One of the most common uses of git_path() is to pass a
constant, like git_path("MERGE_MSG"). This has two
drawbacks:
1. The return value is a static buffer, and the lifetime
is dependent on other calls to git_path, etc.
2. There's no compile-time checking of the pathname. This
is OK for a one-off (after all, we have to spell it
correctly at least once), but many of these constant
strings appear throughout the code.
This patch introduces a series of functions to "memoize"
these strings, which are essentially globals for the
lifetime of the program. We compute the value once, take
ownership of the buffer, and return the cached value for
subsequent calls. cache.h provides a helper macro for
defining these functions as one-liners, and defines a few
common ones for global use.
Using a macro is a little bit gross, but it does nicely
document the purpose of the functions. If we need to touch
them all later (e.g., because we learned how to change the
git_dir variable at runtime, and need to invalidate all of
the stored values), it will be much easier to have the
complete list.
Note that the shared-global functions have separate, manual
declarations. We could do something clever with the macros
(e.g., expand it to a declaration in some places, and a
declaration _and_ a definition in path.c). But there aren't
that many, and it's probably better to stay away from
too-magical macros.
Likewise, if we abandon the C preprocessor in favor of
generating these with a script, we could get much fancier.
E.g., normalizing "FOO/BAR-BAZ" into "git_path_foo_bar_baz".
But the small amount of saved typing is probably not worth
the resulting confusion to readers who want to grep for the
function's definition.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are no callers of the slightly-dangerous static-buffer
git_path_submodule left. Let's drop it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git_path function has "git_pathdup" and
"strbuf_git_path" variants, but git_submodule_path only
comes in the dangerous, static-buffer variant. That makes
refactoring callers to use the safer functions hard (since
they don't exist).
Since we're already using a strbuf behind the scenes, it's
easy to expose all three of these interfaces with thin
wrappers.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up for xdg configuration path support.
* pt/xdg-config-path:
path.c: remove home_config_paths()
git-config: replace use of home_config_paths()
git-commit: replace use of home_config_paths()
credential-store.c: replace home_config_paths() with xdg_config_home()
dir.c: replace home_config_paths() with xdg_config_home()
attr.c: replace home_config_paths() with xdg_config_home()
path.c: implement xdg_config_home()
A replacement for contrib/workdir/git-new-workdir that does not
rely on symbolic links and make sharing of objects and refs safer
by making the borrowee and borrowers aware of each other.
* nd/multiple-work-trees: (41 commits)
prune --worktrees: fix expire vs worktree existence condition
t1501: fix test with split index
t2026: fix broken &&-chain
t2026 needs procondition SANITY
git-checkout.txt: a note about multiple checkout support for submodules
checkout: add --ignore-other-wortrees
checkout: pass whole struct to parse_branchname_arg instead of individual flags
git-common-dir: make "modules/" per-working-directory directory
checkout: do not fail if target is an empty directory
t2025: add a test to make sure grafts is working from a linked checkout
checkout: don't require a work tree when checking out into a new one
git_path(): keep "info/sparse-checkout" per work-tree
count-objects: report unused files in $GIT_DIR/worktrees/...
gc: support prune --worktrees
gc: factor out gc.pruneexpire parsing code
gc: style change -- no SP before closing parenthesis
checkout: clean up half-prepared directories in --to mode
checkout: reject if the branch is already checked out elsewhere
prune: strategies for linked checkouts
checkout: support checking out into a new working directory
...
home_config_paths() combines distinct functionality already implemented
by expand_user_path() and xdg_config_home(), and it also hard-codes the
path ~/.gitconfig, which makes it unsuitable to use for other home
config file paths. Since its use will just add unnecessary complexity to
the code, remove it.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The XDG base dir spec[1] specifies that configuration files be stored in
a subdirectory in $XDG_CONFIG_HOME. To construct such a configuration
file path, home_config_paths() can be used. However, home_config_paths()
combines distinct functionality:
1. Retrieve the home git config file path ~/.gitconfig
2. Construct the XDG config path of the file specified by `file`.
This function was introduced in commit 21cf3227 ("read (but not write)
from $XDG_CONFIG_HOME/git/config file"). While the intention of the
function was to allow the home directory configuration file path and the
xdg directory configuration file path to be retrieved with one function
call, the hard-coding of the path ~/.gitconfig prevents it from being
used for other configuration files. Furthermore, retrieving a file path
relative to the user's home directory can be done with
expand_user_path(). Hence, it can be seen that home_config_paths()
introduces unnecessary complexity, especially if a user just wants to
retrieve the xdg config file path.
