Port JGit's HistogramDiff algorithm over to C. Rough numbers (TODO) show
that it is faster than its --patience cousin, as well as the default
Meyers algorithm.
The implementation has been reworked to use structs and pointers,
instead of bitmasks, thus doing away with JGit's 2^28 line limit.
We also use xdiff's default hash table implementation (xdl_hash_bits()
with XDL_HASHLONG()) for convenience.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Group the test cases into two functions, test_diff_(frobnitz|unique).
This in preparation for the histogram diff algorithm, which would also
re-use these test cases.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michael J Gruber noticed that under /bin/dash this test failed
(as is expected -- \n in the string can be interpreted by the
command), while it passed with bash. We probably could work it
around by using backquote in front of it, but it is safer and
more readable to avoid "echo" altogether in a case like this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we run tests under valgrind, we symlink anything
executable that starts with git-* or test-* into a special
valgrind bin directory, and then make that our
GIT_EXEC_PATH.
However, shell libraries like git-sh-setup do not have the
executable bit marked, and did not get symlinked. This
means that any test looking for shell libraries in our
exec-path would fail to find them, even though that is a
fine thing to do when testing against a regular git build
(or in a git install, for that matter).
t2300 demonstrated this problem. The fix is to symlink these
shell libraries directly into the valgrind directory.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The valgrind target just reinvokes make with GIT_TEST_OPTS
set to "--valgrind". However, it does this using an
environment variable, which means GIT_TEST_OPTS in your
config.mak would override it, and "make valgrind" would
simply run the test suite without valgrind on.
Instead, we should pass GIT_TEST_OPTS on the command-line,
overriding what's in config.mak, and take care to append to
whatever the user has there already.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
refs.c had a error message "Trying to write ref with nonexistant object".
And no tests relied on the wrong spelling.
Also typo was present in some test scripts internals, these tests still pass.
Signed-off-by: Dmitry Ivankov <divanorama@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
v1.7.6-rc0~27^2~4 (gitweb: Change the way "content tags" ('ctags') are
handled, 2011-04-29) tried to make gitweb's tag cloud feature more
intuitive for webmasters by checking whether the ctags/<label> under
a project's .git dir contains a number (representing the strength of
association to <label>) before treating it as one.
With that change, after putting '$feature{'ctags'}{'default'} = [1];'
in your $GITWEB_CONFIG, you could do
echo Linux >.git/ctags/linux
and gitweb would treat that as a request to tag the current repository
with the Linux tag, instead of the previous behavior of writing an
error page embedded in the projects list that triggers error messages
from Chromium and Firefox about malformed XML.
Unfortunately the pattern (\d+) used to match numbers is too loose,
and the "XML declaration allowed only at the start of the document"
error can still be experienced if you write "Linux-2.6" in place of
"Linux" in the example above. Fix it by tightening the pattern to
^\d+$.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the same test and prerequisite as introduced in similar
fix in 650af7ae8b.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bc/maint-status-z-to-use-porcelain:
builtin/commit.c: set status_format _after_ option parsing
t7508: demonstrate status's failure to use --porcelain format with -z
Conflicts:
builtin/commit.c
* jk/format-patch-am:
format-patch: preserve subject newlines with -k
clean up calling conventions for pretty.c functions
pretty: add pp_commit_easy function for simple callers
mailinfo: always clean up rfc822 header folding
t: test subject handling in format-patch / am pipeline
Conflicts:
builtin/branch.c
builtin/log.c
commit.h
We stop looking for changes early with QUICK, so our diff
queue contains only a subset of the changes. However, we
don't apply diff filters until later; it will appear at that
point as though there are no changes matching our filter,
when in reality we simply didn't keep looking for changes
long enough.
Commit 2cfe8a6 (diff --quiet: disable optimization when
--diff-filter=X is used, 2011-03-16) fixes this in some
cases by disabling the optimization when a filter is
present. However, it only tweaked run_diff_files, missing
the similar case in diff_tree. Thus the fix worked only for
diffing the working tree and index, but not between trees.
