Unfortunately, git-for-each-refs is currently unusable for peeking into tag
comments, since it uses freed pointers, so it just prints out all sort of
garbage.
This makes it strdup() contents and body values.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The heuristics to give up deltification when both the source and the
target are both in the same pack affects negatively when we are
repacking the subset of objects in the existing pack. This caused
any incremental updates to use suboptimal packs. Tweak the heuristics
to avoid this problem.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Ok, this is a _really_ stupid case, and I don't think it matters, but hey,
we should never SIGSEGV.
Steps to reproduce:
mkdir duh
cd duh
git init-db
git-fmt-merge-msg < /dev/null
will cause a SIGSEGV in cmd_fmt_merge_msg(), because we're doing a
strncmp() with a NULL current_branch.
And yeah, it's an insane schenario, and no, it doesn't really matter. The
only reason I noticed was that a broken version of my "git pull" into an
empty directory would cause this.
This silly patch just replaces the SIGSEGV with a controlled exit with an
error message.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We used to complain that we cannot merge anything we fetched
with a local branch that does not exist yet. Just treat the
case as a natural extension of fast forwarding and make the
local branch'es tip point at the same commit we just fetched.
After all an empty repository without an initial commit is an
ancestor of any commit.
[jc: I added a trivial test. We've become sloppy but we should
stick to the discipline of covering new behaviour with new
tests. ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Although I converted upstream coreutils to git last month, I just
reconverted coreutils once again, as a test, and ended up with a
git repository of about 130MB (contrast with my packed git repo of
size 52MB). That was because there were a lot of commits (but < 1024)
after the final automatic "git-repack -a -d".
Running a final
git-repack -a -d && git-prune-packed
cut the final repository size down to the expected size.
So this looks like an easy way to improve git-cvsimport.
Just run "git repack ..." at the end if there's more than
some reasonable amount of not-packed data.
My choice of 1MB is a little arbitrarily. I wouldn't mind missing
the minimal repo size by 1MB. At the other end of the spectrum,
it's probably not worthwhile to pack everything when the total
repository size is less than 1MB.
Here's the patch:
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Looks like a repo.or.cz-specific change slipped in.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It is often wanted on the #git channel that this were to work to
recover removed directory:
rm -fr Documentation
git checkout -- Documentation
git checkout HEAD -- Documentation ;# alternatively
Now it does.
Signed-off-by: Junio C Hamano <junkio@cox.net>
"git-index-pack --fix-thin" relies on mmap() not changing the current
file position (otherwise the pack will be corrupted when writing the
final SHA1). Meet that expectation.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We do not even know number of lines so showing it as 0 0 is
lying. This would also help Porcelains like cvsexportcommit.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Rework cvsexportcommit to handle binary files for all cases.
Catch errors when writing an index that contains invalid objects.
test-lib.sh: A command dying due to a signal is an unexpected failure.
git-update-index(1): fix use of quoting in section title
Also adds test cases for adding removing and deleting
binary and text files plus two tests for the checks on
binary files.
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If git-write-index is called without --missing-ok, it reports invalid
objects that it finds in the index. But without this patch it dies
right away or may run into an infinite loop.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When test_expect_failure detects that a command failed, it still has to
treat a program that crashed from a signal as unexpected failure.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When path-list-insert is called on an existing path, it returned an
unrelated element in the list. Luckily most of the callers are
ignoring the return value, but merge-recursive uses it at three places
and this would have resulted in a bogus rename detection.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The graft file can contain comment lines and read_graft_line can
return NULL for such an input, which should be skipped by the
reader.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
git-rebase: Use --ignore-if-in-upstream option when executing git-format-patch.
git-svn: fix dcommit losing changes when out-of-date from svn
git-svn: don't die on rebuild when --upgrade is specified
git-svn: avoid printing filenames of files we're not tracking
This reduces the number of conflicts when rebasing after a series of
patches to the same piece of code is committed upstream.
Signed-off-by: Robert Shearman <rob@codeweavers.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This moves the example to specify a line range with regexps to
a later part of the manual page that has similar examples.
Signed-off-by: Junio C Hamano <junkio@cox.net>
There was a bug in dcommit (and commit-diff) which caused deltas
to be generated against the latest version of the changed file
in a repository, and not the revision we are diffing (the tree)
against locally.
This bug can cause recent changes to the svn repository to be
silently clobbered by git-svn if our repository is out-of-date.
Thanks to Steven Grimm for noticing the bug.
