So that the committer is reset properly.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some commands need the first word to determine the actual action that is
being executed, however, the command is wrong when we use an alias, for
example 'alias.p=push', if we try to complete 'git p origin ', the
result would be wrong because __git_complete_remote_or_refspec() doesn't
know where it came from.
So let's override words[1], so the alias 'p' is override by the actual
command, 'push'.
Reported-by: Aymeric Beaumet <aymeric.beaumet@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tests-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apparently Mercurial can have paths such as 'foo//bar', so normalize all
paths.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit d3243d7 (test-bzr.sh, test-hg.sh: allow running from any dir)
allowed the tests to run from any directory, however, it didn't update
all the tests.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eradicate mistaken use of "nor" (that is, essentially "nor" used
not in "neither A nor B" ;-)) from in-code comments, command output
strings, and documentations.
* jl/nor-or-nand-and:
code and test: fix misuses of "nor"
comments: fix misuses of "nor"
contrib: fix misuses of "nor"
Documentation: fix misuses of "nor"
Given that these constants are only being used when updating
references, it is inappropriate to give them such generic names as
"DIE_ON_ERR". So prefix their names with "UPDATE_REFS_".
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit contains the squashed changes from the upstream
git-multimail repository since the last code drop. Highlights:
* Fix encoding of non-ASCII email addresses in email headers.
* Fix backwards-compatibility bugs for older Python 2.x versions.
* Fix a backwards-compatibility bug for Git 1.7.1.
* Add an option commitDiffOpts to customize logs for revisions.
* Pass "-oi" to sendmail by default to prevent premature
termination
on a line containing only ".".
* Stagger email "Date:" values in an attempt to help mail clients
thread the emails in the right order.
* If a mailing list setting is missing, just skip sending the
corresponding email (with a warning) instead of failing.
* Add a X-Git-Host header that can be used for email filtering.
* Allow the sender's fully-qualified domain name to be configured.
* Minor documentation improvements.
* Add a CHANGES file.
Contributions-by: Raphaël Hertzog <hertzog@debian.org>
Contributions-by: Eric Berberich <eric.berberich@gmail.com>
Contributions-by: Michiel Holtkamp <git@elfstone.nl>
Contributions-by: Malte Swart <mswart@devtation.de>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A stray environment variable $prefix could have leaked into and
affected the behaviour of the "subtree" script.
* jk/subtree-prefix:
subtree: initialize "prefix" variable
Mercurial can have bookmarks pointing to "nullid" (the empty root
revision), while Git can not have references to it. When cloning or
fetching from a Mercurial repository that has such a bookmark, the
import failed because git-remote-hg was not be able to create the
corresponding reference.
Warn the user about the invalid reference, and do not advertise these
bookmarks as head refs, but otherwise continue the import. In
particular, we still keep track of the fact that the remote repository
has a bookmark of the given name, in case the user wants to modify that
bookmark.
Also add some test cases for this issue.
Reported-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Max Horn <max@quendi.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Updates transport-helper, fast-import and fast-export to allow the
ref mapping and ref deletion in a way similar to the natively
supported transports.
* fc/transport-helper-fixes:
remote-bzr: support the new 'force' option
test-hg.sh: tests are now expected to pass
transport-helper.c: do not overwrite forced bit
transport-helper: check for 'forced update' message
transport-helper: add 'force' to 'export' helpers
transport-helper: don't update refs in dry-run
transport-helper: mismerge fix
We parse the "--prefix" command-line option into the
"$prefix" shell variable. However, if we do not see such an
option, the variable is left with whatever value it had in
the environment. We should initialize it to a known value,
like we do for other variables.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Richard Hansen <rhansen@bbn.com>
Acked-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a line in a patch starts with "--- " it will be deemed
malformed unless it also contains the proper diff header
format. This situation can happen with a valid patch if
it has a line starting with "-- " and that line is removed.
This patch just removes the check in git-contacts.
Signed-off-by: Lars Gullik Bjønnes <larsbj@gullik.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the variable $OPTIONS_STUCKLONG is not empty, then rev-parse
option parsing is done in --stuck-long mode.
Signed-off-by: Nicolas Vigier <boklm@mars-attacks.org>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When working with a remote repository add/pull/push do not accept a
<refspec> as parameter but just a <ref>. They should accept any
well-formatted ref name.
This patch:
- relaxes the check the <ref> argument in "git subtree add <repo>"
(previous code would not accept a ref name that does not exist
locally too, new code only ensures that the ref is well formatted)
- add the same check in "git subtree pull/push" + check the number of
parameters
- update the doc to use <ref> instead of <refspec>
Signed-off-by: Anthony Baire <Anthony.Baire@irisa.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The bash/zsh completion code did not know about format.coverLetter
among many format.* configuration variables.
* rr/completion-format-coverletter:
completion: complete format.coverLetter
When attempting to complete
$ git config remote.push<TAB>
'pushdefault' doesn't come up. This is because "$cur" is matched with
"remote.*" and a list of remotes are completed. Add 'pushdefault' as a
candidate for completion too, using __gitcomp_nl_append ().
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When attempting to complete
$ git config branch.auto<TAB>
'autosetupmerge' and 'autosetuprebase' don't come up. This is because
"$cur" is matched with "branch.*" and a list of branches are
completed. Add 'autosetupmerge', 'autosetuprebase' as candidates for
completion too, using __gitcomp_nl_append ().
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are situations where multiple classes of completions possible. For
example
branch.<TAB>
should try to complete
branch.master.
branch.autosetupmerge
branch.autosetuprebase
The first candidate has the suffix ".", and the second/ third candidates
have the suffix " ". To facilitate completions of this kind, create a
variation of __gitcomp_nl () that appends to the existing list of
completion candidates, COMPREPLY.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If zsh completion is being read from a location that is different from
system-wide default, it is likely that the user is trying to use a
custom version, perhaps closer to the bleeding edge, installed in her
own directory. We will more likely to find the matching bash completion
script in the same directory than in those system default places.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* fc/remote-helper-fixes:
remote-hg: test 'shared_path' in a moved clone
remote-hg: add tests for special filenames
remote-hg: fix 'shared path' path
remote-helpers: add extra safety checks
remote-hg: avoid buggy strftime()
Since e71d1378 (remote-hg: fix 'shared path' path, 2013-12-07),
Mercurial 'shared_path' file is correctly updated whenever a clone is
moved. Make sure it keeps working, especially as this is depending on a
private Mercurial file.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: John Szakmeister <john@szakmeister.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Felipe Contreras <felipe.contreras@gmail.com>
* jn/scripts-updates:
remove #!interpreter line from shell libraries
test: replace shebangs with descriptions in shell libraries
test: make FILEMODE a lazy prereq
contrib: remove git-p4import
mark contributed hooks executable
mark perl test scripts executable
mark Windows build scripts executable
So that we check that UTF-8 and spaces work fine.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the repository is moved, the absolute path of the shared repository
would fail.
Make sure it's always up-to-date.
