This converts git_config_alias to the public alias_lookup
function. Because of the nature of our config parser, we
still have to rely on setting static data. However, that
interface is wrapped so that you can just say
value = alias_lookup(key);
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch converts cmd_help to use parseopt, along with a
few style cleanups, including:
- enum constants are now ALL_CAPS
- parse_help_format returns an enum value rather than
setting a global as a side effect
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is just a basic sanity check that --compose works at
all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, the fake.sendmail test harness would write its
output to a hardcoded file, allowing only a single message
to be tested. Instead, let's have it save the messages for
all of its invocations so that we can see which messages
were sent, and in which order.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This error message is very confusing---it doesn't tell the user
anything about how to fix the situation. And the actual fix
for the situation ("git bisect reset") does a checkout of a
potentially random branch, (compared to what the user wants to
be on for the bisect she is starting).
The simplest way to eliminate the confusion is to just make
"git bisect start" do the cleanup itself. There's no significant
loss of safety here since we already have a general safety in
the form of the reflog.
Note: We preserve the warning for any cogito users. We do this
by switching from .git/head-name to .git/BISECT_START for the
extra state, (which is a more descriptive name anyway).
Signed-off-by: Carl Worth <cworth@cworth.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do not account binary nor unmerged files when --shortstat is
asked for (or the summary stat at the end of --stat).
The new option --dirstat should work the same way as it is about
summarizing the changes of multiple files by adding them up.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/apply-whitespace:
ws_fix_copy(): move the whitespace fixing function to ws.c
apply: do not barf on patch with too large an offset
core.whitespace: cr-at-eol
git-apply --whitespace=fix: fix whitespace fuzz introduced by previous run
builtin-apply.c: pass ws_rule down to match_fragment()
builtin-apply.c: move copy_wsfix() function a bit higher.
builtin-apply.c: do not feed copy_wsfix() leading '+'
builtin-apply.c: simplify calling site to apply_line()
builtin-apply.c: clean-up apply_one_fragment()
builtin-apply.c: mark common context lines in lineinfo structure.
builtin-apply.c: optimize match_beginning/end processing a bit.
builtin-apply.c: make it more line oriented
builtin-apply.c: push match-beginning/end logic down
builtin-apply.c: restructure "offset" matching
builtin-apply.c: refactor small part that matches context
Most of the time when I am on a detached HEAD and I am not doing
a rebase or bisect operation the working directory is sitting on a
tagged release of the repository. Showing the tag name instead of
the commit SHA-1 is much more descriptive and a much better reminder
of the state of this working directory.
Now that git-describe --exact-match is available as a cheap means
of obtaining the exact annotated tag or nothing at all, we can
favor the annotated tag name over the abbreviated commit SHA-1.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes scripts want (or need) the annotated tag name that exactly
matches a specific commit, or no tag at all. In such cases it can be
difficult to determine if the output of `git describe $commit` is a
real tag name or a tag+abbreviated commit. A common idiom is to run
git-describe twice:
if test $(git describe $commit) = $(git describe --abbrev=0 $commit)
...
but this is a huge waste of time if the caller is just going to pick a
different method to describe $commit or abort because it is not exactly
an annotated tag.
Setting the maximum number of candidates to 0 allows the caller to ask
for only a tag that directly points at the supplied commit, or to have
git-describe abort if no such item exists.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we aren't going to use a ref there is no reason for us to open
its object from the object database. This avoids opening any of
the head commits reachable from refs/heads/ unless they are also
reachable through the commit we have been asked to describe and
we need to walk through it to find a tag.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By using the peeled ref information inside of the packed-refs file we
can avoid opening tag objects to obtain the commits they reference.
This speeds up git-describe when there are a large number of tags
in the repository as we have less objects to parse before we can
start commit matching.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently the only caller of peel_ref is show-ref, which is using
this function to show the peeled tag information if it is available
from an existing packed-refs file. The call happens during the
for_each_ref callback function, so we have the proper struct ref_list
already on the call stack but it is not easily available to return
the peeled information to the caller.
We now save the current struct ref_list item before calling back
into the callback function so that future calls to peel_ref from
within the callback function can quickly access the current ref.
Doing so will save us an lstat() per ref processed as we no longer
have to check the filesystem to see if the ref exists as a loose
file or is packed. This current ref caching also saves a linear
scan of the cached packed refs list.
