My stupidity deserved to be yelled at by Linus ... there is no reason
to require the working tree to be clean when merging -- the only
requirements are index to match HEAD commit and the paths involved in
merge are up to date in the working tree. Revert and cherry-pick are
just specialized forms of merge, and the requirements should be the
same.
Remove the 'general purpose routine to make sure tree is clean' from
git-sh-setup, to prevent me from getting tempted again.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Being able to try multiple strategies and automatically picking one
that seems to give less conflicting result may or may not much sense
in practice. At least that should not force normal use case to
additionally require the working tree to be fully clean. As Linus
shouted, local changes do not matter unless they interfere with the
merge.
This commit changes git-merge not to require a clean working tree.
Only when we will iterate through more than one merge strategies,
local changes are stashed away before trying the first merge, and
restored before second and later merges are attempted.
The index file must be in sync with HEAD in any case -- otherwise the
merge result would contain changes since HEAD that was done locally
and registered in the index. This check is already enforced by
three-way read-tree existing merge strategies use, but is done here as
a safeguard as well.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a careful version of the script stuff that currently just
blindly writes HEAD with a new value.
You can use
git-update-ref HEAD <newhead>
or
git-update-ref HEAD <newhead> <oldhead>
where the latter version verifies that the old value of HEAD matches
oldhead.
It basically allows a "ref" file to be a symbolic pointer to another ref
file by starting with the four-byte header sequence of "ref:".
More importantly, it allows the update of a ref file to follow these
symbolic pointers, whether they are symlinks or these "regular file
symbolic refs".
NOTE! It follows _real_ symlinks only if they start with "refs/":
otherwise it will just try to read them and update them as a regular file
(ie it will allow the filesystem to follow them, but will overwrite such a
symlink to somewhere else with a regular filename).
In general, using
git-update-ref HEAD "$head"
should be a _lot_ safer than doing
echo "$head" > "$GIT_DIR/HEAD"
both from a symlink following standpoint _and_ an error checking
standpoint. The "refs/" rule for symlinks means that symlinks that point
to "outside" the tree are safe: they'll be followed for reading but not
for writing (so we'll never write through a ref symlink to some other
tree, if you have copied a whole archive by creating a symlink tree).
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The merge strategies can give more descriptive error messages for
conflict cases if they are given the actual branch names instead of
the SHA1s.
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If the working tree is dirty read-tree will fail, and we don't want an
ugly stack trace in that case. Also make sure we don't print stack
traces when we use 'die'.
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When many paths are modified, rename detection takes a lot of time.
The new option -l<num> can be used to disable rename detection when
more than <num> paths are possibly created as renames.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a long overdue clean-up to the code for parsing and passing
diff options. It also tightens some constness issues.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now we conditionally compile things in compat/, so we should remove
object files there. Python execution can leave *.pyc and *.pyo, which
need to be cleaned as well.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Also cmd-renames.sh can now be used to remove the backward compatible
symlinks -- this is not used by default in any way.
As discussed on the list with Pasky, git-ssh-push and git-ssh-pull will
keep calling each other for a while longer.
Signed-off-by: Junio C Hamano <junkio@cox.net>
It was ignoring the generation number of the commit when naming 2nd
and later parents, showing "(linus^n)^2" for any <n> incorrectly as
"linus^2".
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix missing symbol explanations, a few incorrect cases, and add
two-way merge rules.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
People typically say 'grep -e $pattern' because $pattern has a leading
dash which would be mistaken as a grep flag. Make sure we pass -e in
front of $pattern when we invoke grep.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Even without the trouble it causes to people without GNU xargs,
it was not really necessary to print from Perl and then remove it
outside. Just unlink it inside Perl.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Pasky taught me how he does his versioning for ELinks. This will sort
after 0.99.7 and interim fixes 0.99.7a, and before 0.99.8.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Taking the make command line Peter Eriksen uses, give defaults
to SHELL_PATH, TAR, CURLDIR, NO_STRCASESTR, and INSTALL.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Support systems that do not install curl headers and libraries
in /usr/{include,lib}.
Signed-off-by: Patrick Mauritz <oxygene@studentenbude.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The syslog code logs with severity LOG_INFO in the loginfo() function, so make
things less confusing.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Well, this makes it even more clear that we need the packet reader and
friends to use the daemon logging code. :/ Therefore, we at least indicate
in the "Disconnect" log message if the child process exitted with an error
code or not.
