Commit 722ff7f87 (receive-pack: quarantine objects until
pre-receive accepts, 2016-10-03) regressed pushes to
repositories with colon (or semi-colon in Windows in them)
because it adds the repository's main object directory to
GIT_ALTERNATE_OBJECT_DIRECTORIES. The receiver interprets
the colon as a delimiter, not as part of the path, and
index-pack is unable to find objects which it needs to
resolve deltas.
The previous commit introduced a quoting mechanism for the
alternates list; let's use it here to cover this case. We'll
avoid quoting when we can, though. This alternate setup is
also used when calling hooks, so it's possible that the user
may call older git implementations which don't understand
the quoting mechanism. By quoting only when necessary, this
setup will continue to work unless the user _also_ has a
repository whose path contains the delimiter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We read lists of alternates from objects/info/alternates
files (delimited by newline), as well as from the
GIT_ALTERNATE_OBJECT_DIRECTORIES environment variable
(delimited by colon or semi-colon, depending on the
platform).
There's no mechanism for quoting the delimiters, so it's
impossible to specify an alternate path that contains a
colon in the environment, or one that contains a newline in
a file. We've lived with that restriction for ages because
both alternates and filenames with colons are relatively
rare, and it's only a problem when the two meet. But since
722ff7f87 (receive-pack: quarantine objects until
pre-receive accepts, 2016-10-03), which builds on the
alternates system, every push causes the receiver to set
GIT_ALTERNATE_OBJECT_DIRECTORIES internally.
It would be convenient to have some way to quote the
delimiter so that we can represent arbitrary paths.
The simplest thing would be an escape character before a
quoted delimiter (e.g., "\:" as a literal colon). But that
creates a backwards compatibility problem: any path which
uses that escape character is now broken, and we've just
shifted the problem. We could choose an unlikely escape
character (e.g., something from the non-printable ASCII
range), but that's awkward to use.
Instead, let's treat names as unquoted unless they begin
with a double-quote, in which case they are interpreted via
our usual C-stylke quoting rules. This also breaks
backwards-compatibility, but in a smaller way: it only
matters if your file has a double-quote as the very _first_
character in the path (whereas an escape character is a
problem anywhere in the path). It's also consistent with
many other parts of git, which accept either a bare pathname
or a double-quoted one, and the sender can choose to quote
or not as required.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In contrast to "git am --abort", a sequencer abort did not check
whether the current HEAD is the one that is expected. This can lead
to loss of work (when not spotted and resolved using reflog before
the garbage collector chimes in).
This behavior is now changed by mimicking "git am --abort". The
abortion is done but HEAD is not changed when the current HEAD is
not the expected HEAD.
A new file "sequencer/abort-safety" is added to save the expected
HEAD.
The new behavior is only active when --abort is invoked on multiple
picks. The problem does not occur for the single-pick case because
it is handled differently.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two different places where the --no-abbrev option is parsed,
and two different places where SHA-1s are abbreviated. We normally parse
--no-abbrev with setup_revisions(), but in the no-index case, "git diff"
calls diff_opt_parse() directly, and diff_opt_parse() didn't handle
--no-abbrev until now. (It did handle --abbrev, however.) We normally
abbreviate SHA-1s with find_unique_abbrev(), but commit 4f03666 ("diff:
handle sha1 abbreviations outside of repository, 2016-10-20) recently
introduced a special case when you run "git diff" outside of a
repository.
setup_revisions() does also call diff_opt_parse(), but not for --abbrev
or --no-abbrev, which it handles itself. setup_revisions() sets
rev_info->abbrev, and later copies that to diff_options->abbrev. It
handles --no-abbrev by setting abbrev to zero. (This change doesn't
touch that.)
Setting abbrev to zero was broken in the outside-of-a-repository special
case, which until now resulted in a truly zero-length SHA-1, rather than
taking zero to mean do not abbreviate. The only way to trigger this bug,
however, was by running "git diff --raw" without either the --abbrev or
--no-abbrev options, because 1) without --raw it doesn't respect abbrev
(which is bizarre, but has been that way forever), 2) we silently clamp
--abbrev=0 to MINIMUM_ABBREV, and 3) --no-abbrev wasn't handled until
now.
The outside-of-a-repository case is one of three no-index cases. The
other two are when one of the files you're comparing is outside of the
repository you're in, and the --no-index option.
Signed-off-by: Jack Bates <jack@nottheoilrig.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
9ec26e7977 (difftool: fix argument handling in subdirs, 2016-07-18)
corrected how path arguments are handled in a subdirectory, but
it introduced a regression in how entries outside of the
subdirectory are handled by dir-diff.
When preparing the right-side of the diff we only include the
changed paths in the temporary area.
The left side of the diff is constructed from a temporary
index that is built from the same set of changed files, but it
was being constructed from within the subdirectory. This is a
problem because the indexed paths are toplevel-relative, and
thus they were not getting added to the index.
Teach difftool to chdir to the toplevel of the repository before
preparing its temporary indexes. This ensures that all of the
toplevel-relative paths are valid.
Add test cases to more thoroughly exercise this scenario.
Reported-by: Frank Becker <fb@mooflu.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When creating a stash, we need to look at the diff between
the working tree and HEAD, and do so using the git-diff
porcelain. Because git-diff enables porcelain config like
renames by default, this causes at least one problem. The
--name-only format will not mention the source side of a
rename, meaning we will fail to stash a deletion that is
part of a rename.
We could fix that case by passing --no-renames, but this is
a symptom of a larger problem. We should be using the
diff-index plumbing here, which does not have renames
enabled by default, and also does not respect any
potentially confusing config options.