Reported-by: Michael Davis <mjmdavis@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Suggested-by: Roman Ovchinnikov <coolthecold@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
error on pull: fatal: Invalid raw date "" in ident: remote-hg <>
Neither %s nor %z are officially supported by python, they may work on
some (most?) platforms, but not all.
removed strftime use of %s and %z, which are not officially supported by python, with standard formats
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Updates to remote-bzr and remote-hg in contrib.
* rh/remote-hg-bzr-updates:
remote-bzr, remote-hg: fix email address regular expression
test-hg.sh: help user correlate verbose output with email test
test-hg.sh: fix duplicate content strings in author tests
test-hg.sh: avoid obsolete 'test' syntax
test-hg.sh: eliminate 'local' bashism
test-bzr.sh, test-hg.sh: prepare for change to push.default=simple
test-bzr.sh, test-hg.sh: allow running from any dir
test-lib.sh: convert $TEST_DIRECTORY to an absolute path
Build and installation procedure clean-up.
* jn/mediawiki-makefile-updates:
git-remote-mediawiki build: handle DESTDIR/INSTLIBDIR with whitespace
git-remote-mediawiki build: make 'install' command configurable
git-remote-mediawiki: honor DESTDIR in "make install"
git-remote-mediawiki: do not remove installed files in "clean" target
In a shell snippet meant to be sourced by other shell scripts, an
opening #! line does more harm than good.
The harm:
- When the shell library is sourced, the interpreter and options from
the #! line are not used. Specifying a particular shell can
confuse the reader into thinking it is safe for the shell library
to rely on idiosyncrasies of that shell.
- Using #! instead of a plain comment drops a helpful visual clue
that this is a shell library and not a self-contained script.
- Tools such as lintian can use a #! line to tell when an
installation script has failed by forgetting to set a script
executable. This check does not work if shell libraries also start
with a #! line.
The good:
- Text editors notice the #! line and use it for syntax highlighting
if you try to edit the installed scripts (without ".sh" suffix) in
place.
The use of the #! for file type detection is not needed because Git's
shell libraries are meant to be edited in source form (with ".sh"
suffix). Replace the opening #! lines with comments.
This involves tweaking the test harness's valgrind support to find
shell libraries by looking for "# " in the first line instead of "#!"
(see v1.7.6-rc3~7, 2011-06-17).
Suggested by Russ Allbery through lintian. Thanks to Jeff King and
Clemens Buchacher for further analysis.
Tested by searching for non-executable scripts with #! line:
find . -name .git -prune -o -type f -not -executable |
while read file
do
read line <"$file"
case $line in
'#!'*)
echo "$file"
;;
esac
done
The only remaining scripts found are templates for shell scripts
(unimplemented.sh, wrap-for-bin.sh) and sample input used in tests
(t/t4034/perl/{pre,post}).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git p4import documentation has suggested git p4 as a better
alternative for more than 6 years. (According to the mailing list
discussion when it was moved to contrib/, git-p4import has serious
bugs --- e.g., its incremental mode just doesn't work.) Since then,
git p4 has been actively developed and was promoted to a standard git
command alongside git svn.
Searches on google.com/trends and stackoverflow suggest that no one is
looking for git-p4import any more. Remove it.
Noticed while considering marking the contrib/p4import/git-p4import.py
script executable as part of a wider sweep.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The docs in contrib/hooks/pre-auto-gc-battery suggest:
For example, if the hook is stored in
/usr/share/git-core/contrib/hooks/pre-auto-gc-battery:
chmod a+x pre-auto-gc-battery
cd /path/to/your/repository.git
ln -sf /usr/share/git-core/contrib/hooks/pre-auto-gc-battery \
hooks/pre-auto-gc
Unfortunately on multi-user systems most users do not have write
access to /usr. Better to mark the sample hooks executable in
the first place so users do not have to tweak their permissions to
use them by symlinking into .git/hooks/.
Reported-by: Olivier Berger <olivier.berger@it-sudparis.eu>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows the convention is to rely on filename extensions to decide
whether a file is executable so Windows users are probably not relying
on the executable bit of these scripts, but on other platforms it can
be useful documentation.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before, strings like "foo.bar@example.com" would be converted to
"foo. <bar@example.com>" when they should be "unknown
<foo.bar@example.com>".
Signed-off-by: Richard Hansen <rhansen@bbn.com>
Reviewed-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's hard to tell which author conversion test failed when the email
addresses look similar.
Signed-off-by: Richard Hansen <rhansen@bbn.com>
Reviewed-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"beta" was used twice. Change the second copy to "gamma" and
increment the remaining content strings.
Signed-off-by: Richard Hansen <rhansen@bbn.com>
Reviewed-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The POSIX spec says that the '-a', '-o', and parentheses operands to
the 'test' utility are obsolete extensions due to the potential for
ambiguity. Replace '-o' with '|| test' to avoid unspecified behavior.
Signed-off-by: Richard Hansen <rhansen@bbn.com>
Reviewed-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike bash, POSIX shell does not specify a 'local' command for
declaring function-local variable scope. Except for IFS, the variable
names are not used anywhere else in the script so simply remove the
'local'. For IFS, move the assignment to the 'read' command to
prevent it from affecting code outside the function.
Signed-off-by: Richard Hansen <rhansen@bbn.com>
Reviewed-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change 'git push <remote>' to 'git push <remote> <branch>' in one of
the test-bzr.sh tests to ensure that the test continues to pass when
the default value of push.default changes to simple.
Signed-off-by: Richard Hansen <rhansen@bbn.com>
Reviewed-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Set TEST_DIRECTORY to the t/ directory (if TEST_DIRECTORY is not
already set) so that the user doesn't already have to be in the test
directory to run these test scripts.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Based-on-patch-by: Richard Hansen <rhansen@bbn.com>
Reviewed-by: Richard Hansen <rhansen@bbn.com>
Signed-off-by: Richard Hansen <rhansen@bbn.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The internal mercurial API expects ordinary 8-bit string objects, not
Unicode string objects. With this change, the test-hg.sh unit tests
pass again.
Signed-off-by: Richard Hansen <rhansen@bbn.com>
Reviewed-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This has been deprecated since commit 87194d2 (Deprecate peek-remote,
2007-11-24), included in version 1.5.4.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git lost-found" has been deprecated since commit fc8b5f0 (Deprecate
git-lost-found, 2007-11-08), included in version 1.5.4.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git tar-tree" has been a thin wrapper around "git archive" since commit
fd88d9c (Remove upload-tar and make git-tar-tree a thin wrapper to
git-archive, 2006-09-24), which also made it print a message indicating
that git-tar-tree is deprecated.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The release notes for Git 1.5.4 say that "git repo-config" will be
removed in the next feature release. Since Git 2.0 is nearly here,
remove it.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Quote DESTDIR and INSTLIBDIR for the shell in the same way as is done in
the toplevel Makefile to avoid confusion in case they contain shell
metacharacters.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On some machines, the most usable 'install' tool is named
'ginstall'.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So now you can run
DESTDIR=$(pwd)/tmp make -Ccontrib/mw-to-git install
to install the mediawiki remote helper, git-mw tool, and Git::Mediawiki
perl module under tmp/ as preparation for zipping it up and extracting
on another machine.
