"GIT_DIR=some.where git --bare cmd" and worse yet
"git --git-dir=some.where --bare cmd" were very confusing. They
both ignored git-dir specified, and instead made $cwd as GIT_DIR.
This changes --bare not to override existing GIT_DIR.
This has been like this for a long time. Let's hope nobody sane
relied on this insane behaviour.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To keep the change small, this is done by setting GIT_PAGER to "cat".
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The GIT_SSH environment variable has survived for quite a while
without being documented, but has been mentioned on list and on
my day-job repositories can only be accessed via magic supplied
through the wonderous hack that is GIT_SSH.
Advertising it alongside other "low level magic" such as GIT_PAGER
and GIT_MERGE_VERBOSITY will certainly help others who need to
spread their own pixie dust to make things work.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add "Configuration" section to describe merge.summary
configuration variable (which is mentioned in git-fmt-merge-msg(1)
man page, but it is a plumbing command), and merge.verbosity
configuration variable (so there is a place to make reference
from "Environment Variables" section of git(7) man page) to the
git-merge(1) man page. Also describe GIT_MERGE_VERBOSITY
environment.
The configuration variable merge.verbosity and environment variable
GIT_MERGE_VERBOSITY were introduced in commit 8c3275ab, which also
documented configuration variable but not environment variable.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ei/worktree+filter:
filter-branch: always export GIT_DIR if it is set
setup_git_directory: fix segfault if repository is found in cwd
test GIT_WORK_TREE
extend rev-parse test for --is-inside-work-tree
Use new semantics of is_bare/inside_git_dir/inside_work_tree
introduce GIT_WORK_TREE to specify the work tree
test git rev-parse
rev-parse: introduce --is-bare-repository
rev-parse: document --is-inside-git-dir
This patch arose from a discussion started by Jim Meyering's patch
whose intention was to provide better diagnostics for failed writes.
Linus proposed a better way to do things, which also had the added
benefit that adding a fflush() to git-log-* operations and incremental
git-blame operations could improve interactive respose time feel, at
the cost of making things a bit slower when we aren't piping the
output to a downstream program.
This patch skips the fflush() calls when stdout is a regular file, or
if the environment variable GIT_FLUSH is set to "0". This latter can
speed up a command such as:
GIT_FLUSH=0 strace -c -f -e write time git-rev-list HEAD | wc -l
a tiny amount.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
setup_gdg is used as abbreviation for setup_git_directory_gently.
The work tree can be specified using the environment variable
GIT_WORK_TREE and the config option core.worktree (the environment
variable has precendence over the config option). Additionally
there is a command line option --work-tree which sets the
environment variable.
setup_gdg does the following now:
GIT_DIR unspecified
repository in .git directory
parent directory of the .git directory is used as work tree,
GIT_WORK_TREE is ignored
GIT_DIR unspecified
repository in cwd
GIT_DIR is set to cwd
see the cases with GIT_DIR specified what happens next and
also see the note below
GIT_DIR specified
GIT_WORK_TREE/core.worktree unspecified
cwd is used as work tree
GIT_DIR specified
GIT_WORK_TREE/core.worktree specified
the specified work tree is used
Note on the case where GIT_DIR is unspecified and repository is in cwd:
GIT_WORK_TREE is used but is_inside_git_dir is always true.
I did it this way because setup_gdg might be called multiple
times (e.g. when doing alias expansion) and in successive calls
setup_gdg should do the same thing every time.
Meaning of is_bare/is_inside_work_tree/is_inside_git_dir:
(1) is_bare_repository
A repository is bare if core.bare is true or core.bare is
unspecified and the name suggests it is bare (directory not
named .git). The bare option disables a few protective
checks which are useful with a working tree. Currently
this changes if a repository is bare:
updates of HEAD are allowed
git gc packs the refs
the reflog is disabled by default
(2) is_inside_work_tree
True if the cwd is inside the associated working tree (if there
is one), false otherwise.
(3) is_inside_git_dir
True if the cwd is inside the git directory, false otherwise.
Before this patch is_inside_git_dir was always true for bare
repositories.
When setup_gdg finds a repository git_config(git_default_config) is
always called. This ensure that is_bare_repository makes use of
core.bare and does not guess even though core.bare is specified.
inside_work_tree and inside_git_dir are set if setup_gdg finds a
repository. The is_inside_work_tree and is_inside_git_dir functions
will die if they are called before a successful call to setup_gdg.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Documentation: don't reference non-existent 'git-cvsapplycommit'
user-manual: stop deprecating the manual
user-manual: miscellaneous editing
user-manual: fix .gitconfig editing examples
user-manual: clean up fast-forward and dangling-objects sections
user-manual: add section ID's
user-manual: more discussion of detached heads, fix typos
git-gui: Allow spaces in path to 'wish'
gitk: Allow user to choose whether to see the diff, old file, or new file
It's just as much a work-in-progress, but at least now it's gotten
enough technical review to shake out most of the really bad lies, so
hopefully it doesn't do any actual damage. And if we encourage people
to read it, they'll be more likely to whine about it, which will help
get it fixed faster.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Some other programs get the user's email address from $EMAIL, so fall back to
that if we don't have a Git-specific email address.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
http.c: Fix problem with repeated calls of http_init
Add missing reference to GIT_COMMITTER_DATE in git-commit-tree documentation
Fix import-tars fix.