Reported-by: Matthew Patey <matthew.patey2167@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit made HTTP redirects more obvious and
tightened up the default behavior. However, there's another
way for a server to ask a git client to fetch arbitrary
content: by having an http-alternates file (or a regular
alternates file, which is used as a backup).
Similar to the HTTP redirect case, a malicious server can
claim to have refs pointing at object X, return a 404 when
the client asks for X, but point to some other URL via
http-alternates, which the client will transparently fetch.
The end result is that it looks from the user's perspective
like the objects came from the malicious server, as the
other URL is not mentioned at all.
Worse, because we feed the new URL to curl ourselves, the
usual protocol restrictions do not kick in (neither curl's
default of disallowing file://, nor the protocol
whitelisting in f4113cac0 (http: limit redirection to
protocol-whitelist, 2015-09-22).
Let's apply the same rules here as we do for HTTP redirects.
Namely:
- unless http.followRedirects is set to "always", we will
not follow remote redirects from http-alternates (or
alternates) at all
- set CURLOPT_PROTOCOLS alongside CURLOPT_REDIR_PROTOCOLS
restrict ourselves to a known-safe set and respect any
user-provided whitelist.
- mention alternate object stores on stderr so that the
user is aware another source of objects may be involved
The first item may prove to be too restrictive. The most
common use of alternates is to point to another path on the
same server. While it's possible for a single-server
redirect to be an attack, it takes a fairly obscure setup
(victim and evil repository on the same host, host speaks
dumb http, and evil repository has access to edit its own
http-alternates file).
So we could make the checks more specific, and only cover
cross-server redirects. But that means parsing the URLs
ourselves, rather than letting curl handle them. This patch
goes for the simpler approach. Given that they are only used
with dumb http, http-alternates are probably pretty rare.
And there's an escape hatch: the user can allow redirects on
a specific server by setting http.<url>.followRedirects to
"always".
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We instruct curl to always follow HTTP redirects. This is
convenient, but it creates opportunities for malicious
servers to create confusing situations. For instance,
imagine Alice is a git user with access to a private
repository on Bob's server. Mallory runs her own server and
wants to access objects from Bob's repository.
Mallory may try a few tricks that involve asking Alice to
clone from her, build on top, and then push the result:
1. Mallory may simply redirect all fetch requests to Bob's
server. Git will transparently follow those redirects
and fetch Bob's history, which Alice may believe she
got from Mallory. The subsequent push seems like it is
just feeding Mallory back her own objects, but is
actually leaking Bob's objects. There is nothing in
git's output to indicate that Bob's repository was
involved at all.
The downside (for Mallory) of this attack is that Alice
will have received Bob's entire repository, and is
likely to notice that when building on top of it.
2. If Mallory happens to know the sha1 of some object X in
Bob's repository, she can instead build her own history
that references that object. She then runs a dumb http
server, and Alice's client will fetch each object
individually. When it asks for X, Mallory redirects her
to Bob's server. The end result is that Alice obtains
objects from Bob, but they may be buried deep in
history. Alice is less likely to notice.
Both of these attacks are fairly hard to pull off. There's a
social component in getting Mallory to convince Alice to
work with her. Alice may be prompted for credentials in
accessing Bob's repository (but not always, if she is using
a credential helper that caches). Attack (1) requires a
certain amount of obliviousness on Alice's part while making
a new commit. Attack (2) requires that Mallory knows a sha1
in Bob's repository, that Bob's server supports dumb http,
and that the object in question is loose on Bob's server.
But we can probably make things a bit more obvious without
any loss of functionality. This patch does two things to
that end.
First, when we encounter a whole-repo redirect during the
initial ref discovery, we now inform the user on stderr,
making attack (1) much more obvious.
Second, the decision to follow redirects is now
configurable. The truly paranoid can set the new
http.followRedirects to false to avoid any redirection
entirely. But for a more practical default, we will disallow
redirects only after the initial ref discovery. This is
enough to thwart attacks similar to (2), while still
allowing the common use of redirects at the repository
level. Since c93c92f30 (http: update base URLs when we see
redirects, 2013-09-28) we re-root all further requests from
the redirect destination, which should generally mean that
no further redirection is necessary.
As an escape hatch, in case there really is a server that
needs to redirect individual requests, the user can set
http.followRedirects to "true" (and this can be done on a
per-server basis via http.*.followRedirects config).
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a malicious server redirects the initial ref
advertisement, it may be able to leak sha1s from other,
unrelated servers that the client has access to. For
example, imagine that Alice is a git user, she has access to
a private repository on a server hosted by Bob, and Mallory
runs a malicious server and wants to find out about Bob's
private repository.
Mallory asks Alice to clone an unrelated repository from her
over HTTP. When Alice's client contacts Mallory's server for
the initial ref advertisement, the server issues an HTTP
redirect for Bob's server. Alice contacts Bob's server and
gets the ref advertisement for the private repository. If
there is anything to fetch, she then follows up by asking
the server for one or more sha1 objects. But who is the
server?
If it is still Mallory's server, then Alice will leak the
existence of those sha1s to her.
Since commit c93c92f30 (http: update base URLs when we see
redirects, 2013-09-28), the client usually rewrites the base
URL such that all further requests will go to Bob's server.
But this is done by textually matching the URL. If we were
originally looking for "http://mallory/repo.git/info/refs",
and we got pointed at "http://bob/other.git/info/refs", then
we know that the right root is "http://bob/other.git".
If the redirect appears to change more than just the root,
we punt and continue to use the original server. E.g.,
imagine the redirect adds a URL component that Bob's server
will ignore, like "http://bob/other.git/info/refs?dummy=1".