While at it, make sure the directory that should contain Git::Mediawiki
exists before putting a file there. Without this patch, the makefile
uses DESTDIR when installing git-mw and git-remote-mediawiki but not
the perl module, resulting in errors from "make install" if the
$(INSTLIBDIR)/Git directory does not exist:
install: cannot create regular file \
'/usr/share/perl/5.18.1/Git/Mediawiki.pm': No such file or directory
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running "make clean" after a successful "make install" should not
result in a broken mediawiki remote helper.
Reported-by: Thorsten Glaser <t.glaser@tarent.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A fast-import stream expresses a pathname with funny characters by
quoting them in C style; remote-hg remote helper forgot to unquote
such a path.
* ap/remote-hg-unquote-cquote:
remote-hg: unquote C-style paths when exporting
The Makefile currently builds the roff manpage, but not the
html form. As some people may prefer the latter, let's make
it an option to build that, too. We also wire it into "make
doc" so that it is built by default.
This patch does not build or install it as part of
"install-doc"; that would require extra infrastructure to
handle installing the html as we do in git's regular
Documentation/ tree. That can come later if somebody is
interested.
Tested-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cleanups and tweaks for credential handling to work with ancient versions
of the gnome-keyring library that are still in use.
* bc/gnome-keyring:
contrib/git-credential-gnome-keyring.c: support really ancient gnome-keyring
contrib/git-credential-gnome-keyring.c: support ancient gnome-keyring
contrib/git-credential-gnome-keyring.c: report failure to store password
contrib/git-credential-gnome-keyring.c: use glib messaging functions
contrib/git-credential-gnome-keyring.c: use glib memory allocation functions
contrib/git-credential-gnome-keyring.c: use secure memory for reading passwords
contrib/git-credential-gnome-keyring.c: use secure memory functions for passwds
contrib/git-credential-gnome-keyring.c: use gnome helpers in keyring_object()
contrib/git-credential-gnome-keyring.c: set Gnome application name
contrib/git-credential-gnome-keyring.c: ensure buffer is non-empty before accessing
contrib/git-credential-gnome-keyring.c: strlen() returns size_t, not ssize_t
contrib/git-credential-gnome-keyring.c: exit non-zero when called incorrectly
contrib/git-credential-gnome-keyring.c: add static where applicable
contrib/git-credential-gnome-keyring.c: *style* use "if ()" not "if()" etc.
contrib/git-credential-gnome-keyring.c: remove unused die() function
contrib/git-credential-gnome-keyring.c: remove unnecessary pre-declarations
git-fast-import documentation says that paths can be C-style quoted.
Unfortunately, the current remote-hg helper doesn't unquote quoted
path and pass them as-is to Mercurial when the commit is created.
This results in the following situation:
- clone a mercurial repository with git
- add a file with space in a directory: `>dir/foo\ bar`
- commit that new file, and push the change to mercurial
- the mercurial repository now has a new directory named '"dir',
which contains a file named 'foo bar"'
Use Python str.decode('string-escape') to unquote the string if it
starts and ends with ". It has been tested with quotes, spaces, and
utf-8 encoded file-names.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rewrite "git repack" in C.
* sb/repack-in-c:
repack: improve warnings about failure of renaming and removing files
repack: retain the return value of pack-objects
repack: rewrite the shell script in C
The gnome-keyring lib (0.4) distributed with RHEL 4.X is really ancient
and does not provide most of the synchronous functions that even ancient
releases do. Thankfully, we're only using one function that is missing.
Let's emulate gnome_keyring_item_delete_sync() by calling the asynchronous
function and then triggering the event loop processing until our
callback is called.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The gnome-keyring lib distributed with RHEL 5.X is ancient and does
not provide a few of the functions/defines that more recent versions
do, but mostly the API is the same. Let's provide the missing bits
via macro definitions and function implementation.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Produce an error message when we fail to store a password to the keyring.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than roll our own, let's use the messaging functions provided
by glib.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than roll our own, let's use the memory allocation/free routines
provided by glib.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gnome-keyring provides functions to allocate non-pageable memory (if
possible). Let's use them to allocate memory that may be used to hold
secure data read from the keyring.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gnome-keyring provides functions for allocating non-pageable memory (if
possible) intended to be used for storing passwords. Let's use them.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than carefully allocating memory for sprintf() to write into,
let's make use of the glib helper function g_strdup_printf(), which
makes things a lot easier and less error-prone.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since this is a Gnome application, let's set the application name to
something reasonable. This will be displayed in Gnome dialog boxes
e.g. the one that prompts for the user's keyring password.
We add an include statement for glib.h and add the glib-2.0 cflags and
libs to the compilation arguments, but both of these are really noops
since glib is already a dependency of gnome-keyring.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ensure buffer length is non-zero before attempting to access the last
element.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also, initialization is not necessary since it is assigned before it is
used.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the correct arguments were not specified, this program should exit
non-zero. Let's do so.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '+=' operator is not supported by old Bash versions (3.0) we still
care about.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When working with multiple remotes, it is common to switch the upstream
from a remote to another. Doing so, the prompt may not be the expected
one. Providing an option to display tracking information sounds useful.
Add a "name" option to GIT_PS1_SHOWUPSTREAM which will show the upstream
abbrev name. This option is ignored if "verbose" is false.
Signed-off-by: Julien Carsique <julien.carsique@gmail.com>
Improved-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
DiffMerge is a non-free (but gratis) tool that supports OS X, Windows and Linux.
See http://www.sourcegear.com/diffmerge/
DiffMerge includes a script `/usr/bin/diffmerge` that can be used to launch the
graphical compare tool.
This change adds mergetool support for DiffMerge and adds 'diffmerge' as an
option to the mergetool help.
Signed-off-by: Stefan Saasen <ssaasen@atlassian.com>
Acked-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Simple patch to avoid unitialized warning and log what we'll do.
Signed-off-by: Ted Zlatanov <tzz@lifelogs.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Almost a year ago the CIA service irrevocably crashed. The CIA author
had plans to revive the service, but the effort has since sunk without
trace.
Projects tend to use "irker" instead these days. Repository hook
scripts for irker ship with the irker distribution.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Acked-by: Eric S. Raymond <esr@thyrsus.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Mediawiki introduces a new API for queries w/ more than 500 results in
version 1.21. That change triggered an infinite loop while cloning a
mediawiki with such a page.
The latest API renamed and moved the "continuing" information in the
response, necessary to build the next query. The code failed to retrieve
that information but still detected that it was in a "continuing
query". As a result, it launched the same query over and over again.
If a "continuing" information is detected in the response (old or new),
the next query is updated accordingly. If not, we quit assuming it's not
a continuing query.
Reported-by: Benjamin Cathey
Signed-off-by: Benoit Person <benoit.person@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
These are all defined before they are used, so it is not necessary to
pre-declare them. Remove the pre-declarations.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Similar to Bash's default filename completion, our git-aware filename
completion stops at directory boundaries, i.e. it doesn't offer the
full 'path/to/file' at first, but only 'path/'. To achieve that the
completion script runs 'git ls-files' with specific command line
options to get the list of relevant paths under the current directory,
and then processes each path to strip all but the base directory or
filename (see __git_index_files()).