Update .mailmap with "Michael"
Do not barf on too long action description
Catch empty pathnames in trees during fsck
Don't allow empty pathnames in fast-import
import-tars: be nice to wrong directory modes
git-svn: Added 'find-rev' command
git shortlog documentation: add long options and fix a typo
* 'master-for-junio' of git://repo.or.cz/git/fastimport:
fast-import: Fail if a non-existant commit is used for merge
fast-import: Avoid infinite loop after reset
* maint:
Fix diff-options references in git-diff and git-format-patch
Add definition of <commit-ish> to the main git man page.
Begin SubmittingPatches with a check list
fast-import: Fail if a non-existant commit is used for merge
fast-import: Avoid infinite loop after reset
Update the main git.html page to point at 1.5.0.3 documentation.
Update draft 1.5.1 release notes with what we have so far.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This also adds a hook in the Makefile I can use to automatically
include pointers to documentation for older releases when updating
the pages at http://kernel.org/pub/software/scm/git/docs/.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds two new classes (pure-helpers and "Interacting with
Others") to the command list in the main manual page. The
latter class is primarily about foreign SCM interface and is
placed before low-level (plumbing) commands.
Also it promotes a handful commands to mainporcelain category
while demoting some others.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Current README content is way too esoteric for someone looking at GIT
for the first time. Instead it should provide a quick summary of what
GIT is with a few pointers to other resources.
The bulk of the previous README content is moved to
Documentation/core-intro.txt.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
While 'init-db' still is and probably will always remain a valid git
command for obvious backward compatibility reasons, it would be a good
idea to move shipped tools and docs to using 'init' instead.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Make "init" the equivalent of "init-db". This should make first GIT
impression a little more friendly.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio asked for a 'git gc' utility which users can execute on a
regular basis to perform basic repository actions such as:
* pack-refs --prune
* reflog expire
* repack -a -d
* prune
* rerere gc
So here is a command which does exactly that. The parameters fed
to reflog's expire subcommand can be chosen by the user by setting
configuration options in .git/config (or ~/.gitconfig), as users may
want different expiration windows for each repository but shouldn't
be bothered to remember what they are all of the time.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Most of this is derived from the documentation of RCS merge.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Git no longer calls an external diff program to generate patches.
Remove the documentation which suggests that you can pass
arbitrary diff options via the GIT_DIFF_OPTS environment variable.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I copied most of the text from git-status.txt.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Just make it take over blame's place. Documentation and command
have all stopped mentioning "git-pickaxe". The built-in synonym
is left in the command table, so you can still say "git pickaxe",
but it probably is a good idea to retire it as well.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes the documentation less confusing to newcomers.
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Two asterisks the SYNOPSIS section were mistaken as emphasis,
and the latter backtick in "`<key>`s" were not recognized as
closing backtick.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The brief list given in "Symbolic Identifiers" section of the
main documentation is good enough for overview, but help the
reader to find a more comrehensive list as needed.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Currently it does what git-blame does, but only faster.
More importantly, its internal structure is designed to support
content movement (aka cut-and-paste) more easily by allowing
more than one paths to be taken from the same commit.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch documents zip backend options.
It also adds git-archive command into the main git manual
page.
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The command now issues a big deprecation warning message and runs
git-archive command with appropriate arguments.
git-tar-tree $tree_ish $base always forces $base to be the leading
directory name, so the --prefix parameter passed internally to
git-archive is a slash appended to it, i.e. "--prefix=$base/".
Signed-off-by: Junio C Hamano <junkio@cox.net>
With this, you can say
git --bare repack -a -d
inside a bare repository, and it will actually work. While at it,
also move the --version, --help and --exec-path options to the
handle_options() function.
While at documenting the new options, also document the --paginate
option.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* ml/trace:
test-lib: unset GIT_TRACE
GIT_TRACE: fix a mixed declarations and code warning
GIT_TRACE: show which built-in/external commands are executed
With the environment variable GIT_TRACE set git will show
- alias expansion
- built-in command execution
- external command execution
on stderr.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The program is not used by git-clone since git-fetch-pack was extended
to allow its caller do what git-clone-pack alone did, and git-clone was
updated to use it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch ports and modifies appropriately the git aliases documentation
from my patch, shall it rest in peace.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I'm afraid I'll be accused of trying to suck all the jokes and the
personality out of the git documentation. I'm not! Really!