As such, implement a simpler function xdg_config_home() for constructing
the XDG base dir spec configuration file path. This function, together
with expand_user_path(), can replace all uses of home_config_paths().
[1] http://standards.freedesktop.org/basedir-spec/basedir-spec-0.7.html
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In b3256eb (standardize and improve lookup rules for external local
repos), enter_repo() was modified to use a different precedence
ordering of suffixes for DWIM of the repository path, and to ensure
that the repository path is actually valid instead of just testing
for existence.
However, the documentation was not modified to reflect these
changes. Fix the documentation to match the code.
Documentation contributed by Jeff King.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do not allow paths with a ".git" component to be added to
the index, as that would mean repository contents could
overwrite our repository files. However, asking "is this
path the same as .git" is not as simple as strcmp() on some
filesystems.
On NTFS (and FAT32), there exist so-called "short names" for
backwards-compatibility: 8.3 compliant names that refer to the same files
as their long names. As ".git" is not an 8.3 compliant name, a short name
is generated automatically, typically "git~1".
Depending on the Windows version, any combination of trailing spaces and
periods are ignored, too, so that both "git~1." and ".git." still refer
to the Git directory. The reason is that 8.3 stores file names shorter
than 8 characters with trailing spaces. So literally, it does not matter
for the short name whether it is padded with spaces or whether it is
shorter than 8 characters, it is considered to be the exact same.
The period is the separator between file name and file extension, and
again, an empty extension consists just of spaces in 8.3 format. So
technically, we would need only take care of the equivalent of this
regex:
(\.git {0,4}|git~1 {0,3})\. {0,3}
However, there are indications that at least some Windows versions might
be more lenient and accept arbitrary combinations of trailing spaces and
periods and strip them out. So we're playing it real safe here. Besides,
there can be little doubt about the intention behind using file names
matching even the more lenient pattern specified above, therefore we
should be fine with disallowing such patterns.
Extra care is taken to catch names such as '.\\.git\\booh' because the
backslash is marked as a directory separator only on Windows, and we want
to use this new helper function also in fsck on other platforms.
A big thank you goes to Ed Thomson and an unnamed Microsoft engineer for
the detailed analysis performed to come up with the corresponding fixes
for libgit2.
This commit adds a function to detect whether a given file name can refer
to the Git directory by mistake.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each working directory of main repository has its own working directory
of submodule, and in most cases they should be checked out to different
revisions. So they should be separated.
It looks logical to make submodule instances in different working
directories to reuse the submodule directory in the common dir of
the main repository, and probably this is how "checkout --to" should
initialize them called on the main repository, but they also should work
fine being completely separated clones.
Testfile t7410-submodule-checkout-to.sh demostrates the behavior.
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently git_path("info/sparse-checkout") resolves to
$GIT_COMMON_DIR/info/sparse-checkout in multiple worktree mode. It
makes more sense for the sparse checkout patterns to be per worktree,
so you can have multiple checkouts with different parts of the tree.
With this, "git checkout --to <new>" on a sparse checkout will create
<new> as a full checkout. Which is expected, it's how a new checkout
is made. The user can reshape the worktree afterwards.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In linked checkouts, borrowed parts like config is taken from
$GIT_COMMON_DIR. $GIT_DIR/config is never used. Report them as
garbage.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout --to" sets up a new working directory with a .git file
pointing to $GIT_DIR/worktrees/<id>. It then executes "git checkout"
again on the new worktree with the same arguments except "--to" is
taken out. The second checkout execution, which is not contaminated
with any info from the current repository, will actually check out and
everything that normal "git checkout" does.
Helped-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This variable is intended to support multiple working directories
attached to a repository. Such a repository may have a main working
directory, created by either "git init" or "git clone" and one or more
linked working directories. These working directories and the main
repository share the same repository directory.