To offer only modified and untracked files for 'git add' the
completion script runs 'git ls-files --exclude-standard --others
--modified'. This command lists all non-ignored files in untracked
directories, which leads to a noticeable delay caused by the
processing mentioned above if there are a lot of such files
(__git_index_files() specifies '--exclude-standard' internally):
$ mkdir untracked-dir
$ for i in {1..10000} ; do >untracked-dir/$i ; done
$ time __git_index_files "--others --modified"
untracked-dir
real 0m0.537s
user 0m0.452s
sys 0m0.160s
Eliminate this delay by additionally passing the '--directory
--no-empty-directory' options to 'git ls-files' to show only the
directory name of non-empty untracked directories instead their whole
content:
$ time __git_index_files "--others --modified --directory --no-empty-directory"
untracked-dir
real 0m0.029s
user 0m0.020s
sys 0m0.004s
Filename completion for 'git clean' suffers from the same delay, as it
offers untracked files, too. The fix could be the same, but since it
actually makes sense to 'git clean' empty directories, in this case we
only pass the '--directory' option to 'git ls-files'.
Reported-by: Isaac Levy <ilevy@google.com>
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* fc/contrib-bzr-hg-fixes:
contrib/remote-helpers: quote variable references in redirection targets
contrib/remote-helpers: style updates for test scripts
remote-hg: use notes to keep track of Hg revisions
remote-helpers: cleanup more global variables
remote-helpers: trivial style fixes
remote-hg: improve basic test
remote-hg: add missing &&s in the test
remote-hg: fix test
remote-bzr: make bzr branches configurable per-repo
remote-bzr: fix export of utf-8 authors
Unlike other git commands which work correctly at the top-level or in a
subdirectory, git-contacts fails when invoked in a subdirectory. This is
because it invokes git-blame with pathnames relative to the top-level,
but git-blame interprets the pathnames as relative to the current
directory. Fix this.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The motivation of this patch is to get closer to a goal of being
able to have a core subset of git functionality built in to git.
That would mean
* people on Windows could get a copy of at least the core parts
of Git without having to install a Unix-style shell
* people using git in on servers with chrooted environments
do not need to worry about standard tools lacking for shell
scripts.
This patch is meant to be mostly a literal translation of the
git-repack script; the intent is that later patches would start using
more library facilities, but this patch is meant to be as close to a
no-op as possible so it doesn't do that kind of thing.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We liberally use "committish" and "commit-ish" (and "treeish" and
"tree-ish"); as these are non-words, let's unify these terms to
their dashed form. More importantly, clarify the documentation on
object peeling using these terms.
* rh/ishes-doc:
glossary: fix and clarify the definition of 'ref'
revisions.txt: fix and clarify <rev>^{<type>}
glossary: more precise definition of tree-ish (a.k.a. treeish)
use 'commit-ish' instead of 'committish'
use 'tree-ish' instead of 'treeish'
glossary: define commit-ish (a.k.a. committish)
glossary: mention 'treeish' as an alternative to 'tree-ish'
* mm/mediawiki-dumb-push-fix:
git-remote-mediawiki: no need to update private ref in non-dumb push
git-remote-mediawiki: use no-private-update capability on dumb push
transport-helper: add no-private-update capability
git-remote-mediawiki: add test and check Makefile targets
Update post-receive-email script to make sure the message contents
and pathnames are encoded consistently in UTF-8.
* jn/post-receive-utf8:
hooks/post-receive-email: set declared encoding to utf-8
hooks/post-receive-email: force log messages in UTF-8
hooks/post-receive-email: use plumbing instead of git log/show
Pass a list of open bzrlib.transport.Transport objects to each bzrlib
function that might create a transport. This enables bzrlib to reuse
existing transports when possible, avoiding multiple concurrent
connections to the same remote server.
If the remote server is accessed via ssh, this fixes a couple of
problems:
* If the user does not have keys loaded into an ssh agent, the user
may be prompted for a password multiple times.
* If the user is using OpenSSH and the ControlMaster setting is set
to auto, git-remote-bzr might hang. This is because bzrlib closes
the multiple ssh sessions in an undefined order and might try to
close the master ssh session before the other sessions. The
master ssh process will not exit until the other sessions have
exited, causing a deadlock. (The ssh sessions are closed in an
undefined order because bzrlib relies on the Python garbage
collector to trigger ssh session termination.)
Signed-off-by: Richard Hansen <rhansen@bbn.com>
Acked-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace 'committish' in documentation and comments with 'commit-ish'
to match gitglossary(7) and to be consistent with 'tree-ish'.
The only remaining instances of 'committish' are:
* variable, function, and macro names
* "(also committish)" in the definition of commit-ish in
gitglossary[7]
Signed-off-by: Richard Hansen <rhansen@bbn.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to update the private ref ourselves, but this update is now
done by default since 664059fb (transport-helper: update remote
helper namespace, 2013-04-17).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though it is not required by POSIX to double-quote the
redirection target in a variable, our code does so because some
versions of bash issue a warning without the quotes.
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During the review of the main series it was noticed that these test
scripts can use updates to conform to our coding style better, but
fixing the style should be done in a patch separate from the main
series.
This updates the test-*.sh scripts only for style issues:
* We do not leave SP between a redirection operator and the
filename;
* We change line before "then", "do", etc. rather than terminating
the condition for "if"/"while" and list for "for" with a
semicolon;
* When HERE document does not use any expansion, we quote the end
marker (e.g. "cat <<\EOF" not "cat <<EOF") to signal the readers
that there is no funny substitution to worry about when reading
the code.
* We use "test" rather than "[".
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Keep track of Mercurial revisions as Git notes under the 'refs/notes/hg'
ref. This way, the user can easily see which Mercurial revision
corresponds to certain Git commit.
Unfortunately, there's no way to efficiently update the notes after
doing an export (push), so they'll have to be updated when importing
(fetching).
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some people still use rather old versions of bash, which cannot
grok some constructs like 'printf -v varname' the prompt and
completion code started to use recently.
* bc/completion-for-bash-3.0:
contrib/git-prompt.sh: handle missing 'printf -v' more gracefully
t9902-completion.sh: old Bash still does not support array+=('') notation
git-completion.bash: use correct Bash/Zsh array length syntax
There are a few level 4 and 2 perlcritic issues in the current code. We
make level 5 fatal, and keep level 2 as warnings.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
They don't need to be specified if they are not going to be set.
Suggested-by: Dusty Phillips <dusty@linux.ca>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It appears 'let' is not present in all shells.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It wasn't being checked properly before; those refs never existed.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Different repositories have different branches, some are are even
branches themselves.
Reported-by: Peter Niederlag <netservice@niekom.de>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reported-by: Joakim Verona <joakim@verona.se>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Old Bash (3.0) which is distributed with RHEL 4.X and other ancient
platforms that are still in wide use, do not have a printf that
supports -v. Neither does Zsh (which is already handled in the code).