We can solve this by aborting in this case rather than
silently continuing to use Mallory's server. In addition to
protecting from sha1 leakage, it's arguably safer and more
sane to refuse a confusing redirect like that in general.
For example, part of the motivation in c93c92f30 is
avoiding accidentally sending credentials over clear http,
just to get a response that says "try again over https". So
even in a non-malicious case, we'd prefer to err on the side
of caution.
The downside is that it's possible this will break a
legitimate but complicated server-side redirection scheme.
The setup given in the newly added test does work, but it's
convoluted enough that we don't need to care about it. A
more plausible case would be a server which redirects a
request for "info/refs?service=git-upload-pack" to just
"info/refs" (because it does not do smart HTTP, and for some
reason really dislikes query parameters). Right now we
would transparently downgrade to dumb-http, but with this
patch, we'd complain (and the user would have to set
GIT_SMART_HTTP=0 to fetch).
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A pathname value in a clean/smudge filter process "key=value" pair can
contain the '=' character (introduced in edcc858). Make the user aware
of this issue in the docs, add a corresponding test case, and fix the
issue in filter process value parser of the example implementation in
contrib.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove superfluous .gitignore pattern and invalid '.' in `git commit`
calls.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If git-p4 tried to store an empty file in GitLFS then it crashed while
parsing the pointer file:
oid = re.search(r'^oid \w+:(\w+)', pointerFile, re.MULTILINE).group(1)
AttributeError: 'NoneType' object has no attribute 'group'
This happens because GitLFS does not create a pointer file for an empty
file. Teach git-p4 this behavior to fix the problem and add a test case.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--only is implied when paths are present, and required
them unless --amend. But with --allow-empty it should
be allowed as well - it is the only way to create an
empty commit in the presence of staged changes.
Signed-off-by: Andreas Krey <a.krey@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the next line the `actual` is overwritten again, so no need to redirect
the output of checkout into that file.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Noticed-by: David Turner <dturner@twosigma.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: David Turner <dturner@twosigma.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git pull --rebase" always runs "git rebase" after fetching the
commit to serve as the new base, even when the new base is a
descendant of the current HEAD, i.e. we haven't done any work.
In such a case, we can instead fast-forward to the new base without
invoking the rebase process.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update to the test framework made in 2.9 timeframe broke running
the tests under valgrind, which has been fixed.
* nd/test-helpers:
valgrind: support test helpers
Fix for a racy false-positive test failure.
* as/merge-attr-sleep:
t6026: clarify the point of "kill $(cat sleep.pid)"
t6026: ensure that long-running script really is
Revert "t6026-merge-attr: don't fail if sleep exits early"
Revert "t6026-merge-attr: ensure that the merge driver was called"
t6026-merge-attr: ensure that the merge driver was called
t6026-merge-attr: don't fail if sleep exits early
"git send-email" attempts to pick up valid e-mails from the
trailers, but people in real world write non-addresses there, like
"Cc: Stable <add@re.ss> # 4.8+", which broke the output depending
on the availability and vintage of Mail::Address perl module.
* mm/send-email-cc-cruft-after-address:
Git.pm: add comment pointing to t9000
t9000-addresses: update expected results after fix
parse_mailboxes: accept extra text after <...> address
The lazy prereq for MKTEMP uses "mktemp -t" to see if
mergetool's internal mktemp call will be able to run. But
unlike the call inside mergetool, we do not ever bother to
clean up the result, and the /tmp of git developers will
slowly fill up with "foo.XXXXXX" directories as they run the
test suite over and over. Let's clean up the directory
after we've verified its creation.
Note that we don't use test_when_finished here, and instead
just make rmdir part of the &&-chain. We should only remove
something that we're confident we just created. A failure in
the middle of the chain either means there's nothing to
clean up, or we are very confused and should err on the side
of caution.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It makes it easier to write tests for. But it should also be good for
the user since locating a worktree by eye would be easier once they
notice this.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is required by git-worktree.txt, stating that the main worktree is
the first line (especially in --porcelain mode when we can't just change
behavior at will).
There's only one case when get_worktrees() may skip main worktree, when
parse_ref() fails. Update the code so that we keep first item as main
worktree and return something sensible in this case:
- In user-friendly mode, since we're not constraint by anything,
returning "(error)" should do the job (we already show "(detached
HEAD)" which is not machine-friendly). Actually errors should be
printed on stderr by parse_ref() (*)
- In plumbing mode, we do not show neither 'bare', 'detached' or
'branch ...', which is possible by the format description if I read
it right.
Careful readers may realize that when the local variable "head_ref" in
get_main_worktree() is emptied, add_head_info() will do nothing to
wt->head_sha1. But that's ok because head_sha1 is zero-ized in the
previous patch.
(*) Well, it does not. But it's supposed to be a stop gap implementation
until we can reuse refs code to parse "ref: " stuff in HEAD, from
resolve_refs_unsafe(). Now may be the time since refs refactoring is
mostly done.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
1335d76e45 ("merge: avoid "safer crlf" during recording of merge
results", 2016-07-08) tried to split make_cache_entry() call made
with CE_MATCH_REFRESH into a call to make_cache_entry() without one,
followed by a call to add_cache_entry(), refresh_cache() and another
add_cache_entry() as needed. However the conversion was botched in
that it forgot that refresh_cache() can return NULL, which was
handled correctly in make_cache_entry() but in the updated code.
This fixes https://github.com/git-for-windows/git/issues/952
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In https://github.com/git-for-windows/git/issues/952, a complicated
scenario was described that leads to a segmentation fault in
cherry-pick.