In linked working directories, $GIT_COMMON_DIR must be defined to point
to the real repository directory and $GIT_DIR points to an unused
subdirectory inside $GIT_COMMON_DIR. File locations inside the
repository are reorganized from the linked worktree view point:
- worktree-specific such as HEAD, logs/HEAD, index, other top-level
refs and unrecognized files are from $GIT_DIR.
- the rest like objects, refs, info, hooks, packed-refs, shallow...
are from $GIT_COMMON_DIR (except info/sparse-checkout, but that's
a separate patch)
Scripts are supposed to retrieve paths in $GIT_DIR with "git rev-parse
--git-path", which will take care of "$GIT_DIR vs $GIT_COMMON_DIR"
business.
The redirection is done by git_path(), git_pathdup() and
strbuf_git_path(). The selected list of paths goes to $GIT_COMMON_DIR,
not the other way around in case a developer adds a new
worktree-specific file and it's accidentally promoted to be shared
across repositories (this includes unknown files added by third party
commands)
The list of known files that belong to $GIT_DIR are:
ADD_EDIT.patch BISECT_ANCESTORS_OK BISECT_EXPECTED_REV BISECT_LOG
BISECT_NAMES CHERRY_PICK_HEAD COMMIT_MSG FETCH_HEAD HEAD MERGE_HEAD
MERGE_MODE MERGE_RR NOTES_EDITMSG NOTES_MERGE_WORKTREE ORIG_HEAD
REVERT_HEAD SQUASH_MSG TAG_EDITMSG fast_import_crash_* logs/HEAD
next-index-* rebase-apply rebase-merge rsync-refs-* sequencer/*
shallow_*
Path mapping is NOT done for git_path_submodule(). Multi-checkouts are
not supported as submodules.
Helped-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We allow the user to relocate certain paths out of $GIT_DIR via
environment variables, e.g. GIT_OBJECT_DIRECTORY, GIT_INDEX_FILE and
GIT_GRAFT_FILE. Callers are not supposed to use git_path() or
git_pathdup() to get those paths. Instead they must use
get_object_directory(), get_index_file() and get_graft_file()
respectively. This is inconvenient and could be missed in review (for
example, there's git_path("objects/info/alternates") somewhere in
sha1_file.c).
This patch makes git_path() and git_pathdup() understand those
environment variables. So if you set GIT_OBJECT_DIRECTORY to /foo/bar,
git_path("objects/abc") should return /foo/bar/abc. The same is done
for the two remaining env variables.
"git rev-parse --git-path" is the wrapper for script use.
This patch kinda reverts a0279e1 (setup_git_env: use git_pathdup
instead of xmalloc + sprintf - 2014-06-19) because using git_pathdup
here would result in infinite recursion:
setup_git_env() -> git_pathdup("objects") -> .. -> adjust_git_path()
-> get_object_directory() -> oops, git_object_directory is NOT set
yet -> setup_git_env()
I wanted to make git_pathdup_literal() that skips adjust_git_path().
But that won't work because later on when $GIT_COMMON_DIR is
introduced, git_pathdup_literal("objects") needs adjust_git_path() to
replace $GIT_DIR with $GIT_COMMON_DIR.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The name vsnpath() gives an impression that this is general path
handling function. It's not. This is the underlying implementation of
git_path(), git_pathdup() and strbuf_git_path() which will prefix
$GIT_DIR in the result string.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the previous patch, git_snpath() is modified to allocate a new
strbuf buffer because vsnpath() needs that. But that makes it
awkward because git_snpath() receives a pre-allocated buffer from
outside and has to copy data back. Rename it to strbuf_git_path()
and make it receive strbuf directly.
Using git_path() in update_refs_for_switch() which used to call
git_snpath() is safe because that function and all of its callers do
not keep any pointer to the round-robin buffer pool allocated by
get_pathname().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before the previous commit, get_pathname returns an array of PATH_MAX
length. Even if git_path() and similar functions does not use the
whole array, git_path() caller can, in theory.
After the commit, get_pathname() may return a buffer that has just
enough room for the returned string and git_path() caller should never
write beyond that.