As suggested by Junio, let's test whether printf supports the -v
option and store the result. Then later, we can use it to
determine whether 'printf -v' can be used, or whether printf
must be called in a subshell.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The syntax for retrieving the number of elements in an array is:
${#name[@]}
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-contacts invokes git-blame once for each patch hunk it encounters.
No attempt is made to consolidate invocations for multiple hunks
referencing the same file at the same revision. This can become
expensive quickly.
Reduce the number of git-blame invocations by taking advantage of the
ability to specify multiple -L ranges for a single invocation.
Without this patch, on a randomly chosen range of commits:
% time git-contacts 25fba78d36be6297^..23c339c0f262aad2 >/dev/null
real 0m6.142s
user 0m5.429s
sys 0m0.356s
With this patch:
% time git-contacts 25fba78d36be6297^..23c339c0f262aad2 >/dev/null
real 0m2.285s
user 0m2.093s
sys 0m0.165s
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-contacts invokes git-blame immediately upon encountering a patch
hunk. No attempt is made to consolidate invocations for multiple hunks
referencing the same file at the same revision. This can become
expensive quickly.
Any effort to reduce the number of times git-blame is run will need to
to know in advance which line ranges to blame per file per revision.
Make this information available by collecting all sources as a distinct
step from invoking git-blame. A subsequent patch will utilize the
information to optimize git-blame invocations.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than calling get_blame() with a zero-length hunk only to have it
rejected immediately, perform hunk-length validation earlier in order to
avoid calling get_blame() unnecessarily.
This is a preparatory step to simplify later patches which reduce the
number of git-blame invocations by collecting together all lines to
blame within a single file at a particular revision. By validating the
blame range early, the subsequent patch can more easily avoid adding
empty ranges at collection time.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Back when the core tutorial was written, `log` and `whatchanged`
were scripted Porcelains. In the "Inspecting Changes" section that
talks about the plumbing commands in the diff family, it made sense
to use `log` and `whatchanged` as good examples of the use of these
plumbing commands, and because even these scripted Porcelains were
novelty (there wasn't the new end-user tutorial written), it made
some sense to illustrate uses of the `git log` (and `git
whatchanged`) scripted Porcelain commands.
But we no longer have scripted `log` and `whatchanged` to serve as
examples, and this document is not where the end users learn what
`git log` command is about. Stop at briefly mentioning the
possibility of combining rev-list with diff-tree to build your own
log, and leave the end-user documentation of `log` to the new
tutorial and the user manual.
Also resurrect the last version of `git-log`, `git-whatchanged`, and
`git-show` to serve as examples to contrib/examples/ directory.
While at it, remove 'whatchanged' from a list of sample commands
that are affected by GIT_FLUSH environment variable. This is not
meant to be an exhaustive list but as a list of typical ones, and an
old command that is kept primarily for backward compatibility does
not belong to it.
Helped-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we have an old organization (v1.8.3), and want to upgrade to a newer
one (v1.8.4), the user would have to fetch the whole repository, instead
we can just move the repository, so the user would not notice any
difference.
Also, remove other clones, so in time they get set up as shared.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Reviewed-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
6796d49 (remote-hg: use a shared repository store) introduced a bug by
making the shared repository '.git/hg', which is already used before
that patch, so clones that happened before that patch, fail after that
patch, because there's no shared Mercurial repo.
So, instead of simply checking if the directory exists, let's always try
to create an empty shared repository to ensure it's there. This works
because we don't need the initial clone, if the repository is shared,
pulling from the child updates the parent's storage; it's exactly the
same as cloning, so we can simplify the shared repo setup this way while
at the same time fixing the problem.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Reviewed-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current code fixes the path to make it absolute when cloning, but
doesn't consider tilde expansion, so that scenario fails throwing an
exception because /home/myuser/~/my/repository doesn't exists:
$ git clone hg::~/my/repository && cd repository && git fetch
Expand the tilde when checking if the path is absolute, so that we don't
fix a path that doesn't need to be.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some email clients (e.g., claws-mail) display the message body
incorrectly when the charset is not defined explicitly in a
Content-Type header. "git log" generates logs in UTF-8 encoding by
default, so add a Content-Type header declaring that encoding to
the emails the post-receive-email example hook sends.
[jn: also setting the Content-Transfer-Encoding so MTAs know what
kind of mangling might be needed when sending to a non 8-bit clean
SMTP host]
Requested-by: Alexander Gerasiov <gq@debian.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git commands write commit messages in UTF-8 by default, but that
default can be overridden by the [i18n] commitEncoding and
logOutputEncoding settings. With such a setting, the emails written
by the post-receive-email hook use a mixture of encodings:
1. Log messages use the configured log output encoding, which is
meant to be whatever encoding works best with local terminals
(and does not have much to do with what encoding should be used
for email)
2. Filenames are left as is: on Linux, usually UTF-8, and in the Mingw
port (which uses Unicode filesystem APIs), always UTF-8
3. The "This is an automated email" preface uses a project description
from .git/description, which is typically in UTF-8 to support
gitweb.
So (1) is configurable, and (2) and (3) are unconfigurable and
typically UTF-8. Override the log output encoding to always use UTF-8
when writing the email to get the best chance of a comprehensible
single-encoding email.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This way the hook doesn't have to keep being tweaked as porcelain
learns new features like color and pagination.
While at it, replace the "git rev-list | git shortlog" idiom with
plain "git shortlog" for simplicity.
Except for depending less on the value of settings like '[log]
abbrevCommit', no change in output intended.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cygwin port added a "not quite correct but a lot faster and good
enough for many lstat() calls that are only used to see if the
working tree entity matches the index entry" lstat() emulation some
time ago, and it started biting us in places. This removes it and
uses the standard lstat() that comes with Cygwin.
Recent topic that uses lstat on packed-refs file is broken when
this cheating lstat is used, and this is a simplest fix that is
also the cleanest direction to go in the long run.
* rj/cygwin-clarify-use-of-cheating-lstat:
cygwin: Remove the Win32 l/stat() implementation
If the libexec directory doesn't exist, git-subtree gets installed as
$prefix/share/libexec/git-core file. This patch creates the directory
before installing git-subtree file into it.
Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`echo -n` is non-portable. The POSIX specification says:
Conforming applications that wish to do prompting without <newline>
characters or that could possibly be expecting to echo a -n, should
use the printf utility derived from the Ninth Edition system.
Since all of the affected shell scripts use a POSIX shell shebang,
replace `echo -n` invocations with printf.
Signed-off-by: Lukas Fleischer <git@cryptocrack.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An enhanced "post-receive" hook to send e-mail messages.
* mh/multimail:
post-receive-email: deprecate script in favor of git-multimail
git-multimail: an improved replacement for post-receive-email
A helper to read from a set of format-patch output files or a range
of commits and find those who may have insights to the code that
the changes touch by running a series of "git blame" commands.