The (few) people using the commit-diff command are now required
to use the -r/--revision argument. dcommit usage is unchanged.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
--copy-remote and --upgrade are rarely (never?) used together,
so if --copy-remote is specified, that means the user really
wanted to copy the remote ref, and we should fail if that fails.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is purely an aesthetic change, we already skip importing of
files that don't affect the subdirectory we import.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Currently the error e.g. when pushing to a read-only repository is quite
confusing, this attempts to clean it up, unifies error reporting between
various object writers and uses error() on couple more places.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The same change as the previous. It is rather sad that commit log
message parser gives list of chomped lines while tag message parser
gives unchomped ones.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This revealed that the output from blame and tag was not chomped
properly and was relying on HTML output not noticing that extra
whitespace that resulted from the newline, which was also fixed.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Just make it take over blame's place. Documentation and command
have all stopped mentioning "git-pickaxe". The built-in synonym
is left in the command table, so you can still say "git pickaxe",
but it probably is a good idea to retire it as well.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Otherwise, commit log template would get the remainder of the
filename start on a new line unquoted and the log gets messed
up.
I initially considered using the full quote_c_style(), but the
output from the command is primarily for human consumption so
chose to leave other control characters and bytes with high-bits
unmolested.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Replace "gitweb diff header" with its full sha1 of blobs and replace
it by "git diff" header and extended diff header. Change also somewhat
highlighting of diffs.
Added `file_type_long' subroutine to convert file mode in octal to
file type description (only for file modes which used by git).
Changes:
* "gitweb diff header" which looked for example like below:
file:_<sha1 before>_ -> file:_<sha1 after>_
where 'file' is file type and '<sha1>' is full sha1 of blob is
changed to
diff --git _a/<file before>_ _b/<file after>_
In both cases links are visible and use default link style. If file
is added, a/<file> is not hyperlinked. If file is deleted, b/<file>
is not hyperlinked.
* there is added "extended diff header", with <path> and <hash>
hyperlinked (and <hash> shortened to 7 characters), and <mode>
explained: '<mode>' is extended to '<mode> (<file type description>)',
where added text is slightly lighter to easy distinguish that it
was added (and it is difference from git-diff output).
* from-file/to-file two-line header lines have slightly darker color
than removed/added lines.
* chunk header has now delicate line above for easier finding chunk
boundary, and top margin of 2px, both barely visible.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Instead of simply hiding control characters in esc_path by replacing
them with '?', use Character Escape Codes (CEC) i.e. alphabetic
backslash sequences like those found in C programming language and
many other languages influenced by it, such as Java and Perl. If
control characted doesn't have corresponding character escape code,
use octal char sequence to escape it.
Alternatively, controls can be replaced with Unicode Control
Pictures U+2400 - U+243F (9216 - 9279), the Unicode characters
reserved for representing control characters when it is
necessary to print or display them.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Extend unquote subroutine, which unquotes quoted and escaped filenames
which git may return, to deal not only with octal char sequence
quoting, but also quoting ordinary characters including '\"' and '\\'
which are respectively quoted '"' and '\', and to deal also with
C escape sequences including '\t' for TAB and '\n' for LF.
Add esc_path subroutine for gitweb quoting and HTML escaping filenames
(currently it does equivalent of ls' --hide-control-chars, which means
showing undisplayable characters (including '\n' and '\t') as '?'
(question mark) character, and use 'span' element with cntrl CSS class
to help rendering them differently.
Convert gitweb to use esc_path correctly to print pathnames.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
A forked project is defined to be $projname/$forkname.git for
$projname.git; the code did not check this correctly and mistook
$projname/.git to be a fork of itself. This minimally fixes the
breakage.
Also forks were not checked when index.aux file was in use.
Listing the forked ones in index.aux would show them also on the
toplevel index which may go against the hierarchical nature of
forks, but again this is a minimal fix to whip it in a better
shape suitable to be in the 'master' branch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Apparently this code was never tested without "forks". check-feature
returns a one-element list (0) when disabled, and assigning that to a
scalar variable made it to be called in a scalar context, which meant
my $check_forks = gitweb_check_feature("forks") were always 1!
Signed-off-by: Junio C Hamano <junkio@cox.net>
With this,
git pickaxe -L '/--progress/,+20' v1.4.0 -- pack-objects.c
gives you 20 lines starting from the first occurrence of
'--progress' in pack-objects, digging from v1.4.0 version.
You can also say
git pickaxe -L '/--progress/,-5' v1.4.0 -- pack-objects.c
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds documentation for --progress and --all-progress, remove a
duplicate --progress handling and make usage string more readable.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In wt-status.c there is a test which does nothing.
This patch removes it.
Signed-off-by: Tero Roponen <teanropo@jyu.fi>
Signed-off-by: Junio C Hamano <junkio@cox.net>
