The test fails on Windows since 2dec68c (tests: add missing &&, batch 2).
Even though this test allocates and leaves behind files, subsequent tests
do not depend on this, so it is safe to just skip it.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ao/send-email-irt:
git-send-email.perl: make initial In-Reply-To apply only to first email
t9001: send-email interation with --in-reply-to and --chain-reply-to
* kb/maint-rebase-autosquash:
rebase: teach --autosquash to match on sha1 in addition to message
rebase: better rearranging of fixup!/squash! lines with --autosquash
* mm/phrase-remote-tracking:
git-branch.txt: mention --set-upstream as a way to change upstream configuration
user-manual: remote-tracking can be checked out, with detached HEAD
user-manual.txt: explain better the remote(-tracking) branch terms
Change incorrect "remote branch" to "remote tracking branch" in C code
Change incorrect uses of "remote branch" meaning "remote-tracking"
Change "tracking branch" to "remote-tracking branch"
everyday.txt: change "tracking branch" to "remote-tracking branch"
Change remote tracking to remote-tracking in non-trivial places
Replace "remote tracking" with "remote-tracking"
Better "Changed but not updated" message in git-status
When the ASCIIDOC8 and ASCIIDOC_NO_ROFF knobs were built,
many people were still on asciidoc 7 and using older
versions of docbook-xsl. These days, even the almost
2-year-old Debian stable needs these knobs turned.
So let's turn them by default. The new knobs ASCIIDOC7 and
ASCIIDOC_ROFF can be used to get the old behavior if people
are on older systems.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be tedious to wait for a multi-million-revision import.
Unfortunately it is hard to spy on the import because fast-import
works by continuously streaming out objects, without updating the pack
index or refs until a checkpoint command or the end of the stream.
So allow the impatient operator to request checkpoints by sending a
signal, like so:
killall -USR1 git-fast-import
When receiving such a signal, fast-import would schedule a checkpoint
to take place after the current top-level command (usually a "commit"
or "blob" request) finishes.
Caveats: just like ordinary checkpoint commands, such requests slow
down the import. Switching to a new pack at a suboptimal moment is
also likely to result in a less dense initial collection of packs.
That's the price.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
imap-send: link against libcrypto for HMAC and others
git-send-email.perl: Deduplicate "to:" and "cc:" entries with names
mingw: do not set errno to 0 on success
* jm/mailmap:
t4203: do not let "git shortlog" DWIM based on tty
t4203 (mailmap): stop hardcoding commit ids and dates
mailmap: fix use of freed memory
* jk/repack-reuse-object:
Documentation: pack.compression: explain how to recompress
repack: add -F flag to let user choose between --no-reuse-delta/object
Conflicts:
Documentation/git-repack.txt
* mg/reset-doc:
git-reset.txt: make modes description more consistent
git-reset.txt: point to git-checkout
git-reset.txt: use "working tree" consistently
git-reset.txt: reset --soft is not a no-op
git-reset.txt: reset does not change files in target
git-reset.txt: clarify branch vs. branch head
When using stricter linkers, such as GNU gold or Darwin ld, transitive
dependencies are not counted towards symbol resolution. If we don't link
imap-send to libcrypto, we'll have undefined references to the HMAC_*,
EVP_* and ERR_* functions families.
Signed-off-by: Diego Elio Pettenò <flameeyes@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
More often than not, find_object is called for recently inserted objects.
Optimise for this case by inserting new entries at the start of the chain.
This doesn't affect the cost of new inserts but reduces the cost of find
and insert for existing object entries.
Signed-off-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If an email address in the "to:" list is in the style
"First Last <email@domain.tld>", ie: not just a bare
address like "email@domain.tld", and the same named
entry style exists in the "cc:" list, the current
logic will not remove the entry from the "cc:" list.
Add logic to better deduplicate the "cc:" list by also
matching the email address with angle brackets.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The reflog-walking mechanism is based on the regular
revision traversal. We just rewrite the parents of each
commit in fake_reflog_parent to point to the commit in the
next reflog entry instead of the real parents.
However, the regular revision traversal tries not to show
the same commit twice, and so sets the SHOWN flag on each
commit it shows. In a reflog, however, we may want to see
the same commit more than once if it appears in the reflog
multiple times (which easily happens, for example, if you do
a reset to a prior state).
The fake_reflog_parent function takes care of this by
clearing flags, including SHOWN. Unfortunately, it does so
at the very end of the function, and it is possible to
return early from the function if there is no fake parent to
set up (e.g., because we are at the very first reflog entry
on the branch). In such a case the flag is not cleared, and
the entry is skipped by the revision traversal machinery as
already shown.
You can see this by walking the log of a ref which is set to
its very first commit more than once (the test below shows
such a situation). In this case the reflog walk will fail to
show the entry for the initial creation of the ref.