Noticed by Yasushi SHOJI.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/maint-config-alias-fix:
handle_options(): do not miscount how many arguments were used
config: always parse GIT_CONFIG_PARAMETERS during git_config
git_config: don't peek at global config_parameters
config: make environment parsing routines static
Conflicts:
config.c
If you give a zero-length subject prefix to format-patch
(e.g., "format-patch --subject-prefix="), we will print the
ugly:
Subject: [ 1/2] your subject here
because we always insert a space between the prefix and
numbering. Requiring the user to provide the space in their
prefix would be more flexible, but would break existing
usage. This patch provides a DWIM and suppresses the space
for zero-length prefixes, under the assumption that nobody
actually wants "[ 1/2]".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mk/grep-pcre:
git-grep: Fix problems with recently added tests
git-grep: Update tests (mainly for -P)
Makefile: Pass USE_LIBPCRE down in GIT-BUILD-OPTIONS
git-grep: update tests now regexp type is "last one wins"
git-grep: do not die upon -F/-P when grep.extendedRegexp is set.
git-grep: Bail out when -P is used with -F or -E
grep: Add basic tests
configure: Check for libpcre
git-grep: Learn PCRE
grep: Extract compile_regexp_failed() from compile_regexp()
grep: Fix a typo in a comment
grep: Put calls to fixmatch() and regmatch() into patmatch()
contrib/completion: --line-number to git grep
Documentation: Add --line-number to git-grep synopsis
Brian Gernhardt reported that test 'git grep -E -F -G a\\+b' fails on
OS X 10.6.7. This is because I assumed \+ is part of BRE, which isn't
true on all platforms.
The easiest way to make this test pass is to just update expected
output, but that would make the test pointless. Its real purpose is to
check whether 'git grep -E -F -G' is different from 'git grep -E -G -F'.
To check that, let's change pattern to "a+b*c". This should return
different match for -G, -F and -E.
I also made two small tweaks to the tests. First, I added path "ab" to
all calls to future-proof tests. Second, I updated last two tests to
better show that 'git grep -P -E' is different from 'git grep -E -P'.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/notes-batch-removal:
show: --ignore-missing
notes remove: --stdin reads from the standard input
notes remove: --ignore-missing
notes remove: allow removing more than one
'git status' should use --porcelain output format when -z is given.
It was not doing so since the _effect_ of using -z, namely that
null_termination would be set, was being checked _before_ option parsing
was performed.
So, move the check so that it is performed after option parsing.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'git status' is supplied the -z switch, and no output format has been
selected, it is supposed to use the --porcelain format. This does not
happen. Instead, the standard long format is used. Add a test to
demonstrate this failure.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we finish a rebase, our detached HEAD is at the final
result. We update the original branch ref with this result,
and then point the HEAD symbolic ref at the updated branch.
We write a reflog for the branch update, but not for the
update of HEAD.
Because we're already at the final result on the detached
HEAD, moving to the branch actually doesn't change our
commit sha1 at all. So in that sense, a reflog entry would
be pointless.
However, humans do read reflogs, and an entry saying "rebase
finished: returning to refs/heads/master" can be helpful in
understanding what is going on.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In older versions of git, we used rfc822 header folding to
indicate that the original subject line had multiple lines
in it. But since a1f6baa (format-patch: wrap long header
lines, 2011-02-23), we now use header folding whenever there
is a long line.
This means that "git am" cannot trust header folding as a
sign from format-patch that newlines should be preserved.
Instead, format-patch needs to signal more explicitly that
the newlines are significant. This patch does so by
rfc2047-encoding the newlines in the subject line. No
changes are needed on the "git am" end; it already decodes
the newlines properly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without the "-k" option, mailinfo will convert a folded
subject header like:
Subject: this is a
subject that doesn't
fit on one line
into a single line. With "-k", however, we assumed that
these newlines were significant and represented something
that the sending side would want us to preserve.
For messages created by format-patch, this assumption was
broken by a1f6baa (format-patch: wrap long header lines,
2011-02-23). For messages sent by arbitrary MUAs, this was
probably never a good assumption to make, as they may have
been folding subjects in accordance with rfc822's line
length recommendations all along.
This patch now joins folded lines with a single whitespace
character. This treats header folding purely as a syntactic
feature of the transport mechanism, not as something that
format-patch is trying to tell us about the original
subject.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit a1f6baa (format-patch: wrap long header lines,
2011-02-23) changed format-patch's behavior with respect to
long header lines, but made no accompanying changes to the
receiving side. It was thought that "git am" would handle
these folded subjects fine, but there is a regression when
using "am -k".
Let's add a test documenting this. While we're at it, let's
give more complete test coverage to document what should be
happening in each case. We test three types of subjects:
a short one, one long enough to require wrapping, and a
multiline subject. For each, we test these three
combinations:
format-patch | am
format-patch -k | am
format-patch -k | am -k
We don't bother testing "format-patch | am -k", which is
nonsense (you will be adding in [PATCH] cruft to each
subject).
This reveals the regression above (long subjects have
linebreaks introduced via "format-patch -k | am -k"),
as well as an existing non-optimal behavior (multiline
subjects are not preserved using "-k").