* es/contacts:
contrib: contacts: add documentation
contrib: contacts: add mailmap support
contrib: contacts: interpret committish akin to format-patch
contrib: contacts: add ability to parse from committish
contrib: add git-contacts helper
50c5885e (git-completion.bash: replace zsh notation that breaks bash
3.X, 2013-01-18) fixed a zsh-ism introduced earlier to append to an
array, which older versions of bash (3.0) did not grok. This was
again broken by 734b2f05 (completion: synchronize zsh wrapper,
2013-05-08).
Cherry-pick the fix again to let those with older bash use the
completion script.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do not fail to import mercurial commits with empty commit messages.
Signed-off-by: Maurício C Antunes <mauricio.antunes@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a notice to the top of post-receive-email explaining that the
script is no longer under active development and pointing the user to
git-multimail.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new command to allow scripts to query the mailmap information.
* es/check-mailmap:
t4203: test check-mailmap command invocation
builtin: add git-check-mailmap command
Assuming that git-contacts may some day be promoted to a core git
command, the documentation is written and formatted as if it already
belongs in Documentation/ even though it presently resides in
contrib/contacts.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The purpose of git-contacts is to determine a list of people who might
have some interest in a patch or set of changes. It can be used as
git-send-email's --cc-cmd argument or the computed list might be used to
ask for comments on a proposed change. As such, it is important to
report up-to-date email addresses in the computed list rather than
potentially outdated ones recorded with commits. Apply git's mailmap
functionality to the retrieved contacts in order to achieve this goal.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a convenience, accept the same style <since> committish as accepted
by git-format-patch. For example:
% git contacts origin
will consider commits in the current branch built atop 'origin', just as
"git format-patch origin" will format commits built atop 'origin'.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For example:
% git contacts R1..R2
Committishes and patch files can be mentioned in the same invocation:
% git contacts R1..R2 extra/*.patch
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This script lists people that might be interested in a patch by going
back through the history for each patch hunk, and finding people that
reviewed, acknowledged, signed, authored, or were Cc:'d on the code the
patch is modifying.
It does this by running git-blame incrementally on each hunk and then
parsing the commit message. After gathering all participants, it
determines each person's relevance by considering how many commits
mentioned that person compared with the total number of commits under
consideration. The final output consists only of participants who pass a
minimum threshold of participation.
Several conditions controlling a person's significance are currently
hard-coded, such as minimum participation level, blame date-limiting,
and -C level for detecting moved and copied lines. In the future, these
conditions may become configurable.
For example:
% git contacts 0001-remote-hg-trivial-cleanups.patch
Felipe Contreras <felipe.contreras@gmail.com>
Jeff King <peff@peff.net>
Max Horn <max@quendi.de>
Junio C Hamano <gitster@pobox.com>
Thus, it can be invoked as git-send-email's --cc-cmd option, among other
possible uses.
This is a Perl rewrite of Felipe Contreras' git-related patch series[1]
written in Ruby.
[1]: http://thread.gmane.org/gmane.comp.version-control.git/226065/
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a command to allow previewing the contents locally before
pushing it out, when working with a MediaWiki remote.
I personally do not think this belongs to Git. If you are working
on a set of AsciiDoc source files, you sure do want to locally
format to preview what you will be pushing out, and if you are
working on a set of C or Java source files, you do want to test it
before pushing it out, too. That kind of thing belongs to your
build script, not to your SCM.
But I'll let it pass, as this is only a contrib/ thing.
* bp/mediawiki-preview:
git-remote-mediawiki: add preview subcommand into git mw
git-remote-mediawiki: add git-mw command
git-remote-mediawiki: factoring code between git-remote-mediawiki and Git::Mediawiki
git-remote-mediawiki: update tests to run with the new bin-wrapper
git-remote-mediawiki: add a git bin-wrapper for developement
wrap-for-bin: make bin-wrappers chainable
git-remote-mediawiki: introduction of Git::Mediawiki.pm
Commit adbc0b6b ("cygwin: Use native Win32 API for stat", 30-09-2008)
added a Win32 specific implementation of the stat functions. In order
to handle absolute paths, cygwin mount points and symbolic links, this
implementation may fall back on the standard cygwin l/stat() functions.
Also, the choice of cygwin or Win32 functions is made lazily (by the
first call(s) to l/stat) based on the state of some config variables.
Unfortunately, this "schizophrenic stat" implementation has been the
source of many problems ever since. For example, see commits 7faee6b8,
79748439, 452993c2, 085479e7, b8a97333, 924aaf3e, 05bab3ea and 0117c2f0.
In order to avoid further problems, such as the issue raised by the new
reference handling API, remove the Win32 l/stat() implementation.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add git-multimail, a tool for generating notification emails for
pushes to a Git repository. It is largely plug-in compatible with
post-receive-email, and is proposed to eventually replace that script.
The advantages of git-multimail relative to post-receive-email are
described in README.migrate-from-post-receive-email.
git-multimail is organized in a directory contrib/hooks/multimail.
The directory contains:
* git_multimail.py -- a Python module that can generate notification
emails for pushes to a Git repository. The file can be used
directly as a post-receive script (configured via git config
settings), or it can be imported as a Python module and configured
via arbitrary Python code.
* README -- user-level documentation for configuring and using
git-multimail.
* post-receive -- an example of building a post-receive script that
imports git_multimail.py as a Python module, with an example of how
to change the email templates.
* README.migrate-from-post-receive-email -- documentation targeted at
current users of post-receive-email, explaining the differences and
how to migrate a post-receive-email configuration to git-multimail.
* migrate-mailhook-config -- a script that can migrate a user's
post-receive-email configuration options to the equivalent
git-multimail options.
* README.Git -- a short explanation of the relationship between
git-multimail and the rest of the Git project, plus the exact date
and revision when this version was taken from the upstream project.
All but the last file are taken verbatim from the upstream
git-multimail project.
git-multimail is originally derived from post-receive-email and also
incorporates suggestions from the mailing list as well as patches by
the people listed below.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Contributions-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Contributions-by: Ramkumar Ramachandra <artagnon@gmail.com>
Contributions-by: Chris Hiestand <chrishiestand@gmail.com>
Contributions-by: Michiel Holtkamp <git@elfstone.nl>
Contributions-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce command check-mailmap, similar to check-attr and check-ignore,
which allows direct testing of .mailmap configuration.
As plumbing accessible to scripts and other porcelain, check-mailmap
publishes the stable, well-tested .mailmap functionality employed by
built-in Git commands. Consequently, script authors need not
re-implement .mailmap functionality manually, thus avoiding potential
quirks and behavioral differences.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the current state, a user of git-remote-mediawiki can edit the markup text
locally, but has to push to the remote wiki to see how the page is rendererd.
Add a new 'git mw preview' command that allows rendering the markup text on
the remote wiki without actually pushing any change on the wiki.
This uses Mediawiki's API to render the markup and inserts it in an actual
HTML page from the wiki so that CSS can be rendered properly. Most links
should work when the page exists on the remote.