It boils down to a certain code path involving a renamed file that is
dirty, for which `refresh_cache_entry()` returns `NULL`, and that
`NULL` not being handled properly.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git archive" and "git mailinfo" stopped reading from local
configuration file with a recent update.
* jc/setup-cleanup-fix:
archive: read local configuration
mailinfo: read local configuration
"git rebase -i" did not work well with core.commentchar
configuration variable for two reasons, both of which have been
fixed.
* js/rebase-i-commentchar-fix:
rebase -i: handle core.commentChar=auto
stripspace: respect repository config
rebase -i: highlight problems with core.commentchar
Using a %(HEAD) placeholder in "for-each-ref --format=" option
caused the command to segfault when on an unborn branch.
* jc/for-each-ref-head-segfault-fix:
for-each-ref: do not segv with %(HEAD) on an unborn branch
Teach push to respect the --dry-run option when configured to
recursively push submodules 'on-demand'. This is done by passing the
--dry-run flag to the child process which performs a push for a
submodules when performing a dry-run.
In order to preserve good user experience, the additional check for
unpushed submodules is skipped during a dry-run when
--recurse-submodules=on-demand. The check is skipped because the submodule
pushes were performed as dry-runs and this check would always fail as the
submodules would still need to be pushed.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds a test to illustrate how push run with --dry-run doesn't
actually perform a dry-run when push is configured to push submodules
on-demand. Instead all submodules which need to be pushed are actually
pushed to their remotes while any updates for the superproject are
performed as a dry-run. This is a bug and not the intended behaviour of
a dry-run.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since b9605bc4f2 ("config: only read .git/config from configured
repos", 2016-09-12), we do not read from ".git/config" unless we
know we are in a repository. "git archive" however didn't do the
repository discovery and instead relied on the old behaviour.
Teach the command to run a "gentle" version of repository discovery
so that local configuration variables are honoured.
[jc: stole tests from peff]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since b9605bc4f2 ("config: only read .git/config from configured
repos", 2016-09-12), we do not read from ".git/config" unless we
know we are in a repository. "git mailinfo" however didn't do the
repository discovery and instead relied on the old behaviour. This
was mostly OK because it was merely run as a helper program by other
porcelain scripts that first chdir's up to the root of the working
tree.
Teach the command to run a "gentle" version of repository discovery
so that local configuration variables like mailinfo.scissors are
honoured.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 84c9dc2 (commit: allow core.commentChar=auto for character auto
selection, 2014-05-17) extended the core.commentChar functionality to
allow for the value 'auto', it forgot that rebase -i was already taught to
handle core.commentChar, and in turn forgot to let rebase -i handle that
new value gracefully.
Reported by Taufiq Hoven.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The way "git stripspace" reads the configuration was not quite
kosher, in that the code forgot to probe for a possibly existing
repository (note: stripspace is designed to be usable outside the
repository as well). It read .git/config only when it was run from
the top-level of the working tree by accident. A recent change
b9605bc4f2 ("config: only read .git/config from configured repos",
2016-09-12) stopped reading the repository-local configuration file
".git/config" unless the repository discovery process is done, so
that .git/config is never read even when run from the top-level,
exposing the old bug more.
When rebasing interactively with a commentChar defined in the
current repository's config, the help text at the bottom of the edit
script potentially used an incorrect comment character. This was not
only funny-looking, but also resulted in tons of warnings like this
one:
Warning: the command isn't recognized in the following line
- #
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The interactive rebase does not currently play well with
core.commentchar. Let's add some tests to highlight those problems
that will be fixed in the remainder of the series.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to flip between "*" and " " prefixes depending on what
branch is checked out used in --format='%(HEAD)' did not consider
that HEAD may resolve to an unborn branch and dereferenced a NULL.
This will become a lot easier to trigger as the codepath will be
used to reimplement "git branch [--list]" in the future.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It seems a little silly to do a reachabilty check in the case where we
trust the user to access absolutely everything in the repository.
Also, it's racy in a distributed system -- perhaps one server
advertises a ref, but another has since had a force-push to that ref,
and perhaps the two HTTP requests end up directed to these different
servers.
Signed-off-by: David Turner <dturner@twosigma.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the event that a HTTP server closes the connection after giving a
200 but before giving any packets, we don't want to hang forever
waiting for a response that will never come. Instead, we should die
immediately.
One case where this happens is when attempting to fetch a dangling
object by its object name. In this case, the server dies before
sending any data. Prior to this patch, fetch-pack would wait for
data from the server, and remote-curl would wait for fetch-pack,
causing a deadlock.
Despite this patch, there is other possible malformed input that could
cause the same deadlock (e.g. a half-finished pktline, or a pktline but
no trailing flush). There are a few possible solutions to this:
1. Allowing remote-curl to tell fetch-pack about the EOF (so that
fetch-pack could know that no more data is coming until it says
something else). This is tricky because an out-of-band signal would
be required, or the http response would have to be re-framed inside
another layer of pkt-line or something.
2. Make remote-curl understand some of the protocol. It turns out
that in addition to understanding pkt-line, it would need to watch for
ack/nak. This is somewhat fragile, as information about the protocol
would end up in two places. Also, pkt-lines which are already at the
length limit would need special handling.
Both of these solutions would require a fair amount of work, whereas
this hack is easy and solves at least some of the problem.
Still to do: it would be good to give a better error message
than "fatal: The remote end hung up unexpectedly".
Signed-off-by: David Turner <dturner@twosigma.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a submodule is being merged or cherry-picked into a working
tree that already contains a corresponding empty directory, do not
record a conflict.