We don't want to simply move the flag-clearing to the top of
the function; we want to make sure flags set during the
fake-parent installation are also cleared. Instead, let's
hoist the flag-clearing out of the fake_reflog_parent
function entirely. It's not really about fake parents
anyway, and the only caller is the get_revision machinery.
Reported-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a non-interactive rebase of a ref fails at commit X and is aborted by
the user, the ref will be updated twice. First to point at X (with the
reflog message "rebase finished: $head_name onto $onto"), and then back
to $orig_head. It should not be updated at all.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running test t9010 without the SVN:: perl modules currently errors
out, for no good reason. We can make these tests easier to read and
run by not using the perl libsvn bindings and instead duplicating only
the relevant code from lib-git-svn.sh.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 490544b (get_cwd_relative(): do not misinterpret suffix as
subdirectory) handles case where:
dir = "/path/work";
cwd = "/path/work-xyz";
When it comes to the end of get_cwd_relative(), dir is at '\0' and cwd
is at '-'. The rest of cwd, "-xyz", clearly cannot be the relative
path from dir to cwd. However there is another case where:
dir = "/"; /* or even "c:/" */
cwd = "/path/to/here";
In this special case, while *cwd == 'p', which is not a path
separator, the rest of cwd, "path/to/here", can be returned as a
relative path from dir to cwd.
Handle this case and make t1509 pass again.
Reported-by: Albert Strasheim <fullung@gmail.com>
Reported-by: Matthijs Kooijman <matthijs@stdin.nl>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently do_lstat always sets errno to 0 on success. This incorrectly
overwrites previous errors.
Fetch the error-code into a temporary variable instead, and assign that
to errno on failure.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The mingw-runtime implemenation of opendir, readdir and closedir
sets errno to 0 on success, something that POSIX explicitly
forbids. 3ba7a06 ("A loose object is not corrupt if it cannot be
read due to EMFILE") introduce a dependency on this behaviour,
leading to a broken "git clone" on Windows.
compat/mingw.c contains an implementation of readdir, and
compat/msvc.c contains implementations of opendir and closedir.
Move these to compat/win32/dirent.[ch], and change to our own DIR
structure at the same time.
This provides a generic Win32-implementation of opendir, readdir
and closedir which works on both MinGW and MSVC and does not reset
errno, and as a result git clone is working again on Windows.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously all error conditions were ignored. Be nice, and set errno
when we should.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
compat/mingw.c's readdir expects to be the one that starts the search,
and if it isn't, then the first entry will be missing or incorrect.
Fix this by removing the call to _findfirst, and initializing dd_handle
to INVALID_HANDLE_VALUE.
At the same time, make sure we use FindClose instead of _findclose,
which is symmetric to readdir's FindFirstFile. Take into account that
the find-handle might already be closed by readdir.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The defintion of DIR expects the allocating function to extend
dd_name by over-allocating. This is not currently done in our
implementation of opendir. Fix this.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previsouly, the code checked for malloc-failure after it had accessed
the returned pointer. Move the check a bit earlier to avoid segfault.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ef/mingw-daemon:
daemon: opt-out on features that require posix
daemon: make --inetd and --detach incompatible
daemon: use socklen_t
mingw: use poll-emulation from gnulib
mingw: import poll-emulation from gnulib
daemon: get remote host address from root-process
Improve the mingw getaddrinfo stub to handle more use cases
daemon: use full buffered mode for stderr
daemon: use run-command api for async serving
mingw: add kill emulation
mingw: support waitpid with pid > 0 and WNOHANG
mingw: use real pid
inet_ntop: fix a couple of old-style decls
compat: add inet_pton and inet_ntop prototypes
mingw: implement syslog
mingw: add network-wrappers for daemon
Pass output through the pager if format-patch is run with --stdout. This
saves the user the trouble of running git with '-p' or piping through a
pager.
setup_pager() already checks if stdout is a tty, so we don't have to
worry about behaviour if the user redirects/pipes stdout. Paging can
also be disabled with the config
[pager]
format-patch = false
Add tests to check for these behaviour.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Interactive rebase allows the '--verify' option to be passed, but it will
be ignored. Implement proper support for the option for both interactive
and non-interactive rebase by making it override any previous
'--no-verify'.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When compiling with pthread support, transport-helper.c needs to include
necessary header files. Also fix a few error messages in remote-ext and
remote-fd programs, and a potential buffer underrun in remote-fd.
In the documentation, clarify how %G and %V are used; the old description
looked as if they take repository/vhost parameters, which was wrong.
Also fix AsciiDoc markup for the page title of remote-fd/remote-ext manpages,
and tweak the way how section headers are shown.
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
