and there.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-svn: change dashed git-commit-tree to git commit-tree
Documentation: clarify information about 'ident' attribute
bash completion: add doubledash to "git show"
Use test-chmtime -v instead of perl in t5000 to get mtime of a file
Add --verbose|-v to test-chmtime
asciidoc: add minor workaround to add an empty line after code blocks
Plug a memleak in builtin-revert
Add file delete/create info when we overflow rename_limit
Install git-cvsserver in $(bindir)
Install git-shell in bindir, too
Completion for new workflow documentation introduced in f948dd8
Signed-off-by: Lee Marlow <lee.marlow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mw/sendemail:
bash completion: Add --[no-]validate to "git send-email"
send-email: signedoffcc -> signedoffbycc, but handle both
Docs: send-email: Create logical groupings for man text
Docs: send-email: Create logical groupings for --help text
Docs: send-email: Remove unnecessary config variable description
Docs: send-email: --chain_reply_to -> --[no-]chain-reply-to
send-email: change --no-validate to boolean --[no-]validate
Docs: send-email: Man page option ordering
Docs: send-email usage text much sexier
Docs: send-email's usage text and man page mention same options
* maint:
Update release notes for 1.6.0.3
Teach rebase -i to honor pre-rebase hook
docs: describe pre-rebase hook
do not segfault if make_cache_entry failed
make prefix_path() never return NULL
fix bogus "diff --git" header from "diff --no-index"
Fix fetch/clone --quiet when stdout is connected
builtin-blame: Fix blame -C -C with submodules.
bash: remove fetch, push, pull dashed form leftovers
Conflicts:
diff.c
We don't provide complation for git-commands in dashed form anymore,
so there is no need to keep those cases.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Tested-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Using this format simplifies the code for completing refs and (in some
cases) improves performance significantly.
For repositories like the current git.git (with more than 200 refs)
there is no real performance difference, but for a repository with 2000
refs the total time needed to complete the refs is reduced by ~25% (from
around 400ms to around 305ms).
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-log-grep:
log --author/--committer: really match only with name part
diff --cumulative is a sub-option of --dirstat
bash completion: Hide more plumbing commands
git <tab><tab> still shows way too many commands, some of them
are clearly plumbing. This patch hides the plumbing commands
liberally (that is, in special cases, users still might want to
call one of the hidden commands, a *normal* workflow should never
involve these, though - and if it does, we have a UI problem anyway).
Signed-off-by: Petr Baudis <pasky@suse.cz>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git-merge" is a binary executable these days, and looking for assignment
to $all_strategies variable with grep/sed does not work well.
When asked for an unknown strategy, pre-1.6.0 and post-1.6.0 "git merge"
commands respectively say:
$ $HOME/git-snap-v1.5.6.5/bin/git merge -s help
available strategies are: recur recursive octopus resolve stupid ours subtree
$ $HOME/git-snap-v1.6.0/bin/git merge -s help
Could not find merge strategy 'help'.
Available strategies are: recursive octopus resolve ours subtree.
both on their standard error stream. We can use this to learn what
strategies are supported.
The sed script is written in such a way that it catches both old and new
message styles ("Available" vs "available", and the full stop at the end).
It also allows future versions of "git merge" to line-wrap the list of
strategies, and add extra comments, like this:
$ $HOME/git-snap-v1.6.1/bin/git merge -s help
Could not find merge strategy 'help'.
Available strategies are: blame recursive octopus resolve ours
subtree.
Also you have custom strategies: theirs
Make sure you spell strategy names correctly.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git allows access to the gitattributes man page via `git help attributes`,
but this is not discoverable via the bash-completion mechanism. This
patch adds all current non-command man pages to the completion candidate
list.
Signed-off-by: Marcus Griep <marcus@griep.us>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --tool= long option to "git mergetool" can be completed with:
kdiff3 tkdiff meld xxdiff emerge
vimdiff gvimdiff ecmerge opendiff
Signed-off-by: Lee Marlow <lee.marlow@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bring completion up to date with the man page.
Signed-off-by: Eric Raible <raible@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It will never trigger anyway because of the first check, and even if it
would, it would not offer the command line option.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add completions for all long options specified in the docs
--dry-run
Signed-off-by: Lee Marlow <lee.marlow@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add completions for all long options specified in the docs
--cached --deleted --modified --others --ignored
--stage --directory --no-empty-directory --unmerged
--killed --exclude= --exclude-from=
--exclude-per-directory= --exclude-standard
--error-unmatch --with-tree= --full-name
--abbrev --ignored --exclude-per-directory
Signed-off-by: Lee Marlow <lee.marlow@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add completions for all long options specified in the docs
--format= --list --verbose
--prefix= --remote= --exec=
The --format= long option can be completed with available formats
and the --remote= can be completed with defined remote repositories.
Signed-off-by: Lee Marlow <lee.marlow@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add branch subcommand to completions and USAGE for git-stash.sh.
Complete stash names for show, apply, drop, pop, and branch.
Add "--index" long option for apply.
Signed-off-by: Lee Marlow <lee.marlow@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add completions for all long options specified in the docs
--edit --mainline --no-edit --no-commit --signoff
Signed-off-by: Lee Marlow <lee.marlow@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add completions for all long options specified in the docs
--quiet --bare --template= --shared
--shared={false|true|umask|group|all|world|everybody}
Signed-off-by: Lee Marlow <lee.marlow@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