One situation where this bug appears is:
- Commit 1 adds a submodule
- Commit 2 removes that submodule and re-adds it into a subdirectory
(sub1 to sub1/sub1).
- Commit 3 adds an unrelated file.
Now the user checks out commit 1 (first deinitializing the submodule),
and attempts to cherry-pick commit 3. Previously, this would fail,
because the incoming submodule sub1/sub1 would falsely conflict with
the empty sub1 directory.
This patch ignores the empty sub1 directory, fixing the bug. We only
ignore the empty directory if the object being emplaced is a
submodule, which expects an empty directory.
Signed-off-by: David Turner <dturner@twosigma.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The try_parent_shorthands() function shows each parent via
show_rev(). We pass the correct parent sha1, but our "name"
parameter still points at the original refname. So asking
for a regular rev-parse works fine (it prints the sha1s),
but asking for the symbolic name gives nonsense like:
$ git rev-parse --symbolic HEAD^-1
HEAD
^HEAD
which is always an empty set of commits. Asking for "^!" is
likewise broken, with the added bonus that its prints ^HEAD
for _each_ parent. And "^@" just prints HEAD repeatedly.
Arguably it would be correct to just pass NULL as the name
here, and always get the parent expressed as a sha1. The
"--symbolic" documentaton claims only "as close to the
original input as possible", and we certainly fallback to
sha1s where necessary. But it's pretty easy to generate a
symbolic name on the fly from the original.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are three codepaths that use a variable whose name is
pack_compression_level to affect how objects and deltas sent to a
packfile is compressed. Unlike zlib_compression_level that controls
the loose object compression, however, this variable was static to
each of these codepaths. Two of them read the pack.compression
configuration variable, using core.compression as the default, and
one of them also allowed overriding it from the command line.
The other codepath in bulk-checkin did not pay any attention to the
configuration.
Unify the configuration parsing to git_default_config(), where we
implement the parsing of core.loosecompression and core.compression
and make the former override the latter, by moving code to parse
pack.compression and also allow core.compression to give default to
this variable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Last minute fixes to two fixups merged to 'master' recently.
* js/pwd-var-vs-pwd-cmd-fix:
t0021, t5615: use $PWD instead of $(pwd) in PATH-like shell variables
Fix for a racy false-positive test failure.
* as/merge-attr-sleep:
t6026: clarify the point of "kill $(cat sleep.pid)"
t6026: ensure that long-running script really is
Revert "t6026-merge-attr: don't fail if sleep exits early"
Revert "t6026-merge-attr: ensure that the merge driver was called"
t6026-merge-attr: ensure that the merge driver was called
t6026-merge-attr: don't fail if sleep exits early
The redirection of the standard error stream to a temporary file is
a leftover cruft during debugging. Remove it.
Besides, it is reported by folks on the Windows that the test is
flaky with this redirection; somebody gets confused and this
merely-redirected-to file gets marked as delete-pending by git.exe
and makes it finish with a non-zero exit status when "git checkout"
finishes. Windows folks may want to figure that one out, but for
the purpose of this test, it shouldn't become a show-stopper.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We lengthened the time the leftover process sleeps in the previous
commit to make sure it will be there while 'git merge' runs and
finishes. It therefore needs to be killed before leaving the test.
And it needs to be killed even when 'git merge' fails, so it has to
be triggered via test_when_finished mechanism.
Explain all that in a large comment, and move the use site of
test_when_finished to immediately before 'git merge' invocation,
where the process is spawned.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have to use $PWD instead of $(pwd) because on Windows the latter
would add a C: style path to bash's Unix-style $PATH variable, which
becomes confused by the colon after the drive letter. ($PWD is a
Unix-style path.)
In the case of GIT_ALTERNATE_OBJECT_DIRECTORIES, bash on Windows
assembles a Unix-style path list with the colon as separators. It
converts the value to a Windows-style path list with the semicolon as
path separator when it forwards the variable to git.exe. The same
confusion happens when bash's original value is contaminated with
Windows style paths.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When making sure that background tasks are cleaned up in 5babb5b
(t6026-merge-attr: clean up background process at end of test case,
2016-09-07), we considered to let the background task sleep longer, just
to be certain that it will still be running when we want to kill it
after the test.
Sadly, the assumption appears not to hold true that the test case passes
quickly enough to kill the background task within a second.
Simply increase it to an hour. No system can be possibly slow enough to
make above-mentioned assumption incorrect.
Reported by Andreas Schwab.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 734fde2d71.
The point of the test is that the stray process was still running
when 'git merge' did its thing through its completion, so a failure
to "kill" it means we didn't give a condition to the test to trigger
a possible future breakage. Appending "|| :" to the "kill" is
sweeping a test-bug under the rug.
Fix a corner-case regression in a topic that graduated during the
v2.11 cycle.
* jk/alt-odb-cleanup:
alternates: re-allow relative paths from environment
Test portability improvements and cleanups for t0021.
* jk/filter-process-fix:
t0021: fix filehandle usage on older perl
t0021: use $PERL_PATH for rot13-filter.pl
t0021: put $TEST_ROOT in $PATH
t0021: use write_script to create rot13 shell script
Test portability improvements and optimization for an
already-graduated topic.
* ls/filter-process:
t0021: compute file size with a single process instead of a pipeline
t0021: expect more variations in the output of uniq -c
Explicitly check for the existence of the pid file to test that the
merge driver was actually called.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 5babb5bdb3 ("t6026-merge-attr: clean up background process at end
of test case") added a kill command to clean up after the test, but this
can fail if the sleep command exits before the cleanup is executed.