That said, "man git" is one of the first things a new user is likely try,
and it seems a little cruel to start off with a somewhat obscure joke
about the architecture of git.
So instead I'm trying for a relatively straightforward description of what
git does, and what features distinguish it from other systems, together
with immediate links to introductory documentation.
I also did some minor reorganization in an attempt to clarify the
classification of commands. And revised a bit for conciseness (as is
obvious from the diffstat--hopefully I didn't cut anything important).
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Clarify update and post-update hooks.
Made a few references to the hooks documentation.
Signed-off-by: Jon Loeliger <jdl@jdl.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In a workflow that employs relatively long lived topic branches,
the developer sometimes needs to resolve the same conflict over
and over again until the topic branches are done (either merged
to the "release" branch, or sent out and accepted upstream).
This commit introduces a new command, "git rerere", to help this
process by recording the conflicted automerge results and
corresponding hand-resolve results on the initial manual merge,
and later by noticing the same conflicted automerge and applying
the previously recorded hand resolution using three-way merge.
Signed-off-by: Junio C Hamano <junkio@cox.net>
asciidoc 7.0.4 and newer considers such includes from parent directory
unsafe.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We forgot to update the primary link from git.html leading to
the tutorial, and also forgot to build and install the renamed
core-tutorial document.
Signed-off-by: Junio C Hamano <junkio@cox.net>
We still advertise "git resolve" as a standalone command, but never
"git octopus", so nobody should be using it and it is safe to
retire it. The functionality is still available as a strategy
backend.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The initial section of tutorial was too heavy on internal
workings for the first-time readers, so rewrite the introductory
section of git(7) to start with "not learning core git commands"
section and refer them to README to grasp the basic concepts,
then Everyday to give overview with task/role oriented examples
for minimum set of commands, and finally the tutorial.
Also add to existing note in the tutorial that many too
technical descriptions can be skipped by a casual reader.
I initially started to review the tutorial, with the objective
of ripping out the detailed technical information altogether,
but I found that the level of details in the initial couple of
sections that talk about refs and the object database in a
hands-on fashion was about rigth, and left all of them there. I
feel that reading about fsck-index and repack is too abstract
without being aware of these directories and files.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Finish each sentence with a full stop.
Instead of saying 'directory index' 'directory cache' etc,
consistently say 'index'.
Signed-off-by: Junio C Hamano <junkio@cox.net>
It's by design a bit stupid (matching ^git rather than ^git-), so as
to work with 'gitk' and 'git' as well.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The program 'git' now has --exec-path which needs explaining.
Renamed old "DESCRIPTION" to "CORE GIT COMMANDS" to make room for
"OPTIONS" while following follow some sort of convention.
Also updated AUTHORS section to pat my own back a bit.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Because we use "lost-found" as the directory name to hold
dangling object names, it is confusing to call the command
git-lost+found, although it makes sense and is even cute ;-).
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch makes the documentation refer to the index
as index instead of cache, but some references still
remain. (e.g. git-update-index.txt)
Signed-off-by: Lukas Sandström <lukass@etek.chalmers.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
For a 1.0 release, there is no need to maintain the
historical "Previously this command was known as..."
information on the doc splash page. It is noise;
command names should stand on their own now.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
According to my checks, these were the only commands not yet linked.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-index-pack builds a pack index file for an existing packed
archive. With this utility a packed archive which was transferred
without the corresponding pack index can be added to objects/pack/
without repacking.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The textual diff generation with built-in '-p' in diff-* brothers has
proven to be useful enough that git-diff-helper outlived its usefulness.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some old scripts might still use git-rev-tree, but it really is
clearly inferior in every way to git-rev-list that such scripts should
be fixed anyway. Fixing them should be pretty easy.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-export was done as a concept example on how easy it is to export
the git data to something else. It's much less powerful than any
number of trivial one-liner scripts now, and real exporters would not
ever use git-export.
It's obviously much less powerful than "git-whatchanged", or just
about any combination of git-rev-list + git-diff-tree.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The replacement was performed automatically by these commands:
perl -pi -e 's/link:(git.+)\.html\[\1\]/gitlink:$1\[1\]/g' \
README Documentation/*.txt
perl -pi -e 's/link:git\.html\[git\]/gitlink:git\[7\]/g' \
README Documentation/*.txt
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
As promised, this is the "big tool rename" patch. The primary differences
since 0.99.6 are:
(1) git-*-script are no more. The commands installed do not
have any such suffix so users do not have to remember if
something is implemented as a shell script or not.
(2) Many command names with 'cache' in them are renamed with
'index' if that is what they mean.