Signed-off-by: Benoit Person <benoit.person@ensimag.fr>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For now, git-remote-mediawiki is only a remote-helper. This patch adds a new
toolset script in which we will be able to build new tools for
git-remote-mediawiki.
This toolset uses a subcommand-mechanism to launch the proper action. For now
only the 'help' subcommand is implemented. It also provides some generic code
for the verbose and help command line options.
Signed-off-by: Benoit Person <benoit.person@ensimag.fr>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For now, Git::Mediawiki contains nothing.
This first patch moves some of git-remote-mediawiki.perl's factorisable code
into Git::Mediawiki. In the same time, it removes the side effects of that code
and renames the fucntions and constants moved to expose a better API.
Signed-off-by: Benoit Person <benoit.person@ensimag.fr>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Until now, if git-remote-mediawiki was not installed, the test suite
copied it to the toplevel directory. This solution pollutes the
directory with untracked files. Plus, we would need to copy the new
git-mw.perl file to test it too.
Signed-off-by: Benoit Person <benoit.person@ensimag.fr>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The introduction of the Git::Mediawiki package makes it impossible to test,
without installation, git-remote-mediawiki and git-mw.
Using a git bin-wrapper enables us to define proper $GITPERLLIB to force the
use of the developement version of the Git::Mediawiki package, bypassing its
installed version if any.
An alternate solution was to 'install' all the files required at each build
but it pollutes the toplevel with untracked files.
Signed-off-by: Benoit Person <benoit.person@ensimag.fr>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We would want to allow the user to preview what he has edited locally
before pushing it out (and thus creating a non-removable revision in
the mediawiki's history).
This patch introduces a new perl package in which we will be able to
share code between that new tool and the remote helper:
git-remote-mediawiki.perl.
A perl package offers the best way to handle such case: Each script
can select what should be imported in its namespace. The package
namespacing limits the use of side effects in the shared code.
An alternate solution is to concatenate a "toolset" file with each
*.perl when 'make'-ing the project. In that scheme, everything is
imported in the script's namespace. Plus, files should be renamed in
order to chain to Git's toplevel makefile. Hence, this solution is not
acceptable.
Signed-off-by: Benoit Person <benoit.person@ensimag.fr>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit e83d36b66f turned "print STDOUT" into "print {*STDOUT}", as
suggested by perlcritic. Unfortunately, it also changed two "binmode
STDOUT" calls the same way, which does not work and yield a "Not a GLOB
reference" error.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up for in-prompt status script (in contrib/).
* ed/color-prompt:
git-prompt.sh: add missing information in comments
git-prompt.sh: do not print duplicate clean color code
t9903: remove redundant tests
git-prompt.sh: refactor colored prompt code
t9903: add tests for git-prompt pcmode
git-completion.bash's parsing of the command name relies on everything
preceding it starting with '-' unless it is the "-c" option. This
allows users to use the stuck form of "--work-tree=<path>" and
"--namespace=<path>" but not the unstuck forms "--work-tree <path>" and
"--namespace <path>". Fix this.
Similarly, the completion only handles the stuck form "--git-dir=<path>"
and not "--git-dir <path>", so fix this as well.
Signed-off-by: John Keeping <john@keeping.me.uk>
Acked-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mention that the command below is needed for prompt
in ZSH with PS1:
setopt PROMPT_SUBST
Rephrase some parts that mention only the "current branch name"
being displayed in the prompt. Replace it by stating that
the "repository status" is displayed.
Make it clear that colored prompt is only available
in PROMPT_COMMAND/precmd mode.
With-suggestions-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Eduardo R. D'Avila <erdavila@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do not print a duplicate clean color code when there
is no other indicators other than the current branch
in colored prompt.
Acked-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Eduardo R. D'Avila <erdavila@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
__git_ps1_colorize_gitstring() sets color codes and
builds the prompt gitstring. It has duplicated code
to handle color codes for bash and zsh shells.
__git_ps1() also has duplicated logic to build the
prompt gitstring.
Remove duplication of logic to build gitstring in
__git_ps1_colorize_gitstring() and __git_ps1().
Leave in __git_ps1_colorize_gitstring() only logic
to set color codes.
Signed-off-by: Eduardo R. D'Avila <erdavila@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
__git_ps1() is usually added to the prompt inside a command
substitution, imposing the overhead of fork()ing a subshell. Using
__git_ps1() for $PROMPT_COMMAND is slightly faster, because it avoids
that command substitution.
Mention this in the comments about setting up the git prompt.
The whole series speeds up the bash prompt on Windows/MSysGit
considerably. Here are some timing results in three scenarios, each
repeated 10 times:
At the top of the work tree, before:
$ time for i in {0..9} ; do prompt="$(__git_ps1)" ; done
real 0m1.716s
user 0m0.301s
sys 0m0.772s
After:
real 0m0.687s
user 0m0.075s
sys 0m0.396s
After, from $PROMPT_COMMAND:
$ time for i in {0..9} ; do __git_ps1 '\h:\w' '$ ' ; done
real 0m0.546s
user 0m0.075s
sys 0m0.181s
At the top of the work tree, detached head, before:
real 0m2.574s
user 0m0.376s
sys 0m1.207s
After:
real 0m1.139s
user 0m0.151s
sys 0m0.500s
After, from $PROMPT_COMMAND:
real 0m1.030s
user 0m0.245s
sys 0m0.336s
In a subdirectory, during rebase, stash status indicator enabled,
before:
real 0m3.557s
user 0m0.495s
sys 0m1.767s
After:
real 0m0.717s
user 0m0.120s
sys 0m0.300s
After, from $PROMPT_COMMAND:
real 0m0.577s
user 0m0.047s
sys 0m0.258s
On Linux the speedup ratio is comparable to Windows, but overall it
was about an order of magnitude faster to begin with. The last case
from above, repeated 100 times, before:
$ time for i in {0..99} ; do prompt="$(__git_ps1)" ; done
real 0m2.806s
user 0m0.180s
sys 0m0.264s
After:
real 0m0.857s
user 0m0.020s
sys 0m0.028s
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Before setting $PS1, __git_ps1() uses a command substitution to
redirect the output from a printf into a variable. Spare the overhead
of fork()ing a subshell by using 'printf -v <var>' to directly assign
the output to that variable.
zsh's printf doesn't support the '-v <var>' option, so stick with the
command substitution when under zsh.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
When enabled, the bash prompt can indicate the presence of untracked
files with a '%' sign. __git_ps1() checks for untracked files by running the
'$(git ls-files --others --exclude-standard)' command substitution,
and displays the indicator when there is no output.
Avoid this command substitution by additionally passing
'--error-unmatch *', and checking the command's return value.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
When the environment variable $GIT_PS1_SHOWSTASHSTATE is set
__git_ps1() checks the presence of stashes by running 'git rev-parse
--verify refs/stash'. This command not only checks that the
'refs/stash' ref exists but also, well, verifies that it's a valid
ref.
However, we don't need to be that thorough for the bash prompt. We
can omit that verification and only check whether 'refs/stash' exists
or not. Since 'git pack-refs' never packs 'refs/stash', it's a matter
of checking the existence of a ref file. Perform this check using
only bash builtins to spare the overhead of fork()+exec()ing a git
process.