Idea by Linus.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
PSF license explicitly states the files in Python distribution is
compatible with GPL, and upstream clarified the licensing terms by
shortening its file header. This version is a verbatim copy from
release24-maint branch form Python CVS.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The change I made to rsh.c would leave the string unterminated under
certain conditions, which unfortunately always applied! This patch
fixes this. For some reason this never bit on i386 or ppc, but bit me
on x86-64.
Fix situation where the buffer was not properly null-terminated.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If the source repository was packed, and git-local-fetch needed to
fetch a pack file, it spewed a misleading error message about not
being able to find the unpacked object. Fixed by adding the
warn_if_not_exists argument to copy_file(), which controls printing
of error messages in case the source file does not exist.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
"git-local-fetch -s" did not work with a packed repository, because
symlink() happily created a link to a non-existing object file,
therefore fetch_file() always returned success, and fetch_pack() was
not called. Fixed by calling stat() before symlink() to ensure the
file really exists.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
After open() failure, copy_file() called close(ifd) with ifd == -1
(harmless, but causes Valgrind noise). The same thing was possible
for the destination file descriptor.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
setup_indices() did not check the return value of opendir(), and
did not have a corresponding closedir() call.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The fetch code does not need object ref lists; by disabling them we
can save some time and memory.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Document the best way to show the change introduced by a
commit, based on the suggestion by Linus on the list.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When making changes to different files (i.e. dirty working tree) and
committing logically separate changes in groups, often it is necessary
to run 'git diff --cached HEAD' to make sure that the changes being
committed makes sense. Saying 'git diff --cached' by mistake gives
rather uninformative error message from git-diff-files complaining it
does not understand --cached flag.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The call to parse_object() in process() is not actually needed - if
the object type is unknown, parse_object() will be called by loop();
if the type is known, the object will be parsed by the appropriate
process_*() function.
After this change blobs which exist locally are no longer parsed,
which gives about 2x CPU usage improvement; the downside is that there
will be no warnings for existing corrupted blobs, but detecting such
corruption is the job of git-fsck-objects, not the fetch programs.
Newly fetched objects are still checked for corruption in http-fetch.c
and ssh-fetch.c (local-fetch.c does not seem to do it, but the removed
parse_object() call would not be reached for new objects anyway).
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Remove holes left after deleting flags, and use shifts to emphasize
that flags are single bits.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If the SEEN flag was not set, the TO_SCAN flag cannot be set,
therefore testing it is pointless.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It does not matter if we call prefetch() or set the TO_SCAN flag before
or after adding the object to process_queue. However, doing it before
object_list_insert() allows us to kill 3 lines of duplicated code.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The TO_FETCH flag also became redundant after adding the SEEN flag -
it was set and checked in process() to prevent adding the same object
to process_queue multiple times, but now SEEN guards against this.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
After adding the SEEN flag, the SCANNED flag became obviously
redundant - each object can get into process_queue through process()
only once, and therefore multiple calls to process_object() for the
same object are not possible.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The process() function is very often called multiple times for the
same object (because lots of trees refer to the same blobs), but did
not have a fast check for this, therefore a lot of useless calls to
has_sha1_file() and parse_object() were made before discovering that
nothing needs to be done.
This patch adds the SEEN flag which is used in process() to make it
look at each object only once. When testing git-local-fetch on the
repository of GIT, this gives a 14x improvement in CPU usage (mainly
because the redundant calls to parse_object() are now avoided -
parse_object() always unpacks and parses the object data, even if it
was already parsed before).
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In all places where process() is called except the one in pull() (which
is executed only once) the pointer to the object is already available,
so pass it as the argument to process() instead of sha1 and avoid an
unneeded call to lookup_object_type().
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When we check the optional objects/info/alternates file at the remote
repository, we forgot to really squelch error message from rsync.
Not having that file is not a crime.
Signed-off-by: Junio C Hamano <junkio@cox.net>
(cherry picked from 89d844d084 commit)
In the tutorial, there is a section entitled "Checking it out"
that shows how to use diff log and whatchanged to insect some
of the repository state.
As the phrase "checkout" ususally carries some baggage WRT
other revision control mechanism, I suggest that we re-title
this section something like "Inspecting Changes".
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