Make git_path(), mkpath() and git_path_submodule() return a const
buffer to make sure callers do not write in it at all.
This could have been part of the previous commit, but the "const"
conversion is too much distraction from the core changes in path.c.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We've been avoiding PATH_MAX whenever possible. This patch makes
get_pathname() return a strbuf and updates the callers to take
advantage of this. The code is simplified as we no longer need to
worry about buffer overflow.
vsnpath() behavior is changed slightly: previously it always clears
the buffer before writing, now it just appends. Fortunately this is a
static function and all of its callers prepare the buffer properly:
git_path() gets the buffer from get_pathname() which resets the
buffer, the remaining call sites start with STRBUF_INIT'd buffer.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Start "git config --edit --global" from a skeletal per-user
configuration file contents, instead of a total blank, when the
user does not already have any. This immediately reduces the need
for a later "Have you forgotten setting core.user?" and we can add
more to the template as we gain more experience.
* mm/config-edit-global:
commit: advertise config --global --edit on guessed identity
home_config_paths(): let the caller ignore xdg path
config --global --edit: create a template file if needed
The caller can signal that it is not interested in learning
the location of $HOME/.gitconfig by passing global=NULL, but
there is no way to decline the path to the configuration
file based on $XDG_CONFIG_HOME.
Allow the caller to pass xdg=NULL to signal that it is not
interested in the XDG location.
Commit-message-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rs/code-cleaning:
remote-testsvn: use internal argv_array of struct child_process in cmd_import()
bundle: use internal argv_array of struct child_process in create_bundle()
fast-import: use hashcmp() for SHA1 hash comparison
transport: simplify fetch_objs_via_rsync() using argv_array
run-command: use internal argv_array of struct child_process in run_hook_ve()
use commit_list_count() to count the members of commit_lists
strbuf: use strbuf_addstr() for adding C strings
Use xmemdupz() to allocate the memory, copy the data and make sure to
NUL-terminate the result, all in one step. The resulting code is
shorter, doesn't contain the constants 1 and '\0', and avoids
duplicating function parameters.
For blame, the last copied byte (o->file.ptr[o->file.size]) is always
set to NUL by fake_working_tree_commit() or read_sha1_file(), so no
information is lost by the conversion to using xmemdupz().
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid code duplication and let strbuf_addstr() call strlen() for us.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
[efl: moved MinGW-specific part to compat/]
[jes: fixed compilation on non-Windows]
Eric Sunshine fixed mingw_offset_1st_component() to return
consistently "foo" for UNC "//machine/share/foo", cf
http://groups.google.com/group/msysgit/browse_thread/thread/c0af578549b5dda0
Author: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Cezary Zawadka <czawadka@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
include.path variable (or any variable that expects a path that can
use ~username expansion) in the configuration file is not a boolean,
but the code failed to check it.
* jk/config-path-include-fix:
handle_path_include: don't look at NULL value
expand_user_path: do not look at NULL path
include.path variable (or any variable that expects a path that can
use ~username expansion) in the configuration file is not a
boolean, but the code failed to check it.
* jk/config-path-include-fix:
handle_path_include: don't look at NULL value
expand_user_path: do not look at NULL path
We explicitly check for and handle the case that the
incoming "path" variable is NULL, but before doing so we
call strchrnul on it, leading to a potential segfault.
We can fix this simply by moving the strchrnul call down; as
a bonus, we can tighten the scope on the associated
variable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jx/relative-path-regression-fix:
Use simpler relative_path when set_git_dir
relative_path should honor dos-drive-prefix
test: use unambigous leading path (/foo) for MSYS
Using a relative_path as git_dir first appears in v1.5.6-1-g044bbbc.
It will make git_dir shorter only if git_dir is inside work_tree,
and this will increase performance. But my last refactor effort on
relative_path function (commit v1.8.3-rc2-12-ge02ca72) changed that.
Always use relative_path as git_dir may bring troubles like
$gmane/234434.
Because new relative_path is a combination of original relative_path
from path.c and original path_relative from quote.c, so in order to
restore the origin implementation, save the original relative_path
as remove_leading_path, and call it in setup.c.