Ignore the error from the kill command.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Jeff King <peff@peff.net>
Commit 670c359da (link_alt_odb_entry: handle normalize_path
errors, 2016-10-03) regressed the handling of relative paths
in the GIT_ALTERNATE_OBJECT_DIRECTORIES variable. It's not
entirely clear this was ever meant to work, but it _has_
worked for several years, so this commit restores the
original behavior.
When we get a path in GIT_ALTERNATE_OBJECT_DIRECTORIES, we
add it the path to the list of alternate object directories
as if it were found in objects/info/alternates, but with one
difference: we do not provide the link_alt_odb_entry()
function with a base for relative paths. That function
doesn't turn it into an absolute path, and we end up feeding
the relative path to the strbuf_normalize_path() function.
Most relative paths break out of the top-level directory
(e.g., "../foo.git/objects"), and thus normalizing fails.
Prior to 670c359da, we simply ignored the error, and due to
the way normalize_path_copy() was implemented it happened to
return the original path in this case. We then accessed the
alternate objects using this relative path.
By storing the relative path in the alt_odb list, the path
is relative to wherever we happen to be at the time we do an
object lookup. That means we look from $GIT_DIR in a bare
repository, and from the top of the worktree in a non-bare
repository.
If this were being designed from scratch, it would make
sense to pick a stable location (probably $GIT_DIR, or even
the object directory) and use that as the relative base,
turning the result into an absolute path. However, given
the history, at this point the minimal fix is to match the
pre-670c359da behavior.
We can do this simply by ignoring the error when we have no
relative base and using the original value (which we now
reliably have, thanks to strbuf_normalize_path()).
That still leaves us with a relative path that foils our
duplicate detection, and may act strangely if we ever
chdir() later in the process. We could solve that by storing
an absolute path based on getcwd(). That may be a good
future direction; for now we'll do just the minimum to fix
the regression.
The new t5615 script demonstrates the fix in its final three
tests. Since we didn't have any tests of the alternates
environment variable at all, it also adds some tests of
absolute paths.
Reported-by: Bryan Turner <bturner@atlassian.com>
Signed-off-by: Jeff King <peff@peff.net>
Avoid unwanted coding patterns (prodigal use of pipelines), and in
particular a useless use of cat.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jeff King <peff@peff.net>
Some versions of uniq -c write the count left-justified, other version
write it right-justified. Be prepared for both kinds.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jeff King <peff@peff.net>
The rot13-filter.pl script calls methods on implicitly
defined filehandles (STDOUT, and the result of an open()
call). Prior to perl 5.13, these methods are not
automatically loaded, and perl will complain with:
Can't locate object method "flush" via package "IO::Handle"
Let's explicitly load IO::File (which inherits from
IO::Handle). That's more than we need for just "flush", but
matches what perl has done since:
http://perl5.git.perl.org/perl.git/commit/15e6cdd91beb4cefae4b65e855d68cf64766965d
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rot13-filter.pl script hardcodes "#!/usr/bin/perl", and
does not respect $PERL_PATH at all. That is a problem if the
system does not have perl at that path, or if it has a perl
that is too old to run a complicated script like the
rot13-filter (but PERL_PATH points to a more modern one).
We can fix this by using write_script() to create a new copy
of the script with the correct #!-line. In theory we could
move the whole script inside t0021-conversion.sh rather than
having it as an auxiliary file, but it's long enough that
it just makes things harder to read.
As a bonus, we can stop using the full path to the script in
the filter-process config we add (because the trash
directory is in our PATH). Not only is this shorter, but it
sidesteps any shell-quoting issues. The original was broken
when $TEST_DIRECTORY contained a space, because it was
interpolated in the outer script.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We create a rot13.sh script in the trash directory, but need
to call it by its full path when we have moved our cwd to
another directory. Let's just put $TEST_ROOT in our $PATH so
that the script is always found.
This is a minor convenience for rot13.sh, but will be a
major one when we switch rot13-filter.pl to a script in the
same directory, as it means we will not have to deal with
shell quoting inside the filter-process config.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This avoids us fooling around with $SHELL_PATH and the
executable bit ourselves.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update to the test framework made in 2.9 timeframe broke running
the tests under valgrind, which has been fixed.
* nd/test-helpers:
valgrind: support test helpers
The user always has to say "stash@{$N}" when naming a single
element in the default location of the stash, i.e. reflogs in
refs/stash. The "git stash" command learned to accept "git stash
apply 4" as a short-hand for "git stash apply stash@{4}".
* aw/numbered-stash:
stash: allow stashes to be referenced by index only
Update "interpret-trailers" machinery and teaches it that people in
real world write all sorts of crufts in the "trailer" that was
originally designed to have the neat-o "Mail-Header: like thing"
and nothing else.
* jt/trailer-with-cruft:
trailer: support values folded to multiple lines
trailer: forbid leading whitespace in trailers
trailer: allow non-trailers in trailer block
trailer: clarify failure modes in parse_trailer
trailer: make args have their own struct
trailer: streamline trailer item create and add
trailer: use list.h for doubly-linked list
trailer: improve const correctness
The smudge/clean filter API expect an external process is spawned
to filter the contents for each path that has a filter defined. A
new type of "process" filter API has been added to allow the first
request to run the filter for a path to spawn a single process, and
all filtering need is served by this single process for multiple
paths, reducing the process creation overhead.