As a micro-optimization we test the address of the passed ref name
against the current_ref->name before we go into the much more costly
strcmp(). Nearly any caller of peel_ref will be passing us the same
string do_for_each_ref passed them, which is current_ref->name.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So I find it irritating when git thinks for a long time without telling me
what's taking so long. And by "long time" I definitely mean less than two
seconds, which is already way too long for me.
This hits me when doing a large pull and the checkout takes a long time,
or when just switching to another branch that is old and again checkout
takes a while.
Now, git read-tree already had support for the "-v" flag that does nice
updates about what's going on, but it was delayed by two seconds, and if
the thing had already done more than half by then it would be quiet even
after that, so in practice it meant that we migth be quiet for up to four
seconds. Much too long.
So this patch changes the timeout to just one second, which makes it much
more palatable to me.
The other thing this patch does is that "git checkout" now doesn't disable
the "-v" flag when doing its thing, and only disables the output when
given the -q flag. When allowing "checkout -m" to fall back to a 3-way
merge, the users will see the error message from straight "checkout",
so we will tell them that we do fall back to make them look less scary.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the SHA-1 we are requesting the object for does not exist in
the object database we get a NULL back. Accessing the type from
that is not likely to succeed on any system.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Cygwin we have to use git-archive.exe as the target, otherwise
running 'make dist' does not compile git-archive in the current
directory. That may cause 'make dist' to fail on a clean source
tree that has never been built before.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even when -m is given to allow fallilng back to 3-way merge
while switching branches, we should refuse if the original index
is unmerged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
t4014 test used GNU extension 'Q' in its sed scripts, but the
uses can safely be replaced with 'q'. Among other platforms,
sed on Mac OS X 10.4 does not accept the former.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use int(<expr>/2) to get integer value for a substring length.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Packing objects can be done in parallell nowadays, but it's
only done if the config option pack.threads is set to a value
above 1. Because of that, the code-path used is often not the
most optimal one.
This patch adds a routine to detect the number of online CPU's
at runtime (online_cpus()). When pack.threads (or --threads=) is
given a value of 0, the number of threads is set to the number of
online CPU's. This feature is also documented.
As per Nicolas Pitre's recommendations, the default is still to
run pack-objects single-threaded unless explicitly activated,
either by configuration or by command line parameter.
The routine online_cpus() is a rework of "numcpus.c", written by
one Philip Willoughby <pgw99@doc.ic.ac.uk>. numcpus.c is in the
public domain and can presently be downloaded from
http://csgsoft.doc.ic.ac.uk/numcpus/
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Callers of start_command() can set the members .in and .out of struct
child_process to a value > 0 to specify that this descriptor is used as
the stdin or stdout of the child process.
Previously, if start_command() was successful, this descriptor was closed
upon return. Here we now make sure that the descriptor is also closed in
case of failures. All callers are updated not to close the file descriptor
themselves after start_command() was called.
Note that earlier run_gpg_verify() of git-verify-tag set .out = 1, which
worked because start_command() treated this as a special case, but now
this is incorrect because it closes the descriptor. The intent here is to
inherit stdout to the child, which is achieved by .out = 0.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By setting .in, .out, or .err members of struct child_process to -1, the
callers of start_command() can request that a pipe is allocated that talks
to the child process and one end is returned by replacing -1 with the
file descriptor.
Previously, a flag was set (for .in and .out, but not .err) to signal
finish_command() to close the pipe end that start_command() had handed out,
so it was optional for callers to close the pipe, and many already do so.
Now we make it mandatory to close the pipe.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'maint' of git://repo.or.cz/git-gui:
git-gui: Focus insertion point at end of strings in repository chooser
git-gui: Avoid hardcoded Windows paths in Cygwin package files
git-gui: Default TCL_PATH to same location as TCLTK_PATH
git-gui: Paper bag fix error dialogs opening over the main window
git-gui: Ensure error dialogs always appear over all other windows
git-gui: relax "dirty" version detection
git-gui: support Git Gui.app under OS X 10.5
An earlier commit e1b3a2c (Build-in merge-recursive) made the
subtree merge strategy backend unavailable. This resurrects
it.
A new test t6029 currently only tests the strategy is available,
but it should be enhanced to check the real "subtree" case.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When expiring reflog entries, a new temporary log is written which contains
only the entries to retain. After it is written, it is renamed to replace
the existing reflog. Currently, we check that writing of the new log is
successful and print a message on failure, but the original reflog is still
replaced with the new reflog even on failure. This patch causes the
original reflog to be retained if we fail when writing the new reflog.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase supports --strategy, so pull should pass the option along to it.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to just memcpy() the index entry when we copied the stat() and
SHA1 hash information, which worked well enough back when the index
entry was just an exact bit-for-bit representation of the information on
disk.