Suggested-by: Karsten Blees <karsten.blees@gmail.com>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Tvangeste found that the "relative_path" function could not work
properly on Windows if "in" and "prefix" have DOS drive prefix
(such as "C:/windows"). ($gmane/234434)
E.g., When execute: test-path-utils relative_path "C:/a/b" "D:/x/y",
should return "C:/a/b", but returns "../../C:/a/b", which is wrong.
So make relative_path honor DOS drive prefix, and add test cases
for it in t0060.
Reported-by: Tvangeste <i.4m.l33t@yandex.ru>
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
"git mv A B" when moving a submodule A does "the right thing",
inclusing relocating its working tree and adjusting the paths in
the .gitmodules file.
* jl/submodule-mv: (53 commits)
rm: delete .gitmodules entry of submodules removed from the work tree
mv: update the path entry in .gitmodules for moved submodules
submodule.c: add .gitmodules staging helper functions
mv: move submodules using a gitfile
mv: move submodules together with their work trees
rm: do not set a variable twice without intermediate reading.
t6131 - skip tests if on case-insensitive file system
parse_pathspec: accept :(icase)path syntax
pathspec: support :(glob) syntax
pathspec: make --literal-pathspecs disable pathspec magic
pathspec: support :(literal) syntax for noglob pathspec
kill limit_pathspec_to_literal() as it's only used by parse_pathspec()
parse_pathspec: preserve prefix length via PATHSPEC_PREFIX_ORIGIN
parse_pathspec: make sure the prefix part is wildcard-free
rename field "raw" to "_raw" in struct pathspec
tree-diff: remove the use of pathspec's raw[] in follow-rename codepath
remove match_pathspec() in favor of match_pathspec_depth()
remove init_pathspec() in favor of parse_pathspec()
remove diff_tree_{setup,release}_paths
convert common_prefix() to use struct pathspec
...
Cygwin port added a "not quite correct but a lot faster and good
enough for many lstat() calls that are only used to see if the
working tree entity matches the index entry" lstat() emulation some
time ago, and it started biting us in places. This removes it and
uses the standard lstat() that comes with Cygwin.
Recent topic that uses lstat on packed-refs file is broken when
this cheating lstat is used, and this is a simplest fix that is
also the cleanest direction to go in the long run.
* rj/cygwin-clarify-use-of-cheating-lstat:
cygwin: Remove the Win32 l/stat() implementation
Commit adbc0b6b ("cygwin: Use native Win32 API for stat", 30-09-2008)
added a Win32 specific implementation of the stat functions. In order
to handle absolute paths, cygwin mount points and symbolic links, this
implementation may fall back on the standard cygwin l/stat() functions.
Also, the choice of cygwin or Win32 functions is made lazily (by the
first call(s) to l/stat) based on the state of some config variables.
Unfortunately, this "schizophrenic stat" implementation has been the
source of many problems ever since. For example, see commits 7faee6b8,
79748439, 452993c2, 085479e7, b8a97333, 924aaf3e, 05bab3ea and 0117c2f0.
In order to avoid further problems, such as the issue raised by the new
reference handling API, remove the Win32 l/stat() implementation.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prepending prefix to pathspec is a trick to workaround the fact that
commands can be executed in a subdirectory, but all git commands run
at worktree's root. The prefix part should always be treated as
literal string. Make it so.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Original design of relative_path() is simple, just strip the prefix
(*base) from the absolute path (*abs).
In most cases, we need a real relative path, such as: ../foo,
../../bar. That's why there is another reimplementation
(path_relative()) in quote.c.
Borrow some codes from path_relative() in quote.c to refactor
relative_path() in path.c, so that it could return real relative
path, and user can reuse this function without reimplementing
his/her own. The function path_relative() in quote.c will be
substituted, and I would use the new relative_path() function when
implementing the interactive git-clean later.
Different results for relative_path() before and after this refactor:
abs path base path relative (original) relative (refactor)
======== ========= =================== ===================
/a/b /a/b . ./
/a/b/ /a/b . ./
/a /a/b/ /a ../
/ /a/b/ / ../../
/a/c /a/b/ /a/c ../c
/x/y /a/b/ /x/y ../../x/y
a/b/ a/b/ . ./
a/b/ a/b . ./
a a/b a ../
x/y a/b/ x/y ../../x/y
a/c a/b a/c ../c
(empty) (null) (empty) ./
(empty) (empty) (empty) ./
(empty) /a/b (empty) ./
(null) (null) (null) ./
(null) (empty) (null) ./
(null) /a/b (segfault) ./
You may notice that return value "." has been changed to "./".
