Make git-branch, git-show-branch, git-grep, and all the diff-based
programs accept an optional argument <when> for --color. The argument
is a colorbool: "always", "never", or "auto". If no argument is given,
"always" is used; --no-color is an alias for --color=never. This makes
the command-line interface consistent with other GNU tools, such as `ls'
and `grep', and with the git-config color options. Note that, without
an argument, --color and --no-color work exactly as before.
To implement this, two internal changes were made:
1. Allow the first argument of git_config_colorbool() to be NULL,
in which case it returns -1 if the argument isn't "always", "never",
or "auto".
2. Add OPT_COLOR_FLAG(), OPT__COLOR(), and parse_opt_color_flag_cb()
to the option parsing library. The callback uses
git_config_colorbool(), so color.h is now a dependency
of parse-options.c.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is misleading to say that we pull refs from $GIT_DIR/refs/*, because we
may also consult the packed refs mechanism. These days we tend to treat
the "refs hierarchy" as more of an abstract namespace that happens to be
represented as $GIT_DIR/refs. At best, this is a minor inaccuracy, but at
worst it can confuse users who then look in $GIT_DIR/refs and find that it
is missing some of the refs they expected to see.
This patch drops most uses of "$GIT_DIR/refs/*", changing them into just
"refs/*", under the assumption that users can handle the concept of an
abstract refs namespace. There are a few things to note:
- most cases just dropped the $GIT_DIR/ portion. But for cases where
that left _just_ the word "refs", I changed it to "refs/" to help
indicate that it was a hierarchy. I didn't do the same for longer
paths (e.g., "refs/heads" remained, instead of becoming
"refs/heads/").
- in some cases, no change was made, as the text was explicitly about
unpacked refs (e.g., the discussion in git-pack-refs).
- In some cases it made sense instead to note the existence of packed
refs (e.g., in check-ref-format and rev-parse).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, the documentation suggests that 'git merge-base -a' and 'git
show-branch --merge-base' are equivalent (in fact it claims that the
former cannot handle more than two revs).
Alas, the handling of more than two revs is very different. Document
this by tests and correct the documentation to reflect this.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure that usage strings and documentation coincide with each other
and with the actual code.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Copy the description of date-order from rev-list-options.txt, and then
reword it to be commit specific. While we're at it, put <rev> <glob>...
on a new line to not exceed 80 characters.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mh/show-branch-color:
bash completion: show-branch color support
show-branch: color the commit status signs
Conflicts:
contrib/completion/git-completion.bash
Add a missing quote and properly escape the ' character so docs don't
look odd. Add 'the' to make some sentences more gramatically correct.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it possible to color the status character ('*' '!' '+' '-') of each
commit corresponding to the branch it's in. This makes it easier to
follow a particular branch, especially if there are larger gaps in the
output.
Add the config option color.showbranch and the command line options
--color and --no-color to control the colored output.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The displayed example is typeset with acute accents around the string that
should be surrounded by a pair of single quotes in manpage. Replace them
with double quotes (the semantics of the example does not change).
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Following what appears to be the predominant style, format
names of commands and commandlines both as `teletype text`.
While we're at it, add articles ("a" and "the") in some
places, italicize the name of the command in the manual page
synopsis line, and add a comma or two where it seems appropriate.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)
This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.
The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The OPTIONS section of a documentation file contains a list
of the options a git command accepts.
Currently there are several variants to describe the case that
different options (almost) do the same in the OPTIONS section.
Some are:
-f, --foo::
-f|--foo::
-f | --foo::
But AsciiDoc has the special form:
-f::
--foo::
This patch applies this form to the documentation of the whole git suite,
and removes useless em-dash prevention, so \--foo becomes --foo.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now we have a separate reflog on HEAD, show-branch -g without an explicit
parameter defaults to the current branch, or HEAD when it is detached
from branches.
Signed-off-by: Junio C Hamano <junkio@cox.net>
A short-hand "-g" for "git log --walk-reflogs" and "git
show-branch --reflog" makes it easier to access the reflog
info.
[jc: added -g to show-branch for symmetry]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This changes the output so the list at the top shows the reflog
message, along with their relative timestamps.
You can use --reflog=<n> to show <n> most recent log entries, or
use --reflog=<n>,<b> to show <n> entries going back from the
entry <b>. <b> can be either a number (so --reflog=4,20 shows 4
records starting from @{20}) or a timestamp (e.g. --reflog='4,1 day').