There are backward compatibility symblic links so that you and
Porcelains can keep using the old names, but the backward
compatibility support is expected to be removed in the near
future.
Signed-off-by: Junio C Hamano <junkio@cox.net>
parse-remote and rev-parse gets full documentation. Add skeleton for
archimport. Link them from the main git(7) page. Also move git-daemon
and git-request-pull out of 'undocumented' section.
Signed-off-by: Junio C Hamano <junkio@cox.net>
... and add a copyright notice.
[jc: also move its entry in git.txt from undocumented section.]
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Mostly making the formatted html prettier.
Signed-off-by: Junio C Hamano <junkio@cox.net>
(cherry picked from 7adf1f15ebe074d4767df941817a6cf86d8e2533 commit)
Now the rebase is rewritten to use git cherry-pick, there is no user
for that ancient script. I've checked Cogito and StGIT to make sure
they do not use it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Gitzilla updated bunch of undocumented command pages, so move the
entries in the main documentation index around to put them in proper
category. Ordering within category will be fixed later.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The text does not say anything interesting, but at least the
author list should reflect something close to reality.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When showing only one branch a lot of default output becomes redundant,
so clean it up a bit, and document what is shown. Retire the earlier
implementation "git-show-branches-script".
Signed-off-by: Junio C Hamano <junkio@cox.net>
There are many programs like git-add not described at all, and the
organization of the list of commands may be suboptimal, but we have to
start somewhere.
Signed-off-by: Junio C Hamano <junkio@cox.net>
[jc: the patch forgot to update the main git.txt documentation,
making all these new documentation practically no-op, so I added
a minimum attempt linking them from there.]
Signed-off-by: Ryan Anderson <ryan@michonline.com>
Often I find myself wanting to do quick branches check when I am
not in the windowing environment and cannot run gitk.
This stupid script shows commits leading to the heads of
interesting branches with indication which ones belong to which
branches, so that fork point is somewhat discernible without
using gitk.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Linus brought up that documentation for many commands have
incorrect attribution. I started counting lines again, but
ended up adding a handful of missing manual pages.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The king penguin said:
It has no point any more, all the tools check the file
status on their own, and yes, the thing should probably be
removed.
and the faithful servant makes it so.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add documentation for the git-peek-remote and link it from the
main index.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Describe short-hand for remote repository used in fetch/pull.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Sharing code between shell scripts and C is a challenge. The program
git-var allows us to have a set of named values that a shell script can
interrogate and a normal C program can simply call the functions that
compute them. Allowing sharing when computing plain test values.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This splits push-pull related commands into a separate
category. I think a bigger overhaul of the main index is
needed, but have not got around to it. Help is welcome.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
While adding the documentation for these two commands, I noticed
that the name of the program on the other end (git-upload-pack)
is already almost configurable but git-clone-pack lacked command
line parameter parsing to actually use anything but default, so
I introduced --exec= like other remote commands while I was at it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch makes the first half of write_sha1_file() and
index_fd() externally visible, to allow callers to compute the
object ID without actually storing it in the object database.
[JC demangled the whitespaces himself because he liked the patch
so much, and reworked the interface to index_fd() slightly,
taking suggestion from Linus and of his own.]
Signed-off-by: Bryan Larsen <bryan.larsen@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Given a list of <pack>.idx files, this command validates the
index file and the corresponding .pack file for consistency.
This patch also uses the same validation mechanism in fsck-cache
when the --full flag is used.
During normal operation, sha1_file.c verifies that a given .idx
file matches the .pack file by comparing the SHA1 checksum
stored in .idx file and .pack file as a minimum sanity check.
We may further want to check the pack signature and version when
we map the pack, but that would be a separate patch.
Earlier, errors to map a pack file was not flagged fatal but led
to a random fatal error later. This version explicitly die()s
when such an error is detected.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Packed delta files created by git-pack-objects seems to be the
way to go, and existing "delta" object handling code has exposed
the object representation details to too many places. Remove it
while we refactor code to come up with a proper interface in
sha1_file.c.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
In preparation for 1.0 release, this makes the command names
consistent with others in git-*-pull family.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This moves the git manpage to man7, since "git" isn't a direct command
per se. It also does two other things:
* Sort of works around the asciidoc 6.0.3 bug where the manpages all
get called "git.1". It just renames them to what they should have
been called.
* Fixes a cut-n-paste bug in git-diff-helper.txt that was making
asciidoc choke.
It used to be that diff-tree needed helper support to parse its
raw output to generate diffs, but these days git-diff-* family
produces the same output and the helper is not tied to diff-tree
anymore. Drop "tree" from its name.
This commit is done separately to record just the rename and no
file content changes. The changes in the renamed files are recorded
in the next commit.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Bundled with the changes in the unrenamed files.
Signed-off-by: Petr Baudis <pasky@ucw.cz>