It is because:
* Function quote_path_relative() in quote.c will show the relative
path as "./" if abs(in) and base(prefix) are the same.
* Function relative_path() is called only once (in setup.c), and
it will be OK for the return value as "./" instead of ".".
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes the chown() function is called even when not needed (This
can be provoked by running t1301, and adding some debug code).
Save a chmod from 400 to 400, or from 600 to 600 on these files:
.git/info/refs+
.git/objects/info/packs+
Save chmod on directories from 2770 to 2770:
.git/refs
.git/refs/heads
.git/refs/tags
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All calls to set_shared_perm() use mode == 0, so simplify the
function.
Because all callers use the macro adjust_shared_perm(path) from
cache.h to call this function, convert it to a proper function,
losing set_shared_perm().
Since path.c has much more functions than just mkpath() these days,
drop the stale comment about it.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When core.sharedRepository is used, set_shared_perm() in path.c
needs lstat() to return the correct POSIX permissions.
The default for cygwin is core.ignoreCygwinFSTricks = false, which
means that the fast implementation in do_stat() is used instead of
lstat().
lstat() under cygwin uses the Windows security model to implement
POSIX-like permissions. The user, group or everyone bits can be set
individually.
do_stat() simplifes the file permission bits, and may return a wrong
value. The read-only attribute of a file is used to calculate the
permissions, resulting in either rw-r--r-- or r--r--r--
One effect of the simplified do_stat() is that t1301 fails.
Add a function cygwin_get_st_mode_bits() which returns the POSIX
permissions. When not compiling for cygwin, true_mode_bits() in
path.c is used.
Side note:
t1301 passes under cygwin 1.5.
The "user write" bit is synchronized with the "read only" attribute
of a file:
$ chmod 444 x
$ attrib x
A R C:\temp\pt\x
cygwin 1.7 would show
A C:\temp\pt\x
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the responsibility for normalizing prefixes from
longest_ancestor_length() to its callers. Use slightly different
normalizations at the two callers:
In setup_git_directory_gently_1(), use the old normalization, which
ignores paths that are not usable. In the next commit we will change
this caller to also resolve symlinks in the paths from
GIT_CEILING_DIRECTORIES as part of the normalization.
In "test-path-utils longest_ancestor_length", use the old
normalization, but die() if any paths are unusable. Also change t0060
to only pass normalized paths to the test program (no empty entries or
non-absolute paths, strip trailing slashes from the paths, and remove
tests that thereby become redundant).
The point of this change is to reduce the scope of the ancestor_length
tests in t0060 from testing normalization+longest_prefix to testing
only mostly longest_prefix. This is necessary because when
setup_git_directory_gently_1() starts resolving symlinks as part of
its normalization, it will not be reasonable to do the same in the
test suite, because that would make the test results depend on the
contents of the root directory of the filesystem on which the test is
run. HOWEVER: under Windows, bash mangles arguments that look like
absolute POSIX paths into DOS paths. So we have to retain the level
of normalization done by normalize_path_copy() to convert the
bash-mangled DOS paths (which contain backslashes) into paths that use
forward slashes.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
Change longest_ancestor_length() to take the prefixes argument as a
string_list rather than as a colon-separated string. This will make
it easier for the caller to alter the entries before calling
longest_ancestor_length().
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
The current implementation of git_path() is essentially the same as
that of vsnpath(), with two minor differences. First, git_path()
currently insists that the git directory path is no longer than
PATH_MAX-100 characters in length. However, vsnpath() does not
attempt this arbitrary 100 character reservation for the remaining
path components. Second, vsnpath() uses the "is_dir_sep()" macro,
rather than comparing directly to '/', to determine if the git_dir
path component ends with a path separator.
In order to benefit from the above improvements, along with increased
compatability with git_snpath() and git_pathdup(), we reimplement the
git_path() function using vsnpath().
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