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 13fc2c1 (remote: disallow some nonsensical option
combinations, 2011-03-30) made it impossible to use "remote
add -t foo --mirror". The argument was that specifying
specific branches is useless because:
1. Push mirrors do not want a refspec at all.
2. The point of fetch mirroring is to use a broad refspec
like "refs/*", but using "-t" overrides that.
Point (1) is valid; "-t" with push mirrors is useless. But
point (2) ignored another side effect of using --mirror: it
fetches the refs directly into the refs/ namespace as they
are found upstream, instead of placing them in a
separate-remote layout.
So 13fc2c1 was overly constrictive, and disallowed
reasonable specific-branch mirroring, like:
git remote add -t heads/foo -t heads/bar --mirror=fetch
which makes the local "foo" and "bar" branches direct
mirrors of the remote, but does not fetch anything else.
This patch restores the original behavior, but only for
fetch mirrors.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/userdiff-perl-updates:
userdiff/perl: tighten BEGIN/END block pattern to reject here-doc delimiters
tests: make test_expect_code quieter on success
userdiff/perl: catch sub with brace on second line
userdiff/perl: match full line of POD headers
userdiff/perl: anchor "sub" and "package" patterns on the left
t4018 (funcname patterns): minor cleanups
t4018 (funcname patterns): make configuration easier to track
t4018 (funcname patterns): make .gitattributes state easier to track
* jn/ctags-more:
gitweb: Optional grouping of projects by category
gitweb: Modularized git_get_project_description to be more generic
gitweb: Split git_project_list_body in two functions
* jk/git-connection-deadlock-fix:
test core.gitproxy configuration
send-pack: avoid deadlock on git:// push with failed pack-objects
connect: let callers know if connection is a socket
connect: treat generic proxy processes like ssh processes
Conflicts:
connect.c
* jc/bigfile:
Bigfile: teach "git add" to send a large file straight to a pack
index_fd(): split into two helper functions
index_fd(): turn write_object and format_check arguments into one flag
The option can be used to check if read-tree with the same set of other
options like "-m" and "-u" would succeed without actually changing either
the index or the working tree.
The relevant tests in the t10?? range were extended to do a read-tree -n
before the real read-tree to make sure neither the index nor any local
files were changed with -n and the same exit code as without -n is
returned. The helper functions added for that purpose reside in the new
t/lib-read-tree.sh file.
The only exception is #13 in t1004 ("unlinking an un-unlink-able
symlink"). As this is an issue of wrong directory permissions it is not
detected with -n.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The handle_options() function advances the base of the argument array and
returns the number of arguments it used. The caller in handle_alias()
wants to reallocate the argv array it passes to this function, and
attempts to do so by subtracting the returned value to compensate for the
change handle_options() makes to the new_argv.
But handle_options() did not correctly count when "-c <config=value>" is
given, causing a wrong pointer to be passed to realloc().
Fix it by saving the original argv at the beginning of handle_options(),
and return the difference between the final value of argv, which will
relieve the places that move the array pointer from the additional burden
of keeping track of "handled" counter.
Noticed-by: Kazuki Tsujimoto
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously we parsed GIT_CONFIG_PARAMETERS lazily into a
linked list, and then checked that list during future
invocations of git_config. However, that ignores the fact
that the environment variable could change during our run
(e.g., because we parse more "-c" as part of an alias).
Instead, let's just re-parse the environment variable each
time. It's generally not very big, and it's no more work
than parsing the config files, anyway.
As a bonus, we can ditch all of the linked list storage code
entirely, making the code much simpler.
The test unfortunately still does not pass because of an
unrelated bug in handle_options.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add few more tests for "-P/--perl-regexp" option of "git grep".
While at it, add some generic tests for grep.extendedRegexp config option,
for detecting invalid regexep and check if "last one wins" rule works for
selecting regexp type.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A naive method of treating BEGIN/END blocks with a brace on the second
line as diff/grep funcname context involves also matching unrelated
lines that consist of all-caps letters:
sub foo {
print <<'EOF'
text goes here
...
EOF
... rest of foo ...
}
That's not so great, because it means that "git diff" and "git grep
--show-function" would write "=EOF" or "@@ EOF" as context instead of
a more useful reminder like "@@ sub foo {".
To avoid this, tighten the pattern to only match the special block
names that perl accepts (namely BEGIN, END, INIT, CHECK, UNITCHECK,
AUTOLOAD, and DESTROY). The list is taken from perl's toke.c.
Suggested-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