* ls/filter-process:
contrib/long-running-filter: add long running filter example
convert: add filter.<driver>.process option
convert: prepare filter.<driver>.process option
convert: make apply_filter() adhere to standard Git error handling
pkt-line: add functions to read/write flush terminated packet streams
pkt-line: add packet_write_gently()
pkt-line: add packet_flush_gently()
pkt-line: add packet_write_fmt_gently()
pkt-line: extract set_packet_header()
pkt-line: rename packet_write() to packet_write_fmt()
run-command: add clean_on_exit_handler
run-command: move check_pipe() from write_or_die to run_command
convert: modernize tests
convert: quote filter names in error messages
The Travis CI configuration we ship ran the tests with --verbose
option but this risks non-TAP output that happens to be "ok" to be
misinterpreted as TAP signalling a test that passed. This resulted
in unnecessary failure. This has been corrected by introducing a
new mode to run our tests in the test harness to send the verbose
output separately to the log file.
* jk/tap-verbose-fix:
test-lib: bail out when "-v" used under "prove"
travis: use --verbose-log test option
test-lib: add --verbose-log option
test-lib: handle TEST_OUTPUT_DIRECTORY with spaces
A hot-fix for a test added by a recent topic that went to both
'master' and 'maint' already.
* tg/add-chmod+x-fix:
t3700: fix broken test under !SANITY
When fetching from a remote that has many tags that are irrelevant
to branches we are following, we used to waste way too many cycles
when checking if the object pointed at by a tag (that we are not
going to fetch!) exists in our repository too carefully.
* jk/fetch-quick-tag-following:
fetch: use "quick" has_sha1_file for tag following
"git rebase" immediately after "git clone" failed to find the fork
point from the upstream.
* jk/merge-base-fork-point-without-reflog:
merge-base: handle --fork-point without reflog
In a worktree connected to a repository elsewhere, created via "git
worktree", "git checkout" attempts to protect users from confusion
by refusing to check out a branch that is already checked out in
another worktree. However, this also prevented checking out a
branch, which is designated as the primary branch of a bare
reopsitory, in a worktree that is connected to the bare
repository. The check has been corrected to allow it.
* dk/worktree-dup-checkout-with-bare-is-ok:
worktree: allow the main brach of a bare repository to be checked out
A stray symbolic link in $GIT_DIR/refs/ directory could make name
resolution loop forever, which has been corrected.
* jk/ref-symlink-loop:
files_read_raw_ref: prevent infinite retry loops in general
files_read_raw_ref: avoid infinite loop on broken symlinks
Tests run with --valgrind call git commands through a wrapper script
that invokes valgrind on them. This script (valgrind.sh) is in turn
invoked through symlinks created for each command in t/valgrind/bin/.
Since e6e7530d (test helpers: move test-* to t/helper/ subdirectory)
these symlinks have been broken for test helpers -- they point to the
old locations in the root of the build directory. Fix that by teaching
the code for creating the links about the new location of the binaries,
and do the same in the wrapper script to allow it to find its payload.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When new paths were added by "git add -N" to the index, it was
enough to circumvent the check by "git commit" to refrain from
making an empty commit without "--allow-empty". The same logic
prevented "git status" to show such a path as "new file" in the
"Changes not staged for commit" section.
* nd/ita-empty-commit:
commit: don't be fooled by ita entries when creating initial commit
commit: fix empty commit creation when there's no changes but ita entries
diff: add --ita-[in]visible-in-index
diff-lib: allow ita entries treated as "not yet exist in index"
Update of the sequencer codebase to make it reusable to reimplement
"rebase -i" continues.
* js/prepare-sequencer: (27 commits)
sequencer: mark all error messages for translation
sequencer: start error messages consistently with lower case
sequencer: quote filenames in error messages
sequencer: mark action_name() for translation
sequencer: remove overzealous assumption in rebase -i mode
sequencer: teach write_message() to append an optional LF
sequencer: refactor write_message() to take a pointer/length
sequencer: roll back lock file if write_message() failed
sequencer: stop releasing the strbuf in write_message()
sequencer: left-trim lines read from the script
sequencer: support cleaning up commit messages
sequencer: support amending commits
sequencer: allow editing the commit message on a case-by-case basis
sequencer: introduce a helper to read files written by scripts
sequencer: prepare for rebase -i's commit functionality
sequencer: remember the onelines when parsing the todo file
sequencer: get rid of the subcommand field
sequencer: avoid completely different messages for different actions
sequencer: strip CR from the todo script
sequencer: completely revamp the "todo" script parsing
...
A minor regression fix for "git submodule".
* sb/submodule-ignore-trailing-slash:
t0060: sidestep surprising path mangling results on Windows
submodule: ignore trailing slash in relative url
submodule: ignore trailing slash on superproject URL
These test helper programs access the index, but do not ever
setup_git_directory(), meaning we just blindly looked in
".git/index". This happened to work for the purposes of our
tests (which do not run from subdirectories, nor in
non-repos), but it's a bad habit.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An empty string used as a pathspec element has always meant
'everything matches', but it is too easy to write a script that
finds a path to remove in $path and run 'git rm "$paht"', which
ends up removing everything. Start warning about this use of an
empty string used for 'everything matches' and ask users to use a
more explicit '.' for that instead.
The hope is that existing users will not mind this change, and
eventually the warning can be turned into a hard error, upgrading
the deprecation into removal of this (mis)feature.
* ex/deprecate-empty-pathspec-as-match-all:
pathspec: warn on empty strings as pathspec
The Travis CI configuration we ship ran the tests with --verbose
option but this risks non-TAP output that happens to be "ok" to be
misinterpreted as TAP signalling a test that passed. This resulted
in unnecessary failure. This has been corrected by introducing a
new mode to run our tests in the test harness to send the verbose
output separately to the log file.