Also run 'git pack-refs --all' in the corresponding test to document
that the prompt script depends on 'git pack-refs' not packing
'refs/stash' and to catch possible breakages should this behavior ever
change.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
When the dirty work tree and index status indicator is enabled,
__git_ps1() checks for changes in the index by running 'git diff-index
--cached --quiet HEAD --' and looking at its exit code. However, that
makes sense only when HEAD points to a valid commit: on an unborn
branch the failure of said command would be caused by the invalid
HEAD, not by changes in the index. Therefore, __git_ps1() first
checks for a valid HEAD by running 'git rev-parse --quiet --verify
HEAD'.
Since the previous patch we implicitly check HEAD's validity by
running 'git rev-parse ... --short HEAD', making the dirty status
indicator's 'git rev-parse' check redundant. It's sufficient to check
for non-emptyness of the variable holding the abbreviated commit
object name, thereby sparing the overhead of fork()+exec()ing a git
process.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
When describing a detached HEAD according to the $GIT_PS1_DESCRIBE
environment variable fails, __git_ps1() now runs the '$(git rev-parse
--short HEAD)' command substitution to get the abbreviated detached
HEAD commit object name. This imposes the overhead of fork()ing a
subshell and fork()+exec()ing a git process.
Avoid this overhead by combining this command substitution with the
"main" 'git rev-parse' execution for getting the path to the .git
directory & co. This means that we'll look for the abbreviated commit
object name even when it's not necessary, because we're on a branch or
the detached HEAD can be described. It doesn't matter, however,
because once 'git rev-parse' is up and running to fulfill all those
other queries, the additional overhead of looking for the abbreviated
commit object name is not measurable because it's lost in the noise.
There is a caveat, however, when we are on an unborn branch, because
in that case HEAD doesn't point to a valid commit, hence the query for
the abbreviated commit object name fails. Therefore, '--short HEAD'
must be the last options to 'git rev-parse' in order to get all the
other necessary information for the prompt even on an unborn branch.
Furthermore, in that case, and in that case only, 'git rev-parse'
doesn't output the last line containing the abbreviated commit object
name, obviously, so we have to take care to only parse it if 'git
rev-parse' exited without any error.
Although there are tests already excercising __git_ps1() on unborn
branches, they all do so implicitly. Add a test that checks this
explicitly.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
There are a couple of '$(git rev-parse --<opt>)' command substitutions
in __git_ps1() and three of them are executed in the main code path:
- the first to get the path to the .git directory ('--git-dir'),
- the second to check whether we're inside the .git directory
('--is-inside-git-dir'),
- and the last, depending on the results of the second, either
* to check whether it's a bare repo ('--is-bare-repository'), or
* to check whether inside a work tree ('--is-inside-work-tree').
Naturally, this imposes the overhead of fork()ing three subshells and
fork()+exec()ing three git commands.
Combine these four 'git rev-parse' queries into a single one and use
bash parameter expansions to parse the combined output, i.e. to
separate the path to the .git directory from the true/false of
'--is-inside-git-dir', etc. This way we can eliminate two of the
three subshells and git commands.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
__git_ps1() runs the '$(git symbolic-ref HEAD)' command substitution
to find out whether we are on a branch and to find out the name of
that branch. This imposes the overhead of fork()ing a subshell and
fork()+exec()ing a git process.
Since HEAD is in most cases a single-line file and the symbolic ref
format is quite simple to recognize and parse, read and parse it using
only bash builtins, thereby sparing all that fork()+exec() overhead.
Don't display the git prompt if reading HEAD fails, because a readable
HEAD is required for a git repository. HEAD can also be a symlink
symbolic ref (due to 'core.preferSymlinkRefs'), so use bash builtins
for reading HEAD only when HEAD is not a symlink.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
During an ongoing interactive rebase __git_ps1() finds out the name of
the rebased branch, the total number of patches and the number of the
current patch by executing a '$(cat .git/rebase-merge/<FILE>)' command
substitution for each. That is not quite the most efficient way to
read single line single word files, because it imposes the overhead of
fork()ing a subshell and fork()+exec()ing 'cat' several times.
Use the 'read' bash builtin instead to avoid those overheads.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
__git_ps1() finds out the path to the repository by using the
__gitdir() helper function. __gitdir() is basically just a wrapper
around 'git rev-parse --git-dir', extended with support for
recognizing a remote repository given as argument, to use the path
given on the command line, and with a few shortcuts to recognize a git
repository in cwd or at $GIT_DIR quickly without actually running 'git
rev-parse'. However, the former two is only necessary for the
completion script but makes no sense for the bash prompt, while the
latter shortcuts are performance optimizations __git_ps1() can do
without (they just avoid the overhead of fork()+exec()ing a git
process).
Run 'git rev-parse --git-dir' directly in __git_ps1(), because it will
allow this patch series to combine several $(git rev-parse ...)
command substitutions in the main code path, and the overall
performance benefit will far outweigh the loss of those few shortcuts
in __gitdir(). Furthermore, since __gitdir() is not needed anymore
for the prompt, remove it from the prompt script finally eliminating
its duplication between the prompt and completion scripts. Also
remove the comment from the completion script warning about this code
duplication.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
... to gain one level of indentation for the bulk of the function.
(The patch looks quite unreadable, you'd better check it with 'git
diff -w'.)
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
When describing a detached HEAD according to the $GIT_PS1_DESCRIBE
environment variable fails, __git_ps1() runs 'cut -c1-7 .git/HEAD' to
show the 7 hexdigits abbreviated commit object name in the prompt.
Obviously, this neither respects core.abbrev nor produces a unique
object name.
Fix this by using 'git rev-parse --short HEAD' instead and adjust the
corresponding test to use non-standard number of hexdigits.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
* cm/remote-mediawiki-perlcritique: (31 commits)
git-remote-mediawiki: make error message more precise
git-remote-mediawiki: add a perlcritic rule in Makefile
git-remote-mediawiki: add a .perlcriticrc file
git-remote-mediawiki: clearly rewrite double dereference
git-remote-mediawiki: fix a typo ("mediwiki" instead of "mediawiki")
git-remote-mediawiki: put non-trivial numeric values in constants.
git-remote-mediawiki: don't use quotes for empty strings
git-remote-mediawiki: replace "unless" statements with negated "if" statements
git-remote-mediawiki: brace file handles for print for more clarity
git-remote-mediawiki: modify strings for a better coding-style
git-remote-mediawiki: put long code into a subroutine
git-remote-mediawiki: remove import of unused open2
git-remote-mediawiki: check return value of open
git-remote-mediawiki: assign a variable as undef and make proper indentation
git-remote-mediawiki: rename a variable ($last) which has the name of a keyword
git-remote-mediawiki: remove unused variable $entry
git-remote-mediawiki: turn double-negated expressions into simple expressions
git-remote-mediawiki: change the name of a variable
git-remote-mediawiki: add newline in the end of die() error messages
git-remote-mediawiki: change style in a regexp
...