However, these days we actually have various management information in
the cache entry too, and we should be careful to not overwrite it when
we copy the stat information from another index entry.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes the name hash removal function (which really just sets the
bit that disables lookups of it) available to external routines, and
makes read_cache_unmerged() use it when it drops an unmerged entry from
the index.
It's renamed to remove_index_entry(), and we drop the (unused) 'istate'
argument.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We handled the case of removing and re-inserting cache entries badly,
which is something that merging commonly needs to do (removing the
different stages, and then re-inserting one of them as the merged
state).
We even had a rather ugly special case for this failure case, where
replace_index_entry() basically turned itself into a no-op if the new
and the old entries were the same, exactly because the hash routines
didn't handle it on their own.
So what this patch does is to not just have the UNHASHED bit, but a
HASHED bit too, and when you insert an entry into the name hash, that
involves:
- clear the UNHASHED bit, because now it's valid again for lookup
(which is really all that UNHASHED meant)
- if we're being lazy, we're done here (but we still want to clear the
UNHASHED bit regardless of lazy mode, since we can become unlazy
later, and so we need the UNHASHED bit to always be set correctly,
even if we never actually insert the entry into the hash list)
- if it was already hashed, we just leave it on the list
- otherwise mark it HASHED and insert it into the list
this all means that unhashing and rehashing a name all just works
automatically. Obviously, you cannot change the name of an entry (that
would be a serious bug), but nothing can validly do that anyway (you'd
have to allocate a new struct cache_entry anyway since the name length
could change), so that's not a new limitation.
The code actually gets simpler in many ways, although the lazy hashing
does mean that there are a few odd cases (ie something can be marked
unhashed even though it was never on the hash in the first place, and
isn't actually marked hashed!).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change removes all obvious useless if-before-free tests.
E.g., it replaces code like this:
if (some_expression)
free (some_expression);
with the now-equivalent:
free (some_expression);
It is equivalent not just because POSIX has required free(NULL)
to work for a long time, but simply because it has worked for
so long that no reasonable porting target fails the test.
Here's some evidence from nearly 1.5 years ago:
http://www.winehq.org/pipermail/wine-patches/2006-October/031544.html
FYI, the change below was prepared by running the following:
git ls-files -z | xargs -0 \
perl -0x3b -pi -e \
's/\bif\s*\(\s*(\S+?)(?:\s*!=\s*NULL)?\s*\)\s+(free\s*\(\s*\1\s*\))/$2/s'
Note however, that it doesn't handle brace-enclosed blocks like
"if (x) { free (x); }". But that's ok, since there were none like
that in git sources.
Beware: if you do use the above snippet, note that it can
produce syntactically invalid C code. That happens when the
affected "if"-statement has a matching "else".
E.g., it would transform this
if (x)
free (x);
else
foo ();
into this:
free (x);
else
foo ();
There were none of those here, either.
If you're interested in automating detection of the useless
tests, you might like the useless-if-before-free script in gnulib:
[it *does* detect brace-enclosed free statements, and has a --name=S
option to make it detect free-like functions with different names]
http://git.sv.gnu.org/gitweb/?p=gnulib.git;a=blob;f=build-aux/useless-if-before-free
Addendum:
Remove one more (in imap-send.c), spotted by Jean-Luc Herren <jlh@gmx.ch>.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We were returning the _address of_ the stored item (or NULL)
instead of the item itself. While this sort of indirection
is useful for insertion (since you can lookup and then
modify), it is unnecessary for read-only lookup. Since the
hash code splits these functions between the internal
lookup_hash_entry function and the public lookup_hash
function, it makes sense for the latter to provide what
users of the library expect.
The result of this was that the index caching returned bogus
results on lookup. We unfortunately didn't catch this
because we were returning a "struct cache_entry **" as a
"void *", and accidentally assigning it to a "struct
cache_entry *".
As it happens, this actually _worked_ most of the time,
because the entries were defined as:
struct cache_entry {
struct cache_entry *next;
...
};
meaning that interpreting a "struct cache_entry **" as a
"struct cache_entry *" would yield an entry where all fields
were totally bogus _except_ for the next pointer, which
pointed to the actual cache entry. When walking the list, we
would look at the bogus "name" field, which was unlikely to
match our lookup, and then proceed to the "real" entry.