Here is a sample output (with --list option):
$ git show-branch --reflog=10 --list jc/show-reflog
[jc/show-reflog@{0}] (3 minutes ago) commit (amend): show-branch --ref
[jc/show-reflog@{1}] (5 minutes ago) reset HEAD^
[jc/show-reflog@{2}] (14 minutes ago) commit: show-branch --reflog: sho
[jc/show-reflog@{3}] (14 minutes ago) commit: show-branch --reflog: sho
[jc/show-reflog@{4}] (18 minutes ago) commit (amend): Extend read_ref_a
[jc/show-reflog@{5}] (18 minutes ago) commit (amend): Extend read_ref_a
[jc/show-reflog@{6}] (18 minutes ago) commit (amend): Extend read_ref_a
[jc/show-reflog@{7}] (18 minutes ago) am: read_ref_at(): allow retrievi
[jc/show-reflog@{8}] (18 minutes ago) reset --hard HEAD~4
[jc/show-reflog@{9}] (61 minutes ago) commit: show-branch --reflog: use
This shows what I did more cleanly:
$ git show-branch --reflog=10 jc/show-reflog
! [jc/show-reflog@{0}] (3 minutes ago) commit (amend): show-branch --ref
! [jc/show-reflog@{1}] (5 minutes ago) reset HEAD^
! [jc/show-reflog@{2}] (14 minutes ago) commit: show-branch --reflog:
! [jc/show-reflog@{3}] (14 minutes ago) commit: show-branch --reflog:
! [jc/show-reflog@{4}] (18 minutes ago) commit (amend): Extend read_
! [jc/show-reflog@{5}] (18 minutes ago) commit (amend): Extend read
! [jc/show-reflog@{6}] (18 minutes ago) commit (amend): Extend rea
! [jc/show-reflog@{7}] (18 minutes ago) am: read_ref_at(): allow
! [jc/show-reflog@{8}] (18 minutes ago) reset --hard HEAD~4
! [jc/show-reflog@{9}] (61 minutes ago) commit: show-branch --r
----------
+ [jc/show-reflog@{0}] show-branch --reflog: show the reflog
+ [jc/show-reflog@{2}] show-branch --reflog: show the reflog
+++ [jc/show-reflog@{1}] show-branch --reflog: show the reflog
+++++ [jc/show-reflog@{4}] Extend read_ref_at() to be usable fro
+ [jc/show-reflog@{5}] Extend read_ref_at() to be usable fro
+ [jc/show-reflog@{6}] Extend read_ref_at() to be usable fro
+ [jc/show-reflog@{7}] read_ref_at(): allow retrieving the r
+ [jc/show-reflog@{9}] show-branch --reflog: use updated rea
+ [jc/show-reflog@{9}^] read_ref_at(): allow reporting the c
+ [jc/show-reflog@{9}~2] show-branch --reflog: show the refl
+ [jc/show-reflog@{9}~3] read_ref_at(): allow retrieving the
++++++++++ [jc/show-reflog@{8}] dwim_ref(): Separate name-to-ref DWIM
At @{9}, I had a commit to complete 5 patch series, but I wanted
to consolidate two commits that enhances read_ref_at() into one
(they were @{9}^ and @{9}~3), and another two that touch show-branch
into one (@{9} and @{9}~2).
I first saved them with "format-patch -4", and then did a reset
at @{8}. At @{7}, I applied one of them with "am", and then
used "git-apply" on the other one, and amended the commit at
@{6} (so @{6} and @{7} has the same parent). I did not like the
log message, so I amended again at @{5}.
Then I cherry-picked @{9}~2 to create @{3} (the log message
shows that it needs to learn to set GIT_REFLOG_ACTION -- it uses
"git-commit" and the log entry is attributed for it). Another
cherry-pick built @{2} out of @{9}, but what I wanted to do was
to squash these two into one, so I did a "reset HEAD^" at @{1}
and then made the final commit by amending what was at the top.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Branch has "-r" for remote branches and "-a" for local and remote.
It seems logical to mirror that in show-branch. Also removes the
dubiously useful "--tags" option (as part of changing the meaning
for "--all").
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add a quick paragraph explaining the --topics option for show-branch.
The explanation is an abbreviated version of the commit message from
d320a5437f.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With this, the command includes the current branch to the list
of revs to be shown when it is not given on the command line.
This is handy to use in the configuration file like this:
[showbranch]
default = --current
default = heads/* ; primary branches, not topics under
; subdirectories
Signed-off-by: Junio C Hamano <junkio@cox.net>
This changes the character used to mark the commits that is on the
branch from '+' to '*' for the current branch, to make it stand out.
Also we show '-' for merge commits.
When you have a handful branches with relatively long diversion, it
is easier to see which one is the current branch this way.
Signed-off-by: Junio C Hamano <junkio@cox.net>
With this, you can say "git-show-branch topic/* master" to show
all the topic branches you have under .git/refs/heads/topic/ and
your master branch. Another example is "git-show-branch --list
v1.0*" to show all the v1.0 tags. You can disambiguate by
saying "heads/topic/*" to show only topic branches if you have
tags under .git/refs/tags/topic/ as well.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-show-branch acquires two new options. --sha1-name to name
commits using the unique prefix of their object names, and
--no-name to not to show names at all.
This was outlined in <7vk6gpyuyr.fsf@assigned-by-dhcp.cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The synopsis of the manpages should use the hyphenated version of the git
commands. Adapt the remaining offenders.
Signed-off-by: Christian Meder <chris@absolutegiganten.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The replacement was performed automatically by these commands:
perl -pi -e 's/link:(git.+)\.html\[\1\]/gitlink:$1\[1\]/g' \
README Documentation/*.txt
perl -pi -e 's/link:git\.html\[git\]/gitlink:git\[7\]/g' \
README Documentation/*.txt
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The --list option is what 'git branch' without parameter should
have been; it shows the one-line commit message for each branch
name. The --independent option is used to filter out commits
that can be reachable from other commits, to make detection of
fast forward condition in multi-head merge easier.
Signed-off-by: Junio C Hamano <junkio@cox.net>
As promised, this is the "big tool rename" patch. The primary differences
since 0.99.6 are:
(1) git-*-script are no more. The commands installed do not
have any such suffix so users do not have to remember if
something is implemented as a shell script or not.
(2) Many command names with 'cache' in them are renamed with
'index' if that is what they mean.
There are backward compatibility symblic links so that you and
Porcelains can keep using the old names, but the backward
compatibility support is expected to be removed in the near
future.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When showing only one branch a lot of default output becomes redundant,
so clean it up a bit, and document what is shown. Retire the earlier
implementation "git-show-branches-script".
Signed-off-by: Junio C Hamano <junkio@cox.net>