* jk/tap-verbose-fix:
test-lib: bail out when "-v" used under "prove"
travis: use --verbose-log test option
test-lib: add --verbose-log option
test-lib: handle TEST_OUTPUT_DIRECTORY with spaces
"git send-email" attempts to pick up valid e-mails from the
trailers, but people in real world write non-addresses there, like
"Cc: Stable <add@re.ss> # 4.8+", which broke the output depending
on the availability and vintage of Mail::Address perl module.
* mm/send-email-cc-cruft-after-address:
Git.pm: add comment pointing to t9000
t9000-addresses: update expected results after fix
parse_mailboxes: accept extra text after <...> address
A recently graduated topic regressed "git rev-list --header"
output, breaking "gitweb". This has been fixed.
* jk/diff-submodule-diff-inline:
rev-list: use hdr_termination instead of a always using a newline
A hot-fix for a test added by a recent topic that went to both
'master' and 'maint' already.
* tg/add-chmod+x-fix:
t3700: fix broken test under !SANITY
More i18n.
* va/i18n:
i18n: diff: mark warnings for translation
i18n: credential-cache--daemon: mark advice for translation
i18n: convert mark error messages for translation
i18n: apply: mark error message for translation
i18n: apply: mark error messages for translation
i18n: apply: mark info messages for translation
i18n: apply: mark plural string for translation
When fetching from a remote that has many tags that are irrelevant
to branches we are following, we used to waste way too many cycles
when checking if the object pointed at by a tag (that we are not
going to fetch!) exists in our repository too carefully.
* jk/fetch-quick-tag-following:
fetch: use "quick" has_sha1_file for tag following
"git rebase" immediately after "git clone" failed to find the fork
point from the upstream.
* jk/merge-base-fork-point-without-reflog:
merge-base: handle --fork-point without reflog
In a worktree connected to a repository elsewhere, created via "git
worktree", "git checkout" attempts to protect users from confusion
by refusing to check out a branch that is already checked out in
another worktree. However, this also prevented checking out a
branch, which is designated as the primary branch of a bare
reopsitory, in a worktree that is connected to the bare
repository. The check has been corrected to allow it.
* dk/worktree-dup-checkout-with-bare-is-ok:
worktree: allow the main brach of a bare repository to be checked out
The GPG verification status shown in "%G?" pretty format specifier
was not rich enough to differentiate a signature made by an expired
key, a signature made by a revoked key, etc. New output letters
have been assigned to express them.
* mg/gpg-richer-status:
gpg-interface: use more status letters
"git ls-files" learned "--recurse-submodules" option that can be
used to get a listing of tracked files across submodules (i.e. this
only works with "--cached" option, not for listing untracked or
ignored files). This would be a useful tool to sit on the upstream
side of a pipe that is read with xargs to work on all working tree
files from the top-level superproject.
* bw/ls-files-recurse-submodules:
ls-files: add pathspec matching for submodules
ls-files: pass through safe options for --recurse-submodules
ls-files: optionally recurse into submodules
git: make super-prefix option
"git diff/log --ws-error-highlight=<kind>" lacked the corresponding
configuration variable to set it by default.
* jc/ws-error-highlight:
diff: introduce diff.wsErrorHighlight option
diff.c: move ws-error-highlight parsing helpers up
diff.c: refactor parse_ws_error_highlight()
t4015: split out the "setup" part of ws-error-highlight test
Instead of referencing "stash@{n}" explicitly, make it possible to
simply reference as "n". Most users only reference stashes by their
position in the stash stack (what I refer to as the "index" here).
The syntax for the typical stash (stash@{n}) is slightly annoying and
easy to forget, and sometimes difficult to escape properly in a
script. Because of this the capability to do things with the stash by
simply referencing the index is desirable.
This patch includes the superior implementation provided by Øsse Walle
(thanks for that), with a slight change to fix a broken test in the test
suite. I also merged the test scripts as suggested by Jeff King, and
un-wrapped the documentation as suggested by Junio Hamano.
Signed-off-by: Aaron M Watson <watsona4@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
When an MSYS program (such as the bash that drives the test suite)
invokes git on Windows, absolute Unix style paths are transformed into
Windows native absolute paths (drive letter form). However, this
transformation also includes some simplifications that are not just
straight-forward textual substitutions:
- When the path ends in "/.", then the dot is stripped, but not the
directory separator.
- When the path contains "..", then it is optimized away if possible,
e.g., "/c/dir/foo/../bar" becomes "c:/dir/bar".
These additional transformations violate the assumptions of some
submodule path tests. We can avoid them when the input is already a
Windows native path, because then MSYS leaves the path unmolested.
Convert the uses of $PWD to $(pwd); the latter returns a native Windows
path.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ita entries are dropped at tree generation phase. If the entire index
consists of just ita entries, the result would be a a commit with no
entries, which should be caught unless --allow-empty is specified. The
test "!!active_nr" is not sufficient to catch this.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If i-t-a entries are present and there is no change between the index
and HEAD i-t-a entries, index_differs_from() still returns "dirty, new
entries" (aka, the resulting commit is not empty), but cache-tree will
skip i-t-a entries and produce the exact same tree of current
commit.
index_differs_from() is supposed to catch this so we can abort
git-commit (unless --no-empty is specified). Update it to optionally
ignore i-t-a entries when doing a diff between the index and HEAD so
that it would return "no change" in this case and abort commit.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option --ita-invisible-in-index exposes the "ita_invisible_in_index"
diff flag to outside to allow easier experimentation with this new mode.
The "plan" is to make --ita-invisible-in-index default to keep consistent
behavior with 'status' and 'commit', but a bunch other commands like
'apply', 'merge', 'reset'.... need to be taken into consideration as well.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