The reading of bogus data was silently ignored most of the
time, but could cause a segfault for some data (which seems
to be more common on OS X).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When searching commit messages (commit search), if matched string is
too long, the generated HTML was munged leading to an ill-formed XHTML
document.
Now gitweb chop leading, trailing and matched parts, HTML escapes
those parts, then composes and marks up match info. HTML output is
never chopped. Limiting matched info to 80 columns (with slop) is now
done by dividing remaining characters after chopping match equally to
leading and trailing part, not by chopping composed and HTML marked
output.
Noticed-by: Jean-Baptiste Quenot <jbq@caraldi.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git hash-object used to process the --stdin command line argument
before reading subsequent arguments. This caused 'git hash-object
--stdin -w' to fail to actually write the object into the
database, while '-w --stdin' properly did. Now git hash-object
first reads all arguments, and then processes them.
This regresses one insane use case. git hash-object used to allow
multiple --stdin arguments on the command line:
$ git hash-object --stdin --stdin
foo
^D
bar
^D
Now git hash-object errors out if --stdin is given more than once.
Reported by Josh Triplett through
http://bugs.debian.org/464432
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After changing builtin-tag.c to use strbuf in fd17f5b (Replace all
read_fd use with strbuf_read, and get rid of it.), the last condition
in do_sign() will always be false, as it's checked already right
above. So let's remove the cruft.
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The options following <merge-program> are not -a, --, or <file>...,
but either -a, or -- <file>..., while -- is optional.
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-gui: Focus insertion point at end of strings in repository chooser
git-gui: Avoid hardcoded Windows paths in Cygwin package files
git-gui: Default TCL_PATH to same location as TCLTK_PATH
git-gui: Paper bag fix error dialogs opening over the main window
When selecting a local working directory for a new repository or a
location to clone an existing repository into we now set the insert
point at the end of the selected path, allowing the user to type in
any additional parts of the path if they so desire.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When we are being built by the Cygwin package maintainers we need to
embed the POSIX path to our library files and not the Windows path.
Embedding the Windows path means all end-users who install our Cygwin
package would be required to install Cygwin at the same Windows path
as the package maintainer had Cygwin installed to. This requirement
is simply not user-friendly and may be infeasible for a large number
of our users.
We now try to auto-detect if the Tcl/Tk binary we will use at runtime
is capable of translating POSIX paths into Windows paths the same way
that cygpath does the translations. If the Tcl/Tk binary gives us the
same results then it understands the Cygwin path translation process
and should be able to read our library files from a POSIX path name.
If it does not give us the same answer as cygpath then the Tcl/Tk
binary might actually be a native Win32 build (one that is not
linked against Cygwin) and thus requires the native Windows path
to our library files. We can assume this is not a Cygwin package
as the Cygwin maintainers do not currently ship a pure Win32 build
of Tcl/Tk.
Reported on the git mailing list by Jurko Gospodnetić.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Most users set TCLTK_PATH to tell git-gui where to find wish, but they
fail to set TCL_PATH to the same Tcl installation. We use the non-GUI
tclsh during builds so headless systems are still able to create an
index file and create message files without GNU msgfmt. So it matters
to us that we find a working TCL_PATH at build time.
If TCL_PATH hasn't been set yet we can take a better guess about what
tclsh executable to use by replacing 'wish' in the executable path with
'tclsh'. We only do this replacement on the filename part of the path,
just in case the string "wish" appears in the directory paths. Most of
the time the tclsh will be installed alongside wish so this replacement
is a sensible and safe default.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the main window is the only toplevel we have open then we
don't have a valid grab right now, so we need to assume the
best toplevel to use for the parent is ".".
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Fix a regression introduced by
1ca3d6e (send-email: squelch warning due to comparing undefined $_ to "")
where if the user was prompted for an initial In-Reply-To and didn't
provide one, messages would be sent out with an invalid In-Reply-To of
"<>"
Also add test cases for the regression and the fix. A small modification
was needed to allow send-email to take its replies from stdin if the
environment variable GIT_SEND_EMAIL_NOTTY is set.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ask branch_get() for the new branch explicitly instead of
letting it return a potentially stale information.
Tighten the logic to find the tracking branch to deal better
with misconfigured repositories (i.e. branch.*.merge can exist
but it may not have a refspec that fetches to .it)
Also fixes grammar in a message, as pointed out by Jeff King.
The function is about reporting and not automatically
fast-forwarding to the upstream, so stop calling it
"adjust-to".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
